he shape of the gross surface of the tillage tool is designated as a) Micro shape c) Edge shape b) Macro shape d) Gross shape

he shape of the gross surface of the tillage tool is designated as
a) Micro shape c) Edge shape
b) Macro shape d) Gross shape
by

1 Answer

Answer :

b) Macro shape
by

Related questions

________ refer to the surface roughness of the tool a) Micro shape c) Edge shape b) Macro shape d) Gross shape

Description : ________ refer to the surface roughness of the tool a) Micro shape c) Edge shape b) Macro shape d) Gross shape

Last Answer : a) Micro shape

_______ designates the shape of gross peripheral and cross-sectional boundaries of the soil working tool a) Micro shape c) Edge shape b) Macro shape d) Gross shape

Description : _______ designates the shape of gross peripheral and cross-sectional boundaries of the soil working tool a) Micro shape c) Edge shape b) Macro shape d) Gross shape

Last Answer : c) Edge shape

Curved twisted blades are specially suited for m. Minimum tillage of trashy land at shallow depths n. Dried hard soils o. Cutting and pulverisation in wet sticky clay soil p. For operating on the sides of plant bed

Description : Curved twisted blades are specially suited for m. Minimum tillage of trashy land at shallow depths n. Dried hard soils o. Cutting and pulverisation in wet sticky clay soil p. For operating on the sides of plant bed

Last Answer : p. For operating on the sides of plant bed

shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions

Description : shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions

Last Answer : i. Minimum tillage of trashy land at shallow depths

Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Description : Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Last Answer : f. Dried hard soils

Farming operation which requires maximum energy a.) Sowing b.) Interculture c.) Tillage d.) Harvesting

Description : Farming operation which requires maximum energy a.) Sowing b.) Interculture c.) Tillage d.) Harvesting

Last Answer : c.) Tillage

The ideal moisture content for the soil primary tillage operation a) Upper plastic limit of the soil b) Lower plastic limit c) Wilting Point d) All of the above

Description : The ideal moisture content for the soil primary tillage operation a) Upper plastic limit of the soil b) Lower plastic limit c) Wilting Point d) All of the above

Last Answer : a) Upper plastic limit of the soil

Depth of working of a tillage implement is controlled by a) Furrow Wheel b) Gauge Wheel c) Cage Wheel d) Star Wheel

Description : Depth of working of a tillage implement is controlled by a) Furrow Wheel b) Gauge Wheel c) Cage Wheel d) Star Wheel

Last Answer : d) Star Wheel

The two primery tillage equipment a. MB plough and disc harrow b. Disc plough and disc harrow c. Disc harrow and cultivetor d. MB plough and subsoiler

Description : The two primery tillage equipment a. MB plough and disc harrow b. Disc plough and disc harrow c. Disc harrow and cultivetor d. MB plough and subsoiler

Last Answer : d. MB plough and subsoiler

A power tiller is relatively more suitable for : A. Puddling of low land paddy fields with a rotary tiller B. Primary tillage of upland paddy fields with a rotary tillers C. Primary tillage with a mould board plough D. Farm transportation work

Description : A power tiller is relatively more suitable for : A. Puddling of low land paddy fields with a rotary tiller B. Primary tillage of upland paddy fields with a rotary tillers C. Primary tillage with a mould board plough D. Farm transportation work

Last Answer : A. Puddling of low land paddy fields with a rotary tiller

A Tillage implement moving at a constant velocity is subjected to a) Force of gravity b) Soil force (resistance) c) Pull of mower d) All of the above

Description : A Tillage implement moving at a constant velocity is subjected to a) Force of gravity b) Soil force (resistance) c) Pull of mower d) All of the above

Last Answer : d) All of the above

V-shaped sweeps are best suited for a ) Primary tillage b) Stubble mulch tillage c) Rotary tillage d) Minimum tillage

Description : V-shaped sweeps are best suited for a ) Primary tillage b) Stubble mulch tillage c) Rotary tillage d) Minimum tillage

Last Answer : b) Stubble mulch tillage

Scouring indicates: A. movement of soil on tool surface B. sticking of soil on tool surface C. inversion of soil D. none of the above

Description : Scouring indicates: A. movement of soil on tool surface B. sticking of soil on tool surface C. inversion of soil D. none of the above

Last Answer : A. movement of soil on tool surface

_________means movement of soils across a tool surface without sticking first to avoid soil build ups a) Pulverisation b) Inversion c) Scouring d) Turning

Description : _________means movement of soils across a tool surface without sticking first to avoid soil build ups a) Pulverisation b) Inversion c) Scouring d) Turning

