How do you remove rivets?

How do you remove rivets?
by

1 Answer

Answer :

Find a drill bit a little smaller than the rivets. Drill the rivet out. It should come right out as soon as it gets through the middle of the rivet. The original hole is left as it was. This is how I take gutters off houses and put them back together. You can put the same sized rivets back in the holes if you have a rivet gun and rivets
by

Related questions

Where can I find these briolette jewel rivets?

Description : Where can I find these briolette jewel rivets?

Last Answer : Have you tried Rio Gems/Findings?

How many rivets in the golden gate bridge?

Description : How many rivets in the golden gate bridge?

Last Answer : 600,000 in each of the two towers

Addition of 2% nickel in steel makes it suitable for making (A) Electronic valves (B) Boiler plates, rivets etc. (C) Turbine blades (D) Connecting rod

Description : Addition of 2% nickel in steel makes it suitable for making (A) Electronic valves (B) Boiler plates, rivets etc. (C) Turbine blades (D) Connecting rod

Last Answer : (B) Boiler plates, rivets etc.

The distance between the centres of adjacent rivets in the same row, is called (A) Pitch (B) Lap (C) Gauge (D) Staggered pitch

Description : The distance between the centres of adjacent rivets in the same row, is called (A) Pitch (B) Lap (C) Gauge (D) Staggered pitch

Last Answer : (A) Pitch

When two plates butt together and are riveted with two cover plates with two rows of rivets, the joint is known as (A) Lap joint (B) Butt joint (C) Single riveted single cover butt joint (D) Double riveted double cover butt joint

Description : When two plates butt together and are riveted with two cover plates with two rows of rivets, the joint is known as (A) Lap joint (B) Butt joint (C) Single riveted single cover butt joint (D) Double riveted double cover butt joint

Last Answer : (D) Double riveted double cover butt joint

The minimum number of rivets for the connection of a gusset plate, is (A) 1 (B) 2 (C) 3 (D) 4

Description : The minimum number of rivets for the connection of a gusset plate, is (A) 1 (B) 2 (C) 3 (D) 4

Last Answer : (B) 2

Failure of riveted joints is due to (A) Tearing of the plates between the rivet hole and the edge of the plate (B) Tearing of plates between rivets (C) Shearing of rivets (D) All the above

Description : Failure of riveted joints is due to  (A) Tearing of the plates between the rivet hole and the edge of the plate  (B) Tearing of plates between rivets  (C) Shearing of rivets  (D) All the above 

Last Answer : (D) All the above 

If the rivets in adjacent rows are staggered and outermost row has only one rivet, the arrangement of the rivets, is called (A) Chain riveting (B) Zig-zag riveting (C) Diamond riveting (D) None of these

Description : If the rivets in adjacent rows are staggered and outermost row has only one rivet, the arrangement of the rivets, is called (A) Chain riveting (B) Zig-zag riveting (C) Diamond riveting (D) None of these

Last Answer : (C) Diamond riveting

Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) Mandrels, twist drills, small lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Description : Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) ... lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Last Answer : (A) Small punches, broaches reamers and springs

When the distance between centers of two adjacent rivets connecting the members subjected to either compression or tension exceeds the maximum pitch, then the additional rivets which are not subjected to the calculated stresses are known as (a) Packing rivets (b) Long-grip rivets (c) Tacking rivets (d) Auxiliary rivets

Description : When the distance between centers of two adjacent rivets connecting the members subjected to either compression or tension exceeds the maximum pitch, then the additional rivets which are not subjected to the ... (a) Packing rivets (b) Long-grip rivets (c) Tacking rivets (d) Auxiliary rivets

Last Answer : (c) Tacking rivets

In flange splices when the number of hammer and hand loose rivets is 30% or more of the total rivets on any side of the splice location, a) Need no be renewed b) wait for 100% loose rivets c) all the rivets should be renewed.* d) None of the above

Description : In flange splices when the number of hammer and hand loose rivets is 30% or more of the total rivets on any side of the splice location, a) Need no be renewed b) wait for 100% loose rivets c) all the rivets should be renewed.* d) None of the above

Last Answer : c) all the rivets should be renewed.*

Renewal of slack rivets should be taken up in steel girder bridges: a) All rivets which are hand loose or which have lost 50% of their head by corrosion. b) All hammer loose rivets where corrosion has set in between the head and the plate. c) In end stiffeners when the percentage of hammer loose rivets is >30% d) All the above*

Description : Renewal of slack rivets should be taken up in steel girder bridges: a) All rivets which are hand loose or which have lost 50% of their head by corrosion. b) All hammer loose rivets where corrosion has set ... . c) In end stiffeners when the percentage of hammer loose rivets is >30% d) All the above*

Last Answer : d) All the above*

The minimum pitch of rivets of diameter ‘d’ in steel plates shall be a) 2 x d b) 3 x d c) 1.75 x d d) 2.5 x d*

Description : The minimum pitch of rivets of diameter ‘d’ in steel plates shall be a) 2 x d b) 3 x d c) 1.75 x d d) 2.5 x d*

Last Answer : d) 2.5 x d*

The minimum edge distance for rivets of diameter ‘d’ in steel plates shall be a) 2 x d b) 3 x d c) 1.5 x d* d) 2.5 x d

Description : The minimum edge distance for rivets of diameter ‘d’ in steel plates shall be a) 2 x d b) 3 x d c) 1.5 x d* d) 2.5 x d

Last Answer : c) 1.5 x d*

Is it legal to remove your own license plates if they're out of date and your car's going to get towed because of it?

