With central heating can the heat be controlled in each room?

With central heating can the heat be controlled in each room?
by

1 Answer

Answer :

You cannot control heating in individual rooms. Central heating provides heating to various rooms in a house or building from one location.
by

Related questions

Is central heating in a four room house more cost effective than a wood furnace?

Description : Is central heating in a four room house more cost effective than a wood furnace?

Last Answer : Wood is fairly expensive. It can be if you can cut your own wood though.

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

Pasteurisation of milk means (A) Removal of fatty and albuminous substance from it (B) Killing of organisms present in it by heating it at controlled temperature without changing its natural characteristics (C) Inhibiting the growth of micro-organisms without killing them (D) None of these

Description : Pasteurisation of milk means (A) Removal of fatty and albuminous substance from it (B) Killing of organisms present in it by heating it at controlled temperature without changing its natural characteristics (C) Inhibiting the growth of micro-organisms without killing them (D) None of these

Last Answer : (B) Killing of organisms present in it by heating it at controlled temperature without changing its natural characteristics

The process of controlled heating, called__________ was used to keep **** from spoiling. a. curdling b. fermentation c. pasteurization d. variolation

Description : The process of controlled heating, called__________ was used to keep wine from spoiling. a. curdling b. fermentation c. pasteurization d. variolation

Last Answer : b. fermentation

The temperature of resistance furnaces can be controlled by changing the: (A) applied voltage (B) number of heating elements (C) circuit configuration (D) All of the above

Description : The temperature of resistance furnaces can be controlled by changing the: (A) applied voltage (B) number of heating elements (C) circuit configuration (D) All of the above

Last Answer : Ans: D Temperature of resistance furnaces can be controlled by changing either applied voltage or by number of heating elements or by circuit configuration.

Pick out the wrong statement. (A) In case of heat transfer by purely forced convection, GR /Re 2 ≤ 1 (B) The equivalent diameter of heat transfer for a duct of square cross￾section (having each side as 'x') is equal to 4x (C) Distillation process is not the same as evaporation (D) The effectiveness of nucleate boiling depends basically on the ease with which the bubbles are formed and detached from the heating surface

Description : Pick out the wrong statement. (A) In case of heat transfer by purely forced convection, GR /Re 2 ≤ 1 (B) The equivalent diameter of heat transfer for a duct of ... nucleate boiling depends basically on the ease with which the bubbles are formed and detached from the heating surface

Last Answer : (B) The equivalent diameter of heat transfer for a duct of square cross￾section (having each side as 'x') is equal to 4x

A ______ is a specialized heat exchanger in which air and water are brought into direct contact with each otherin order to reduce the water's temperature. a. Cooling tower b. Heating tower c. Both d. All are wrong

Description : A ______ is a specialized heat exchanger in which air and water are brought into direct contact with each otherin order to reduce the water's temperature. a. Cooling tower b. Heating tower c. Both d. All are wrong

Last Answer : cooling tower

Vessel pitch can be controlled by either the 'bridge or engine room thrust lever' shown in the illustration; but only with one engine on the line whether in 'cruise or maneuver' mode. The cause is most likely a faulty relay _____________. EL-0095 A. #1 B. #2 C. #3 D. #4

Description : Vessel pitch can be controlled by either the 'bridge or engine room thrust lever' shown in the illustration; but only with one engine on the line whether in 'cruise or maneuver' mode. The cause is most likely a faulty relay _____________. EL-0095 A. #1 B. #2 C. #3 D. #4

Last Answer : Answer: D

which country controlled the majority of territory in central america in 1700? -General Knowledge

Description : which country controlled the majority of territory in central america in 1700? -General Knowledge

Last Answer : Spain controlled the majority of territory in Central America in 1700.

