Name the mineral which is used to harden steel during manufacturing -SST 10th

Name the mineral which is used to harden steel during manufacturing -SST 10th
by

1 Answer

Answer :

Manganese is required to harden steel during manufacturing.
by

Related questions

The purpose of nitriding the steel is to (A) Harden its surface (B) Soften its surface (C) Improve its reliability (D) None of these

Description : The purpose of nitriding the steel is to (A) Harden its surface (B) Soften its surface (C) Improve its reliability (D) None of these

Last Answer : (A) Harden its surface

Roller chains are used for: a)Higher speed and higher loads b)made of high grade steel c)components are harden and polished d)All of the above

Description : Roller chains are used for: a)Higher speed and higher loads b)made of high grade steel c)components are harden and polished d)All of the above

Last Answer : d)All of the above

In what ways are some manufacturing industries dependent on mineral resources ? -SST 10th

Description : In what ways are some manufacturing industries dependent on mineral resources ? -SST 10th

Last Answer : Some manufacturing industries based on minerals resources transform raw materials into valuable industrial products. Iron and steel, cement, aluminium, petrochemical are mineral- based industry. They use raw meterials into finished products.

What are some signs that indicate you need to harden up?

Description : What are some signs that indicate you need to harden up?

Last Answer : I’m already hard.

Does chocolate ganache harden?

Description : Does chocolate ganache harden?

Last Answer : Yes, this is ganache. Ganache kind of hardens, but is still soft. I believe it is exactly what you are looking for. Truffles (the ones rolled in cocoa powder) are made from ganache. I hope that ... They are soft enough to melt against your skin or on your tongue, but hard enough to keep shape.

If i bruise alot, will it eventually harden and stop bruising?

Description : If i bruise alot, will it eventually harden and stop bruising?

Last Answer : I don’t know if that applies to bruises. I know it’s true for cuts, though.

How to tell if butternut squash is ripe and how to harden off and store?

Description : How to tell if butternut squash is ripe and how to harden off and store?

Last Answer : Need Answer

what use to harden my yard

Description : what use to harden my yard

Last Answer : Try adding clay to the areas that are most suspect to the water damage. -Birdy

Does ceramics harden without firing?

Description : If I make a ceramic statue and don't burn it because I don't have a kiln, will it harden too? Thank you

Last Answer : Yes dries and hardens. However, if it absorbs moisture or gets wet, it will soften again.

How to harden?

Description : I need to improve my immunity a little bit. How to do it? Should I alternate hot and cold showers? Or Only a cold shower?

Last Answer : Rather than milling yourself in the shower, I recommend the sauna. I will add: Of course, the sauna hardens ... Improving immunity is a question (even with Scottish sprays or showers) - but if I accept that "what doesn't kill you will make you stronger", then definitely yes. ;-)

What school did James harden go to?

Description : What school did James harden go to?

Last Answer : He went to artesia high in California

What school did James harden go to?

Description : What school did James harden go to?

Last Answer : He went to artesia high in California

Did James Harden die?

Description : Did James Harden die?

Last Answer : James Harden-Hickey died in 1898.

How good is James Harden?

Description : How good is James Harden?

Last Answer : Really Good.

Which of the problems listed will occur if a lead-acid battery is allowed to remain in a discharged condition for a long period of time? A. The battery may be unable to accept a full charge. B. The electrolyte will change to lead sulfate. C. The concentrated sulfuric acid will attack the lead peroxide plates. D. The separators will harden.

Description : Which of the problems listed will occur if a lead-acid battery is allowed to remain in a discharged condition for a long period of time? A. The battery may be unable to accept a full charge ... . C. The concentrated sulfuric acid will attack the lead peroxide plates. D. The separators will harden.

