Is central heating in a four room house more cost effective than a wood furnace?

Is central heating in a four room house more cost effective than a wood furnace?
by

1 Answer

Answer :

Wood is fairly expensive. It can be if you can cut your own wood though.
by

Related questions

What is the best cost effective way to use central heating.

Description : What is the best cost effective way to use central heating.

Last Answer : no don’t close the doors. The air needs to recycle itself, so you need proper circulation. close vents in rooms you don’t use and use directional vents pointing down (winter months) in the rooms you do. One last thing, make sure you have a clean filter.

With central heating can the heat be controlled in each room?

Description : With central heating can the heat be controlled in each room?

Last Answer : You cannot control heating in individual rooms. Central heating provides heating to various rooms in a house or building from one location.

Cost of a wood burning furnace?

Description : Cost of a wood burning furnace?

Last Answer : A wood burning furnace installed will run you a few thousand dollars and as much as four or five thousand dollars. That being said your heat bill will be cut down to almost nothing and you can probably get a rebate on your taxes for getting a energy efficient appliance.

Can tenants in a municipal house request a disconnection from central heating?

Description : If the tenants of all apartments agree and are interested in disconnection from central heating - where to request a change in the heating of the apartment, how to proceed? In the case of disconnection of an ... have to be paid for common areas (how many%, from the basic or consumer component)?

Last Answer : Of course you can ask for anything. The question is whether it will be complied with. In this case, it would be necessary to apply to the homeowner. How much would it cost and common areas could not be determined. It would be different for every company and every apartment.

Choose the correct option the code regarding roasting process. (I) It is the process of heating the ore in air in a reverberatory furnace to obtain th

Description : Choose the correct option the code regarding roasting process. (I) It is the process of heating the ore in air in a reverberatory furnace to obtain th

Last Answer : Choose the correct option the code regarding roasting process. (I) It is the process of heating the ore in air ... III and IV D. I , II , III and IV

A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. This is known as

Description : A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. This is known as

Last Answer : A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. ... Smelting B. Calcination C. Roasting D. Liquition

Furnace Forced Heating Repair?

Description : Furnace Forced Heating Repair?

Last Answer : form_title=Furnace Forced Heating Repair form_header=8703 Why is your heating system in need of service?*= [] Annual/Preventative Maintenance [] Nothing happens when it's turned on [] No heat in one location [] ... you have.*= () Natural gas fired () Propane gas fired () Oil fired () Electric fired

Is there a company specializing in older furnace heating repair?

Description : Is there a company specializing in older furnace heating repair?

Last Answer : When your furnace stops functioning properly, it can be more than a real inconvenience. It can also be a danger if the temperatures outside are extremely cold. Unfortunately, furnaces, like other household ... old), they can recommend brands and models and may even be able to save you money.

Air at a particular humidity is heated in a furnace. The new dew point (A) Decreases (B) Increases (C) Depends on the extent of heating (D) Remain unchanged

Description : Air at a particular humidity is heated in a furnace. The new dew point (A) Decreases (B) Increases (C) Depends on the extent of heating (D) Remain unchanged

Last Answer : (B) Increases

The radiation heat flux from a heating element at a temperature of 800°C, in a furnace maintained at 300°C is 8 kW/m2 . The flux, when the element temperature is increased to 1000°C for the same furnace temperature is (A) 11.2 kW/m2(B) 12.0 kW/m2(C) 14.6 kW/m2(D) 16.5 kW/m

Description : The radiation heat flux from a heating element at a temperature of 800°C, in a furnace maintained at 300°C is 8 kW/m2 . The flux, when the element temperature is increased to 1000°C for the same furnace temperature is (A) 11.2 kW/m2 (B) 12.0 kW/m2 (C) 14.6 kW/m2 (D) 16.5 kW/m

Last Answer : (D) 16.5 kW/m2

The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Description : The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Last Answer : (B) Flow of current through a heating element

In low or standard frequency induction furnace, heat is produced by the (A) Combination of induced current and skin effect (B) Induction and resistance (C) Current flow through a heating element (D) None of these

Description : In low or standard frequency induction furnace, heat is produced by the (A) Combination of induced current and skin effect (B) Induction and resistance (C) Current flow through a heating element (D) None of these

Last Answer : (B) Induction and resistance

Which furnace employs preheating, heating and soaking zones? (A) Soaking pit (B) Reheating furnace (C) Open hearth furnace (D) Cupola

Description : Which furnace employs preheating, heating and soaking zones? (A) Soaking pit (B) Reheating furnace (C) Open hearth furnace (D) Cupola