Appropriate government means in relation to a public authority which is established, constituted, owned, controlled or substantially financed by funds provided directly or indirectly by a) The Central government b) The State government c) Union territory administration d) All the above

Description : Appropriate government means in relation to a public authority which is  established, constituted, owned, controlled or substantially financed by funds provided  directly or indirectly by a) The Central government b) The State government c) Union territory administration d) All the above

Last Answer : d) All the above

An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. It resistance at room temperature `(27.0

Description : An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. It resistance at room temperature `(27.0

Last Answer : An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. ... range involved , `1.70xx10^-4C^-1`

Coke is made by heating coal in the absence of air at: A. 700 °C B. 1300 °C C. 900 °C D. 1700 °C ANSWER: Why are soft drinks made with chilled water rather than water at room temperature? A. Ingredients dissolve better in chilled water B. Chilled water enhances the taste C. Chilled water attracts more carbon dioxide D. Chilled water is more hygienic

Description : Coke is made by heating coal in the absence of air at: A. 700 °C B. 1300 °C C. 900 °C D. 1700 °C ANSWER: Why are soft drinks made with chilled water rather than water at room ... B. Chilled water enhances the taste C. Chilled water attracts more carbon dioxide D. Chilled water is more hygienic

Last Answer : ANSWER: C

Heating the Hypo-eutectoid steels to 30°C above the upper critical temperature line, soaking at that temperature and then cooling slowly to the room temperature to form a pearlite & ferrite structure is called (A) Tempering (B) Hardening (C) Annealing (D) Normalising

Description : Heating the Hypo-eutectoid steels to 30°C above the upper critical temperature line, soaking at that temperature and then cooling slowly to the room temperature to form a pearlite & ferrite structure is called (A) Tempering (B) Hardening (C) Annealing (D) Normalising

Last Answer : Option C

What is the best cost effective way to use central heating.

Description : What is the best cost effective way to use central heating.

Last Answer : no don’t close the doors. The air needs to recycle itself, so you need proper circulation. close vents in rooms you don’t use and use directional vents pointing down (winter months) in the rooms you do. One last thing, make sure you have a clean filter.

Are heated towel rails safe All of our electric towel rails are pre-filled with a water-based solution containing a mix of central heating preservatives. What is the best price of Towel Rail per Packet?

Description : Are heated towel rails safe All of our electric towel rails are pre-filled with a water-based solution containing a mix of central heating preservatives. What is the best price of Towel Rail per Packet?

Last Answer : Yes, our heated towel rails are safe. We have been manufacturing and selling Heated Towel Rails for nearly ten years and know what makes a great towel rail. If you are installing a heated ... will provide the correct heat output. Heated Towel Rails are now a common feature in modernized homes,

Can tenants in a municipal house request a disconnection from central heating?

Description : If the tenants of all apartments agree and are interested in disconnection from central heating - where to request a change in the heating of the apartment, how to proceed? In the case of disconnection of an ... have to be paid for common areas (how many%, from the basic or consumer component)?

Last Answer : Of course you can ask for anything. The question is whether it will be complied with. In this case, it would be necessary to apply to the homeowner. How much would it cost and common areas could not be determined. It would be different for every company and every apartment.

If central heating system cannot be installed as per the clients original specification what should a plumber do?

Description : If central heating system cannot be installed as per the clients original specification what should a plumber do?

Last Answer : advise their immeddiate supervisor or employer about the problem, obtain the clients verbal agreemenet to carry out the alterations, obtain the clients written agreement to carry out the alterations, proceed when the clients quantity surveoyor issues a variationorder

If central heating system cannot be installed as per the clients original specification what should a plumber do?

Description : If central heating system cannot be installed as per the clients original specification what should a plumber do?

Last Answer : advise their immeddiate supervisor or employer about the problem, obtain the clients verbal agreemenet to carry out the alterations, obtain the clients written agreement to carry out the alterations, proceed when the clients quantity surveoyor issues a variationorder

Is radiant heating more environmentally friendly than central heating?

Description : Is radiant heating more environmentally friendly than central heating?

Last Answer : Yes Radiant heating is more environmentally friendly than central heating. You will find that out after you start saving money on radiant heating. Your Welcome.

Are there any systems that provide central heating and cooling in one location?

Description : Are there any systems that provide central heating and cooling in one location?

Last Answer : Yes. HVAC systems offer both heating and cooling.

What is the energy consumption comparison between space heaters and central heating?

