Description : The items of fixed cost are: a. Depreciation and labour b. insurance and repair c. Taxes and fuels d. Interest and housing
Last Answer : d. Interest and housing
Description : If variable part of annual cost on account of interest and depreciation on the capital outlay is equal to the annual cost of electrical energy wasted in the conductors, the total annual cost will be minimum and the ... (b) Ohm's law (c) Kirchhoffs law (d) Faraday's law (e) none of the above
Last Answer : (a) Kelvin's law
Description : In declining balance method of depreciation calculation, the (A) Value of the asset decreases linearly with time (B) Annual cost of depreciation is same every year (C) Annual depreciation is the fixed percentage of the property value at the beginning of the particular year (D) None of these
Last Answer : (C) Annual depreciation is the fixed percentage of the property value at the beginning of the particular year
Description : Pick out the wrong statement. (A) The annual depreciation rate for machinery and equipments in a chemical process plant is about 10% of the fixed capital investment (B) Annual depreciation rate ... chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)
Last Answer : (D) In a chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)
Description : A machine has an initial value of Rs. 5000, service life of 5 years and final salvage value of Rs. 1000. The annual depreciation cost by straight line method is Rs. (A) 300 (B) 600 (C) 800 (D) 1000
Last Answer : (C) 800
Description : Utility index is a indication of A. Work machine contact hours B. Wear out life of machine C. Operating cost of machine D. Reliability of machine working
Last Answer : A. Work machine contact hours
Description : variable speed governors are used on ∙ Tractor engine(diesel) ∙ Stationary engine (diesel) ∙ Petrol engine ∙ None of the above
Last Answer : ∙ Tractor engine(diesel)
Description : A company's break even point is 6,000 units per annum. The selling price is Rs. 90 per unit and the variable cost is Rs. 40 per unit. What are the company's annual fixed costs? (a) Rs. 120 (b) Rs. 2,40,000
Last Answer : 5,40,000
Description : A company makes a single product and incurs fixed costs of Rs. 30,000 per annum. Variable cost per unit is Rs. 5 and each unit sells for Rs. 15. Annual sales demand is 7,000 units. The breakeven point is: (a) 2,000 units (b) 3,000 units (c) 4,000 units (d) 6,000 units
Last Answer : (b) 3,000 units
Description : Swinging drawbar is advantageous because it help A. Taking short turn with machine wider than the tractor B. Reduces side draft C. Leaves only small area uncovered at corner of the fied D. All the above
Last Answer : A. Taking short turn with machine wider than the tractor
Description : The mechanical cleaning of sugar cane is done due to A. The different in the peripheral velocity of rollers B. Rough surface provided Or the outer surface of rollers C. Blow of air which forces the extraneous material out of the machine D. All of the above
Last Answer : D. All of the above
Description : The upper safe noise level for machine operator is: A. 85 db B.100db C. 110db D.115db
Last Answer : A. 85 d
Description : The method which depreciates the tractor or machine to zero at the end of its expected life is known as: A. Estimated value B. Sum-of-the digits C. Declining balance D. Straight line
Last Answer : D. Straight line
Description : The size of a seed rill is expressed by: A. Amount of seed sown per unit time. B. Length x width of the machine. C. Area covered per unit time. D. The number of furrow openers x distance between two furrow
Last Answer : D. The number of furrow openers x distance between two furrow
Description : Speed of power operated machine chaff cutter is E. 35 rpm F. 50 rpm G. 600-1000 rpm H. None of the above
Last Answer : G. 600-1000 rpm
Description : knives of the cutter bar are scrratedin order to a)Increase the co-efficient of friction between crop stalk machine b)Reducing the deflection of stalk side ways c)To increase the cutting speed d)To improve cutting height
Last Answer : a)Increase the co-efficient of friction between crop stalk machine
Description : Free (threshed) seed carried over the walker or rack in straw and discharge from the rear of machine is called as (a) Cylinder loss (b) walker loss(rack loss) (c) Shoe loss (d) gathering loss
Last Answer : (b) walker loss(rack loss)
Description : Unthreshed seed discharged from the rear of the machine either in straw or in the material from the cleaning shoe is called (a)cylinder loss (b)walker loss (rack loss) (c)shoe loss (d) gathering loss
Last Answer : (a)cylinder loss
Description : Annual depreciation cost are not constant when, the __________ method of depreciation calculation is used. (A) Straight line (B) Sinking fund (C) Present worth (D) Declining balance
Last Answer : (D) Declining balance
Description : A reactor having a salvage value of Rs. 10000 is estimated to have a service life of 10 years. The annual interest rate is 10%. The original cost of the reactor was Rs. 80000. The book value of the reactor after 5 years ... method will be Rs. (A) 40,096 (B) 43,196 (C) 53,196 (D) 60,196
Last Answer : D) 60,196
Description : . A Local Authority is preparing cash Budget for its refuse disposal department. Which of the following items would not be included in the cash budget? (a) Capital cost of a new collection vehicle (b) Depreciation of the machinery (c) Operatives wages (d) Fuel for the collection
Last Answer : (b) Depreciation of the machinery
Description : If the excavation of earth is done manually then it costs Rs. 10 per cum. A machine can excavate at a fixed cost of Rs. 4000 plus a variable cost of Rs. 2 per cum. The quantity of earth for which the cost ... the cost of manual excavation is (A) 500 cum (B) 1000 cum (C) 1500 cum (D) 2000 cum
Last Answer : (A) 500 cum
Description : Which of the following costs would be considered a fixed cost? A. Raw materials. B. Depreciation. C. Bad-debt losses. D. Production labor.
