Description : Crank speed on the mower with dynamically balanced systems a)850-1000rpm. b)1000-1200rpm c)850-1150rpm. d)1200-1600rpm
Last Answer : b)1000-1200rpm
Description : Speed of the cutter bar in case of combine (grain) is (a)400-550 rpm (b) 500-800rpm (c)800-1000rpm (d) 1000-1200rpm
Last Answer : a)400-550 rpm
Description : The cutter bar of a tractor operated mower ordinarily makes: A. 800-1200 strokes/min B. 1600-2000 strokes/min C. 2400-2800 strokes/min D. 3200-3600 strokes/min
Last Answer : A. 800-1200 strokes/min
Description : Optimum operating cylinder speed for the power operated maize sheller is a) 200-400rpm b) 400-600rpm c) 600-800rpm d) 1000-1200rpm
Last Answer : c) 600-800rpm
Description : Speed of the cutter bar in case of combine (grain) is :- a) 400 – 550 rpm b) 500 – 800 rpm C) 800 - 1000 rpm d) 1000 – 1200 rpm
Last Answer : a) 400 – 550 rpm
Description : Optimum speed for grains like gram,pea,etc.,thresher using power is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm
Last Answer : a) 300-400rpm
Description : Optimum operating cylinder speed for wheat threshing using power operated thresher is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm
Last Answer : d) 1100-1200rpm
Description : 267 .Double knives movers offers advantage over conventional mower are a)Double knife are dynamically balanced b) They can be operated at higher forward speeds then conventional mower c)They produce more uniform stubble height d)All of the above
Last Answer : d)All of the above
Description : Speed of power operated machine chaff cutter is E. 35 rpm F. 50 rpm G. 600-1000 rpm H. None of the above
Last Answer : G. 600-1000 rpm
Description : Speed of band operated machines chaff cutter having two knives F. 35 rpm G. 50 rpm H. 600 rpm I. 1000 rpm
Last Answer : F. 35 rpm
Description : peed of a high speed engine is (a) 1000rpm (d) none of the above
Last Answer : (c) >1000rpm
Description : peed of a medium speed engine is (a) 1000rpm (d) none of the above
Last Answer : (b) 350-1000 rpm
Description : Speed of a low speed engine is (a) 1000rpm (d) none of the above
Last Answer : (a)
Description : A traction fitted with diesel engine will have good slogging ability as lugging ability if it has a reserve of a.500 rpm d.200 rpm c.300 rpm e.1000 rpm
Last Answer : a.500 rpm
Description : The brain of human adult weighs about - (1) 1200 - 1300 gm (2) 1600 - 2000 gm (3) 500 - 800 gm (4) 104 - 200 gm
Last Answer : (1) 1200 - 1300 gm Explanation: The adult human brain weighs on average about 3 lbs. (1.5 kg) with a volume of around 1130 cubic centimetres (cm3) in women and 1260 cm3 in men, although ... same general structure as the brains of other mammals, but is larger than any other in relation to body size.