Description : What is the energy consumption comparison between space heaters and central heating?

Last Answer : Space heaters are inherently inefficient and should only be used in small applications where a bigger system is either unnecessary or unnecessarily expensive.

How much does a heating and central air conditioning system, when you start from scratch?

Description : How much does a heating and central air conditioning system, when you start from scratch?

Last Answer : From what I know they are cheap to purchase, but you need to take into account you will be paying for them on a monthly basis. Which means if you run your air all the time you will be ... run out air in California straight during the summer it's pretty pricey, but this is also California pricing.

If a central heating system cannot be installed as per the clients original specifications what should plumber do?

Description : If a central heating system cannot be installed as per the clients original specifications what should plumber do?

Last Answer : advise their immeddiate supervisor or employer about the problem , obtain the clients verbal agreemenet to carry out the alterations , obtain the clients written agreement to carry out the alterations , proceed when the clients quantity surveoyor issues a variation order

Indian monsoon is marked by seasonal shift caused by: [Teachers' Exam 1994] (a) differential heating of land and sea (b) cold winds of Central Asia (c) great uniformity of temperature (d) None of these

Description : Indian monsoon is marked by seasonal shift caused by: [Teachers' Exam 1994] (a) differential heating of land and sea (b) cold winds of Central Asia (c) great uniformity of temperature (d) None of these

Last Answer : Ans: (a)

Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low interfacial tension (C) When Henry's law constant is very small, then the mass transfer rate is controlled by the gas film resistance (D) Taylor-Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Description : Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low ... Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Last Answer : (A) Mechanical agitation is required, if the system has low interfacial tension

Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation (B) Film co-efficient for vaporisation decreases as a result of vapor binding (C) In industrial practice, sub-cooling of condensate is required, when thecondensate is a volatile liquid and is to be transferred for storage(D) Overall heat transfer co-efficient in a heat exchanger is controlled by thevalue of the film co-efficient, which is higher

Description : Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation ( ... in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Last Answer : (D) Overall heat transfer co-efficient in a heat exchanger is controlled by the value of the film co-efficient, which is higher

In a muffle furnace, the muffle (A) Retards the heat transfer (B) Assists in temperature equalisation in the charge (C) Permits the use of controlled atmosphere for the protection of stock (D) All (A), (B) and (C)

Description : In a muffle furnace, the muffle (A) Retards the heat transfer (B) Assists in temperature equalisation in the charge (C) Permits the use of controlled atmosphere for the protection of stock (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following interhalogens exist at room temperature and have central atom hybridization `sp^3d^2`. (a) `ClF_3` (b) `ClF_5` (C) `BrCl_3` (d)

Description : Which of the following interhalogens exist at room temperature and have central atom hybridization `sp^3d^2`. (a) `ClF_3` (b) `ClF_5` (C) `BrCl_3` (d)

Last Answer : Which of the following interhalogens exist at room temperature and have central atom hybridization `sp^3d^2`. (a ... `lBr_5 `(j) `BrF_3` (k) `ClBr_5`

The local loop of the telephone system is understood to be A. a single piece of wire connecting the subscriber’s telephone set to another telephone set in an adjacent room B. a two-wire or four-wire communication circuit between the customer’s premise and central office C. a four-wire circuit connecting a facsimile machine to a computer D. a group of wires connecting a telephone set to a modem

Description : The local loop of the telephone system is understood to be A. a single piece of wire connecting the subscriber's telephone set to another telephone set in an adjacent room B. a two-wire or four- ... a facsimile machine to a computer D. a group of wires connecting a telephone set to a modem

Last Answer : B. a two-wire or four-wire communication circuit between the customer’s premise and central office

Mark correct option a) The expression “postage” means the duty chargeable for the transmission by post of postal articles b) The expression “postage stamps” means any stamp provided by the [Central Government] for denoting postage or other fees or sums payable in respect of postal articles under this Act c) The expression “post office” includes every house, building, room, carriage or place used for the purposes of the Post Office. d) All the above

Description : Mark correct option a) The expression postage means the duty chargeable for the transmission by post of postal articles b) The expression postage stamps means any stamp provided by the [Central Government] ... room, carriage or place used for the purposes of the Post Office. d) All the above

Last Answer : d) All the above

Heating with heat from a deep well, do you have experience?

