Description : Loss of thiamin can be decreased by using (A) Unpolished rice (B) Parboiled rice (C) Whole wheat flour (D) All of these
Last Answer : Answer : D
Description : Unpolished rice is a rich source of which vi- tamin?
Last Answer : Thiamine (Vitamin B1)
Description : Which of the following is not a characteristic observed in material failure by fatigue fracture? (A) Plastic deformation of material does not occur (B) Initiation of crack from below the surface does ... (D) Presence of both rough & smooth zone with conchoidal markings in smooth zone of the surface
Last Answer : Option B
Description : A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as 1. Shift 2. Sand wash 3. Swell 4. Scab
Last Answer : A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as Sand wash
Description : A ray of white light strikes the surface of an object. If all the colours are reflected, the surface would appear (1) Black (2) White (3) Grey (4) Opaque
Last Answer : (2) White Explanation: Objects do not have any colour of their own. When light hits a surface, some of it is absorbed and some of it is reflected. The light that is reflected is ... appear white when they reflect all the wavelengths; they appear black when they absorb all visible wavelengths.
Description : Pick up the correct statement from the following: (A) According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight (B) According to ... glassy, smooth, granular, rough, crystalline, honey combed and porous (D) All the above
Last Answer : Answer: Option D
Description : A light wave enters a sheet of glass at a perfect right angle to the surface. Is the majority of the wave reflected, refracted, transmitted, or absorbed?
Last Answer : Transmitted.
Description : The term dispersion describes the process of ∙ A. separating light into its component frequencies ∙ B. reflecting light from a smooth surface ∙ C. the process by which light is absorbed by an uneven rough surface ∙ D. light scattering
Last Answer : A. separating light into its component frequencies
Description : An incident ray can be defined as ∙ A. a light ray reflected from a flat surface ∙ B. a light directed toward a surface ∙ C. a diffused light ray ∙ D. a light ray that happens periodically
Last Answer : ∙ B. a light directed toward a surface
Description : The termdispersion describestheprocessof a.separatinglightinto its componentfrequencies b. reflecting light from a smooth surface c. the process by which light is absorbed by an uneven rough surface d. light scattering
Last Answer : a.separatinglightinto its componentfrequencies
Description : Anincidentraycan be defined as a. a light ray reflected from a flat surface b. alight raydirectedtowardasurface c. a diffused light ray d. a light ray that happens periodically
Last Answer : b. alight raydirectedtowardasurface
Description : Newton's rings are formed because of interference between the light Reflected from (a) Upper surface of Plano-convex lens and lower surface of plane glass plate (b) Lower surface of Plano-convex ... c) Lower and upper surface of Plano-convex (d) Lower and upper surfaces of plane glass plate
Last Answer : (b) Lower surface of Plano-convex lens and upper surface of plane glass plate
Description : When a light ray travelling in glass is incident on an air surface, A. it will refract away from the normal B. some of the light may be reflected C. all of the light may be reflected D. two of A, B, and C E. all of A, B, and C
Last Answer : E. all of A, B, and C
Description : When light falls on shiny surface it gets __________ . a) refracted b)reflected c)bent d)nothing happens
Last Answer : b)reflected
Description : A light ray traveling from glass into air strikes the glass-air surface at an angle 50 degrees to the normal. If the critical angle for the glass-air combination is 42 degrees, the percentage of light reflected from the surface is w) 6 x) 25 y) 38 z) 100
Last Answer : ANSWER: Z -- 100
Description : When light is reflected from a surface, the angle of incidence is: w) 30 degrees x) equal to the angle of reflection y) 90 degrees z) 180 degrees
Last Answer : ANSWER: X -- EQUAL TO THE ANGLE OF REFLECTION
Description : Assume a ray of light is incident on a smooth reflecting surface at an angle of incidence of 15 degrees to the normal. What is the angle between the incident ray and the reflected ray?
Last Answer : ANSWER: 30 DEGREES
Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above
Last Answer : c. Indeterminate
Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction
Last Answer : c. Determinate but depends on the acceleration of the cylinder
Description : Cockoach moves on the rough surface by_____.
Last Answer : Cockoach moves on the rough surface by_____. A. Arolium B. Pulvilus C. Claw D. Plantulae
Description : A body of mass 37 kg rests on a rough horizontal surface. The minimum horizontal force required to just start the motion
Last Answer : A body of mass 37 kg rests on a rough horizontal surface. The minimum horizontal force required to just start the ... ) µs = 0.188 b) µk = 0.118
Description : The rough surface of a horizontal table offers a definite maximum opposing force to initiate the motion of a block along with the table,
Last Answer : The rough surface of a horizontal table offers a definite maximum opposing force to initiate the motion of ... of F2 adds up to the opposing force.
Description : Is it true that more force must be applied when pushing something across rough surface?
Last Answer : What is the answer ?
Description : A person can jump higher on the moon's surface than on the earth because – (1) the moon's surface is rough (2) the acceleration due to gravity in moon is smaller than that on the earth. (3) the moon is cooler than earth (4) the moon has no atmosphere
Last Answer : (2) the acceleration due to gravity in moon is smaller than that on the earth. Explanation: The acceleration due to the gravitational field of moon (g' = 1.62631 ms-2) is one-sixth of the acceleration due ... earth. It is due to this reason; a man can jump six times higher on moon than on earth.
Description : Wireless communication is reflected back to the earth’s surface by the which zone?