Last Answer : (B) Reheating furnace

Specific heating capacity of a furnace is expressed as (A) Weight heated/hr (B) Weight heated/furnace volume (C) Weight heated/hr/furnace volume (D) None of these

Description : Specific heating capacity of a furnace is expressed as (A) Weight heated/hr (B) Weight heated/furnace volume (C) Weight heated/hr/furnace volume (D) None of these

Last Answer : (C) Weight heated/hr/furnace volume

If the flame is produced under the hearth and then sweeps up into the heating chamber, this is called a/an __________ furnace. (A) Sidefired (B) Underfired (C) Covered (D) Recirculating

Description : If the flame is produced under the hearth and then sweeps up into the heating chamber, this is called a/an __________ furnace. (A) Sidefired (B) Underfired (C) Covered (D) Recirculating

Last Answer : (B) Underfired

Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80

Description : Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80

Last Answer : (D) 80

Reheating furnace (pusher type) is used for heating (A) Ingots (B) Slabs (C) Steel coils (D) Steel sheets

Description : Reheating furnace (pusher type) is used for heating (A) Ingots (B) Slabs (C) Steel coils (D) Steel sheets

Last Answer : (B) Slabs

Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace

Description : Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace

Last Answer : (C) Salt bath furnace

Blast furnace stoves are meant for heating (A) Air (B) Blast furnace gas (C) Steam (D) None of these

Description : Blast furnace stoves are meant for heating (A) Air (B) Blast furnace gas (C) Steam (D) None of these

Last Answer : (A) Air

Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Last Answer : (B) 25-30

Which is a regenerative furnace? (A) Coke oven heating chamber (B) Open hearth furnace (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Which is a regenerative furnace? (A) Coke oven heating chamber (B) Open hearth furnace (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Reverberatory furnace is used for (A) Roasting/reduction of ores (B) Annealing steel coil (C) Heating air (D) Steel melting

Description : Reverberatory furnace is used for (A) Roasting/reduction of ores (B) Annealing steel coil (C) Heating air (D) Steel melting

Last Answer : (A) Roasting/reduction of ores

The heating capacity of muffle furnace depends on the (A) Surface area & emissivity of the stock (B) Properties of the muffle wall (temperature, area, and emissivity) (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The heating capacity of muffle furnace depends on the (A) Surface area & emissivity of the stock (B) Properties of the muffle wall (temperature, area, and emissivity) (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

. An example of a periodic furnace is the (A) Blast furnace stoves (B) Blast furnace (C) Coke oven heating chamber (D) Rotary kilns

Description : . An example of a periodic furnace is the (A) Blast furnace stoves (B) Blast furnace (C) Coke oven heating chamber (D) Rotary kilns

Last Answer : (A) Blast furnace stoves

Which is not accomplished in an underfired furnace? (A) Increase in heating capacity/m2 of floor space (B) Elimination of cold spot at the bottom of the charge (C) Reduction in the temperature of furnace gases (D) Protection of the periphery of the charge from excessive radiation

Description : Which is not accomplished in an underfired furnace? (A) Increase in heating capacity/m2 of floor space (B) Elimination of cold spot at the bottom of the charge (C) Reduction in the temperature of furnace gases (D) Protection of the periphery of the charge from excessive radiation

Last Answer : (A) Increase in heating capacity/m2 of floor space

Which of the following variables affects the furnace capacity? (A) Temperature of flue gas (B) Thermal conductivity of stock (C) Thickness of heating stock(D) All (A), (B) and (C)

Description : Which of the following variables affects the furnace capacity? (A) Temperature of flue gas (B) Thermal conductivity of stock (C) Thickness of heating stock (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The heating capacity of continuous reheating furnace depends upon the (A) Hearth area and furnace temperature (B) Emissivity of the stock (C) Ratio of wall surface to stock surface (D) All (A), (B) and (C)

Description : The heating capacity of continuous reheating furnace depends upon the (A) Hearth area and furnace temperature (B) Emissivity of the stock (C) Ratio of wall surface to stock surface (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Blast furnace coke is made from coal by (A) Low temperature carbonisation (B) High temperature carbonisation (C) Medium temperature carbonisation (D) Heating the coal in an oven in presence of air

Description : Blast furnace coke is made from coal by (A) Low temperature carbonisation (B) High temperature carbonisation (C) Medium temperature carbonisation (D) Heating the coal in an oven in presence of air

Last Answer : (B) High temperature carbonisation

Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the (A) Hot scarfing of steel slabs (B) Mixing with blast furnace gas (C) Coke oven battery heating (D) Steel ladle drying