Description : Hello, we are starting the reconstruction of the house and we are still looking for the best way to heat. Does anyone have experience with a ground-to-water heat pump? Is the initial investment worthwhile? Isn't it noisy? Doesn't it cause any vibrations, for example? Thank you.

Last Answer : I don't have a personal. The neighbor has it, combined with solar panels and can not praise it. Although the initial investment is relatively large, they claim that the return will be about 5 ... year as it consumes a year. The advantage is that it sells electricity more expensive than it buys.

Ammonium salts decompose quite readily on heating : (i) Ammonium salt of weak oxidizing anion (e.g. `Cl^(-), CO_(3)^(2-), SO_(4)^(2-)`) `overset("heat

Description : Ammonium salts decompose quite readily on heating : (i) Ammonium salt of weak oxidizing anion (e.g. `Cl^(-), CO_(3)^(2-), SO_(4)^(2-)`) `overset("heat

Last Answer : Ammonium salts decompose quite readily on heating : (i) Ammonium salt of weak oxidizing anion (e.g. `Cl^(-), CO_(3) ... N_(2)` D. `NO, NH_(3), N_(2)O`

Ammonium salts decompose quite readily on heating : (i) Ammonium salt of weak oxidizing anion (e.g. `Cl^(-), CO_(3)^(2-), SO_(4)^(2-)`) `overset("heat

Description : Ammonium salts decompose quite readily on heating : (i) Ammonium salt of weak oxidizing anion (e.g. `Cl^(-), CO_(3)^(2-), SO_(4)^(2-)`) `overset("heat

Last Answer : Ammonium salts decompose quite readily on heating : (i) Ammonium salt of weak oxidizing anion (e.g. `Cl^(-), CO_(3) ... N_(2)` D. `NO, NH_(3), N_(2)O`

what mode of heat transfer explains why heating vents are best placed near the floor?

Description : what mode of heat transfer explains why heating vents are best placed near the floor?

Last Answer : radiation

When, H1 = Total heat of air entering the coil (heating or cooling) H2 = Total heat of air leaving the coil (heating or cooling) H3 = Total heat of air at the end of the process (humidification or dehumidification) then, the sensible heat factor (H2 – H1) / (H3 – H1) represents the process of A. cooling and humidification B. cooling and dehumidification C. heating and humidification D. heating and dehumidification

Description : When, H1 = Total heat of air entering the coil (heating or cooling) H2 = Total heat of air leaving the coil (heating or cooling) H3 = Total heat of air at the end of ... A. cooling and humidification B. cooling and dehumidification C. heating and humidification D. heating and dehumidification

Last Answer : ANSWER : C

All heat engines utilize a. lower heating value of oil b. higher heating value of oil c. net calorific value of oil d. calorific value of fuel

Description : All heat engines utilize a. lower heating value of oil b. higher heating value of oil c. net calorific value of oil d. calorific value of fuel

Last Answer : ANSWER a. lower heating value of oil

A pyrex tumbler does not crack when hot water is poured into it because pyrex (a) is a strong material (b) does not expand much on heating (c) is a good conductor of heat (d) expands equally from inside and outside

Description : A pyrex tumbler does not crack when hot water is poured into it because pyrex (a) is a strong material (b) does not expand much on heating (c) is a good conductor of heat (d) expands equally from inside and outside

Last Answer : Ans:(b)

The characteristic invalid for heat radiation is that it travels – (1) in a straight line (2) in all directions (3) with the speed of light (4) heating the medium through which it passes

Description : The characteristic invalid for heat radiation is that it travels – (1) in a straight line (2) in all directions (3) with the speed of light (4) heating the medium through which it passes

Last Answer : (3) with the speed of light Explanation: Heat is a form of energy. An important property of heat is that it flows from a body at higher temperature to another body at lower temperature.

