If the rivets in adjacent rows are staggered and outermost row has only one rivet, the arrangement of the rivets, is called (A) Chain riveting (B) Zig-zag riveting (C) Diamond riveting (D) None of these

If the rivets in adjacent rows are staggered and outermost row has only one rivet, the
arrangement of the rivets, is called
(A) Chain riveting
(B) Zig-zag riveting
(C) Diamond riveting
(D) None of these
by

1 Answer

Answer :

(C) Diamond riveting
by

Related questions

The distance between the centres of adjacent rivets in the same row, is called (A) Pitch (B) Lap (C) Gauge (D) Staggered pitch

Description : The distance between the centres of adjacent rivets in the same row, is called (A) Pitch (B) Lap (C) Gauge (D) Staggered pitch

Last Answer : (A) Pitch

The weakest section of a diamond riveting, is the section which passes through (A) First row (B) Second row (C) Central row (D) One rivet hole of end row

Description : The weakest section of a diamond riveting, is the section which passes through  (A) First row  (B) Second row  (C) Central row  (D) One rivet hole of end row 

Last Answer : (A) First row

Failure of riveted joints is due to (A) Tearing of the plates between the rivet hole and the edge of the plate (B) Tearing of plates between rivets (C) Shearing of rivets (D) All the above

Description : Failure of riveted joints is due to  (A) Tearing of the plates between the rivet hole and the edge of the plate  (B) Tearing of plates between rivets  (C) Shearing of rivets  (D) All the above 

Last Answer : (D) All the above 

What are Zig Zag Wraps made out of?

Description : What are Zig Zag Wraps made out of?

Last Answer : answer: Each of the Zig-Zag Blunt Wraps come individually wrapped in a Resealable Foil Packaging. There are 2 Blunts Rolls/Pack, each made in Dominican Republic with the finest Zig-Zag Quality approved ... , soaked in a chemical that gives you a kind of brain damage that makes you taste apples.

In part programming, interpolation is used for obtaining trajectory. a.helicoidal b.pentagonal c.triangular d.zig-zag

Description : In part programming, interpolation is used for obtaining trajectory. a.helicoidal b.pentagonal c.triangular d.zig-zag

Last Answer : a.helicoidal

Which of the following statement is false? a.The potential energy of a particle has the form Ep = k2x. The force acting on the particle is constant (k is a constant) b.The linear velocity of bodies near the earth's equator (due to rotation of earth) is more than the velocities of particles at the pole c.107 dynes d.A cyclist should move along a zig-zag path while ascending a steep hill e.The density of milk decreases when cream is taken out of milk

Description : Which of the following statement is false? a.The potential energy of a particle has the form Ep = k2x. The force acting on the particle is constant (k is a constant) b.The linear velocity of ... zag path while ascending a steep hill e.The density of milk decreases when cream is taken out of milk

Last Answer : e. The density of milk decreases when cream is taken out of milk

Does the Brother CS6000i have a zig zag feature?

Description : Does the Brother CS6000i have a zig zag feature?

Last Answer : Yes, the Brother CS6000i features a zig zag stitch, and is even capable of an extra wide 7mm zig zag pattern!

Who can tell me online store outlet that sells zig zag running shoes?

Description : Who can tell me online store outlet that sells zig zag running shoes?

Last Answer : You can easily buy Zig Zag running shoes online directly from the Reebok website. They are also available for sale on www.Amazon.com and www.jjbsports.com

WHAT is ZIG ZAG Grounding Transformer

Description : WHAT is ZIG ZAG Grounding Transformer

Last Answer : ANSWER: Three Single Phase Transformers can be connected to have a three phase Zig Zag Transformer. This system can be used for either grounding or developing a fourth WIRE from a three phase neutral. An example ... - three phase - three wire system to a 480Y/277 V - three phase - four wire system

Path followed by water jet issuing from the bottom of a water tank will be a (A) Parabola (vertex being at the opening) (B) Hyperbola (C) Horizontal straight line (D) Zig-zag path (which is geometrically undefined)

Description : Path followed by water jet issuing from the bottom of a water tank will be a (A) Parabola (vertex being at the opening) (B) Hyperbola (C) Horizontal straight line (D) Zig-zag path (which is geometrically undefined)

Last Answer : (A) Parabola (vertex being at the opening)

What is the maximum number of open bays if transverse zig zag bracing is installed along the width of a birdcage scaffold? a. Four b. Three c. Five d. Six

Description : What is the maximum number of open bays if transverse zig zag bracing is installed along the width of a birdcage scaffold? a. Four b. Three c. Five d. Six

Last Answer : b. Three

At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Description : At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Last Answer : a. 35-55 degree

A hiker stands at the bottom of steep hill. The hiker may follow a straight line path to the top of the hill, a distance of 300 feet, or she may follow a zig-zag path to the top of the hill and walk a distance of 600 feet. The work done by the force of gravity along the zig-zag path is how many times the work going along the straight path? Is it: w) equal x) twice y) 4 times z) 8 times?