Last Answer : Answer: A

Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Description : Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter ... the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Last Answer : (A) Acrylic

The main purpose of galvanising iron sheets is to (A) Harden the surface (B) Increase its glossiness and lustre (C) Prevent the action of water (D) Prevent the action of oxygen

Description : The main purpose of galvanising iron sheets is to (A) Harden the surface (B) Increase its glossiness and lustre (C) Prevent the action of water (D) Prevent the action of oxygen

Last Answer : (C) Prevent the action of water

In temperate climates, pruning should not be done near the end of the summer because: a. New growth will not harden before winter b. It may increase foliage disease c. Plants will not recover in time to produce new growth before winter d. Sever “bleeding” from the cuts will kill the plant

Description : In temperate climates, pruning should not be done near the end of the summer because: a. New growth will not harden before winter b. It may increase foliage disease c. Plants will not recover in time to produce new growth before winter d. Sever “bleeding” from the cuts will kill the plant

Last Answer : New growth will not harden before winter

. Polymers which soften on heating and harden when cooled are (a) Cross-linked polymers (b) Copolymers (c) Thermosetting polymers (d) Thermoplastics

Description : Polymers which soften on heating and harden when cooled are (a) Cross-linked polymers (b) Copolymers (c) Thermosetting polymers (d) Thermoplastics

Last Answer : Thermoplastics

What is the purpose of plasticizers? (a) Harden plastics (b) Soften plastics (c) Initiate polymerizations (d) Cross-link polymer chains

Description : What is the purpose of plasticizers? (a) Harden plastics (b) Soften plastics (c) Initiate polymerizations (d) Cross-link polymer chains

Last Answer : Soften plastics

Cement concrete is __________________to moisture (a) Permeable (b) Impermeable (c) Rapid Harden (d) None of these

Description : Cement concrete is __________________to moisture (a) Permeable (b) Impermeable (c) Rapid Harden (d) None of these

Last Answer : (b) Impermeable

Mixed concrete cannot be shipped further than 25 miles because the concrete might harden in the truck. Antrim County Concrete Company is the only supplier of mixed concrete within a 30 mile radius. Antrim County Concrete Company is an example of which of the following competitive structures: A)Monopoly B)Oligopoly C)Monopolistic Competition D)Perfect Competition E)Monopsony

Description : Mixed concrete cannot be shipped further than 25 miles because the concrete might harden in the truck. Antrim County Concrete Company is the only supplier of mixed concrete within a 30 ... structures: A)Monopoly B)Oligopoly C)Monopolistic Competition D)Perfect Competition E)Monopsony

Last Answer : A)Monopoly

Which are other manufacturing industries, which depend on Iron and Steel industry? -SST 10th

Description : Which are other manufacturing industries, which depend on Iron and Steel industry? -SST 10th

Last Answer : Other manufacturing industries, e.g., machine tools, railway rolling stock like locomotives, coaches and ship-building indirectly depend on it.

Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) Solders generally melt at less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product

Description : Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) ... less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product

Last Answer : Option B

The process of manufacturing steel by heating short lengths of wrought iron bars mixed with charcoal in fire clay crucibles and collecting the molten iron into moulds, is known as (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Description : The process of manufacturing steel by heating short lengths of wrought iron bars mixed with charcoal in fire clay crucibles and collecting the molten iron into moulds, is known as (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option B

The process of decarbonising the pig iron completely and then adding proper percentage of carbon for manufacturing steel, is called (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Description : The process of decarbonising the pig iron completely and then adding proper percentage of carbon for manufacturing steel, is called (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option A

Which of the manufacturing processes is/are required to make a typical stainless steel spoon out of sheet metal? A. Casting B. Forming C. Brazing D. Blow moulding

Description : Which of the manufacturing processes is/are required to make a typical stainless steel spoon out of sheet metal? A. Casting B. Forming C. Brazing D. Blow moulding

Last Answer : Forming

What mineral is used in both steel and toothpaste and drinking water?

Description : What mineral is used in both steel and toothpaste and drinking water?

