Description : A traction fitted with diesel engine will have good slogging ability as lugging ability if it has a reserve of a.500 rpm d.200 rpm c.300 rpm e.1000 rpm
Last Answer : a.500 rpm
Description : hen displacement volume is divided by piston displacement, what will we obtained (a) number of cylinders (b) number of power stroke per minute for all cylinders (c) number of revolution of the crankshaft (engine) (d) number of revolution of crankshaft × number of cylinder
Last Answer : (b) number of power stroke per minute for all cylinders
Description : In a combine harvester the peripheral speed of the cylinder ranges between ________ m/min.
Last Answer : 1200 to 1500
Description : The average working speed of a hand operated chaff fitted with two knives is _________ rev/min.
Last Answer : 35
Description : Number of piston rings on piston varies between A. 1-3 B. 3-7 C. 7 D. 12 E. >12
Last Answer : B. 3-7
Description : The water produced during metabolic reactions in an adult is about (A) 100 ml/day (B) 300 ml/day (C) 500 ml/day (D) 700 ml/day
Last Answer : Answer : B
Description : In glycoproteins the carbohydrate is in the form of disaccharide units, the number of units are (A) 50–100 (B) 200–300 (C) 400–500 (D) 600–700
Last Answer : Answer : D
Description : Recommended capacity of the seed box or hopper for tractor mounted (large size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit
Last Answer : d. 200-300 lit
Description : Recommended capacity of the seed box or hopper for tractor mounted(small size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit
Last Answer : c. 100-150 lit
Description : Recommended capacity of the seed box or hopper for animal drawn is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit
Last Answer : b. 10-60 lit
Description : Recommended capacity of the seed box or hopper for manually operated seeder is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit
Last Answer : a. 2-10 lit
Description : Optimum speed for grains like gram,pea,etc.,thresher using power is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm
Last Answer : a) 300-400rpm
Description : Optimum operating cylinder speed for wheat threshing using power operated thresher is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm
Last Answer : d) 1100-1200rpm
Description : Main function of cutout relay in electrical circuit is A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces. B. To restrict the maximum output at ... deliver current to the battery or to the lightening and ignition circuit. D. None of the above
Last Answer : A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces.
Description : High speed diesel A) is used on high speed engine B) has lower fule value then l.s.d per litre. C)both (a) & (b) D)none of the above
Last Answer : C)both (a) & (b)
Description : peed of a high speed engine is (a) 1000rpm (d) none of the above
Last Answer : (c) >1000rpm
Description : Diameter of pully should be such that it gives the best speed of ........meter/minute at full throtlle: A)500 b)950 C)1500 d)2000
Last Answer : b)950
Description : Speed of the cutter bar in case of combine (grain) is (a)400-550 rpm (b) 500-800rpm (c)800-1000rpm (d) 1000-1200rpm
Last Answer : a)400-550 rpm
Description : An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min
Last Answer : a. 500 ft/min
Description : The cutter bar of a tractor operated mower ordinarily makes: A. 800-1200 strokes/min B. 1600-2000 strokes/min C. 2400-2800 strokes/min D. 3200-3600 strokes/min
Last Answer : A. 800-1200 strokes/min
Description : Injection pressure of fuel nozzle in diesel engine is a) 30-45 kg/cm2 b) 50-100 kg/cm2 c) 120-200 kg/cm2 d) 200 kg/cm2
Last Answer : c) 120-200 kg/cm2
Description : Rated speed of an engine is the speed at which an engine devlopes (A) Maximum crankshaft torque (B) Maximum brake horse power output (C) Maximum thermal efficiency (D) Maximum drawback pull
Last Answer : (B) Maximum brake horse power output
Description : Engine power output is a function of A. Crank shaft torque B. Speed C. Both (A) and (B) D. None of the above
Last Answer : Engine power output is a function of A. Crank shaft torque B. Speed C. Both (A) and (B) D. None of the above
Description : iesel engine has less reserve torque then spark ignition because ∙ Torque-speed curve is governed by volumetric efficiency of fuel pump and engine cylinder ∙ Torque is a function of thermal efficiency ∙ Diesel engine has generally low speed engine ∙ None of the above