Description : Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the (A) Hot scarfing of steel slabs (B) Mixing with blast furnace gas (C) Coke oven battery heating (D) Steel ladle drying

Last Answer : (C) Coke oven battery heating

Heating a mixture of phosphate rock, coke and sand in an electric furnace produces (A) Phosphoric acid (B) Ammonium phosphate (C) Phosphorous (D) Superphosphate

Description : Heating a mixture of phosphate rock, coke and sand in an electric furnace produces (A) Phosphoric acid (B) Ammonium phosphate (C) Phosphorous (D) Superphosphate

Last Answer : (C) Phosphorous

Heating of coke, sand & phosphate rock in an electric furnace is done for the manufacture of (A) Phosphoric acid (B) Superphosphate (C) Phosphorous (D) Triple superphosphate

Description : Heating of coke, sand & phosphate rock in an electric furnace is done for the manufacture of (A) Phosphoric acid (B) Superphosphate (C) Phosphorous (D) Triple superphosphate

Last Answer : (C) Phosphorous

In a furnace with heating element temperature at 1700°C, the dominant mechanism of heat transfer will be (A) Conduction (B) Radiation (C) Natural convection (D) Forced convection

Description : In a furnace with heating element temperature at 1700°C, the dominant mechanism of heat transfer will be (A) Conduction (B) Radiation (C) Natural convection (D) Forced convection

Last Answer : (B) Radiation

Find false statement about effect of sulphur in fuel? (A) It has heating value (B) It helps in electrostatic precipitation of ash in flue gases (C) It leads to corrosion of air heaters, ducting, etc. if flue gas exit temperature is low (D) It erodes furnace walls

Description : Find false statement about effect of sulphur in fuel? (A) It has heating value (B) It helps in electrostatic precipitation of ash in flue gases (C) It leads to corrosion of air heaters, ducting, etc. if flue gas exit temperature is low (D) It erodes furnace walls

Last Answer : (D) It erodes furnace walls

In the heating process of the ________type a simple method of temperature control is possible by means of a special alloy which loses its magnetic properties at a particular high temperature and regains them when cooled to a temperature below this value. (A) Indirect induction over (B) core type induction furnace (C) coreless induction furnace (D) high frequency eddy current

Description : In the heating process of the ________type a simple method of temperature control is possible by means of a special alloy which loses its magnetic properties at a particular high temperature and regains ... ) core type induction furnace (C) coreless induction furnace (D) high frequency eddy current

Last Answer : Ans: D Magnetic property of alloy changes with change of the temperature and Heat is produced due to eddy current = i2R and i α f2

Outdoor Wood Furnace?

Description : Outdoor Wood Furnace?

Last Answer : form_title= Outdoor Wood Furnace form_header= Stay warm with an outdoor wood furnace. What is your budget for a furnace?*= _ [50] What size furnace do you need?*= _ [50] Where will the furnace be installed?*= _ [50]

Where can I buy a wood furnace?

Description : Where can I buy a wood furnace?

Last Answer : LL Bean definitely offers simialr products: http://reviews.llbean.com/1138/IG104421/stovetop-steamer-reviews/reviews.htm. If that's not satisfactory, it wouldn't hurt to try other companies.

How is a wood furnace installed?

Description : How is a wood furnace installed?

Last Answer : Installing a wood furnace is always better to be left to professionals or people that have past experience doing it. The reason is that the exaust pipes have to be installed right so that there is no leakage and possible carb0on monoxide poisoning.

Which of the following is a primary fuel? (A) Blast furnace coke (B) Gasoline (C) Natural gas (D) Wood charcoal

Description : Which of the following is a primary fuel? (A) Blast furnace coke (B) Gasoline (C) Natural gas (D) Wood charcoal

Last Answer : (C) Natural gas

Mark correct option a) The expression “postage” means the duty chargeable for the transmission by post of postal articles b) The expression “postage stamps” means any stamp provided by the [Central Government] for denoting postage or other fees or sums payable in respect of postal articles under this Act c) The expression “post office” includes every house, building, room, carriage or place used for the purposes of the Post Office. d) All the above

Description : Mark correct option a) The expression postage means the duty chargeable for the transmission by post of postal articles b) The expression postage stamps means any stamp provided by the [Central Government] ... room, carriage or place used for the purposes of the Post Office. d) All the above

