The dark, smooth surface areas of the Moon are known as -General Knowledge

The dark, smooth surface areas of the Moon are known as -General Knowledge
by

1 Answer

Answer :

D. Craters are the dark spots on the moon.
by

Related questions

What dark smooth plain on the surface of the moon?

Description : What dark smooth plain on the surface of the moon?

Last Answer : Need answer

The large dark patches on the Moon’s surface are known as------? A. Dark matter B. Maria, or seas, even though there is no water on the Moon (Answer) C. Maria, or seas, because they are filled with water

Description : The large dark patches on the Moon’s surface are known as------? A. Dark matter B. Maria, or seas, even though there is no water on the Moon (Answer) C. Maria, or seas, because they are filled with water

Last Answer : B. Maria, or seas, even though there is no water on the Moon (Answer)

Good oral hygiene and fluoridation is LEAST useful in preventing caries of: A. Pit and fissure B. Smooth surface C. Inaccessible areas

Description : Good oral hygiene and fluoridation is LEAST useful in preventing caries of: A. Pit and fissure B. Smooth surface C. Inaccessible areas

Last Answer : A. Pit and fissure

The diameter of the moon is approximately one fourth of the diameter of the earth. Find the ratio of their surface areas -Maths 9th

Description : The diameter of the moon is approximately one fourth of the diameter of the earth. Find the ratio of their surface areas -Maths 9th

Last Answer : If diameter of earth is said d, then the diameter of moon will be d/4 (as per given statement) Radius of earth = d/2 Radius of moon = ½×d/4 = d/8 Surface area of moon = 4π(d/8)2 Surface area of earth = 4π(d/2)2 Ncert solutions class 9 chapter 13-6

need identity of tree size plant in FL, red berries, dark smooth bark, not a Brazilian pepper

Description : need identity of tree size plant in FL, red berries, dark smooth bark, not a Brazilian pepper

Last Answer : Black Cherry: Chokecherry's Bitter Cousin Prunus serotina: The Better Late than Never Cherry In central Florida the most common edible cherry we see is the Black Cherry, Prunus serotina (sair-OTT-ih- ... bark. You can cook the cherries with their stones and then separate. Throw the stones away.

Dark with white markings, And smooth like a rock. Where learning occurs, I help convey thought. What am I? -Riddles

Description : Dark with white markings, And smooth like a rock. Where learning occurs, I help convey thought. What am I? -Riddles

Last Answer : Blackboard/chalkboard.

(CBSE 2011): Aditi observed following observations while looking into a permanent slide. (i) Cells are long and cylindrical (ii) Light and dark bands are present. It could be a slide of : (a) striated muscle fibre (b) smooth muscle fibre (c) neuron (d) parenchyma cells

Description : (CBSE 2011): Aditi observed following observations while looking into a permanent slide. (i) Cells are long and cylindrical (ii) Light and dark bands are present. It could be a slide of : (a) striated muscle fibre (b) smooth muscle fibre (c) neuron (d) parenchyma cells

Last Answer : (a) striated muscle fibre

Identification of Calcite in sedimentary rock can be done by using (A) the rock will glow in the dark (B) the rock will break to form smooth surfaces (D) the rock will taste salty (C) hydrochloric acid will cause the calcite to fizz

Description : Identification of Calcite in sedimentary rock can be done by using (A) the rock will glow in the dark (B) the rock will break to form smooth surfaces (D) the rock will taste salty (C) hydrochloric acid will cause the calcite to fizz

Last Answer : hydrochloric acid will cause the calcite to fizz

What is the term applied to the dark, relatively smooth LUNAR plains whose name is derived from the Latin for "sea"?

Description : What is the term applied to the dark, relatively smooth LUNAR plains whose name is derived from the Latin for "sea"?  

Last Answer : ANSWER: MARE (singular) or MARIA (plural)

Within the deeper craters of the dark side of the moon, would it be possible to have an 'atmosphere' of any gas within this crater?

Description : Within the deeper craters of the dark side of the moon, would it be possible to have an 'atmosphere' of any gas within this crater?

Last Answer : There is no such thing as the dark side of the Moon, or at least there is no area that is always dark. The Moon has a side that always faces Earth. When we see a full moon, the far side is ... in the dark, there might be a very thin atmosphere, but not much since the Moon's gravity is fairly weak.

Who is the female background singer on Pink Floyds album "Dark Side of the Moon"?

Description : Who is the female background singer on Pink Floyds album "Dark Side of the Moon"?

Last Answer : Clare Torry is a British singer, best known for her soulfully evocative wordless vocals on Pink Floyd’s “The Great Gig in the Sky” on the 1973 album The Dark Side of the Moon.