Last Answer : c) Scouring

illage tool moving with uniform velocity is subjected to A)force of gravity. B)pull of power source C)soil reaction. D)all of the above

Description : illage tool moving with uniform velocity is subjected to A)force of gravity. B)pull of power source C)soil reaction. D)all of the above

Last Answer : D)all of the above

Which one of the below is a multipurpose tool a) Indigenous plough b) Cultivator c) Multipurpose tool bar carrier d) M.B plough

Description : Which one of the below is a multipurpose tool a) Indigenous plough b) Cultivator c) Multipurpose tool bar carrier d) M.B plough

Last Answer : c) Multipurpose tool bar carrier

The rotary and oscillating tool which does not turn the soil upside down is a) Power tiller b) Rotravator c) Power harrow d) Treader and rotary tiller

Description : The rotary and oscillating tool which does not turn the soil upside down is a) Power tiller b) Rotravator c) Power harrow d) Treader and rotary tiller

Last Answer : c) Power harrow

The amount of energy required to produce a given degree of pulverisation depends primarily on a) Soil strength b) Energy utilisation efficiency of tool c) Both (a) and (b) d) None of the above

Description : The amount of energy required to produce a given degree of pulverisation depends primarily on a) Soil strength b) Energy utilisation efficiency of tool c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

Scouring will occur as long as a) Frictional resistance at soil tool interface is less than the resistance at parallel soil-soil inter face b) Frictional resistance at soil tool interface is more than the resistance at parallel soil-soil inter face c) Soil-metal friction is more than angle of soil shearing resistance d) None of the above

Description : Scouring will occur as long as a) Frictional resistance at soil tool interface is less than the resistance at parallel soil-soil inter face b) Frictional resistance at soil tool interface is more than ... c) Soil-metal friction is more than angle of soil shearing resistance d) None of the above

Last Answer : a) Frictional resistance at soil tool interface is less than the resistance at parallel soil-soil inter face

Forces which a tool must overcome in cutting, breaking and moving the soil is called a) Useful soil resistance b) Parasitic force c) Draft of implement d) Pull of implement

Description : Forces which a tool must overcome in cutting, breaking and moving the soil is called a) Useful soil resistance b) Parasitic force c) Draft of implement d) Pull of implement

Last Answer : a) Useful soil resistance

.In Hydraulic sprayers, the degree of atomization is primarily a function of A. Liquid pressure and the nozzle characteristics B. Air velocity C. Size of the nozzle D. Size and shape of the atomizer

Description : .In Hydraulic sprayers, the degree of atomization is primarily a function of A. Liquid pressure and the nozzle characteristics B. Air velocity C. Size of the nozzle D. Size and shape of the atomizer

Last Answer : A. Liquid pressure and the nozzle characteristics

In hydraulic sprayers, the degree is primarily a function of: a) Liquid pressure and the nozzle characteristics b) Air velocity c) Size of the nozzle d) Shape and size of the atomizer

Description : In hydraulic sprayers, the degree is primarily a function of: a) Liquid pressure and the nozzle characteristics b) Air velocity c) Size of the nozzle d) Shape and size of the atomizer

Last Answer : a) Liquid pressure and the nozzle characteristics

Connecting rod generally have A)t-shape b)angle shape C)i-shape d)flst-shape

Description : Connecting rod generally have A)t-shape b)angle shape C)i-shape d)flst-shape

Last Answer : C)i-shape

The mechanical cleaning of sugar cane is done due to A. The different in the peripheral velocity of rollers B. Rough surface provided Or the outer surface of rollers C. Blow of air which forces the extraneous material out of the machine D. All of the above

Description : The mechanical cleaning of sugar cane is done due to A. The different in the peripheral velocity of rollers B. Rough surface provided Or the outer surface of rollers C. Blow of air which forces the extraneous material out of the machine D. All of the above

Last Answer : D. All of the above

0ff-set disc harrows are best suitable to work for a) primary implement b) breaking clods c) orchard cultivation d) surface finishing

Description : 0ff-set disc harrows are best suitable to work for a) primary implement b) breaking clods c) orchard cultivation d) surface finishing

Last Answer : c) orchard cultivation

ed planting is practiced for row crops in (a) Semi-arid conditions to place seed deep in moist soil (b) High rainfall areas to improve surface drainage (c) Irrigated areas leaving more space for operation of equipments (d) Both (b) and (c)

Description : ed planting is practiced for row crops in (a) Semi-arid conditions to place seed deep in moist soil (b) High rainfall areas to improve surface drainage (c) Irrigated areas leaving more space for operation of equipments (d) Both (b) and (c)

Last Answer : d) Both (b) and (c)