Description : A hiker stands at the bottom of steep hill. The hiker may follow a straight line path to the top of the hill, a distance of 300 feet, or she may follow a zig-zag path to the top of the hill and walk a ... times the work going along the straight path? Is it: w) equal x) twice y) 4 times z) 8 times?

Last Answer : ANSWER: W -- EQUAL 

The main application of delta/zig-zag connected 3-phase transformer is to supply

Description : The main application of delta/zig-zag connected 3-phase transformer is to supply (A) balanced loads (B) unbalanced loads (C) furnace loads (D) single-phase loads

Last Answer : The main application of delta/zig-zag connected 3-phase transformer is to supply unbalanced loads

What is Rivet and Riveting?

Description : What is Rivet and Riveting?

Last Answer : A rivet is a small, cylindrical and smooth shaft whose one end is swollen (called Head) while the other end is flat. Hot rivets are used to join the metal plates. The process in which two metal plates are joined together by means of rivets is called riveting.

When two plates butt together and are riveted with two cover plates with two rows of rivets, the joint is known as (A) Lap joint (B) Butt joint (C) Single riveted single cover butt joint (D) Double riveted double cover butt joint

Description : When two plates butt together and are riveted with two cover plates with two rows of rivets, the joint is known as (A) Lap joint (B) Butt joint (C) Single riveted single cover butt joint (D) Double riveted double cover butt joint

Last Answer : (D) Double riveted double cover butt joint

When the distance between centers of two adjacent rivets connecting the members subjected to either compression or tension exceeds the maximum pitch, then the additional rivets which are not subjected to the calculated stresses are known as (a) Packing rivets (b) Long-grip rivets (c) Tacking rivets (d) Auxiliary rivets

Description : When the distance between centers of two adjacent rivets connecting the members subjected to either compression or tension exceeds the maximum pitch, then the additional rivets which are not subjected to the ... (a) Packing rivets (b) Long-grip rivets (c) Tacking rivets (d) Auxiliary rivets

Last Answer : (c) Tacking rivets

If b is the width of a plate joined by diamond riveting of diameter d, the efficiency of the joint is given by (A) (b + d)/b (B) (b - d)/b (C) (d - b)/d (D) (b - d)/d

Description : If b is the width of a plate joined by diamond riveting of diameter d, the efficiency of the joint is  given by  (A) (b + d)/b (B) (b - d)/b (C) (d - b)/d (D) (b - d)/d

Last Answer : (B) (b - d)/b

It has Staggered pegs in two rows at Spacing. A. 100 mm. C. 400 mm B. 200 mm D. 50 mm

Description : It has Staggered pegs in two rows at Spacing. A. 100 mm. C. 400 mm B. 200 mm D. 50 mm

Last Answer : 200 mm

The most economical lighting layout which is suitable for narrow roads is (A) Single side lighting (B) Staggered system (C) Central lighting system (D) None of the above

Description : The most economical lighting layout which is suitable for narrow roads is (A) Single side lighting (B) Staggered system (C) Central lighting system (D) None of the above

Last Answer : Answer: Option A

An optimal solution of an assignment problem can be obtained only if a. Each row & column has only one zero element b. Each row & columns has at least one zero element c. The data is arrangement in a square matrix d. None of the above

Description : An optimal solution of an assignment problem can be obtained only if a. Each row & column has only one zero element b. Each row & columns has at least one zero element c. The data is arrangement in a square matrix d. None of the above

Last Answer : d. None of the above

Statistical table is the systematic arrangement of numerical data presented in rows and columns. What are the rules to be followed while constructing such a table?

Description : Statistical table is the systematic arrangement of numerical data presented in rows and columns. What are the rules to be followed while constructing such a table?

Last Answer : Statistical table is the systematic arrangement of numerical data presented in rows and columns. ... be followed while constructing such a table?

