Why do Americans not pronounce the letter L in the word solder ?

Why do Americans not pronounce the letter L in the word solder ?
by

1 Answer

Answer :

Like saying suit, instead of sweet for suite? And what about the NUKULAR?
by

Related questions

What 11-letter English word does everyone pronounce incorrectly? -Riddles

Description : What 11-letter English word does everyone pronounce incorrectly? -Riddles

Last Answer : Incorrectly!

What are the top 5 russian-sounding words that Americans can pronounce and spell?

Description : What are the top 5 russian-sounding words that Americans can pronounce and spell?

Last Answer : What kind of product? A good airline would be PubicAir. A good potato chip could be Spud-nic.

Do you pronounce the "L" in "palm"?

Description : Do you pronounce the "L" in "palm"?

Last Answer : answer:Yes, I do as well. I wouldn’t take Dictionary.com as the authority on pronunciation or anything else. The OED gives the following: “Pronunciation: Brit. /pɑːm/ , U.S. /pɑ(l)m/” Merriam-Webster gives: “noun \ˈpäm, ˈpälm, ˈpȯm, ˈpȯlm\”

Why can't Scandinavians pronounce the letter 'w'?

Description : Why can't Scandinavians pronounce the letter 'w'?

Last Answer : I’m not sure about the Scands.. The Dutch pronounce “W’ like “V”. A good friend of mine’s last name was Wezenbeek and her Mom always said “Vezenbeek”

Etymology -- why does the verb "pronounce" lose the letter O when it becomes the noun "pronunciation"?

Description : Etymology -- why does the verb "pronounce" lose the letter O when it becomes the noun "pronunciation"?

Last Answer : answer:I recall I always used to say “pronounciation”. Anyway, I looked it up, and according to Wiktionary, it’s derived > From Latin pronuntiatio, noun of action from perfect passive participle pronuntiatus, from verb pronuntiare proclaim, from pro- for + nuntiare announce.

How to Pronounce a German Letter With an Umlaut?

Description : How to Pronounce a German Letter With an Umlaut?

Last Answer : Even if you're not reading German texts, it is not uncommon tocome across German words. Sometimes they are used in expressions,like über, which is often used to express superiority, excess, oran elevated ... it is to alter. An a with an umlautwill undoubtedly sound different than an o with an um

Did anyone here see the final episode of The L Word?

Description : Did anyone here see the final episode of The L Word?

Last Answer : You killed Jenny?

Best place to watch the L Word online?

Description : Best place to watch the L Word online?

Last Answer : Netflix has it as an instant view. Then again you probably wouldn’t be asking if you had Netflix huh? D’oh!

Why do so many Americans sleep with the TV on in their bedroom?

Description : Why do so many Americans sleep with the TV on in their bedroom?

Last Answer : Do so many sleep with the TV on?

Spoiler Alert! If you watch the TV series The Americans can you answer a question?

Description : Spoiler Alert! If you watch the TV series The Americans can you answer a question?

Last Answer : I don’t know the answer but I didn’t know it was back again! Yay!

What kind of TV broadcasting do Americans use?

Description : What kind of TV broadcasting do Americans use?

Last Answer : American TV blows…

Americans, what is your favorite television show from a different country? All others, what is your favorite US television show?

Description : Americans, what is your favorite television show from a different country? All others, what is your favorite US television show?

Last Answer : Ooh, The Saint was great too.

what percentage of Americans are on anti-depressants?

Description : what percentage of Americans are on anti-depressants?

Last Answer : answer:Very good question. In the past 2 months, I have discovered that several of my friends are on anti-depressants. Most of them are on Lexapro. Side effects include suicidal thoughts. The past couple ... Soma is, but there are some scary comparisons to be made to modern day US and that book.

Is there a way I can connect 2 wires without solder?

Description : Is there a way I can connect 2 wires without solder?

Last Answer : answer:Electrical tape? *Although I’m not positive… This is more a guess for you to research as an option so please don’t just go do it.

Why does carbon attract solder smoke?

Description : Why does carbon attract solder smoke?

Last Answer : I haven't studied this in a while but solder used to be a combination of lead and some type of flux which made the lead flow and cover the connection of copper to copper. If the heat was ... may now be called Speedline Technologies. Google one of those names and see if anything helpful comes up. SRM

Good jeweler in San Francisco who can solder a ring?

