Crushing of mineral particles is accomplished in a 'cage mill', when one or more alloy steel bars are revolved in opposite directions. It is a type of __________ mill. (A) Impact (B) Roll (C) Vibratory (D) None of these

Crushing of mineral particles is accomplished in a 'cage mill', when one
or more alloy steel bars are revolved in opposite directions. It is a type of
__________ mill.
(A) Impact
(B) Roll
(C) Vibratory
(D) None of these
by

1 Answer

Answer :

(A) Impact
by

Related questions

Fibrous material is broken by a (A) Roll-crusher (B) Squirrel-cage disintegrator (C) Ball mill (D) Tube mill

Description : Fibrous material is broken by a (A) Roll-crusher (B) Squirrel-cage disintegrator (C) Ball mill (D) Tube mill

Last Answer : (B) Squirrel-cage disintegrator

In case of a hammer crusher, (A) Crushing takes place by impact breaking (B) Maximum acceptable feed size is 30 cms (C) Reduction ratio can be varied by adjusting the distance from cage to hammers (D) All (A), (B) and (C)

Description : In case of a hammer crusher, (A) Crushing takes place by impact breaking (B) Maximum acceptable feed size is 30 cms (C) Reduction ratio can be varied by adjusting the distance from cage to hammers (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement: (A) Magnetic separation method can be employed to treat both dry & wet ores (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed size to the maximum product size (C) Gyratory crusher is used for coarse crushing (D) Screens are of stationary, moving and vibratory types

Description : Pick out the wrong statement: (A) Magnetic separation method can be employed to treat both dry & wet ores (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed ... ) Gyratory crusher is used for coarse crushing (D) Screens are of stationary, moving and vibratory types

Last Answer : (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed size to the maximum product size

Pick out the wrong statement. (A) Gape is the greatest distance between the crushing surfaces or the jaws (B) The angle of nip (2α) is the angle between roll faces at the level where they will just take hold of a particle and draw it in the crushing zone (C) Crushing efficiency is the ratio of the energy absorbed by the solid to the surfaces energy created by crushing (D) Reduction ratio is the ratio of the maximum size of the particles in the feed to that in the product

Description : Pick out the wrong statement. (A) Gape is the greatest distance between the crushing surfaces or the jaws (B) The angle of nip (2α) is the angle between roll faces at the level where they will ... Reduction ratio is the ratio of the maximum size of the particles in the feed to that in the product

Last Answer : (C) Crushing efficiency is the ratio of the energy absorbed by the solid to the surfaces energy created by crushing

Half the angle of nip, (α), for a roll crusher is given by (where, dr, dp and df are diameters of crushing rolls, feed particles and rolls gap respectively). (A) cos α = (dr + dp)/(dr + df) (B) cos α = (dr + df)/(dr + dp) (C) tan α = (dr + dp)/(dr + df) (D) sin α = (dr + dp)/(dr + df)

Description : Half the angle of nip, (α), for a roll crusher is given by (where, dr, dp and df are diameters of crushing rolls, feed particles and rolls gap respectively). (A) cos α = (dr + dp)/(dr + df) (B) cos α = (dr + df)/(dr + dp) (C) tan α = (dr + dp)/(dr + df) (D) sin α = (dr + dp)/(dr + df)

Last Answer : (A) cos α = (dr + dp)/(dr + df)

Gravity stamp mill is meant for the __________ crushing. (A) Primary (B) Intermediate (C) Fine (D) Ultrafine

Description : Gravity stamp mill is meant for the __________ crushing. (A) Primary (B) Intermediate (C) Fine (D) Ultrafine

Last Answer : (C) Fine

In a three-phase, squirrel-cage type, induction motor the rotating magnetic field is established by the _____________. A. current induced in the rotor windings B. application of a three-phase voltage supply to the stator windings C. laminated steel core and aluminum conductors in the rotor D. interaction of the magnetic field caused by the induced current in the squirrel-cage bars with the magnetic field of the stator

Description : In a three-phase, squirrel-cage type, induction motor the rotating magnetic field is established by the _____________. A. current induced in the rotor windings B. application of a three-phase voltage ... caused by the induced current in the squirrel-cage bars with the magnetic field of the stator

Last Answer : Answer: B

Liners of a ball mill are never made of (A) Lead (B) Alloy steel (C) Rubber or ceramic material (D) Cast iron

