What is the best cost effective way to use central heating.

What is the best cost effective way to use central heating.
by

1 Answer

Answer :

no don’t close the doors. The air needs to recycle itself, so you need proper circulation. close vents in rooms you don’t use and use directional vents pointing down (winter months) in the rooms you do. One last thing, make sure you have a clean filter.
by

Related questions

can induction heating is use for both magnetic and non magnetic material ?

Last Answer : Yes, Induction heating is used for both magnetic and non-magnetic materials.

Can underfloor heating be installed under the wooden floor ?

Description : Can underfloor heating be installed under the wooden floor ?

Last Answer : Under-floor hydronic or steam heat can certainly be installed underneath wooden floors. I have personally installed one instance of hydronic (hot water) heat system under wooden flooring, and have demolished ... heat, but I have visited such places on many occasions and found them very comfortable.

How to Install Baseboard Heating

Description : How to Install Baseboard Heating

Last Answer : How to Install Baseboard Heating If you have a small apartment or room that you want to heat in an efficient manner, one effective method is by using electric baseboard heating. Installing it yourself might seem ... these steps and you're sure to have a cozy and warm indoor area, all the time.

How to Make a Heating Pad ?

Description : How to Make a Heating Pad ?

Last Answer : A heating pad is a very important item to have around in the household. Whether it's a headache, menstrual cramps or other pains, a heating pad would make for a great help. This heating pad is also made ... is that there are a myriad of ways we can use for things that we think are no longer useful.

How to install autonomous heating?

Description : How to install autonomous heating?

Last Answer : Autonomous heating and hot water supply is gaining popularity and is used not only in winter, but also in summer. The reason for this, as a rule, is large bills from utilities, as well as the ... a boiler, you should not save on the reliability of the boiler, on control equipment and on service.

Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Description : Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Last Answer : Parts Insulating Materials  Insulation between heating element and base plate of electric iron. Mica Insulation used over copper or aluminium conductor used for making coils.  ... Transformer bushings Porcelain  Insulation between transmission line and pole. Porcelain

State advantages of electric heating over other types of heating methods.

Description : State advantages of electric heating over other types of heating methods.

Last Answer : Advantages of Electric heating over the other types of heating methods: 1. It can be put into service immediately. 2. No standby losses. 3. High efficiency. 4. More economical ... low attention and supervision. 14. Protection against overheating can be provided by suitable switch gear. 

Enlist any four advantages of induction heating.

Description : Enlist any four advantages of induction heating. 

Last Answer : Advantages of Induction heating https://youtu.be/RcdH_74VJz0

_________ is used for heating non -conducting materials.

Description : _______ is used for heating non -conducting materials.  (1) Eddy current heating (2) Arc heating (3) Induction heating (4) Dielectric heating

Last Answer : Dielectric heating is used for heating non -conducting materials. 

The range of frequencies used in induction heating is :

Description : The range of frequencies used in induction heating is :  (A) 0-25 Hz  (C) less than 200 Hz  (B) 50 to 100 Hz  (D) more than 1 kHz

Last Answer : The range of frequencies used in induction heating is : more than 1 kHz

The frequencies and voltage used in Dielectric heating are

Description : The frequencies and voltage used in Dielectric heating are (A) 10 – 30 MHz, upto 25 kV (B) 50 – 60 Hz, upto 25 kV (C) 10 – 30 MHz, upto 100 V (D) 50 – 60 Hz, 110 V – 230 V

Last Answer : The frequencies and voltage used in Dielectric heating are 10 – 30 MHz, upto 25 kV

In order that current should flow without causing excessive heating or voltage drop, the relay contacts should?

Last Answer : In order that current should flow without causing excessive heating or voltage drop, the relay contacts should have low contact resistance, be clean and smooth, be of sufficient size and proper shape.

Any recommendations for wood stoves?

Description : Any recommendations for wood stoves?

Last Answer : We had a fireplace insert decades ago. It put out heat, of course, but in no way compared to our free standing, cast iron fireplace which could heat up a small city . It looked cool to me; that’s a matter of taste of whether you like a rustic look. For safety, we never gave it a second thought.

What type of furnace do I need?

Description : What type of furnace do I need?

Last Answer : What is your current heat source for the baseboard heaters? For example, are they electric baseboard heaters or hot water/steam baseboard heaters?

Can you recommend a good space heater?

Description : Can you recommend a good space heater?

Last Answer : I suggest a ceramic heater because it is cool to the touch and puts out a lot of heat. I have a small one that heats up my entire family room in the basement.

Is central heating in a four room house more cost effective than a wood furnace?

Description : Is central heating in a four room house more cost effective than a wood furnace?

Last Answer : Wood is fairly expensive. It can be if you can cut your own wood though.

Is Microsoft Dynamics 365 Business Central deployment easy and cost-effective?

Description : Is Microsoft Dynamics 365 Business Central deployment easy and cost-effective?

Last Answer : Microsoft Dynamics 365 Business Central helps large and mid-sized organization excel their productivity in the workspace and accelerate growth at a higher speed. But making a correct choice for the ... and the consultancy services are also advanced. They have a strong base in technology and fol

Are heated towel rails safe All of our electric towel rails are pre-filled with a water-based solution containing a mix of central heating preservatives. What is the best price of Towel Rail per Packet?

Description : Are heated towel rails safe All of our electric towel rails are pre-filled with a water-based solution containing a mix of central heating preservatives. What is the best price of Towel Rail per Packet?