All the electricity was out in town and none of the street lights or traffic signals had power. A dark limousine was cruising down the newly paved blacktop, with its headlights off. A young boy dressed totally in black (with no reflectors) stepped out to cross the street. The moon wasn't out and the boy had no flashlight, yet the driver stopped to let the boy cross the street. How did the driver see the boy? -Riddles

Description : All the electricity was out in town and none of the street lights or traffic signals had power. A dark limousine was cruising down the newly paved blacktop, with its headlights off. A young boy dressed ... the driver stopped to let the boy cross the street. How did the driver see the boy? -Riddles

Last Answer : The driver saw the boy because it was during the daylight hours.

Moon Most Dark Place Name What ?

Last Answer : Moon Most Dark Place Name ' Ross The sea '

Why is one side of the moon called the dark side the moon?

Description : Why is one side of the moon called the dark side the moon?

Last Answer : 'Dark side' is really a misnomer. The entire moon experiences daylight and night time, just as earth does. However, a full day (analogous to earth's 24 hour day) is an entire lunar cycle long on the ... used as meaning 'unseeable' or 'mysterious') Now days it is more commonly known as the Far Side.

When the near side of the moon is dark it is called a full moon true or false?

Description : When the near side of the moon is dark it is called a full moon true or false?

Last Answer : It is false.

What is the connection between Pink Floyds album The Dark Side Of The Moon and the 1939 classic film The Wizard Of Oz?

Description : What is the connection between Pink Floyds album The Dark Side Of The Moon and the 1939 classic film The Wizard Of Oz?

Last Answer : Well, the first article to tie the two works together was a piece called "The Dark Side Of The Rainbow," written in August 1995 by Charles Savage of The Fort Wayne Journal Gazette. He noted that ... said the theory merely came from an internet post...which cited "some people down in Los Angeles."

why is one side of the moon called "the dark side of the moon "?

Description : why is one side of the moon called "the dark side of the moon "?

Last Answer : It is called the dark side of the moon because it never faces the earth, this is caused by the fact that the moon's rotation is the same number of days as it's revolution around the earth. Even though ... Moon" face turned toward the Earth, and the other, hidden side is the "far side of the Moon".

Why is one side of the moon called the dark side of the moon?

Description : Why is one side of the moon called the dark side of the moon?

Last Answer : The side of the moon that we can never see from Earth is often called the "dark side" (a) because it sounds cool, and (b) because darkness is a powerful metaphor for the unknown. In fact, the so- ... moon, Luna, keeps one side to its primary continually (there's a little wobble, so we can really s

Why is one side of the moon called the dark side of the moon?

Description : Why is one side of the moon called the dark side of the moon?

Last Answer : The side of the moon that we can never see from Earth is often called the "dark side" (a) because it sounds cool, and (b) because darkness is a powerful metaphor for the unknown. In fact, the so- ... moon, Luna, keeps one side to its primary continually (there's a little wobble, so we can really s

I just high lighted my hair, going from dark brown to a golden almost blonde in some areas. What can I use to lighten my eyebrows just a tad?

Description : I just high lighted my hair, going from dark brown to a golden almost blonde in some areas. What can I use to lighten my eyebrows just a tad?

Last Answer : My girl is a hair stylist and she recommends NEVER lightening or tinting your brows. Reason being that it will be very noticeable if the tint isn’t right and your facial complexion and features will clash. :)

squash leaf virus look almost like leaf curl dark green areas?

Description : squash leaf virus look almost like leaf curl dark green areas?

Last Answer : Need Answer

Ice is slippery when a man walks on it because a.Increase of pressure causes it to melt b.Ice is brittle c.There is no friction d.It is very chill e.Its surface is smooth

Description : Ice is slippery when a man walks on it because a.Increase of pressure causes it to melt b.Ice is brittle c.There is no friction d.It is very chill e.Its surface is smooth

Last Answer : a. Increase of pressure causes it to melt

What is the name of a smooth surface that reflects an image of what is in front of it?

Description : What is the name of a smooth surface that reflects an image of what is in front of it?

Last Answer : The reflective surface is a mirror. It can be highly polished metal or chromed, the surface of a calm area of water, or a flat glass plate with a silvered back and a protective coating.

A white and smooth surface is – (1) good absorber and good reflector of heat (2) bad absorber and good reflector of heat (3) good absorber and bad reflector of heat (4) bad absorber and bad reflector of heat

Description : A white and smooth surface is – (1) good absorber and good reflector of heat (2) bad absorber and good reflector of heat (3) good absorber and bad reflector of heat (4) bad absorber and bad reflector of heat

Last Answer : (2) bad absorber and good reflector of heat Explanation: Shiny surfaces are poor absorbers of heat radiation and the best reflectors of heat radiation. Black surfaces are the best emitters and best absorber of heat radiation.