Description : Liners of a ball mill are never made of (A) Lead (B) Alloy steel (C) Rubber or ceramic material (D) Cast iron

Last Answer : (A) Lead

Size reduction of __________ is accomplished in steam heated rollers and roll crushers. (A) Resins (B) Gums (C) Hard rubber (D) Waxes

Description : Size reduction of __________ is accomplished in steam heated rollers and roll crushers. (A) Resins (B) Gums (C) Hard rubber (D) Waxes

Last Answer : (C) Hard rubber

Size reduction of ice and gypsum can be accomplished suitably by a __________ crusher. (A) Blake jaw (B) Toothed roll (C) Gyratory (D) None of these

Description : Size reduction of ice and gypsum can be accomplished suitably by a __________ crusher. (A) Blake jaw (B) Toothed roll (C) Gyratory (D) None of these

Last Answer : (B) Toothed roll

The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

__________ mill is not a revolving mill. (A) Pebble (B) Compartment (C) Cage (D) Tube

Description : __________ mill is not a revolving mill. (A) Pebble (B) Compartment (C) Cage (D) Tube

Last Answer : (C) Cage

3. __________ mill is normally used for grinding of talc. (A) Tube (B) Compartment (C) Ring-roll (D) Pebble

Description : 3. __________ mill is normally used for grinding of talc. (A) Tube (B) Compartment (C) Ring-roll (D) Pebble

Last Answer : (A) Tube

The system in which high tensile alloy steel bars (silica manganese steel) are used as prestressing tendons, is known as (A) Freyssinet system (B) Magnel-Blaton system (C) C.C.L. standard system (D) Lee-McCall system

Description : The system in which high tensile alloy steel bars (silica manganese steel) are used as prestressing tendons, is known as (A) Freyssinet system (B) Magnel-Blaton system (C) C.C.L. standard system (D) Lee-McCall system

Last Answer : Answer: Option D

For grinding of cereals, grains, spices, pigments, saw dust, cork etc., the most extensively used size reduction equipment is a(A) Buhrstone mill(B) Ball mill(C) Crushing rolls(D) Hammer mill

Description : For grinding of cereals, grains, spices, pigments, saw dust, cork etc., the most extensively used size reduction equipment is a (A) Buhrstone mill (B) Ball mill (C) Crushing rolls (D) Hammer mill

Last Answer : (A) Buhrstone mill

Ball mill is used for (A) Crushing (B) Coarse grinding (C) Fine grinding (D) Attrition

Description : Ball mill is used for (A) Crushing (B) Coarse grinding (C) Fine grinding (D) Attrition

Last Answer : (C) Fine grinding

A fluid energy mill is used for (A) Cutting (B) Grinding (C) Ultra-grinding (D) Crushing

Description : A fluid energy mill is used for (A) Cutting (B) Grinding (C) Ultra-grinding (D) Crushing

Last Answer : (C) Ultra-grinding

A fluid energy mill is used for (A) Cutting (B) Grinding (C) Ultra grinding (D) Crushing

Description : A fluid energy mill is used for (A) Cutting (B) Grinding (C) Ultra grinding (D) Crushing

Last Answer : (C) Ultra grinding

Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not exceed 4 (C) Both the rolls run necessarily at the same speed (D) Reduction ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Description : Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not ... ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Last Answer : (C) Both the rolls run necessarily at the same speed

Which of the following is used for primary crushing of very hard lumpy materials? (A) Toothed roll crusher (B) Gyratory crusher

Description : Which of the following is used for primary crushing of very hard lumpy materials? (A) Toothed roll crusher (B) Gyratory crusher

Last Answer : (B) Gyratory crusher

__________ forces do not act in case of fluid flow. (A) Elastic (B) Tensile (C) Vibratory (D) Centrifuga

Description : __________ forces do not act in case of fluid flow. (A) Elastic (B) Tensile (C) Vibratory (D) Centrifuga

Last Answer : (B) Tensile

For the preliminary breaking of hard rock, we use a (A) Gyratory crusher(B) Ball mill(C) Tube mill(D) Squirrel-cage disintegrator

Description : For the preliminary breaking of hard rock, we use a (A) Gyratory crusher (B) Ball mill (C) Tube mill (D) Squirrel-cage disintegrator

Last Answer : (A) Gyratory crusher

Size reduction of fibrous materials like wood, asbestos, mica etc. is done by a disintegrator exemplified by the(A) Blake jaw crusher(B) Cage mill(C) Stamp mill(D) Bradford's breaker