Last Answer : Yes, our heated towel rails are safe. We have been manufacturing and selling Heated Towel Rails for nearly ten years and know what makes a great towel rail. If you are installing a heated ... will provide the correct heat output. Heated Towel Rails are now a common feature in modernized homes,

Can tenants in a municipal house request a disconnection from central heating?

Description : If the tenants of all apartments agree and are interested in disconnection from central heating - where to request a change in the heating of the apartment, how to proceed? In the case of disconnection of an ... have to be paid for common areas (how many%, from the basic or consumer component)?

Last Answer : Of course you can ask for anything. The question is whether it will be complied with. In this case, it would be necessary to apply to the homeowner. How much would it cost and common areas could not be determined. It would be different for every company and every apartment.

If central heating system cannot be installed as per the clients original specification what should a plumber do?

Description : If central heating system cannot be installed as per the clients original specification what should a plumber do?

Last Answer : advise their immeddiate supervisor or employer about the problem, obtain the clients verbal agreemenet to carry out the alterations, obtain the clients written agreement to carry out the alterations, proceed when the clients quantity surveoyor issues a variationorder

If central heating system cannot be installed as per the clients original specification what should a plumber do?

Description : If central heating system cannot be installed as per the clients original specification what should a plumber do?

Last Answer : advise their immeddiate supervisor or employer about the problem, obtain the clients verbal agreemenet to carry out the alterations, obtain the clients written agreement to carry out the alterations, proceed when the clients quantity surveoyor issues a variationorder

Is radiant heating more environmentally friendly than central heating?

Description : Is radiant heating more environmentally friendly than central heating?

Last Answer : Yes Radiant heating is more environmentally friendly than central heating. You will find that out after you start saving money on radiant heating. Your Welcome.

With central heating can the heat be controlled in each room?

Description : With central heating can the heat be controlled in each room?

Last Answer : You cannot control heating in individual rooms. Central heating provides heating to various rooms in a house or building from one location.

Are there any systems that provide central heating and cooling in one location?

Description : Are there any systems that provide central heating and cooling in one location?

Last Answer : Yes. HVAC systems offer both heating and cooling.

What is the energy consumption comparison between space heaters and central heating?

Description : What is the energy consumption comparison between space heaters and central heating?

Last Answer : Space heaters are inherently inefficient and should only be used in small applications where a bigger system is either unnecessary or unnecessarily expensive.

How much does a heating and central air conditioning system, when you start from scratch?

Description : How much does a heating and central air conditioning system, when you start from scratch?

Last Answer : From what I know they are cheap to purchase, but you need to take into account you will be paying for them on a monthly basis. Which means if you run your air all the time you will be ... run out air in California straight during the summer it's pretty pricey, but this is also California pricing.

If a central heating system cannot be installed as per the clients original specifications what should plumber do?

Description : If a central heating system cannot be installed as per the clients original specifications what should plumber do?

Last Answer : advise their immeddiate supervisor or employer about the problem , obtain the clients verbal agreemenet to carry out the alterations , obtain the clients written agreement to carry out the alterations , proceed when the clients quantity surveoyor issues a variation order

Indian monsoon is marked by seasonal shift caused by: [Teachers' Exam 1994] (a) differential heating of land and sea (b) cold winds of Central Asia (c) great uniformity of temperature (d) None of these

Description : Indian monsoon is marked by seasonal shift caused by: [Teachers' Exam 1994] (a) differential heating of land and sea (b) cold winds of Central Asia (c) great uniformity of temperature (d) None of these

Last Answer : Ans: (a)

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

If a rectangular pre-stressed beam of an effective span of 5 meters and carrying a total load 3840 kg/m, is designed by the load balancing method, the central dip of the parabolic tendon should be (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Description : If a rectangular pre-stressed beam of an effective span of 5 meters and carrying a total load 3840 kg/m, is designed by the load balancing method, the central dip of the parabolic tendon should be (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Last Answer : Answer: Option B

In a singly reinforced beam, the effective depth is measured from its compression edge to (A) Tensile edge (B) Tensile reinforcement (C) Neutral axis of the beam (D) Longitudinal central axis

Description : In a singly reinforced beam, the effective depth is measured from its compression edge to (A) Tensile edge (B) Tensile reinforcement (C) Neutral axis of the beam (D) Longitudinal central axis

Last Answer : Answer: Option B

The antiparkinsonian action of central anticholinergics has the following features except: A. They control tremor more than rigidity B. They produce a low ceiling therapeutic effect C. They are effective in neuroleptic drug induced parkinsonism D. They are the preferred drugs in advanced case

Description : The antiparkinsonian action of central anticholinergics has the following features except: A. They control tremor more than rigidity B. They produce a low ceiling therapeutic effect C. They are effective in neuroleptic drug induced parkinsonism D. They are the preferred drugs in advanced case

Last Answer : D. They are the preferred drugs in advanced cases

Generally in all researches, an abstract of each article has been prepared which focuses upon Options: A) The central theme of the research paper B) The research-innovation employed in research paper C) The effective conclusions of the research paper D) All of the above

Description : Generally in all researches, an abstract of each article has been prepared which focuses upon Options: A) The central theme of the research paper B) The research-innovation employed in research paper C) The effective conclusions of the research paper D) All of the above

Last Answer : D) All of the above