Pick up the incorrect statement (A) The cross-sectional area of the welded member is effective (B) A welded joint develops strength of its parent metal (C) Welded joints provide rigidity (D) Welding takes more time than riveting

Description : Pick up the incorrect statement (A) The cross-sectional area of the welded member is effective (B) A welded joint develops strength of its parent metal (C) Welded joints provide rigidity (D) Welding takes more time than riveting

Last Answer : (D) Welding takes more time than riveting

Slicing Compressed Sparse Row (CSR) matrix in Scipy - how to select some rows from CSR matrix? -Web-Development

Description : Slicing Compressed Sparse Row (CSR) matrix in Scipy - how to select some rows from CSR matrix? -Web-Development

Last Answer : answer:

There is certain number of rows of chairs in a room .The number of chairs in each row is thrice the total number of rows. Find the number of charis in

Description : There is certain number of rows of chairs in a room .The number of chairs in each row is thrice the total number of rows. Find the number of charis in

Last Answer : There is certain number of rows of chairs in a room .The number of chairs in each row is thrice ... in the room if the total number of chairs is 2187

If angel plants the same number of flowers in each of 5 rows he will have none left over.If he plants 1 more in each row then he did in the previous rowhow many flowers does he Have left?

Description : If angel plants the same number of flowers in each of 5 rows he will have none left over.If he plants 1 more in each row then he did in the previous rowhow many flowers does he Have left?

Last Answer : None

What is the minimum number of rows and columns that a word table can have a) 1 row & 1 columnb) 2 rows & 2 columnsc) Zerod)1 row & 2 columnse) None of The Above

Description : What is the minimum number of rows and columns that a word table can have a) 1 row & 1 column b) 2 rows & 2 columns c) Zero d)1 row & 2 columns e) None of The Above

Last Answer : a) 1 row & 1 column

The minimum number of rows and columns that a word table can have, is: a) Zero b) 1 Row and 1 Column c) 1 Row and 2 Columnsd) None of The Above

Description : The minimum number of rows and columns that a word table can have, is: a) Zero b) 1 Row and 1 Column c) 1 Row and 2 Columns d) None of The Above

Last Answer : b) 1 Row and 1 Column

A man rows to a place 48km distant and back in 14 hours. He finds that he can row 4km with the stream in the same time as 3km against the stream. Find the rate of the stream. A.2 km/hr B.1 km/hr C.3 km/hr D.3.5km/hr

Description : A man rows to a place 48km distant and back in 14 hours. He finds that he can row 4km with the stream in the same time as 3km against the stream. Find the rate of the stream. A.2 km/hr B.1 km/hr C.3 km/hr D.3.5km/hr

Last Answer : Answer- B Basic Formula: Speed of the stream = ½ (a-b) km / hr Speed = distance traveled / time taken Explanation: Suppose he moves 4km downstream in x hours Then, downstream a= 4 / x km/hr Speed upstream b = 3/ x km/hr ... = 1/2 a=8 km/hr ,b = 6 km/hr rate of stream = ½ (8 - 6 ) = 1 km/hr

A gardener had a number of shrubs to plant in rows . At first he tried to plant 8, then 12 and then 16 in a row but he always had 3 shrubs left with him . On trying 7 shrubs he was left with none.Find the total number of shrubs.

Description : A gardener had a number of shrubs to plant in rows . At first he tried to plant 8, then 12 and then 16 in a row but he always had 3 shrubs left with him . On trying 7 shrubs he was left with none.Find the total number of shrubs.

Last Answer : Ans 3. L.C.M of 8,12,16 = 48 Now, 48 x 1 + 3 = 51 - not divisible by 7 48 x 2 + 3 = 99 - not divisible by 7 48 x 3 + 3 = 147 - not divisible by 7 Required number = 147

X, Y , Z are three towns on a lake which flows uniformly. Y is equidistant from X and Z. A man rows from X to Y and returns in 20hrs. He can row from X to Z in 8 hr. The ratio of speed of the man in still water to the speed of the current is. A) 3:5 B) 5:3 C) 2:3 D) None of these

Description : X, Y , Z are three towns on a lake which flows uniformly. Y is equidistant from X and Z. A man rows from X to Y and returns in 20hrs. He can row from X to Z in 8 hr. The ratio of speed of the man in still water to the speed of the current is. A) 3:5 B) 5:3 C) 2:3 D) None of these

