What would you do if you were grounded from your iPad and computer, phone or any electronics?

What would you do if you were grounded from your iPad and computer, phone or any electronics?
by

1 Answer

Answer :

I would not talk until I get them back!!
by

Related questions

What would you do if you had to give up your computer, cell phone, iPod, or other electronics?

Description : What would you do if you had to give up your computer, cell phone, iPod, or other electronics?

Last Answer : I would play guitar and write songs.

Which among the following characteristics are correct about 'Cyberstalking': a) Cyberstalking is the use of the internet or electronics to stalk or harass an individual or any group. b) It includes making harassing phone calls, killing the victims pet, vandalizing victims property, leaving written messages or objects c) It may be offline as well as online d) All of the Above e) None of These

Description : Which among the following characteristics are correct about 'Cyberstalking': a) Cyberstalking is the use of the internet or electronics to stalk or harass an individual or any group. b) It includes making harassing phone ... ) It may be offline as well as online d) All of the Above e) None of These

Last Answer : d) All of the Above

I cannot open yahoo mail from my iPad/phone. It says it cannot connect to the server. But I can get on safari.

Description : I cannot open yahoo mail from my iPad/phone. It says it cannot connect to the server. But I can get on safari.

Last Answer : The Yahoo servers could be down.

What if Apple had included a built-in phone in the iPad ?

Description : What if Apple had included a built-in phone in the iPad ?

Last Answer : People are already morons, but their wrists might begin to ache.

Can we use something other than electricity to power our electronics and computer chips? (Details inside )

Description : Can we use something other than electricity to power our electronics and computer chips? (Details inside )

Last Answer : Electrons have to move for “Electronics” to work. Quarks and neutrinos don’t move electrons for computer chips.

Cheap computer/electronics store/site in London (or the UK)?

Description : Cheap computer/electronics store/site in London (or the UK)?

Last Answer : answer:If you are in London go to Tottenham Court Road, there’s basically nothing there other than computer shops. or you could try http://www.dabs.com

Who designed the first electronics computer ? ENIAC/ A) Von Neumann B) Joseph M Jacquard C) J. P. Eckert and J. W. Mauchly D) All of above

Description : Who designed the first electronics computer ? ENIAC/ A) Von Neumann B) Joseph M Jacquard C) J. P. Eckert and J. W. Mauchly D) All of above

Last Answer : Answer : C

Which of the following computer implemented binary numbers, perform calculations using electronics and implemented separate computation and memory for the first time? A) Mark I B) ABC C) Z3 D) None of above

Description : Which of the following computer implemented binary numbers, perform calculations using electronics and implemented separate computation and memory for the first time? A) Mark I B) ABC C) Z3 D) None of above

Last Answer : Answer : B

What was the first computer to perform all calculation using electronics rather than wheels, ratchets, or mechanical switches? A) Mark I B) ABC C) Z3 D) None of above

Description : What was the first computer to perform all calculation using electronics rather than wheels, ratchets, or mechanical switches? A) Mark I B) ABC C) Z3 D) None of above

Last Answer : Answer : B

Detroit, USA is associated with _________ industry. A. Automobile B. Computer C. Toys D. Electronics

Description : Detroit, USA is associated with _________ industry. A. Automobile B. Computer C. Toys D. Electronics

Last Answer : ANSWER: A

Detroit, USA is associated with _________ industry. A. Automobile B. Computer C. Toys D. Electronics

Description : Detroit, USA is associated with _________ industry. A. Automobile B. Computer C. Toys D. Electronics

Last Answer : ANSWER: A

Detroit, USA is associated with _________ industry. A. Automobile B. Computer C. Toys D. Electronics

Description : Detroit, USA is associated with _________ industry. A. Automobile B. Computer C. Toys D. Electronics

Last Answer : ANSWER: A

The 'sunrise industries' imply - (1) petrochemicals and electronics industry (2) sunflower oil industry (3) computer industry (4) chemical industry

Description : The 'sunrise industries' imply - (1) petrochemicals and electronics industry (2) sunflower oil industry (3) computer industry (4) chemical industry

Last Answer : (1) petrochemicals and electronics industry Explanation: Sunrise Industry is a colloquial term for a sector or business that is in its infancy, but is growing at a rapid pace. A sunrise ... of venture capital funding. A sunrise industry is often characterized by a high degree of innovation.

Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Description : Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Last Answer : A : Computer Engineering

Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Description : Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Last Answer : A : Computer Engineering

Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Description : Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Last Answer : A : Computer Engineering

Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Description : Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Last Answer : A : Computer Engineering

Who designed the first electronics computer – ENIAC? a. Van-Neumann b. Joseph M. Jacquard c. J. Presper Eckert and John W Mauchly d. All of above

Description : Who designed the first electronics computer – ENIAC? a. Van-Neumann b. Joseph M. Jacquard c. J. Presper Eckert and John W Mauchly d. All of above

Last Answer : J. Presper Eckert and John W Mauchly

Which was first computer company: a) Digital Electronics b) Com-Techno Limited c) Electronic Controls Company d) None of These

Description : Which was first computer company: a) Digital Electronics b) Com-Techno Limited c) Electronic Controls Company d) None of These

Last Answer : c) Electronic Controls Company

Robot is a combined creation of mechanical,electrical,electronics and computer engineering. (A) False (B) True

Description : Robot is a combined creation of mechanical,electrical,electronics and computer engineering. (A) False (B) True

Last Answer : B

What type of disk drive interface has most of the electronics on a controller card mounted in the host computer?

Description : What type of disk drive interface has most of the electronics on a controller card mounted in the host computer?

Last Answer : ST-506/412 interface.

Who designed the first electronics computer – ENIAC? a. Van-Neumann b. Joseph M. Jacquard c. J. Presper Eckert and John W Mauchly d. All of above

Description : Who designed the first electronics computer – ENIAC? a. Van-Neumann b. Joseph M. Jacquard c. J. Presper Eckert and John W Mauchly d. All of above

Last Answer : c. J. Presper Eckert and John W Mauchly

Who designed the first electronics computer – ENIAC? a. Van-Neumann b. Joseph M. Jacquard c. J. Presper Eckert and John W Mauchly d. All of above

Description : Who designed the first electronics computer – ENIAC? a. Van-Neumann b. Joseph M. Jacquard c. J. Presper Eckert and John W Mauchly d. All of above

Last Answer : c. J. Presper Eckert and John W Mauchly

The ‘sunrise industries’ imply (1) petrochemicals and electronics industry (2) sunflower oil industry (3) computer industry (4) chemical industry

Description : The ‘sunrise industries’ imply (1) petrochemicals and electronics industry (2) sunflower oil industry (3) computer industry (4) chemical industry

Last Answer :  petrochemicals and electronics industry

Why do we call sending a child to his/her room as "grounded" ?

Description : Why do we call sending a child to his/her room as "grounded" ?

Last Answer : It was originally a piloting term that got borrowed by parents. When pilots aren't allowed to fly for some reason-including bad behavior-they are said to be grounded (since they are stuck on the ... want, the term got applied in that context as well (originally as slang, but then it stuck).

How can I calculate the ground reaction of a grounded ship？?

Description : How can I calculate the ground reaction of a grounded ship？?

Last Answer : ‘reaction’? What do you mean? When it tips? If the hull tears?

Do you know anyone who was never grounded as a child?

Description : Do you know anyone who was never grounded as a child?

Last Answer : Yes. Me (and my kids).

Does anybody know any ways to not get grounded?

Description : Does anybody know any ways to not get grounded?

Last Answer : Don’t mention it until he does. Then you can interrupt with, “I’ve been thinking about it a lot and I’m really sorry I used language Iike that.” If you don’t get punished, of course, you’ll have to watch your language. If he still insists on punishment, take it like a man.

I am really struggling in algebra, and I'm afraid I'll be grounded if I fail. Any suggestions?

Description : I am really struggling in algebra, and I'm afraid I'll be grounded if I fail. Any suggestions?

Last Answer : Ask for help.

Is it bad that our washer and dryer are plugged into non-grounded outlets?