Description : Good jeweler in San Francisco who can solder a ring?

Last Answer : answer:you might find something in here San Francisco Jewelry Repair in San Francisco CA http://www.superpages.com/yellowpages/C-Jewelry+Repair/S-CA/T-San+Francisco/ jewelry repair in San Francisco, ... Gem and Jewelry World's Foremost Resource on The Internet http://www.ganoksin.com/site-map.htm

Where can I learn to solder online?

Description : Where can I learn to solder online?

Last Answer : You may want to find someone to teach you in person. I’ve known people to hurt themselves before….

Solder or solder is a mixture of which metal? -General Knowledge

Description : Solder or solder is a mixture of which metal? -General Knowledge

Last Answer : answer:

I need someone who can solder -Prague

Description : Hello I would like to solder a 3.5MM jack to the headphone cable (I have a broken cable in the jack), we will agree on a financial reward, I live in Prague.

Last Answer : This site is not intended for advertising!

Which among the following is used as solder.

Description : Which among the following is used as solder.

Last Answer : Which among the following is used as solder. A. Cu and Pb B. Zn and Cu C. Pb and Sn D. Fe and Zn

What is the type of solder that would be used in hard soldering?

Description : What is the type of solder that would be used in hard soldering?

Last Answer : Need answer

Solder?

Description : Solder?

Last Answer : DefinitionSolder is used to connect electric wires or other metal parts together. Solder poisoning occurs when someone swallows solder in large amounts. It can also ... , mouth, and throat Metallic tasteVision problemsYellow eyes (jaundice)Gastrointestinal Abdominal painConstipationDiarrheaExcessiv

An alloy used in making heating elements for electric heating device is - (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Description : An alloy used in making heating elements for electric heating device is - (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Last Answer : (3) Nichrome Explanation: Nichrome is a mixture of chromium and nickel. Nichrome wire is a great conductor of electricity. Nichrome is used to make heating coils and other types of elements in household appliances.

Solder metal is an alloy of – (1) lead and tin (2) lead and antimony (3) copper and zinc (4) copper and tin

Description : Solder metal is an alloy of – (1) lead and tin (2) lead and antimony (3) copper and zinc (4) copper and tin

Last Answer : (1) lead and tin Explanation: A solder is a fusible metal alloy of tin and lead with a melting point or melting range of 90 to 450°C, used in a process called soldering where it is melted to jain metallic surfaces. It is especially useful in electronics and plumbing.

Which of the following is used in welding broken pieces of iron rails and machine parts? (1) Aluminium sulphate (2) Solder (3) Aluminium powder (4) None of the above

Description : Which of the following is used in welding broken pieces of iron rails and machine parts? (1) Aluminium sulphate (2) Solder (3) Aluminium powder (4) None of the above

Last Answer : (3) Aluminium powder Explanation: Aluminum powder is a highly flammable powder created by grinding aluminum into fine grains of material. In times past, this flammable metal powder was ... of the tools utilized in various applications of pyrotechnics, including the creation of fireworks displays.

Solder is an alloy of – (1) lead, zinc (2) copper, lead (3) tin, lead (4) sodium, lead

Description : Solder is an alloy of – (1) lead, zinc (2) copper, lead (3) tin, lead (4) sodium, lead

Last Answer : (3) tin, lead Explanation: Tin/lead solders, also called soft solders, are commercially available with tin concentrations between 5% and 70% by weight. The greater the tin concentration, the greater the solder ... at 370 °F or 188 °C and 63/37 Sn/Pb used principally in electrical/electronic work.

A capacitor discolored due to excessive heat should be _____________. A. calibrated using a capactance wheatstone bridge B. replaced and the reason for the overheating found C. cooled with a spray can of refrigerant approved for this purpose D. resoldered with care taken to insure that the origional cold solder joint is repaired

Description : A capacitor discolored due to excessive heat should be _____________. A. calibrated using a capactance wheatstone bridge B. replaced and the reason for the overheating found C. cooled with a spray ... purpose D. resoldered with care taken to insure that the origional cold solder joint is repaired

Last Answer : Answer: B

The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Description : The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Last Answer : Answer: C

When troubleshooting an electronic circuit, a cold solder joint can be located with the aid of an ohmmeter. Once the problem has been located, you should _________________. A. reheat the circuit in an oven to an even temperature and recheck with an ohmmeter B. reheat the connection with a match and recheck with an ohmmeter C. reheat connection with a soldering tool and recheck with an ohmmeter D. do nothing as this is the normal condition

Description : When troubleshooting an electronic circuit, a cold solder joint can be located with the aid of an ohmmeter. Once the problem has been located, you should _________________. A. reheat the circuit in an ... a soldering tool and recheck with an ohmmeter D. do nothing as this is the normal condition

Last Answer : Answer: C

When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Description : When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Last Answer : Answer: B

Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded to the board may come loosened from the board. C. The circuit board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Description : Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded ... board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Last Answer : Answer: B

What are the components of solder?