Lister planting or furrow planting is practiced for (a) High rainfall areas to improve surface drainage (b) Semi-arid conditions to place seed deep in moist soil (c) Areas where natural moisture conditions are favourable (d) Irrigated areas leaving more space for operation of equipments

Description : Lister planting or furrow planting is practiced for (a) High rainfall areas to improve surface drainage (b) Semi-arid conditions to place seed deep in moist soil (c) Areas where natural moisture conditions are favourable (d) Irrigated areas leaving more space for operation of equipments

Last Answer : (b) Semi-arid conditions to place seed deep in moist soil

Flat planting predominates where a) Nature moisture content is favourable b) Rainfall is high to provide surface drainage c) Semi arid areas to conserve moisture d) None of the above

Description : Flat planting predominates where a) Nature moisture content is favourable b) Rainfall is high to provide surface drainage c) Semi arid areas to conserve moisture d) None of the above

Last Answer : a) Nature moisture content is favourable

Soil acceleration increases draft because of a) Increased normal load on soil working surface b) Increased frictional resistance c) Kinetic energy imparted to the soil d) All of the above

Description : Soil acceleration increases draft because of a) Increased normal load on soil working surface b) Increased frictional resistance c) Kinetic energy imparted to the soil d) All of the above

Last Answer : d) All of the above

he amount of liquid required for ground spraying of agricultural crops is : a.) 400-600L/ha b.) 200-400L/ha c.) 1000-2000L/ha d.) 600-800L/ha

Description : he amount of liquid required for ground spraying of agricultural crops is : a.) 400-600L/ha b.) 200-400L/ha c.) 1000-2000L/ha d.) 600-800L/ha

Last Answer : a.) 400-600L/ha

he temperature at which solid content of fuel freeze out is called.... (a) Fire point (b) Flash point (c) Pour point (d) Cloud point

Description : he temperature at which solid content of fuel freeze out is called.... (a) Fire point (b) Flash point (c) Pour point (d) Cloud point

Last Answer : (a) Fire point

Which of the following is not a tractor drawn primary tillage tool? 1. Disc plough 2. rotavator 3. Country plough 4. Bar harrow

Description : Which of the following is not a tractor drawn primary tillage tool? 1. Disc plough 2. rotavator 3. Country plough 4. Bar harrow

Last Answer : ans 3

Which one of the following is not a secondary tillage tool? 1. Disc Plough 2. Disc harrow 3. Mould Board 4. none of these

Description : Which one of the following is not a secondary tillage tool? 1. Disc Plough 2. Disc harrow 3. Mould Board 4. none of these

Last Answer : ans 3

Which of the following is not a tractor drawn tillage tool? 1. Cultivator 2. Augar plough 3. Harrow 4. Plank

Description : Which of the following is not a tractor drawn tillage tool? 1. Cultivator 2. Augar plough 3. Harrow 4. Plank

Last Answer : ans 4

is not a tractor drawn tillage tool A. Cultivator B. Augar plough C. Narrow D. Plank

Description : is not a tractor drawn tillage tool A. Cultivator B. Augar plough C. Narrow D. Plank

Last Answer : Plank

is not a tractor drawn tillage tool: a) Cultivator c) Augar plough b) Harrow d) Plank

Description : is not a tractor drawn tillage tool: a) Cultivator c) Augar plough b) Harrow d) Plank

Last Answer : Plank

is the following is not a secondary tillage tool A. Disc plough C. Mould board B. Disc harrow D. None of the above

Description : is the following is not a secondary tillage tool A. Disc plough C. Mould board B. Disc harrow D. None of the above

Last Answer : disk harrow is secondry implement and mb plough and disk plouhg will be primarry implement

Which of the following refers to a management tool for organizing personnel, facilities, equipment, and communication for any emergency situation? a) The Incident Command System The Incident Command System (ICS) is a management tool for organizing personnel, facilities, equipment and communication for any emergency situation. The federal government mandates that the ICS be used during emergencies. Under this structure, one person is designated as incident commander. This person must be continuously informed of all activities and informed about any deviation from the established plan. While the ICS is primarily a field structure and process, aspects of it are used at the level of an individual hospital’s emergency response plan as well.

Description : Which of the following refers to a management tool for organizing personnel, facilities, equipment, and communication for any emergency situation? a) The Incident Command System The ... emergency preparedness required by the Joint Commission on Accreditation of Healthcare Organizations (JCAHO).

Last Answer : a) The Incident Command System The Incident Command System (ICS) is a management tool for organizing personnel, facilities, equipment and communication for any emergency situation. The federal government mandates ... are used at the level of an individual hospital's emergency response plan as well.

