The distance between the centres of adjacent rivets in the same row, is called (A) Pitch (B) Lap (C) Gauge (D) Staggered pitch

The distance between the centres of adjacent rivets in the same row, is called
(A) Pitch
(B) Lap
(C) Gauge
(D) Staggered pitch
by

1 Answer

Answer :

(A) Pitch
by

Related questions

If the rivets in adjacent rows are staggered and outermost row has only one rivet, the arrangement of the rivets, is called (A) Chain riveting (B) Zig-zag riveting (C) Diamond riveting (D) None of these

Description : If the rivets in adjacent rows are staggered and outermost row has only one rivet, the arrangement of the rivets, is called (A) Chain riveting (B) Zig-zag riveting (C) Diamond riveting (D) None of these

Last Answer : (C) Diamond riveting

When the distance between centers of two adjacent rivets connecting the members subjected to either compression or tension exceeds the maximum pitch, then the additional rivets which are not subjected to the calculated stresses are known as (a) Packing rivets (b) Long-grip rivets (c) Tacking rivets (d) Auxiliary rivets

Description : When the distance between centers of two adjacent rivets connecting the members subjected to either compression or tension exceeds the maximum pitch, then the additional rivets which are not subjected to the ... (a) Packing rivets (b) Long-grip rivets (c) Tacking rivets (d) Auxiliary rivets

Last Answer : (c) Tacking rivets

When two plates butt together and are riveted with two cover plates with two rows of rivets, the joint is known as (A) Lap joint (B) Butt joint (C) Single riveted single cover butt joint (D) Double riveted double cover butt joint

Description : When two plates butt together and are riveted with two cover plates with two rows of rivets, the joint is known as (A) Lap joint (B) Butt joint (C) Single riveted single cover butt joint (D) Double riveted double cover butt joint

Last Answer : (D) Double riveted double cover butt joint

The minimum pitch of rivets of diameter ‘d’ in steel plates shall be a) 2 x d b) 3 x d c) 1.75 x d d) 2.5 x d*

Description : The minimum pitch of rivets of diameter ‘d’ in steel plates shall be a) 2 x d b) 3 x d c) 1.75 x d d) 2.5 x d*

Last Answer : d) 2.5 x d*

In which condition the axial distance between two adjacent coils is called as pitch? a. Compressed condition b. Uncompressed condition c. Both a. and b. d. None of the above

Description : In which condition the axial distance between two adjacent coils is called as pitch? a. Compressed condition b. Uncompressed condition c. Both a. and b. d. None of the above

Last Answer : b. Uncompressed condition

The minimum edge distance for rivets of diameter ‘d’ in steel plates shall be a) 2 x d b) 3 x d c) 1.5 x d* d) 2.5 x d

Description : The minimum edge distance for rivets of diameter ‘d’ in steel plates shall be a) 2 x d b) 3 x d c) 1.5 x d* d) 2.5 x d

Last Answer : c) 1.5 x d*

A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and

Description : A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and front pitch adopted could be respectively

Last Answer : A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and front pitch adopted could be respectively 19,17

In the case of lap winding resultant pitch is?

Last Answer : In the case of lap winding resultant pitch is difference of front and back pitches.

In case of a 4-pole D.C. generator provided with a two layer lap winding with sixteen coils, the pole pitch will be?

Last Answer : In case of a 4-pole D.C. generator provided with a two layer lap winding with sixteen coils, the pole pitch will be 8.

The most economical lighting layout which is suitable for narrow roads is (A) Single side lighting (B) Staggered system (C) Central lighting system (D) None of the above

Description : The most economical lighting layout which is suitable for narrow roads is (A) Single side lighting (B) Staggered system (C) Central lighting system (D) None of the above

Last Answer : Answer: Option A

The width of the flange of a T-beam should be less than (A) One-third of the effective span of the T-beam (B) Distance between the centres of T-beam (C) Breadth of the rib plus twelve times the thickness of the slab (D) Least of the above

Description : The width of the flange of a T-beam should be less than (A) One-third of the effective span of the T-beam (B) Distance between the centres of T-beam (C) Breadth of the rib plus twelve times the thickness of the slab (D) Least of the above