Last Answer : what mineral can be used in drinking water and toothpaste andsteel

The commodity which accounts for the maximum volume of goods transported by the railways in India is (a) iron and steel (b) coal (c) mineral oil (d) metallic ores (other than iron ore)

Description : The commodity which accounts for the maximum volume of goods transported by the railways in India is (a) iron and steel (b) coal (c) mineral oil (d) metallic ores (other than iron ore)

Last Answer : Ans: (b)

Crushing of mineral particles is accomplished in a 'cage mill', when one or more alloy steel bars are revolved in opposite directions. It is a type of __________ mill. (A) Impact (B) Roll (C) Vibratory (D) None of these

Description : Crushing of mineral particles is accomplished in a 'cage mill', when one or more alloy steel bars are revolved in opposite directions. It is a type of __________ mill. (A) Impact (B) Roll (C) Vibratory (D) None of these

Last Answer : (A) Impact

The final acid obtained during the manufacturing of `H_(2)SO_(4)` by contact process is

Description : The final acid obtained during the manufacturing of `H_(2)SO_(4)` by contact process is

Last Answer : The final acid obtained during the manufacturing of `H_(2)SO_(4)` by contact process is A. `H_(2)SO_(4)` (conc.) ... (dil) C. HCl D. `H_(2)S_(2)O_(7)`

What statement best describes textile manufacturing in Great Britain during the Industrial Revolution?

Description : What statement best describes textile manufacturing in Great Britain during the Industrial Revolution?

Last Answer : It became much more efficient due to a series of technological advances

Loss due to the diffraction of light when it strikes on the irregularities formed during the manufacturing process of the fiber optics. A. Absorption loss B. Attenuation C. Bending loss D. Rayleigh scattering loss

Description : Loss due to the diffraction of light when it strikes on the irregularities formed during the manufacturing process of the fiber optics. A. Absorption loss B. Attenuation C. Bending loss D. Rayleigh scattering loss

Last Answer : D. Rayleigh scattering loss

Which of the following is not a consideration in the development of audit programs? a. Internal control over the recording of plant asset additions and repairs and maintenance expenditures is found to be weak. b. The members of the board of directors are elected by the stockholders during the annual meeting. c. The client is a private university located in Southern Philippines. d. The client constructed a major addition to its central manufacturing facility during the year under audit

Description : Which of the following is not a consideration in the development of audit programs? a. Internal control over the recording of plant asset additions and repairs and maintenance expenditures is ... client constructed a major addition to its central manufacturing facility during the year under audit

Last Answer : The members of the board of directors are elected by the stockholders during the annual meeting.

A layout is an arrangement arrangement based on the sequence sequence of operations operations that are performed performed during the manufacturing of a good or the delivery of a service. a. Group b. Process c. Product d. Fixed position

Description : A layout is an arrangement arrangement based on the sequence sequence of operations operations that are performed performed during the manufacturing of a good or the delivery of a service. a. Group b. Process c. Product d. Fixed position

Last Answer : b. Process

Depletion region of a junction is formed _________ (a) during the manufacturing process (b) under forward bias (c) under reverse bias (d) when temperature varies

Description : Depletion region of a junction is formed _________ (a) during the manufacturing process (b) under forward bias (c) under reverse bias (d) when temperature varies

Last Answer : (a) during the manufacturing process

For rolling mark 60 kg/Sail/X/2010 the first testing in the field after initial testing of rails in rail manufacturing plant, will be done. (i) After test free period of 25%. (ii) After passage of every 40 GMT traffic during test free period.* (iii) After passage of 200 GMT. (iv) On the basis of annual GMT of the section.

Description : For rolling mark 60 kg/Sail/X/2010 the first testing in the field after initial testing of rails in rail manufacturing plant, will be done. (i) After test free period of 25%. (ii) After passage of every 40 ... period.* (iii) After passage of 200 GMT. (iv) On the basis of annual GMT of the section.

Last Answer : (ii) After passage of every 40 GMT traffic during test free period.*

The degree to which the design specifications are followed during manufacturing is known as a) Quality of design b) Quality of conformance c) Quality of testing d) None of the mentioned

Description : The degree to which the design specifications are followed during manufacturing is known as a) Quality of design b) Quality of conformance c) Quality of testing d) None of the mentioned

Last Answer : Ans: b