Description : Is it legal to remove your own license plates if they're out of date and your car's going to get towed because of it?

Last Answer : Do you want the car to get towed and empounded? Why don’t you sell it for scrap? Yes, you can and should keep the license plates. You need to notify the DMV, so, if it is applicable in your area, you won’t continue being charged personal property taxes.

Can I remove a car battery when it's raining?

Description : Can I remove a car battery when it's raining?

Last Answer : Undo the black one first and you will be fine.

Can you remove rust from a car?

Description : Can you remove rust from a car?

Last Answer : Depends on the extent of the damage. Body panels can be replaced, but the chassis is whole other story. Both can be fixed if things haven't gone to far.

How do I remove a bumper sticker from my car?

Description : How do I remove a bumper sticker from my car?

Last Answer : I would probably use a solvent like Goo- Gone and slather it all over the sticker for ten min. trying to get it saturated at the edges. I would then use a razor blade or razor paint scraper to gently ... and will come off in small bits. This will make the job easier, but it might be a bit tedious.

How do you remove a bumper sticker from a car without taking the paint off?

Description : How do you remove a bumper sticker from a car without taking the paint off?

Last Answer : Hairdryer

How do I remove paint from a car?

Description : How do I remove paint from a car?

Last Answer : answer:This will take some work. The transfered paint will have to be removed by careful sanding with extremely fine sandpaper , about 2000 grit (your auto parts store may have this). This sanding should be ... to make this easier, but it can be done by vigorous hand rubbing using an old t-shirt.

Am I worrying too much or is my dad just ignorant?

Description : Am I worrying too much or is my dad just ignorant?

Last Answer : My check engine light it flashing. Its not just a solid yellow light

How do they do smog tests on cars?

Description : How do they do smog tests on cars?

Last Answer : Smog as in a combination of mist and fog?

Do any Jellies know anyone at Hyundai Customer Care?

Description : Do any Jellies know anyone at Hyundai Customer Care?

Last Answer : I don’t, but you could try your state insurance commissioner.

Car-savvy jellies: what's the optimal $ cutoff for buying a used car?

Description : Car-savvy jellies: what's the optimal $ cutoff for buying a used car?

Last Answer : I have bought a number of used cars. I would never buy any car that I knew needed work. I always buy a Toyota or Honda. They run forever.

Would it help if all cars have the ability to communicate with nearby cars?

Description : Would it help if all cars have the ability to communicate with nearby cars?

Last Answer : It sounds like a great idea, hypothetically, but would it take as much as six seconds before it started to be abused? I’d vote a firm no against any such addition to motor vehicle technology.

How soon after an photo radar speeding ticket is registered before one can get a second ticket?

Description : How soon after an photo radar speeding ticket is registered before one can get a second ticket?

Last Answer : Just drive really, really fast, and try to make it in 4:55.

When stranded in a car on the highway, in the winter, can you run out of gas idling?

Description : When stranded in a car on the highway, in the winter, can you run out of gas idling?

Last Answer : Yes you can, sorry to say. Rule is don’t go anywhere in the winter with less than a half a tank of gas. Have blankets and snacks, maybe a couple bottles of water too!

Cheapest option for moving my car to a diff. State...

Description : Cheapest option for moving my car to a diff. State...

Last Answer : You could drive it.

The car has not gone for a long time, what should I check before rolling?

Description : The car has not gone for a long time, what should I check before rolling?

Last Answer : I would have the tire pressure checked, the oil, and battery charge. Also make sure you have gas. Welcome to Fluther!

How can I look up a used car by VIN?

Description : How can I look up a used car by VIN?

Last Answer : CarMax charges $19.99 for a vehicle history. If you are buying a car though Carmax, they give you a free report, but if you are just looking for the history of a specific car, you have to pay.

What was the first automobile to have a key lock?

Description : What was the first automobile to have a key lock?

Last Answer : I just gave you a “Great Question” upvote. I love your question, have no idea about the answer, and look forward to learning.

What is the best auto insurance company?

Description : What is the best auto insurance company?

Last Answer : No such thing as “best” – it depends on your needs, including: - your driving record – vehicle you drive – how many accidents have you been in? – number of miles you drive to and from work – your age and gender – your work record and so on. There is no one answer to your question

Why don't we have wheels that can go at 90 degree angles?

Description : Why don't we have wheels that can go at 90 degree angles?