Last Answer : ANSWER: A Explanation: Let the speed of man in still water = x km/hr Speed of the current = y km/hr Speed of downstream = (x+ y) km/hr Speed of upstream = ( x - y) km/hr Let the lake be flowing from X to Z and  xy = yz a ... y = 1 / 4  4x - 4y = x + y  3x = 5y x / y = 3 / 5 x : y = 3 : 5

A fisherman rows to a place 24km distance and back in 7 hours. He finds that he can row 2km with the stream in the same time 1.5 km against the stream.The rate of the stream is? A) 7 B) 5 C) 3 D) 1

Description : A fisherman rows to a place 24km distance and back in 7 hours. He finds that he can row 2km with the stream in the same time 1.5 km against the stream.The rate of the stream is? A) 7 B) 5 C) 3 D) 1 

Last Answer : Answer: D  Explanation: Let be moves 2 km downstream in x Hours Then in speed downstream = 2/x kmph Speed in upstream = 1.5/x kmph ==> 24/2/X + 24/1.5/X = 7 12x+16x=7 Therefore x=1/4 Speed in downstream = 8 Kmph Speed in upstream = 6 Kmph Then the Rate of stream = 1/2 (8 - 6) = 1 Kmph

A woman rows to a place 24km distant and come back in 7 hrs. She finds that she can row 2km with the stream in the same time as 1.5km against the stream. The rate of the stream is, A) 2 B) 4 C) 1 D) 3

Description : A woman rows to a place 24km distant and come back in 7 hrs. She finds that she can row 2km with the stream in the same time as 1.5km against the stream. The rate of the stream is, A) 2 B) 4 C) 1 D) 3

Last Answer : ANSWER: C  Explanation:  Suppose she move 2km downstream in x hrs  Then, speed of downstream = (2/x) km/hr  Speed of upstream = (1.5/x) km/hr  Therefore 24/(2/x) + 24/(1.5/x) = 7  12x + 16x = 7 ... of downstream = 8km/hr and upstream = 6km/hr  Rate of the stream = ½ (8 - 6 )km/hr  = 1 km/hr

The minimum number of rivets for the connection of a gusset plate, is (A) 1 (B) 2 (C) 3 (D) 4

Description : The minimum number of rivets for the connection of a gusset plate, is (A) 1 (B) 2 (C) 3 (D) 4

Last Answer : (B) 2

A, B, C and D are to be seated in a row. C and D cannot be on adjacent seat. Also, B cannot be at the third place. Which of the following must be false? (1) A is at the fourth place (2) A is at the third place (3) A is at the second pla

Description : A, B, C and D are to be seated in a row. C and D cannot be on adjacent seat. Also, B cannot be at the third place. Which of the following must be false? (1) A is at the fourth place (2) A is at the third place (3) A is at the second pla

Last Answer : (4) A is at the first place

According to Unwin's formula, the diameter of a rivet of plate of thickness is : (A) d = 6.05 t (B) d = 1.5 t + 4 (C) d = t(D) d = t + 1.5

Description : According to Unwin's formula, the diameter of a rivet of plate of thickness is :  (A) d = 6.05 t (B) d = 1.5 t + 4  (C) d = t (D) d = t + 1.5 

Last Answer : (A) d = 6.05 t

In case of an eccentric loading on a bracket subjected to moment M, the tangential force developed in any rivet, at right angles to its radius vector r is (A) Mr/ r² (B) r²/Mr(C) Mr²/ r² (D) Mr/ r²

Description : In case of an eccentric loading on a bracket subjected to moment M, the tangential force  developed in any rivet, at right angles to its radius vector r is  (A) Mr/ r²  (B) r²/Mr (C) Mr²/ r²  (D) Mr/ r² 

Last Answer : (A) Mr/ r² 

Three playing cards in a row. Can you name them with these clues? There is a two to the right of a king. A diamond will be found to the left of a spade. An ace is to the left of a heart. A heart is to the left of a spade. Now, identify all three cards. -Riddles

Description : Three playing cards in a row. Can you name them with these clues? There is a two to the right of a king. A diamond will be found to the left of a spade. An ace is to the left of a heart. A heart is to the left of a spade. Now, identify all three cards. -Riddles

Last Answer : Ace of Diamonds, King of Hearts, Two of Spades.