Stone ware pipes are A. Highly resistant to sulphide corrosion B. Highly impervious C. Hydraulically efficient because of their smooth interior surface D. Especially suited to pressure pipes

Description : Stone ware pipes are A. Highly resistant to sulphide corrosion B. Highly impervious C. Hydraulically efficient because of their smooth interior surface D. Especially suited to pressure pipes

Last Answer : ANS: D

When a ray of light falls on a smooth surface and returns to the same medium, it is called?

Description : When a ray of light falls on a smooth surface and returns to the same medium, it is called?

Last Answer : Reflection of light

A white and smooth surface is

Description : A white and smooth surface is

Last Answer : Bad absorber and good reflector of Heat.

When does the heat generated by fluid friction becomes appreciable compared to the heat transferred between the fluids? (A) At high fluid velocity (B) At low velocity (C) When fluid flows past a smooth surface (D) None of these

Description : When does the heat generated by fluid friction becomes appreciable compared to the heat transferred between the fluids? (A) At high fluid velocity (B) At low velocity (C) When fluid flows past a smooth surface (D) None of these

Last Answer : (A) At high fluid velocity

Film condensation is promoted on a/an __________ surface. (A) Oily (B) Coated (C) Clean & smooth (D) Dirty

Description : Film condensation is promoted on a/an __________ surface. (A) Oily (B) Coated (C) Clean & smooth (D) Dirty

Last Answer : (C) Clean & smooth

A __________ surface has the maximum thermal emissivity out of the following. (A) Black & smooth (B) Black & rough (C) White & smooth (D) White & rough

Description : A __________ surface has the maximum thermal emissivity out of the following. (A) Black & smooth (B) Black & rough (C) White & smooth (D) White & rough

Last Answer : (B) Black & rough

The most conducive surface for dropwise condensation to occur is the __________ surface. (A) Coated (B) Oily (C) Glazed & polished (D) Smooth

Description : The most conducive surface for dropwise condensation to occur is the __________ surface. (A) Coated (B) Oily (C) Glazed & polished (D) Smooth

Last Answer : (B) Oily

Dropwise condensation is promoted on a/an __________ surface. (A) Glazed (B) Oily (C) Coated (D) Smooth

Description : Dropwise condensation is promoted on a/an __________ surface. (A) Glazed (B) Oily (C) Coated (D) Smooth

Last Answer : (B) Oily

In the equation of virtual work, following force is neglected (A) Reaction of any smooth surface with which the body is in contact (B) Reaction of a rough surface of a body which rolls on it without slipping (C) Reaction at a point or an axis, fixed in space, around which a body is constrained to turn (D) All of the above

Description : In the equation of virtual work, following force is neglected (A) Reaction of any smooth surface with which the body is in contact (B) Reaction of a rough surface of a body which rolls on it without ... an axis, fixed in space, around which a body is constrained to turn (D) All of the above

Last Answer : (D) All of the above

Rankine's theory of active earth pressure assumes (A) Soil mass is homogeneous, dry and cohesionless (B) Ground surface is a plane which may be horizontal or inclined (C) Back of the wall is vertical and smooth (D) All the above

Description : Rankine's theory of active earth pressure assumes (A) Soil mass is homogeneous, dry and cohesionless (B) Ground surface is a plane which may be horizontal or inclined (C) Back of the wall is vertical and smooth (D) All the above

Last Answer : Answer: Option D

Which of the following is not a characteristic observed in material failure by fatigue fracture? (A) Plastic deformation of material does not occur (B) Initiation of crack from below the surface does not occur (C) Initiation of crack occurs on the surface of the machine part (D) Presence of both rough & smooth zone with conchoidal markings in smooth zone of the surface

Description : Which of the following is not a characteristic observed in material failure by fatigue fracture? (A) Plastic deformation of material does not occur (B) Initiation of crack from below the surface does ... (D) Presence of both rough & smooth zone with conchoidal markings in smooth zone of the surface

Last Answer : Option B

The statement, regarding the size of stones used at the wearing surface. "The size of a stone used on a road must be in due proportion to the space occupied by a wheel of ordinary dimensions on a smooth level surface. The point of contact will be found to be longitudinal about 2.5 cm and everypiece of stone put into the road which exceeds 2.5 cm in any of its dimension is mischievous" was made by (A) Telford (B) Macadam (C) Tresguet (D) Sully

Description : The statement, regarding the size of stones used at the wearing surface. "The size of a stone used on a road must be in due proportion to the space occupied by a wheel of ordinary dimensions on a smooth ... dimension is mischievous" was made by (A) Telford (B) Macadam (C) Tresguet (D) Sully

Last Answer : Answer: Option B

The most useless aggregate is one whose surface texture is (A) Smooth (B) Granular (C) Glassy (D) Honey combed and porous