Last Answer : d) All the above

The local loop of the telephone system is understood to be A. a single piece of wire connecting the subscriber’s telephone set to another telephone set in an adjacent room B. a two-wire or four-wire communication circuit between the customer’s premise and central office C. a four-wire circuit connecting a facsimile machine to a computer D. a group of wires connecting a telephone set to a modem

Description : The local loop of the telephone system is understood to be A. a single piece of wire connecting the subscriber's telephone set to another telephone set in an adjacent room B. a two-wire or four- ... a facsimile machine to a computer D. a group of wires connecting a telephone set to a modem

Last Answer : B. a two-wire or four-wire communication circuit between the customer’s premise and central office

Carbonisation of coal consists of  A. drying and crushing the coal to a fine powder  B. moulding the finely ground coal under pressure with or without a binding material  C. heating the wood with a limited supply of air to temperature not less than 280°C  D. none of the above

Description : Carbonisation of coal consists of  A. drying and crushing the coal to a fine powder  B. moulding the finely ground coal under pressure with or without a binding material  C. heating the wood with a limited supply of air to temperature not less than 280°C  D. none of the above

Last Answer : Answer: D

What type of heat transfer takes place when a furnace heats up an entire room?

Description : What type of heat transfer takes place when a furnace heats up an entire room?

Last Answer : So in order for a furnace to heat up in the first place, there needs to be a fuel or substance that heats or absorbs heat. This can be gas, coal, or charcoal. In addition, the fuel or coal, the fire ... begin to spread. Causing heat, or humid to form in the room you are in.HOPE THIS HELPED:)))))

Which of the following is not increased by using preheated combustion air in place of ordinary air at room temperature? (A) Calorific value of the fuel (B) Flame temperature achieved (C) Speed of combustion of fuel (D) Heat transfer rate to the stock in the furnace

Description : Which of the following is not increased by using preheated combustion air in place of ordinary air at room temperature? (A) Calorific value of the fuel (B) Flame temperature achieved (C) Speed of combustion of fuel (D) Heat transfer rate to the stock in the furnace

Last Answer : (A) Calorific value of the fuel

One face of a furnace wall is at 1030°C and the other face is exposed to room temperature (30°C). If the thermal conductivity of furnace wall is 3 W. m-1. k-1 and the wall thickness is 0.3 m, the maximum heat loss (in W/m) is (A) 100 (B) 900 (C) 9000 (D) 10000

Description : One face of a furnace wall is at 1030°C and the other face is exposed to room temperature (30°C). If the thermal conductivity of furnace wall is 3 W. m-1. k-1 and the wall thickness is 0.3 m, the maximum heat loss (in W/m) is (A) 100 (B) 900 (C) 9000 (D) 10000

Last Answer : (D) 10000

Will wood or coal heating be cheaper?

Description : What pays off?

Last Answer : It depends a bit on what you heat and what object you heat ...: o But wood is usually cheaper, especially if you at least partially process it yourself.

Which one of the following is a physical change? (a) Burning of coal (b) Burning of wood (c) Heating of a platinum crucible (d) Heating of potassium chlorate

Description : Which one of the following is a physical change? (a) Burning of coal (b) Burning of wood (c) Heating of a platinum crucible (d) Heating of potassium chlorate

Last Answer : Ans:(c)

Coke is made by heating coal in the absence of air at: A. 700 °C B. 1300 °C C. 900 °C D. 1700 °C ANSWER: Why are soft drinks made with chilled water rather than water at room temperature? A. Ingredients dissolve better in chilled water B. Chilled water enhances the taste C. Chilled water attracts more carbon dioxide D. Chilled water is more hygienic

Description : Coke is made by heating coal in the absence of air at: A. 700 °C B. 1300 °C C. 900 °C D. 1700 °C ANSWER: Why are soft drinks made with chilled water rather than water at room ... B. Chilled water enhances the taste C. Chilled water attracts more carbon dioxide D. Chilled water is more hygienic

Last Answer : ANSWER: C

Is radiant heating more environmentally friendly than central heating?

Description : Is radiant heating more environmentally friendly than central heating?

Last Answer : Yes Radiant heating is more environmentally friendly than central heating. You will find that out after you start saving money on radiant heating. Your Welcome.

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

Is Microsoft Dynamics 365 Business Central deployment easy and cost-effective?

Description : Is Microsoft Dynamics 365 Business Central deployment easy and cost-effective?

Last Answer : Microsoft Dynamics 365 Business Central helps large and mid-sized organization excel their productivity in the workspace and accelerate growth at a higher speed. But making a correct choice for the ... and the consultancy services are also advanced. They have a strong base in technology and fol