Description : Size reduction of fibrous materials like wood, asbestos, mica etc. is done by a disintegrator exemplified by the (A) Blake jaw crusher (B) Cage mill (C) Stamp mill (D) Bradford's breaker

Last Answer : (B) Cage mill

Which of the following is not a revolving/tumbling mill used for size reduction? (A) Compartment mill (B) Pebble mill (C) Cage mill (D) Rod mill

Description : Which of the following is not a revolving/tumbling mill used for size reduction? (A) Compartment mill (B) Pebble mill (C) Cage mill (D) Rod mill

Last Answer : (C) Cage mill

Austenitic manganese steel used for making jaws of crushing machines contains about __________ percent manganese. (A) 1.5-2 (B) 3.5-4.5 (C) 7-9 (D) 12-14

Description : Austenitic manganese steel used for making jaws of crushing machines contains about __________ percent manganese. (A) 1.5-2 (B) 3.5-4.5 (C) 7-9 (D) 12-14

Last Answer : (D) 12-14

Maximum size reduction in a ball mill is done by the, __________ action. (A) Attrition (B) Compression (C) Impact (D) Cutting

Description : Maximum size reduction in a ball mill is done by the, __________ action. (A) Attrition (B) Compression (C) Impact (D) Cutting

Last Answer : (C) Impact

The delivery of goods by one person to another for some purpose, upon a contract and that they shall, when the purpose is accomplished, be returned or otherwise disposed of by accounting to the directions of the person delivering them, then it is called: A. Contingent contract B. Bailment C. Pledge D. Contract of indemnity

Description : The delivery of goods by one person to another for some purpose, upon a contract and that they shall, when the purpose is accomplished, be returned or otherwise disposed of by accounting to the ... then it is called: A. Contingent contract B. Bailment C. Pledge D. Contract of indemnity

Last Answer : B. Bailment

Which of the following is not an ultrafine grinder (colloid mill)?(A) Micronizers (B) Agitated mills and fluid energy mills (C) Toothed roll crusher (D) Hammer mills with internal classification

Description : Which of the following is not an ultrafine grinder (colloid mill)? (A) Micronizers (B) Agitated mills and fluid energy mills (C) Toothed roll crusher (D) Hammer mills with internal classification

Last Answer : (C) Toothed roll crusher

Limestone is normally crushed in a (A) Roll crusher (B) Hammer crusher (C) Ball mill (D) Tube mill

Description : Limestone is normally crushed in a (A) Roll crusher (B) Hammer crusher (C) Ball mill (D) Tube mill

Last Answer : (B) Hammer crusher

Coal is finally pulverised to 200 mesh size for burning in boilers by a (A) Hammer crusher(B) Ball mill(C) Roll crusher(D) Gyratory crusher

Description : Coal is finally pulverised to 200 mesh size for burning in boilers by a (A) Hammer crusher (B) Ball mill (C) Roll crusher (D) Gyratory crusher

Last Answer : (B) Ball mill

Which of the following is a coarse crusher? (A) Smooth roll crusher (B) Toothed roll crusher (C) Gyratory crusher (D) Tube mill

Description : Which of the following is a coarse crusher? (A) Smooth roll crusher (B) Toothed roll crusher (C) Gyratory crusher (D) Tube mill

Last Answer : (C) Gyratory crusher

Cement clinker is reduced to fine size by a (A) Roll crusher (B) Ball mill (C) Tube mill (D) Hammer mill

Description : Cement clinker is reduced to fine size by a (A) Roll crusher (B) Ball mill (C) Tube mill (D) Hammer mill

Last Answer : (C) Tube mill

Carbon black is pulverised in a (A) Hammer crusher (B) Ball mill (C) Roll crusher (D) Gyratory crusher

Description : Carbon black is pulverised in a (A) Hammer crusher (B) Ball mill (C) Roll crusher (D) Gyratory crusher

Last Answer : (B) Ball mill

This type thresher consists of corrugated bars are mounted axially on pheripheri of the cylinder. a. Hammer mill c. Dummy d. None of above

Description : This type thresher consists of corrugated bars are mounted axially on pheripheri of the cylinder. a. Hammer mill c. Dummy d. None of above