Last Answer : Ionsphere
Description : What is the percentage of radiant energy reflected back by surface called?
Last Answer : Albedo
Description : A __________ surface has the maximum thermal emissivity out of the following. (A) Black & smooth (B) Black & rough (C) White & smooth (D) White & rough
Last Answer : (B) Black & rough
Description : A hot body will radiate heat most rapidly, if its surface is (A) White & rough (B) Black & rough (C) White & polished (D) Black & polished
Description : Out of 100 kcal/second of incident radiant energy on the surface of a thermally transparent body, 300 kcal/second is reflected back. If the transmissivity of the body is 0.25, the emissivity of the surface will be (A) 0.35 (B) 0.45 (C) 0.55 (D) 0.85
Last Answer : (B) 0.45
Description : Find the permittivity of the surface when a wave incident at an angle 60 is reflected by the surface at 45 in air. a) 1.41 b) 3.5 c) 2.2 d) 1.73
Last Answer : d) 1.73
Description : A wave incident on a surface at an angle 60 degree is having field intensity of 6 units. The reflected wave is at an angle of 30 degree. Find the field intensity after reflection. a) 9.4 b) 8.4 c) 10.4 d) 7.4
Last Answer : c) 10.4
Description : In the equation of virtual work, following force is neglected (A) Reaction of any smooth surface with which the body is in contact (B) Reaction of a rough surface of a body which rolls on it without ... an axis, fixed in space, around which a body is constrained to turn (D) All of the above
Last Answer : (D) All of the above
Description : Consider the following statements regarding Coulomb's theory of earth pressure: 1. It is based on wedge theory of earth pressure. 2. It assumes the wall surface to be rough. 3. It may or may not satisfy the static equilibrium condition ... 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only
Last Answer : (b) 1 & 2 only
Description : When a wave is reflected from a surface, energy is transferred. When is the transfer of energy greatest?
Last Answer : When the incident wave is nearly parallel with the surface.
Description : What is one of the major reasons for the fading of radio waves which have been reflected from a surface?
Last Answer : Shifting in the phase relationships of the wave.
Description : When a wave is reflected from a surface, energy is reflected. When is the reflection of energy the greatest?
Last Answer : When the wave is nearly parallel to the reflecting surface.
Description : Charpy impact tests showing a rough torn surface after the completed test, this would indicate which type of failure? a) Fatigue b) Ductile c) Fatigue to ductile d) Brittle
Last Answer : b) Ductile
Description : In regard to the enamel surface: A. It is a perfect substance for bonding B. It does not conform to the bonding requirements C. It is the most inorganic, rough part D. It is free from contamination and roughness E. None of the above
Last Answer : B. It does not conform to the bonding requirements
Description : Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests
Last Answer : B. To minimise the retention of plaque
Description : Rough surface/Porosity of porcelain is a result of: A. Lack of compression/ condensation B. Sudden high temperature
Last Answer : A. Lack of compression/ condensation
Description : The mechanical cleaning of sugar cane is done due to A. The different in the peripheral velocity of rollers B. Rough surface provided Or the outer surface of rollers C. Blow of air which forces the extraneous material out of the machine D. All of the above
Last Answer : D. All of the above
Description : Standing waves are formed when two sets of waves of equal amplitude and frequency w) are in phase x) are in opposite phase y) move through each other in opposite directions z) are reflected from the same surface
Last Answer : ANSWER: Y -- MOVE THROUGH EACH OTHER IN OPPOSITE DIRECTIONS
Description : What is the name given to the term that defines the proportion of the incident solar radiation which is diffusely reflected from the atmosphere and surface of the planet back into outer space?
Last Answer : ANSWER: ALBEDO
Description : 1. Which vitamin is necessary for blood clotting? 2. Which can be abolished but not dissolved? 3. What does Talc contains? 4. What is the percentage of radiant energy reflected back by ... which countries? 20. The extent of the Delhi Sultanate empire was the greatest during which reign?
Last Answer : Answer : 1. Vitamin K 2. State Legislative Council 3. Magnesium, silicon and oxygen 4. Albedo 5. Nalanda 6. Vijay Kelkar 7. 1 percent 8. Lemurs 9. Mild rainfall 10. Mahayana sect 11. From ... 16. National income 17. Liver 18. Both Houses of Parliament 19. Sumatra and Malaysia 20. Alauddin Khilji
Description : A person can jump higher on the moon’s surface than on the earth because : (1) the moon’s surface is rough (2) the acceleration due to gravity in moon is smaller than that on the earth. (3) the moon is cooler than earth (4) the moon has no atmosphere
Last Answer : the acceleration due to gravity in moon is smaller than that on the earth.
Description : Is light reflected from human eyes?
Last Answer : Yes, that is the “red eye in flash photo”, it is caused by the red is the retina reflecting.
Description : Explain why a ray of light passing through the centre of curvature of concave minor gets reflected along the same path. -Science
Last Answer : The light falling on the centre of curvature is reflected back along the same path because incident ray falls on the mirror along the normal to the reflecting surface.
Description : What kind of light is reflected in the mirror ?
Last Answer : Regular reflection of light occurs in the mirror.
Description : A plane mirror rotating at an angular velocity of 3 radian/s reflects a light beam. The angular velocity of the reflected beam is -
Last Answer : A plane mirror rotating at an angular velocity of 3 radian/s reflects a light beam. The angular velocity of the reflected beam is -
Description : Is blue light reflected by green leaf?
Last Answer : Need answer