Description : Is it bad that our washer and dryer are plugged into non-grounded outlets?

Last Answer : answer:You should absolutely be concerned. Here is some simple knowledge most people don't know. A power strip prevents your stuff from getting hurt. And it does a very bad job it it. Grounding keeps ... law is a licensed electrician and we had a long talk about this one night about 10 years ago.

Have you ever digitally grounded your kids?

Description : Have you ever digitally grounded your kids?

Last Answer : I was digitally grounded about four years ago, and oh man it was horrible, I felt disconnected, out of the loop and generally made me very moody, for the first work I resented my mother. ... shops, housekeeping and looking after my younger sister. Safe to say i'm happy I was digitally grounded.

What is the best way to clean grounded-in cat feces?

Description : What is the best way to clean grounded-in cat feces?

Last Answer : Oh, brother. Can you afford the guys who steam clean carpets (is it a carpet issue or wooden floors)?

One end of a cylindrical rod is grounded to a hemispherical surface of radius`R=20mm`.It is immersed in water`(mu=4//3)`.If the refractive index of th

Description : One end of a cylindrical rod is grounded to a hemispherical surface of radius`R=20mm`.It is immersed in water`(mu=4//3)`.If the refractive index of th

Last Answer : One end of a cylindrical rod is grounded to a hemispherical surface of radius`R=20mm`.It is immersed in water`(mu ... is ................(determine)

To draw the maximum current from a combination of cells, how should be the cells be grounded ?

Description : To draw the maximum current from a combination of cells, how should be the cells be grounded ?

Last Answer : To draw the maximum current from a combination of cells, how should be the cells be ... of internal and external resistance D. Mixed grouping

What does it mean to say that a conducter is grounded?

Description : What does it mean to say that a conducter is grounded?

Last Answer : It means the conductor insulation failed and come in contactwith ground or earth.

Which of the following statements concerning electrical cables is correct? A. Where they pass through watertight bulkheads, they should be fitted with watertight stuffing boxes. B. Electric cable coverings should never be grounded. C. Electrical cables must be rigidly held in place by welding of armored cable, or glued in place where nonmetallic insulation is used. D. All of the above.

Description : Which of the following statements concerning electrical cables is correct? A. Where they pass through watertight bulkheads, they should be fitted with watertight stuffing boxes. B. Electric cable coverings should ... , or glued in place where nonmetallic insulation is used. D. All of the above.

Last Answer : Answer: A

All electric cables passing through watertight bulkheads must be _____________. A. installed with watertight stuffing tubes B. grounded on both sides of the bulkhead C. fitted with unions on each side of the bulkhead D. welded on both sides of the bulkhead

Description : All electric cables passing through watertight bulkheads must be _____________. A. installed with watertight stuffing tubes B. grounded on both sides of the bulkhead C. fitted with unions on each side of the bulkhead D. welded on both sides of the bulkhead

Last Answer : Answer: A

According to Coast Guard Regulations (46 CFR), the talking and calling circuits of a sound powered telephone system must be _____________. A. intrinsically safe B. independent of each other C. independently grounded D. connected to a common ground

Description : According to Coast Guard Regulations (46 CFR), the talking and calling circuits of a sound powered telephone system must be _____________. A. intrinsically safe B. independent of each other C. independently grounded D. connected to a common ground

Last Answer : Answer: B

When using the test set-up shown in the illustration, the lighted lamp indicates the winding is ____________. EL-0027 A. grounded B. good C. open D. shorted

Description : When using the test set-up shown in the illustration, the lighted lamp indicates the winding is ____________. EL-0027 A. grounded B. good C. open D. shorted

Last Answer : Answer: A

When using a megohmmeter to determine which shunt field coil is grounded in a DC machine, you must ____________. A. insulate the field frame from the ship's hull B. disconnect each shunt field coil before testing C. use a motor driven high capacity megohmmeter D. remove all main line lead connections before testing

Description : When using a megohmmeter to determine which shunt field coil is grounded in a DC machine, you must ____________. A. insulate the field frame from the ship's hull B. disconnect each shunt ... C. use a motor driven high capacity megohmmeter D. remove all main line lead connections before testing