In heating frozen foods in sealed pouches in microwaves, why do you first poke holes in the pouch? (1) To prevent the steam pres-sure from bursting open the pouch (2) To allow the heat to get into the food through the hole (3) To allow the microwaves to get into the food through the holes (4) To allow the aroma of the food to come out through the holes

Description : In heating frozen foods in sealed pouches in microwaves, why do you first poke holes in the pouch? (1) To prevent the steam pres-sure from bursting open the pouch (2) To allow the heat to get into ... into the food through the holes (4) To allow the aroma of the food to come out through the holes

Last Answer : (1) To prevent the steam pres-sure from bursting open the pouch Explanation: Anything in a tight skin or shell can explode in a microwave because the water inside can expand and burst through. It ... of shells and holes should be poked in the plastic wrap or sealed pouches of frozen packaged foods.

Why is the Earth's core hot? What caused it to heat up? Is it still heating, or now cooling?

Description : Why is the Earth's core hot? What caused it to heat up? Is it still heating, or now cooling?

Last Answer : Scientists estimate that temperature at the Earth's core is about 5538{+0}C. Much of the heat inside the Earth today comes from elements that were present when the planet was first formed billions of years ... function of their half-life. Therefore, Earth's core is not heating up, it's cooling down.

Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to a very high temperature (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Description : Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to ... D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Last Answer : (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Rate of heat transfer by vaporisation from pools of water is affected by the (A) Nature of heating surface and distribution of bubbles (B) Surface tension of water (C) Viscosity of water (D) All (A), (B) and (C)

Description : Rate of heat transfer by vaporisation from pools of water is affected by the (A) Nature of heating surface and distribution of bubbles (B) Surface tension of water (C) Viscosity of water (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A measure of the extent to which viscous heating is important relative to the heat flow resulting from the impressed temperature difference is represented by the __________ number. (A) Condensation (B) Grashoff (C) Stanton (D) Brinkman

Description : A measure of the extent to which viscous heating is important relative to the heat flow resulting from the impressed temperature difference is represented by the __________ number. (A) Condensation (B) Grashoff (C) Stanton (D) Brinkman

Last Answer : (D) Brinkman

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

Analogy between mass and heat transfer is not applicable in case of (A) Same velocity profile or equal eddy diffusivities (B) Thermal or pressure mass diffusion (C) Viscous heating or chemical reaction (D) Both (B) and (C)

Description : Analogy between mass and heat transfer is not applicable in case of (A) Same velocity profile or equal eddy diffusivities (B) Thermal or pressure mass diffusion (C) Viscous heating or chemical reaction (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

The atmosphere near the earth’s surface is “heated from below.” Which of the following does not significantly contribute to this heating -----------? A. Conduction of heat upward from a hot surface B. Convection from a hot surface C. Absorption of infrared energy that has been radiated from the surface D. Heat energy from the earth’s interior (Answer)

Description : The atmosphere near the earth's surface is heated from below. Which of the following does not significantly contribute to this heating -----------? A. Conduction of heat upward from a ... infrared energy that has been radiated from the surface D. Heat energy from the earth's interior (Answer)

Last Answer : D. Heat energy from the earth’s interior (Answer)

In regenerative air preheater (as practised in heating of coke ovens), the heat is transferred (A) Through a metallic wall (B) By direct contact of hot flue gas with air (C) By heating an intermediate material (like chequor bricks) and then heating the air from this hot material (D) None of these

Description : In regenerative air preheater (as practised in heating of coke ovens), the heat is transferred (A) Through a metallic wall (B) By direct contact of hot flue gas with air (C) By ... material (like chequor bricks) and then heating the air from this hot material (D) None of these

Last Answer : (C) By heating an intermediate material (like chequor bricks) and then heating the air from this hot material

Heat exchangers operating, when the asymptotic range is reached, (A) Provide very large heat transfer co-efficient (B) Results in making part of the heating surface inactive (C) Results in abruptly increased velocity (D) None of these

Description : Heat exchangers operating, when the asymptotic range is reached, (A) Provide very large heat transfer co-efficient (B) Results in making part of the heating surface inactive (C) Results in abruptly increased velocity (D) None of these

Last Answer : (B) Results in making part of the heating surface inactive