Description : The most useless aggregate is one whose surface texture is (A) Smooth (B) Granular (C) Glassy (D) Honey combed and porous

Last Answer : (C) Glassy

Pick up the correct statement from the following: (A) According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight (B) According to the shape of the particles, concrete aggregates are classified as rounded irregular, angular and flaky (C) According to the surface texture of the particles, the concrete aggregates are classified as glassy, smooth, granular, rough, crystalline, honey combed and porous (D) All the above

Description : Pick up the correct statement from the following: (A) According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight (B) According to ... glassy, smooth, granular, rough, crystalline, honey combed and porous (D) All the above

Last Answer : Answer: Option D

Bitumen paints offer (A) Pleasing surface (B) Hard surface (C) Smooth surface (D) Protective surface

Description : Bitumen paints offer (A) Pleasing surface (B) Hard surface (C) Smooth surface (D) Protective surface

Last Answer : Answer: Option D

Slate (A) Is a metamorphic rock (B) Splits into thin sheets along its bedding planes (C) Has a smooth surface and contains alumina and silica (D) Possesses good water absorption capacity

Description : Slate (A) Is a metamorphic rock (B) Splits into thin sheets along its bedding planes (C) Has a smooth surface and contains alumina and silica (D) Possesses good water absorption capacity

Last Answer : Answer: Option A

For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete (1 : 2 : 4) is laid on the base course and the surface is made smooth by trowelling (C) Glass strips are driven into the layer according to the pattern required (D) After final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material

Description : For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete ... final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material

Last Answer : Answer: Option B

The term dispersion describes the process of ∙ A. separating light into its component frequencies ∙ B. reflecting light from a smooth surface ∙ C. the process by which light is absorbed by an uneven rough surface ∙ D. light scattering

Description : The term dispersion describes the process of ∙ A. separating light into its component frequencies ∙ B. reflecting light from a smooth surface ∙ C. the process by which light is absorbed by an uneven rough surface ∙ D. light scattering

Last Answer : A. separating light into its component frequencies

The termdispersion describestheprocessof a.separatinglightinto its componentfrequencies b. reflecting light from a smooth surface c. the process by which light is absorbed by an uneven rough surface d. light scattering

Description : The termdispersion describestheprocessof a.separatinglightinto its componentfrequencies b. reflecting light from a smooth surface c. the process by which light is absorbed by an uneven rough surface d. light scattering

Last Answer : a.separatinglightinto its componentfrequencies

40 year old lady presented with swelling in the right side of the upper part of the neck below the ear lobule for last 10 years. Swelling is painless and gradually growing. On examination of the swelling, the surface is smooth, margins are well defined, and is free from skin and underlying structures. Histologically, architectural pleomorphism is seen. What is the most probable diagnosis Options: 1) Lipoma 2) Rhabdomyosarcoma 3) Chronic sialadenitis 4) Mixed parotid tumour

Description : 40 year old lady presented with swelling in the right side of the upper part of the neck below the ear lobule for last 10 years. Swelling is painless and gradually growing. On examination ... diagnosis Options: 1) Lipoma 2) Rhabdomyosarcoma 3) Chronic sialadenitis 4) Mixed parotid tumour

Last Answer : Correct Answer: 4) Mixed parotid tumour

When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Description : When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Last Answer : B. Remake a new crown

Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Description : Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Last Answer : B. To minimise the retention of plaque

.Fluoridation is the adjustment of the fluoride content of a community water supply to optimum levels for caries prevention. Which of the following statement is correct? A. Tooth decay declines by 90% to 95% B. Tooth decay declines by 45% to 55% C. Greater reduction in smooth surface caries from in pit and fissures D. Fluoridation increases vulnerability to osteoporosis

Description : .Fluoridation is the adjustment of the fluoride content of a community water supply to optimum levels for caries prevention. Which of the following statement is correct? A. Tooth decay ... in smooth surface caries from in pit and fissures D. Fluoridation increases vulnerability to osteoporosis

Last Answer : C. Greater reduction in smooth surface caries from in pit and fissures

The most accurate way to evaluate the effectiveness of root planning is by: A. Inspect the root surface with an instrument for root smoothness B. Use air for visual inspection C. Activate a curette against root surface and listen for a high pitched sound which indicates a smooth, hard surface. D. Evaluate the soft tissue at the end of the appointment for a decrease oedema and bleeding E. Evaluate the soft tissues 10 to 14 days later.

Description : The most accurate way to evaluate the effectiveness of root planning is by: A. Inspect the root surface with an instrument for root smoothness B. Use air for visual inspection C. Activate a ... the appointment for a decrease oedema and bleeding E. Evaluate the soft tissues 10 to 14 days later.

Last Answer : E. Evaluate the soft tissues 10 to 14 days later.