Justify use of tool inserts. State the materials used for inserts. Identify the parameters of insert designated as C – N – M – G – 12 – 04 – 08 as per ISO

Description : Justify use of tool inserts. State the materials used for inserts. Identify the parameters of insert designated as C – N – M – G – 12 – 04 – 08 as per ISO

Last Answer : Justification of tool inserts: The tools with indexible inserts of harder and special grade carbide or ceramic materials. A wear resistant layer of Titanium nitride of Titanium carbide is coated on the ... Symbol for tolerance 08: Turning insert nose radius G: symbol for fixing for chip breaker

Could someone explain this image of glass on a macro and micro level?

Description : Could someone explain this image of glass on a macro and micro level?

Last Answer : This wouldn’t happen to possibly be, say….your homework now, would it?

AP micro/macro?

Description : AP micro/macro?

Last Answer : answer:In my view, difficult concepts or fear of getting a C are bad reasons to not take a course. Looking back on high school and college, the tough courses were the ones where I ... ; Zinn's text shows how capitalistic ideas played out in practice, which I think is a valuable perspective.

……… are also called as parametric subroutines a.Micro b.Macro c.Sub Macro d.Sub Micro

Description : ……… are also called as parametric subroutines a.Micro b.Macro c.Sub Macro d.Sub Micro

Last Answer : b.Macro

$ All the living and non living matter is formed of molecules. ! Molecules are of two types (i) Micro-molecules (ii) Macro-molecules.

Description : $ All the living and non living matter is formed of molecules. ! Molecules are of two types (i) Micro-molecules (ii) Macro-molecules.

Last Answer : $ All the living and non living matter is formed of molecules. ! Molecules are of two types (i) Micro- ... is wrong D. If both As and R are wrong.

In your opinion what schools of economic and political thought are the most compatible with social work practice What are the incompatibilities in the various school of thought with macro and micro le?

Description : In your opinion what schools of economic and political thought are the most compatible with social work practice What are the incompatibilities in the various school of thought with macro and micro le?

Last Answer : This is an essay assignment that you need to do and it asks foran opinion. We don’t write essays for students and you need to doit. This is actually 2 questions that was given you.

What is the difference between Micro and Macro Economics?

Description : What is the difference between Micro and Macro Economics?

Last Answer : Microeconomics is the study of decisions that people and businesses make regarding the allocation of resources and prices of goods and services. This means also taking into account taxes and regulations ... is affected by changes in unemployment, national income, rate of growth, and price levels.

A computer which CPU speed around 100 million instruction per second and with the word length of around 64 bits is known as A) Super computer B) Mini computer C) Micro computer D) Macro computer

Description : A computer which CPU speed around 100 million instruction per second and with the word length of around 64 bits is known as A) Super computer B) Mini computer C) Micro computer D) Macro computer

Last Answer : Answer : A

Price theory is also known as - (1) Macro Economics (2) Development Economics (3) Public Economics (4) Micro Economics

Description : Price theory is also known as - (1) Macro Economics (2) Development Economics (3) Public Economics (4) Micro Economics

Last Answer : (4) Micro Economics Explanation: Price theory is also known as micro economics and is concerned with the economic behaviour of individual consumers, producers and resource owners. Prof. Leftwich ... owners to business firms with their evaluation and with their allocation among alternative uses."

The principle of maximum social advantage is the basic principle of - (1) Micro Economics (2) Macro Economics (3) Fiscal Economics (4) Environmental Economics

Description : The principle of maximum social advantage is the basic principle of - (1) Micro Economics (2) Macro Economics (3) Fiscal Economics (4) Environmental Economics

Last Answer : (3) Fiscal Economics Explanation: The 'Principle of Maximum Social Advantage', introduced by British economist Hugh Dalton, is the fundamental principle of Public Finance which implies that all ... problems related to government taxation and spending, it comes under the domain of fiscal economics.

The terms "Micro Economics" and "Macro Economics" were coined by - (1) Alfred Marshall (2) Ragner Nurkse (3) Ragner Frisch (4) J.M. Keynes

Description : The terms "Micro Economics" and "Macro Economics" were coined by - (1) Alfred Marshall (2) Ragner Nurkse (3) Ragner Frisch (4) J.M. Keynes

Last Answer : (3) Ragner Frisch Explanation: The terms microeconomics and macroeconomics were coined by Professor Ragnar Frisch of Oslo University for the first time in 1933 and since then they gained popularity and ... number of significant advances in the field of economics and coined a number of new words.

The operation executed on data stored in registers is called_______ A. Macro-operation B. Micro-operation C. Bit-operation D. None of the Above

Description : The operation executed on data stored in registers is called_______ A. Macro-operation B. Micro-operation C. Bit-operation D. None of the Above

Last Answer : B. Micro-operation