Last Answer : Ans-    b. Raspbar

Bond crushing law (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law (B) Is less realistic in estimating the power requirements of commercial crushers (C) States that the work required to form particle of any size from very large feed is proportional to the square root of the volume to surface ratio of the product (D) States that the work required for the crushing is proportional to the new surface created

Description : Bond crushing law (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law (B) Is less realistic in estimating the power requirements of commercial crushers ( ... (D) States that the work required for the crushing is proportional to the new surface created

Last Answer : (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law

Which of the following is not accomplished by agitation of liquids in agitators? (A) Dispersing gas in liquid (B) Blending of immiscible liquids (C) Dispersing immiscible liquid in form of emulsion (D) Suspending solid particles

Description : Which of the following is not accomplished by agitation of liquids in agitators? (A) Dispersing gas in liquid (B) Blending of immiscible liquids (C) Dispersing immiscible liquid in form of emulsion (D) Suspending solid particles

Last Answer : (B) Blending of immiscible liquids

Why has my guinea pig started chewing his cage bars?

Description : We've had our guinea pig for over 3 years. All of a sudden he started chewing on the bars of the cage. What's going on?

Last Answer : He could be bored. Let him out of his cage more, give him toys. Hope it helps!

Discoloration of the rotor bars in a squirrel-cage motor is typical evidence of _____________. A. moisture B. overheating C. vibration D. all of the above

Description : Discoloration of the rotor bars in a squirrel-cage motor is typical evidence of _____________. A. moisture B. overheating C. vibration D. all of the above

Last Answer : Answer: B

A split-phase induction squirrel-cage motor will not come up to speed, even though the rated voltage, rated frequency, and rated load are applied. The suspected trouble could be due to _____________. A. a faulty centrifugal switch B. broken rotor bars C. worn bearings D. all of the above

Description : A split-phase induction squirrel-cage motor will not come up to speed, even though the rated voltage, rated frequency, and rated load are applied. The suspected trouble could be due to _____________. A. a faulty centrifugal switch B. broken rotor bars C. worn bearings D. all of the above

Last Answer : Answer: D

The speed of a squirrel-cage induction motor is determined by the ____________. A. diameter of the stator B. number of stator poles C. rotor winding resistance D. rotor conducting bars resistance

Description : The speed of a squirrel-cage induction motor is determined by the ____________. A. diameter of the stator B. number of stator poles C. rotor winding resistance D. rotor conducting bars resistance

Last Answer : Answer: B

The line, ―His strength behind the bars‖ suggests – (a) The tiger is tied to the back of the cage . (b) The tiger has lost its strength and courage. (c) The tiger is cowardly and foolish. (d) The tiger is incapable of doing anything in the cage.

Description : The line, ―His strength behind the bars‖ suggests – (a) The tiger is tied to the back of the cage . (b) The tiger has lost its strength and courage. (c) The tiger is cowardly and foolish. (d) The tiger is incapable of doing anything in the cage.

Last Answer : (d) The tiger is incapable of doing anything in the cage.

Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of materials (C) Size enlargement (opposite of size reduction) is not a mechanical operation (D) A 'dust catcher' is simply an enlargement in a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Description : Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of ... a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Last Answer : (C) Size enlargement (opposite of size reduction) is not a mechanical operation

A steel alloy containing 36% nickel is called __________, which has a zero co-efficient of expansion. (A) Austenitic stainless steel (B) Heat resisting steel (C) Invar (D) High speed steel

Description : A steel alloy containing 36% nickel is called __________, which has a zero co-efficient of expansion. (A) Austenitic stainless steel (B) Heat resisting steel (C) Invar (D) High speed steel

Last Answer : (C) Invar

Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy

Description : Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy

Last Answer : (A) Low carbon

Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy

Description : Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy

Last Answer : (A) Low carbon

Highest cutting speed is achieved by the __________ tool material. (A) High speed steel (B) Carbide (C) Cast alloy (D) Plain carbon steel

Description : Highest cutting speed is achieved by the __________ tool material. (A) High speed steel (B) Carbide (C) Cast alloy (D) Plain carbon steel

Last Answer : (B) Carbide

Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Description : Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Last Answer : (D) Plain carbon

__________ of hard alloy and tool steel is done to make it easily machinable. (A) Case carburising (B) Tempering (C) Normalising (D) Annealing

Description : __________ of hard alloy and tool steel is done to make it easily machinable. (A) Case carburising (B) Tempering (C) Normalising (D) Annealing

Last Answer : (B) Tempering