Last Answer : Don't forget this experimental fifth wheel method installed on a 1951 Cadillac. It used the spare tire to do the job. And while we're on the subject jeck out these two designs. British ... while driving at speed would be disastrous. The negatives far outweigh the small benefit the system offers.

Any car experts that can help me figure this out? -- What is this thing that broke in my car?

Description : Any car experts that can help me figure this out? -- What is this thing that broke in my car?

Last Answer : Just a thought…If nobody here can adequately name your part, could you take the part to a BMW dealer and ask a mechanic what the part is? They might be able to tell you right away.

I think a business card slid down the side of my car window and is stuck down there, can I get it out?

Description : I think a business card slid down the side of my car window and is stuck down there, can I get it out?

Last Answer : Doors come apart to allow working on the window and lock mechanisms. Basically all the soft parts on the interior can be peeled open. If you don’t want to do that, I would forget it. Or have a pro do it. Without experience and the right tools, it’s hard to put it back together well.

Where is a good place to buy a car?

Description : Where is a good place to buy a car?

Last Answer : I’ve heard good things about Carmax.

Can one make a profit from extracting palladium and platinum from automobiles in junk yards?

Description : Can one make a profit from extracting palladium and platinum from automobiles in junk yards?

Last Answer : It’s the recyclers who do that and make money. You couldn’t make enough trying to do it yourself.

Did you ever own a vehicle in which you would love to have a mint-condition 'Like New' one today?

Description : Did you ever own a vehicle in which you would love to have a mint-condition 'Like New' one today?

Last Answer : 1958 Oldsmobile 98 four door hardtop. Like this one but three tone green and white

When did the car become the best prize in a game show?

Description : When did the car become the best prize in a game show?

Last Answer : Before what? It was a typical biggest prize in game shows in the 70’s (unless they were giving away a boat or something). Some of the earlier shows it might be an appliance made by the show’s sponsor.

What will cars look like in 10 years?

Description : What will cars look like in 10 years?

Last Answer : It seems likely that the self-driving technology will progress and be more readily available - unless something catastrophic happens (family of four die as autonomous car careens into hospital and kills an ... emergency room full of patients-level catastrophic). Then that would be the end of that.

How durable are electric car power connectors?

Description : How durable are electric car power connectors?

Last Answer : Ours is a gigantic plug, nearly as bug as my hand, with a large plastic housing to protect it. It is very heavy, and the cord connecting to the car is so big around it takes both my hands to wrap around it. It shows zero signs of wear after several years of use.

What was your favourite vehicle that you owned?

Description : What was your favourite vehicle that you owned?

Last Answer : Tesla Model 3. It’ll be 3 years this spring and I still get excited every time I get behind the wheel.

If one can run, or bike, faster than the speed limit is it still a crime?

Description : If one can run, or bike, faster than the speed limit is it still a crime?

Last Answer : In the UK the speed limit applies to motor vehicles only however you can be charged with “wanton and furious cycling” if you are riding in such a manner that could endanger others.

How long does a car last when idling with a full tank of gas?

Description : How long does a car last when idling with a full tank of gas?

Last Answer : A rule of thumb we used was: a passenger car burns about 0.5 gallons of fuel per hour while idling. If you have a 12 gallon tank you can figure it will idle for 24 hours. The range is large ... if you have air conditioning running your flow rate will be double so your tank will be empty in 12 hours.

Is the hand on a pedestrian traffic signal sometimes doing anything like flashing? See detail.

Description : Is the hand on a pedestrian traffic signal sometimes doing anything like flashing? See detail.

Last Answer : The flashing hand means you are running out of time to clear the intersection if walking. It is the pedestrian’s “yellow light”.

First time buying a vehicle, can someone help? (need advice)

Description : First time buying a vehicle, can someone help? (need advice)

Last Answer : Do a lot of research online regarding pricing and financing. But, first decide what type of car is best for you.

Is this a good idea for a product?

Description : Is this a good idea for a product?

Last Answer : Not very aerodynamic. Doesn’t seem as if it would be easy to reach while sitting in the car.

How resilient were early cars against hail storms?

Description : How resilient were early cars against hail storms?

Last Answer : I learned to drive on a 1954 Chevy BelAir. It was a tank. It had heavy steel as a body, not thin steel, aluminum or fiberglass. Hail might put a scratch on the paint, but the metal itself would have been difficult to dent.

What is your opinion regarding the speed limit drivers should do in the left lane of a highway?

Description : What is your opinion regarding the speed limit drivers should do in the left lane of a highway?

Last Answer : If you have three lanes, the right lane should be for people who want to drive UNDER the speed limit, or for people who are about to exit, or for those entering. The middle lane should be for ... speed you think you can get away with, but no tailgating and no blocking others, holding up traffic.

Are smart cars able to react properly when in an accident?

Description : Are smart cars able to react properly when in an accident?

Last Answer : Smart cars aren’t sentient, only very technological in a dumb sort of way.