Description : The brain of human adult weighs about-----? A. 1200 – 1300 gm (Answer) B. 1600 – 2000 gm C. 500 – 800 gm D. 100 – 200 gm
Last Answer : A. 1200 – 1300 gm (Answer)
Description : The brain of human adult weighs about (1) 1200 – 1300 gm (2) 1600 – 2000 gm (3) 500 – 800 gm (4) 100 – 200 gm
Last Answer : 1200 – 1300 gm
Description : One cubit metre of cement weights [ A ] 1000 kg [ B ] 1200 kg [ C ] 1440 kg [ D ] 1600 kg
Last Answer : [ C ] 1440 kg
Description : A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the power consumed now will be __________ hp. (A) 0.5 (B) 2 (C) 4 (D) 1
Last Answer : (A) 0.5
Description : A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, then the new head will be __________ metres. (A) 2 (B) 4 (C) 8 (D) 5.5
Last Answer : (A) 2
Description : A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the new discharge will be __________ litres/minute. (A) 500 (B) 200 (C) 1000 (D) 750
Last Answer : (A) 500
Description : The cutter bar of a tractor operated mower ordinarily makes: A. Near the front axis B. 40mm towards the real axis C. At the power take off shaft D. Between the two lower Links
Last Answer : D. Between the two lower Links
Description : The implement which can work in offset position a)offset disc harrow b) mower c) both (a) and (b) d) none of the above
Last Answer : c) both (a) and (b)
Description : The purpose of registration in a mower is (A) to get uniform length of cut of grass (B)to run the mower at minimum power (C)to run the mower at uniform torque (D)to reduce the occurrence of overload
Last Answer : (B)to run the mower at minimum power
Description : A Tillage implement moving at a constant velocity is subjected to a) Force of gravity b) Soil force (resistance) c) Pull of mower d) All of the above
Last Answer : d) All of the above
Description : enght of cutter bar for the tractor operated mower or vertical conveyor reaper is..... (a) 1.5-3.0m (b) 3.0-4.5m (c)4.5-5.5m (d) >5.5m
Last Answer : (a) 1.5-3.0m
Description : power of absorbing type hydraulic dynamometer varies as a) cube of rpm b) fifth power of the diameter c) none of the above d) both (a) and (b)
Last Answer : d) both (a) and (b)
Description : Agitator(propeller or paddle)type for agitating liquid in power sprays have a velocity of a.100-120 rpm b.60-100 rpm c.10-20 rpm d. none of the above
Last Answer : a.100-120 rpm
Description : Formula for established plants to the speed sown based on the dug seed is given by A. CI= [(E×10000) /(D×W) ]×1000 B. CI=[E/(N+E) ]×100 C.Both (A) and (B) D. None of (A) and (B)
Last Answer : B. CI=[E/(N+E) ]×100
Description : The thermal radiative flux from a surface of emissivity = 0.4 is 22.68 kW/m2 . The approximate surface temperature (K) is (Stefan-Boltzmann constant = 5.67 × 10 -8 W/m2 .K4 ) (A) 1000 (B) 727 (C) 800 (D) 1200
Last Answer : (A) 1000
Description : Check supervisor in RMS the standard for test sorting will be a) 500 article per hour b) 800 article per hour c) 1000 article per hour d) 1200 article per hour
Last Answer : a) 500 article per hour
Description : Conversion of yellow phosphorous to red phosphorous is done by heating it in covered retorts at __________ °C in absence of air. (A) 50-80 (B) 250-400 (C) 1000-1200 (D) 800-900
Last Answer : (B) 250-400
Description : Production at 60% activity is Rs 600 units, if flexible budget needs to be calculated at 80% activity what will be units produced? a) Rs 800 b) Rs 600 c) Rs 1200 d) Rs 1000
Last Answer : a) Rs 800
Description : For protection of level crossing gate in an emergency on BG double line the Gateman should place one detonator at one place and 3 detonators at a subsequent place at a distance of ------- a) and------ ... c) 500 meters and 1000 meters d) 600 meters and 1200 meters* e) 800 meters in 1500 meters
Last Answer : d) 600 meters and 1200 meters*
Description : Indication post for detonator should be provided at a distance of ---------meter and --------- meter for BG level crossing a) 400 meters in 800 meters b) 500 meters and 1200 meters c) 600 meters and 1200 meter * d)600 meters and 1000 meters
Last Answer : c) 600 meters and 1200 meter *