Last Answer : Answer: B

In preparing to take insulation resistance readings on a main generator, the windings should be grounded for about 15 minutes prior to the test to _____________. A. allow accurate zeroing of the meter B. help the windings to cool to ambient temperature C. release any residual capacitive charge from the windings D. help the windings to cool to the same temperature as the ground test connection

Description : In preparing to take insulation resistance readings on a main generator, the windings should be grounded for about 15 minutes prior to the test to _____________. A. allow accurate zeroing of the meter ... the windings D. help the windings to cool to the same temperature as the ground test connection

Last Answer : Answer: C

Which of the listed conditions might contribute to very rapid wearing of a DC machine's commutator bars? A. A grounded commutator bar B. Using improper carbon brushes C. Aligning the front and rear mica V-rings improperly D. An open circuit in the armature

Description : Which of the listed conditions might contribute to very rapid wearing of a DC machine's commutator bars? A. A grounded commutator bar B. Using improper carbon brushes C. Aligning the front and rear mica V-rings improperly D. An open circuit in the armature

Last Answer : Answer: B

An open armature connection in a DC propulsion motor could be caused by ____________. A. low-load operation B. clogged ventilation ducts C. sparking at the brushes D. a grounded shunt field coil

Description : An open armature connection in a DC propulsion motor could be caused by ____________. A. low-load operation B. clogged ventilation ducts C. sparking at the brushes D. a grounded shunt field coil

Last Answer : Answer: B

When a megohmmeter is being used on a alternating current machine, the meter pointer will dip toward 'zero' and then gradually rise to the true resistance value if the motor insulation is _____________. A. grounded B. good C. shorted D. dirty

Description : When a megohmmeter is being used on a alternating current machine, the meter pointer will dip toward 'zero' and then gradually rise to the true resistance value if the motor insulation is _____________. A. grounded B. good C. shorted D. dirty

Last Answer : Answer: B

A circuit that has one of two wires in contact with the hull of a ship, is called a _____________. A. grounded circuit B. short circuit C. series circuit D. closed circuit

Description : A circuit that has one of two wires in contact with the hull of a ship, is called a _____________. A. grounded circuit B. short circuit C. series circuit D. closed circuit

Last Answer : Answer: A

If all of the ground detection lamps burn with equal brilliance, whether the test button is depressed or released, then ___________. A. no grounds exist B. all phases are grounded C. all lamps show a ground D. all of the above

Description : If all of the ground detection lamps burn with equal brilliance, whether the test button is depressed or released, then ___________. A. no grounds exist B. all phases are grounded C. all lamps show a ground D. all of the above

Last Answer : Answer: A

A circuit with a blown fuse would be described as a/an _____________. A. short circuit B. open circuit C. bonded circuit D. grounded circuit

Description : A circuit with a blown fuse would be described as a/an _____________. A. short circuit B. open circuit C. bonded circuit D. grounded circuit

Last Answer : Answer: B

In the illustrated test, if the lamp fails to light on any of the three windings then _________. EL-0027 A. all three windings are grounded and the motor should be sent out for repair B. the brushes should be set back on the commutator and the test redone C. the ground is not in the windings and the connections to the motor controller and the controller should be checked D. the test should be redone at a higher voltage

Description : In the illustrated test, if the lamp fails to light on any of the three windings then _________. EL-0027 A. all three windings are grounded and the motor should be sent out for repair B. ... the motor controller and the controller should be checked D. the test should be redone at a higher voltage

Last Answer : Answer: C

In the illustration, the tan and white wires are connected to the solenoid valve. The solinoid valve is_________. EL-0043 A. in the liquid line before the TXV B. energized and open whenever the unit is plugged in C. not grounded so the unit must be modified before using aboard ship D. the water inlet for the ice maker

Description : In the illustration, the tan and white wires are connected to the solenoid valve. The solinoid valve is_________. EL-0043 A. in the liquid line before the TXV B. energized and open whenever the unit ... so the unit must be modified before using aboard ship D. the water inlet for the ice maker

Last Answer : Answer: D