Last Answer : ∙ Torque is a function of thermal efficiency
Description : onstant speed governors are used on ∙ Tractor engine diesel ∙ Stationary diesel engine ∙ Petrol engine ∙ None of the above
Last Answer : Stationary diesel engine
Description : variable speed governors are used on ∙ Tractor engine(diesel) ∙ Stationary engine (diesel) ∙ Petrol engine ∙ None of the above
Last Answer : ∙ Tractor engine(diesel)
Description : peed of a medium speed engine is (a) 1000rpm (d) none of the above
Last Answer : (b) 350-1000 rpm
Description : Speed of a low speed engine is (a) 1000rpm (d) none of the above
Last Answer : (a)
Description : Formula for established plants to the speed sown based on the dug seed is given by A. CI= [(E×10000) /(D×W) ]×1000 B. CI=[E/(N+E) ]×100 C.Both (A) and (B) D. None of (A) and (B)
Last Answer : B. CI=[E/(N+E) ]×100
Description : Normal quantity of urobilinogen excreted in the feces per day is about (A) 10–25 mg (B) 50–250 mg (C) 300–500 mg (D) 700–800 mg FATS AND FATTY ACID METABOLISM 79
Description : During pregnancy, the following should be added to the calculated energy requirement: (A) 300 kcal/day (B) 500 kcal/day (C) 700 kcal/day (D) 900 kcal/day
Last Answer : Answer : A
Description : The round-trip propagation delay between two earth stations through a geosynchronous satellite is A. 500 to 600 ms B. 300 to 400 ms C. 600 to 700 ms D. 400 to 500 ms
Last Answer : A. 500 to 600 ms
Description : Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)? a. 200 hPa b. 700 hPa c. 500 hPa d. 300 hPa
Last Answer : d. 300 hPa
Description : During a period 17, 500 labour hours were worked at a standard cost of Rs 6.50 per hour. The labour efficiency variance was Rs 7,800 favourable. How many standard hours were produced? (a) 1,200 (b) 16,300 (c) 17,500 (d) 18,700
Last Answer : (d) 18,700
Description : At standard pressure and temperature the average speed of molecules is A. 400 m s-1 B. 500 m s-1 C. 600 m s-1 D. 700 m s-1
Last Answer : 400 m s-1
Description : Cylinder loss in a stationary power thresher can be reduced by increasing the : M. Cylinder peCylinder loss in a stationary power thresher can be reduced by increasing the : M. Cylinder peripheral speed N. Concave clearance O. Blower speed P. All of the above
Last Answer : M. Cylinder peripheral speed
Description : Cutting speed of the impact type cutter is a)10-20 m/s. b)20-40m/s c)40-50m/s. d)46-56m/s
Last Answer : b)20-40m/s
Description : .308- Life expectancy of V-belt in farm machinery is about.... (a) 200-500 hrs (b) 1000-2000 hrs (c) 2000-5000hrs (d) 5000-10000hrs
Last Answer : (b) 1000-2000 hrs
Description : Superchargers are driven by A. Electric current from the battery B. Exhaust gases from engine C. Direct connection with the engine power D. None of the above
Last Answer : C. Direct connection with the engine power
Description : Turbo chargers are driven by A. Direct connection with engine power B. Exhaust gases from engine C. Electric current from the battery D. None of the above
Last Answer : B. Exhaust gases from engine
Description : Turbo chargers or super chargers increases engine power by A. 10-20% C. 50-60% B. 20-30% D. 90-100%
Last Answer : A. 10-20%
Description : .When the valves are carried in engine bioel at one side of each cylinder is called A. Valves in head arrangements B. L-head C. I-head D. None of the above
Last Answer : B. L-head
Description : An engine is called I or valve in head engine when a) Valve are immediately above the cylinder b) Both valves are on one side c) Both valves are on opposite direction d) None of the above
Last Answer : d) None of the above
Description : The estimated useful life of diesel engine is: A)8 years b)10 years C)12 years d)14years
Last Answer : b)10 years
Description : which of the following tractor has the cair cooled engine? A)ford b)eicher C)international d)hmt
Last Answer : b)eicher
Description : GOOD EARTH is one of the important make of (A) tractor (B) electric motor (C) diesel engine (D)power tiller
Last Answer : A) tractor
Description : Connecting rod of two stroke engine is subjected to A. Compressive load B. Tensile load C. Both compressive and tensile load D. None of the above
Last Answer : A. Compressive load
Description : Connecting rod of four stroke engine is subjected to A. Compressive load B. Tensile load C. Both compressive and tensile load D. None of the above
Last Answer : C. Both compressive and tensile load