Last Answer : B. Depreciation.
Description : The depreciation during the year 'n', in diminishing balance method of depreciation calculation, is calculated by multiplying a fixed percentage 'N' to the (A) Initial cost (B) Book value at the end ... ) Depreciation during the (n - 1)th year (D) Difference between initial cost and salvage value
Last Answer : (B) Book value at the end of (n - 1)th year
Description : GDP at factor cost exceeds GDP at market price (a) When the factor income from abroad is negative ; (b) When depreciation on fixed capital exceeds income in investment; (c) When direct tax exceeds indirect tax ; (d) When subsidies exceeds indirect taxes.
Last Answer : (d) When subsidies exceeds indirect taxes.
Description : why Novelty Chemicals bought a Motor Vehicle for$110,000 on January 5, 2016. The estimated usefullife of the vehicle is ten years. The disposal valueis estimated at $10,000. Annual depreciation is onthe straight line method?
Last Answer : Novelty Chemicals bought a Motor Vehicle for$110,000 on January 5, 2016. The estimated usefullife of the vehicle is ten years. The disposal valueis estimated at $10,000. Annual ... for annualdepreciation.d) The Balance Sheet extracts for motor vehicle and itsrelated depreciation.full question
Description : A Firm is considering undertaking a project that would yield annual profits (after depreciation) of Rs 68,000 for 5 years. The initial outlay of the project would be Rs 800,000 and the project's assets would have ... accounting rate of return for this project? A 16% B 8.5% C 8.0% D 9.1%
Last Answer : A 16%
Description : Depreciation (A) Costs (on annual basis) are constant when the straight line method is used for its determination (B) Is the unavoidable loss in the value of the plant, equipment and materials with lapse in time ... income tax liability on cash flows from an investment (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Last Answer : Annual depreciation as per straight line method, is calculated by the capital cost minus the salvage value, is divided by the number of years of life.
Description : There are 2 plants manufacturing the same product under one corporate management which has decided to merge them. Calculate Break -even point of the merged plant. Particulars Plant I Plant II Capacity operation 100% ... 000 2,40,000 Variable cost 4,40,000 1,80,000 Fixed cost 80,000 50,000simpl
Last Answer : c) Rs 5,00,000
Description : Ashwin purchased a second hand machine for Rs.1 lakh. Over the first year after its purchase. He incurred an expense of Rs.20000 in maintaining it. At the end of the first year he sold it for Rs.80000. Find his ... account of depreciation. a)12.5% profit b)12.5% loss c)11 1/9% profit d)11 1/9% loss
Last Answer : d)11 1/9% loss
Description : The retrofitting of a variable speed drive in a plant costs Rs 2 lakh. The annual savingsis Rs 0.5 lakh. The maintenance cost is Rs. 5,000/year. The return on investment is a) 25% b) 22.5% c) 24% d) 27.5%
Last Answer : b) 22.5%
Description : verticalsuctioninmouldboardploughis______whereashorizontalsuctionis______
Last Answer : .0.3to0.5cm,0.5cm
Description : Byincreasingdiskangle,depthpenetration_____beoverwithofcut_______
Last Answer : .decreases,increases
Description : A paddy transplanter uses either root wash type seedlings or __________ seedlings.
Last Answer : soil bearing
Description : An indigenous plough cuts a _________furrow cross sect
Last Answer : Trapizoidal
Description : The unit of filter medium resistance is________
Last Answer : L^-1
Description : The average working speed of a hand operated chaff fitted with two knives is _________ rev/min.
Last Answer : 35
Description : In a combine harvester the peripheral speed of the cylinder ranges between ________ m/min.
Last Answer : 1200 to 1500
Description : In sprayers , operating pressures below ___________Kpa are undesirable for hydraulic nozzles other than flooding type
Last Answer : 140
Description : Optimum speed for grains like gram,pea,etc.,thresher using power is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm
Last Answer : a) 300-400rpm
Description : Optimum operating cylinder speed for wheat threshing using power operated thresher is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm
Last Answer : d) 1100-1200rpm
Description : Optimum operating cylinder speed for the power operated maize sheller is a) 200-400rpm b) 400-600rpm c) 600-800rpm d) 1000-1200rpm
Last Answer : c) 600-800rpm
Description : Air output of a duster is given by formula a) Q= 60×A×V b)Q= 60×A×(2GH/Y) c) Q= 240×A×h d) all of the above
Last Answer : d) all of the above
Description : Lewis formula is used in the design of a) gears b) clutch c) chain drive d) belt drives
Last Answer : a) gears
Description : Transplanter using soil bearing seedlings are more popular than washed root seedling transplanter because of a) less labour requirement b) lesser plant missing percentage c) higher work rates d) all of the above
Description : Superchargers are driven by A. Electric current from the battery B. Exhaust gases from engine C. Direct connection with the engine power D. None of the above
Last Answer : C. Direct connection with the engine power
Description : Turbo chargers are driven by A. Direct connection with engine power B. Exhaust gases from engine C. Electric current from the battery D. None of the above
Last Answer : B. Exhaust gases from engine
Description : Turbo chargers or super chargers increases engine power by A. 10-20% C. 50-60% B. 20-30% D. 90-100%
Last Answer : A. 10-20%
Description : .When the valves are carried in engine bioel at one side of each cylinder is called A. Valves in head arrangements B. L-head C. I-head D. None of the above
Last Answer : B. L-head