Last Answer : Answer: Option D

The effective span of a simply supported slab, is (A) Distance between the centres of the bearings (B) Clear distance between the inner faces of the walls plus twice the thickness of the wall (C) Clear span plus effective depth of the slab (D) None of these

Description : The effective span of a simply supported slab, is (A) Distance between the centres of the bearings (B) Clear distance between the inner faces of the walls plus twice the thickness of the wall (C) Clear span plus effective depth of the slab (D) None of these

Last Answer : Answer: Option B

The minimum distance between the centres of bulb of diameter du, of a multi under reamed piles, is (A) du (B) 1.25 du (C) 1.5 du (D) 1.75 d

Description : The minimum distance between the centres of bulb of diameter du, of a multi under reamed piles, is (A) du (B) 1.25 du (C) 1.5 du (D) 1.75 du

Last Answer : Answer: Option C

The minimum number of rivets for the connection of a gusset plate, is (A) 1 (B) 2 (C) 3 (D) 4

Description : The minimum number of rivets for the connection of a gusset plate, is (A) 1 (B) 2 (C) 3 (D) 4

Last Answer : (B) 2

Failure of riveted joints is due to (A) Tearing of the plates between the rivet hole and the edge of the plate (B) Tearing of plates between rivets (C) Shearing of rivets (D) All the above

Description : Failure of riveted joints is due to  (A) Tearing of the plates between the rivet hole and the edge of the plate  (B) Tearing of plates between rivets  (C) Shearing of rivets  (D) All the above 

Last Answer : (D) All the above 

A, B, C and D are to be seated in a row. C and D cannot be on adjacent seat. Also, B cannot be at the third place. Which of the following must be false? (1) A is at the fourth place (2) A is at the third place (3) A is at the second pla

Description : A, B, C and D are to be seated in a row. C and D cannot be on adjacent seat. Also, B cannot be at the third place. Which of the following must be false? (1) A is at the fourth place (2) A is at the third place (3) A is at the second pla

Last Answer : (4) A is at the first place

What is the pitch of your laboratory screw gauge?

Description : What is the pitch of your laboratory screw gauge?

Last Answer : What is the answer ?

The constant vertical distance between two adjacent contours, is called (A) Horizontal interval (B) Horizontal equivalent (C) Vertical equivalent (D) Contour interval

Description : The constant vertical distance between two adjacent contours, is called (A) Horizontal interval (B) Horizontal equivalent (C) Vertical equivalent (D) Contour interval

Last Answer : (D) Contour interval

The breadth of the flange of a T-beam is (a) 1/3rd of the effective span of the T-beam (b) Twelve times the depth of slab plus breadth of rib. (c) Centre to centre distance between the adjacent beam. (d) Least of (a) , (b) or (c)

Description : The breadth of the flange of a T-beam is (a) 1/3rd of the effective span of the T-beam (b) Twelve times the depth of slab plus breadth of rib. (c) Centre to centre distance between the adjacent beam. (d) Least of (a) , (b) or (c)

Last Answer : (d) Least of (a) , (b) or (c)

A young girl, Violet by name, was visiting with a group of her schoolmates at a friend’s house. The air was filled with the noise of loud conversations, when an older woman called out for silence. She then asked one of the girls in attendance to remove something from a black bag she was holding. The older woman then announced, “Violet, you have the honor of being first!” Violet was then ushered to the center of the room where the older woman pushed a body part of an animal into Violet’s hand. Suddenly, everything went dark for the young girl. Violet began to feel dizzy, and felt someone’s hands on her. She then felt a slight push. As Violet staggered forward in the darkness, the loud chanting and shouting increased around her. Finally, Violet’s hand bumped into something which, when the da

Description : A young girl, Violet by name, was visiting with a group of her schoolmates at a friend's house. The air was filled with the noise of loud conversations, when an older woman called out for ... and shouting increased around her. Finally, Violet's hand bumped into something which, when the da -Riddles

Last Answer : Violet was at a birthday party, and was selected to be first in the Pin the Tail on the Donkey game they were playing. She was successful in pinning the tail just where it belonged. The body part of the animal was, of course, the donkey’s tail.