Description : Hook link chains are a)suitable for external drive exposed atmosphere b)made of meabble iron c)used where power requirement is low and speed is low d)All of the above
Description : V-belt drive transmission system is used when it is designed to achieve a) High speed ratio b) Space requirements are limited c) Both (a) and (b) d) None of the above
Last Answer : c) Both (a) and (b)
Description : A 3-phase 50HZ SCIM takes a power input of 30 KW at its full load speed of 1440 rpm. Total stator losses are 1 KW. The slip and rotor ohmic losses at full load are a) 0.02, 600 W b) 0.04, 580 W c) 0.04, 1160 W d) 0.04, 1200 W
Last Answer : Ans: 0.04, 1160 W
Description : The synchronous speed for a 3 phase 6-pole induction motor is 1200 rpm. If the number of poles is now reduced to 4 with the frequency remaining constant, the rotor speed with a slip of 5% will be _________. (A) 1690 rpm (B) 1750 rpm (C) 1500 rpm (D) 1710 rpm
Last Answer : (D) 1710 rpm
Description : Shweta deposits a certain amount on 1st January and 1st July (Same amount on both days) in a bank that offers 5% compound interest, compounded half-yearly. Shweta gains interest of Rs.121 at the end of the year. How much money did Shweta deposit? a) 1200 b) 1300 c) 1400 d) 1500 e) 1600
Last Answer : Let the amount be P Half yearly rate = 5/2 = 2.5% For the deposit on January, Amount = P (1 + 2.5 / 100)2 For the deposit on July, Amount = P (1 + 2.5 /100) We can solve the question by ... Amount in July = 1600 1.025 = 1640 So total interest = 81 + 40 = 121 Required answer is 1600 Answer: e)
Description : A four-pole induction motor, operating on three-phase 60 cycle current will operate at approximately ___________. A. 850 RPM B. 1,150 RPM C. 1,750 RPM D. 3,550 RPM
Last Answer : Answer: C
Description : Calculate the bearing life if expected life for 90% bearings is 9000 hr and the shaft is rotating at 1500 rpm. (a) 850 million rev (b) 810 million rev (c) 810 hr (d) 850 hr
Last Answer : (b) 810 million rev
Description : An industry employed 1200 men and 800 women and the average salary was Rs 51 per day. If a woman got Rs 10 less than a man , then what are their daily salary?(mens and women respectively) A) men Rs 25 and women Rs ... Rs 45 and women Rs 55 C) men Rs 35 and women Rs 25 D) men Rs 55 and women Rs 45
Last Answer : D) Let the daily salary of man be Rs’x’ Then the daily salary of a women = Rs (x-100 Now 1200x + 800(x-10) = 51 *(1200+800) 1200x+800x -8000 = 51*2000 2000x = 102000+8000 =110000 X=55 Therefore mens daily salary Rs 55 and womens daily salary Rs 45
Description : The amount of liquid required for spraying of plantation crops is : a.) 200-400L/ha b.) 400-600L/ha c.) 600-800L/ha d.) 1000-1200L/ha
Last Answer : d.) 1000-1200L/ha
Description : he amount of liquid required for ground spraying of agricultural crops is : a.) 400-600L/ha b.) 200-400L/ha c.) 1000-2000L/ha d.) 600-800L/ha
Last Answer : a.) 400-600L/ha
Description : The formula for tension difference or effective pull, required to transmit the load at.... (a) (Tt-Ts)=1000(kw/V) (b) Tt/Ts=c^ke (c) (Tt-Ts)= 1000(Hp/V) (d) None of the above
Last Answer : (a) (Tt-Ts)=1000(kw/V)
Description : .308- Life expectancy of V-belt in farm machinery is about.... (a) 200-500 hrs (b) 1000-2000 hrs (c) 2000-5000hrs (d) 5000-10000hrs
Last Answer : (b) 1000-2000 hrs
Description : A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2
Last Answer : c. 502 rad/min2
Description : A dc shunt generator has a speed of 800 rpm when delivering 20 A to the load at the terminal voltage of 220V. If the same machine is run as a motor it takes a line current of 20A from 220V supply. The speed of ... . (B) more than 800 rpm. (C) less than 800 rpm. (D) both higher or lower than 800 rpm.
Last Answer : (C) less than 800 rpm.
Description : Capital employed is Rs.50,000 Trading Profit amounted Rs.12,200, Rs.15,000 and Rs.2000 loss for 2016, 2017 and 2018 respectively. Rate of interest is 8% and the rate of risk is 2% Remuneration from alternative employment of the ... A Rs.8,000 B Rs.8,800 C Rs.8,850 D Rs.9,500 ANS: Rs.8,850
Last Answer : A