A young girl, Violet by name, was visiting with a group of her schoolmates at a friend’s house. The air was filled with the noise of loud conversations, when an older woman called out for silence. She then asked one of the girls in attendance to remove something from a black bag she was holding. The older woman then announced, “Violet, you have the honor of being first!” Violet was then ushered to the center of the room where the older woman pushed a body part of an animal into Violet’s hand. Suddenly, everything went dark for the young girl. Violet began to feel dizzy, and felt someone’s hands on her. She then felt a slight push. As Violet staggered forward in the darkness, the loud chanting and shouting increased around her. Finally, Violet’s hand bumped into something which, when the da

Description : A young girl, Violet by name, was visiting with a group of her schoolmates at a friend's house. The air was filled with the noise of loud conversations, when an older woman called out for ... and shouting increased around her. Finally, Violet's hand bumped into something which, when the da -Riddles

Last Answer : Violet was at a birthday party, and was selected to be first in the Pin the Tail on the Donkey game they were playing. She was successful in pinning the tail just where it belonged. The body part of the animal was, of course, the donkey’s tail.

Would traffic flow better if rush hour was staggered from schools and businesses?

Description : Would traffic flow better if rush hour was staggered from schools and businesses?

Last Answer : How the heck would you do that? People who work have kids. As it is, it’s hard enough to get the kids to school, get to work, and get home at a reasonable hour.

The eclipsed and staggered conformation of ethane is due to -

Description : The eclipsed and staggered conformation of ethane is due to -

Last Answer : The eclipsed and staggered conformation of ethane is due to - A. Free rotation about C-C single bond ... rotation about C-C bond D. None of the above

An alternator will fail to produce line voltage as a result of _____________. A. a closed circuit breaker B. oxidized slip rings C. improperly staggered brushes D. exciter generator failure

Description : An alternator will fail to produce line voltage as a result of _____________. A. a closed circuit breaker B. oxidized slip rings C. improperly staggered brushes D. exciter generator failure

Last Answer : Answer: D

The direction of rotation of a DC propulsion motor can be changed by reversing the _____________. A. brush holder position B. polarity of the field poles C. brush staggered order D. motor interpole connections

Description : The direction of rotation of a DC propulsion motor can be changed by reversing the _____________. A. brush holder position B. polarity of the field poles C. brush staggered order D. motor interpole connections

Last Answer : Answer: B

Is it possible to isolate pure staggered ethane or pure eclipsed ethane at room temperature? Explain .

Description : Is it possible to isolate pure staggered ethane or pure eclipsed ethane at room temperature? Explain .

Last Answer : The energy differences between staggered and eclipsed forms of ethane is just 12.55 kj mol_1 which is easily met by collisions of the molecules at room temperature. Therefore, it is not possible to isolate either pure staggered or pure eclipsed ethane at room temperature.

The eclipsed and staggered forms of ethane are said to differ in __________. (a) molecular formula (b) configuration (c) conformation (d) constitution

Description : The eclipsed and staggered forms of ethane are said to differ in __________. (a) molecular formula (b) configuration (c) conformation (d) constitution

Last Answer : conformation

Why are splices staggered on multiconductor cables?

Description : Why are splices staggered on multiconductor cables?

Last Answer : To prevent the joint from being bulky.

Zig Ziglar Famous Motivational And Inspirational Quotes

Description : Zig Ziglar Famous Motivational And Inspirational Quotes

Last Answer : 1. You are the only person on earth who can use your ability. 2. When you put faith, hope and love together, you can raise positive kids in a negative world.  3. There has never been a ... in your entire arsenal is integrity.  27. Expect the best. Prepare for the worst. Capitalize on what comes.

The typical feature of information-rich classroom lecture is in the nature of being (A) Sedentary (B) Staggered (C) Factual (D) Sectoral

Description : The typical feature of information-rich classroom lecture is in the nature of being (A) Sedentary (B) Staggered (C) Factual (D) Sectoral

Last Answer : (C) Factual 

What's a riveting read for travel through central and eastern Europe?

Description : What's a riveting read for travel through central and eastern Europe?

Last Answer : answer:I can't think of anything more riveting than books on the geography, culture, and history of the places you'll be travelling through, and then collecting local books on the same subjects as you ... through to buy the T-shirt or the cuckoo clock souvenir just to prove you got of the bus.

Process of welding with respect to riveting takes a. More time b. Less time c. Same time d. None

Description : Process of welding with respect to riveting takes a. More time b. Less time c. Same time d. None

Last Answer : b. Less time