Would traffic flow better if rush hour was staggered from schools and businesses?

Description : Would traffic flow better if rush hour was staggered from schools and businesses?

Last Answer : How the heck would you do that? People who work have kids. As it is, it’s hard enough to get the kids to school, get to work, and get home at a reasonable hour.

The eclipsed and staggered conformation of ethane is due to -

Description : The eclipsed and staggered conformation of ethane is due to -

Last Answer : The eclipsed and staggered conformation of ethane is due to - A. Free rotation about C-C single bond ... rotation about C-C bond D. None of the above

An alternator will fail to produce line voltage as a result of _____________. A. a closed circuit breaker B. oxidized slip rings C. improperly staggered brushes D. exciter generator failure

Description : An alternator will fail to produce line voltage as a result of _____________. A. a closed circuit breaker B. oxidized slip rings C. improperly staggered brushes D. exciter generator failure

Last Answer : Answer: D

The direction of rotation of a DC propulsion motor can be changed by reversing the _____________. A. brush holder position B. polarity of the field poles C. brush staggered order D. motor interpole connections

Description : The direction of rotation of a DC propulsion motor can be changed by reversing the _____________. A. brush holder position B. polarity of the field poles C. brush staggered order D. motor interpole connections

Last Answer : Answer: B

Is it possible to isolate pure staggered ethane or pure eclipsed ethane at room temperature? Explain .

Description : Is it possible to isolate pure staggered ethane or pure eclipsed ethane at room temperature? Explain .

Last Answer : The energy differences between staggered and eclipsed forms of ethane is just 12.55 kj mol_1 which is easily met by collisions of the molecules at room temperature. Therefore, it is not possible to isolate either pure staggered or pure eclipsed ethane at room temperature.

The eclipsed and staggered forms of ethane are said to differ in __________. (a) molecular formula (b) configuration (c) conformation (d) constitution

Description : The eclipsed and staggered forms of ethane are said to differ in __________. (a) molecular formula (b) configuration (c) conformation (d) constitution

Last Answer : conformation

It has Staggered pegs in two rows at Spacing. A. 100 mm. C. 400 mm B. 200 mm D. 50 mm

Description : It has Staggered pegs in two rows at Spacing. A. 100 mm. C. 400 mm B. 200 mm D. 50 mm

Last Answer : 200 mm

Why are splices staggered on multiconductor cables?

Description : Why are splices staggered on multiconductor cables?

Last Answer : To prevent the joint from being bulky.

The typical feature of information-rich classroom lecture is in the nature of being (A) Sedentary (B) Staggered (C) Factual (D) Sectoral

Description : The typical feature of information-rich classroom lecture is in the nature of being (A) Sedentary (B) Staggered (C) Factual (D) Sectoral

Last Answer : (C) Factual 

A sphere of radius r is cut from larger sphere of radius R. The distance between their centre is a. The centroid of the remaining valoume lies on the line of centres and the sistanc from the centre of the larger sphere is a.ar2 / (R2 - r2) b.107 dynes c.aR/(R2-r2) d.aR/(R - r) e.ar3 / (R3 - r3)

Description : A sphere of radius r is cut from larger sphere of radius R. The distance between their centre is a. The centroid of the remaining valoume lies on the line of centres and the sistanc from the centre of the larger sphere is a.ar2 / (R2 - r2) b.107 dynes c.aR/(R2-r2) d.aR/(R - r) e.ar3 / (R3 - r3)

Last Answer : e. ar3 / (R3 - r3)

In a single span bridge, the clear span is the distance between a) Centres of Abutments b) Inner faces of Abutments* c) Outer faces of Abutments d) Width of Abutment

Description : In a single span bridge, the clear span is the distance between a) Centres of Abutments b) Inner faces of Abutments* c) Outer faces of Abutments d) Width of Abutment

Last Answer : b) Inner faces of Abutments*

Where can I find these briolette jewel rivets?

Description : Where can I find these briolette jewel rivets?

Last Answer : Have you tried Rio Gems/Findings?

How do you remove rivets?

Description : How do you remove rivets?

Last Answer : Find a drill bit a little smaller than the rivets. Drill the rivet out. It should come right out as soon as it gets through the middle of the rivet. The original hole is left as it was. This is ... back together. You can put the same sized rivets back in the holes if you have a rivet gun and rivets

How many rivets in the golden gate bridge?

Description : How many rivets in the golden gate bridge?

Last Answer : 600,000 in each of the two towers

Addition of 2% nickel in steel makes it suitable for making (A) Electronic valves (B) Boiler plates, rivets etc. (C) Turbine blades (D) Connecting rod

Description : Addition of 2% nickel in steel makes it suitable for making (A) Electronic valves (B) Boiler plates, rivets etc. (C) Turbine blades (D) Connecting rod

Last Answer : (B) Boiler plates, rivets etc.

Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) Mandrels, twist drills, small lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Description : Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) ... lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Last Answer : (A) Small punches, broaches reamers and springs

In flange splices when the number of hammer and hand loose rivets is 30% or more of the total rivets on any side of the splice location, a) Need no be renewed b) wait for 100% loose rivets c) all the rivets should be renewed.* d) None of the above

Description : In flange splices when the number of hammer and hand loose rivets is 30% or more of the total rivets on any side of the splice location, a) Need no be renewed b) wait for 100% loose rivets c) all the rivets should be renewed.* d) None of the above

Last Answer : c) all the rivets should be renewed.*

Renewal of slack rivets should be taken up in steel girder bridges: a) All rivets which are hand loose or which have lost 50% of their head by corrosion. b) All hammer loose rivets where corrosion has set in between the head and the plate. c) In end stiffeners when the percentage of hammer loose rivets is >30% d) All the above*

Description : Renewal of slack rivets should be taken up in steel girder bridges: a) All rivets which are hand loose or which have lost 50% of their head by corrosion. b) All hammer loose rivets where corrosion has set ... . c) In end stiffeners when the percentage of hammer loose rivets is >30% d) All the above*

Last Answer : d) All the above*

Pitch of coil is defined as axial distance in compressed state of the coil. a) Yes b) It is measured in uncompressed state c) It is same in uncompressed or compressed state d) None of the listed

Description : Pitch of coil is defined as axial distance in compressed state of the coil. a) Yes b) It is measured in uncompressed state c) It is same in uncompressed or compressed state d) None of the listed

Last Answer : b) It is measured in uncompressed state

If Chris Bromham took off on his Yamaha and jumped a horizontal distance of 74.0 m across a row of cars and assuming that he started and landed at the same level and was airborne for 1.3 s, what was his initial (angled) velocity as he left the ground?

Description : If Chris Bromham took off on his Yamaha and jumped a horizontal distance of 74.0 m across a row of cars and assuming that he started and landed at the same level and was airborne for 1.3 s, what was his initial (angled) velocity as he left the ground?

Last Answer : I really need help. If someone can explain this to me, it'll be great!

A man can row 9 (1/3) kmph in still water and finds that it takes him thrice as much time to row up than as to row down the same distance in the river. What is speed of the current ? A. 5km/hr B.3(1/2) km/hr C.4 (2/3) km/hr D.8 (3/2)km/hr

Description : A man can row 9 (1/3) kmph in still water and finds that it takes him thrice as much time to row up than as to row down the same distance in the river. What is speed of the current ? A. 5km/hr B.3(1/2) km/hr C.4 (2/3) km/hr D.8 (3/2)km/hr

Last Answer : Answer- C Basic Formula: Speed of current = ½ (a-b) km/hr Explanation: Let man's rate upstream be x km/hr. Then his rate downstream is 3 x km/hr Given: Speed in still water = 9 (1/3) = 28/3 km/hr i.e, ½ (a+b) = ... the current = ½ (a-b) = ½ (14 - 14/3) = ½ (42-14/3) = 28/6 = 4 (2/3) km/hr

A fisherman rows to a place 24km distance and back in 7 hours. He finds that he can row 2km with the stream in the same time 1.5 km against the stream.The rate of the stream is? A) 7 B) 5 C) 3 D) 1

Description : A fisherman rows to a place 24km distance and back in 7 hours. He finds that he can row 2km with the stream in the same time 1.5 km against the stream.The rate of the stream is? A) 7 B) 5 C) 3 D) 1 

Last Answer : Answer: D  Explanation: Let be moves 2 km downstream in x Hours Then in speed downstream = 2/x kmph Speed in upstream = 1.5/x kmph ==> 24/2/X + 24/1.5/X = 7 12x+16x=7 Therefore x=1/4 Speed in downstream = 8 Kmph Speed in upstream = 6 Kmph Then the Rate of stream = 1/2 (8 - 6) = 1 Kmph

What distance (in kilometers) does Alyssa run in one minuteAngel Alyssa were at track practice. The track is 2/5 km around. Angel ran 1 lap in 2 minutes Alyssa ran 3 laps in 4 minutes?

Description : What distance (in kilometers) does Alyssa run in one minuteAngel Alyssa were at track practice. The track is 2/5 km around. Angel ran 1 lap in 2 minutes Alyssa ran 3 laps in 4 minutes?

Last Answer : I think it's 3/10

Arches in the form of masonry arcs struck from more than four centres, are called (A) Two curved arches (B) Gothic arches (C) Ogee arches (D) Drop gothic arches

Description : Arches in the form of masonry arcs struck from more than four centres, are called (A) Two curved arches (B) Gothic arches (C) Ogee arches (D) Drop gothic arches

Last Answer : Answer: Option C

The normal stress is same in all directions at a point in a fluid (A) Only when the fluid is frictionless (B) Only when the fluid is incompressible and has zero viscosity (C) When there is no motion of one fluid layer relative to an adjacent layer (D) Irrespective of the motion of one fluid layer relative to an adjacent layer

Description : The normal stress is same in all directions at a point in a fluid (A) Only when the fluid is frictionless (B) Only when the fluid is incompressible and has zero viscosity (C) When there ... to an adjacent layer (D) Irrespective of the motion of one fluid layer relative to an adjacent layer

Last Answer : Answer: Option C

The distance or length of the myofibril between two adjacent z-bands is called

Description : The distance or length of the myofibril between two adjacent z-bands is called

Last Answer : The distance or length of the myofibril between two adjacent z-bands is called

The curve composed of two arcs of different radii having their centres on the opposite side of the curve, is known (A) A simple curve (B) A compound curve (C) A reverse curve (D) A vertical curve

Description : The curve composed of two arcs of different radii having their centres on the opposite side of the curve, is known (A) A simple curve (B) A compound curve (C) A reverse curve (D) A vertical curve

Last Answer : (C) A reverse curve

In welded wire mesh, the longitudinal wire is placed at (A) 10 cm centres (B) 15 cm centres (C) 20 cm centres (D) 25 cm centres

Description : In welded wire mesh, the longitudinal wire is placed at (A) 10 cm centres (B) 15 cm centres (C) 20 cm centres (D) 25 cm centres

Last Answer : Answer: Option B

In which Molecule the distance between two adjacent carbon atoms is longest? -Do You Know?

Description : In which Molecule the distance between two adjacent carbon atoms is longest? -Do You Know?

Last Answer : answer:

Two waves, each of amplitude 1.5 mm and frequency 10 Hz, are travelling in opposite direction with a speed of 20 mm/s. The distance in mm between adjacent nodes is : (1) 1.0 (2) 1.2 (3) 1.5 (4) 2.0

Description : Two waves, each of amplitude 1.5 mm and frequency 10 Hz, are travelling in opposite direction with a speed of 20 mm/s. The distance in mm between adjacent nodes is : (1) 1.0 (2) 1.2 (3) 1.5 (4) 2.0

Last Answer : (1) 1.0 Explanation: Since the amplitudes, frequency and the speed of both the waves are in same, hence the wavelength of the composite wave will be the same as the single wave.