Description : What are the components of solder?

Last Answer : tin and lead

The largest consumption of zinc for alloys is in the making of (A) Bearing metal (B) Brasses (C) Brazing solder

Description : The largest consumption of zinc for alloys is in the making of (A) Bearing metal (B) Brasses (C) Brazing solder

Last Answer : (B) Brasses

Nickel is a constituent of (A) Bronze (B) Solder (C) Duralumin (D) Monel metal

Description : Nickel is a constituent of (A) Bronze (B) Solder (C) Duralumin (D) Monel metal

Last Answer : (D) Monel metal

Wood metal is not used for making (A) Soft solder (B) Casting for dental work (C) Storage tank for storing brine and caustic soda (D) Fusible safety plug for pressure cooke

Description : Wood metal is not used for making (A) Soft solder (B) Casting for dental work (C) Storage tank for storing brine and caustic soda (D) Fusible safety plug for pressure cooke

Last Answer : (C) Storage tank for storing brine and caustic soda

Which of the following is not an alloy of tin? (A) White-bearing metal (B) Pewter type metal (C) Soft solder (D) German silver

Description : Which of the following is not an alloy of tin? (A) White-bearing metal (B) Pewter type metal (C) Soft solder (D) German silver

Last Answer : (D) German silver

Nickel and molybdenum are the basic constituents of (A) Hastelloy (B) German silver (C) Inconel (D) Solder

Description : Nickel and molybdenum are the basic constituents of (A) Hastelloy (B) German silver (C) Inconel (D) Solder

Last Answer : (A) Hastelloy

__________ does not contain tin as an alloying material. (A) Brass (B) Pewter (C) Solder (D) Babbitt metal

Description : __________ does not contain tin as an alloying material. (A) Brass (B) Pewter (C) Solder (D) Babbitt metal

Last Answer : (A) Brass

Among the tin containing alloys, __________ consumes the maximum amount of tin. (A) Solder (B) White metal (C) Pewter metal (D) Bronzes

Description : Among the tin containing alloys, __________ consumes the maximum amount of tin. (A) Solder (B) White metal (C) Pewter metal (D) Bronzes

Last Answer : (A) Solder

Maximum consumption of lead is in the manufacture of (A) Storage batteries (B) Solder alloys

Description : Maximum consumption of lead is in the manufacture of (A) Storage batteries (B) Solder alloys

Last Answer : (A) Storage batteries

What is solder?

Description : What is solder?

Last Answer : Solder is an alloy of lead and tin mixed in different proposition as per the work to be done. In some cases certain % of bismuth and cadmium is also added to decrease the melting point of the solder. ... lead is used and for sheet metal works soft solder of 1 part tin and 1 part lead is used.

Use of flux during soldering is done to (A) Increase fluidity of solder by lowering its melting temperature (B) Prevent oxide formation (C) Wash away surplus solder (D) Full up the joint gap

Description : Use of flux during soldering is done to (A) Increase fluidity of solder by lowering its melting temperature (B) Prevent oxide formation (C) Wash away surplus solder (D) Full up the joint gap

Last Answer : (B) Prevent oxide formation

Pick up the correct statement from the following: (A) Solder material is an alloy which melts at a temperature above 400°C (B) Brazing is done at temperature above 600°C to 1100°C (C) Brazing joint is stronger than the solder joint (D) All the above

Description : Pick up the correct statement from the following: (A) Solder material is an alloy which melts at a temperature above 400°C (B) Brazing is done at temperature above 600°C to 1100°C (C) Brazing joint is stronger than the solder joint (D) All the above

Last Answer : Answer: Option D

What is the tin-lead alloy percentage of solder used for electrical connectors, splices, and terminal lugs?

Description : What is the tin-lead alloy percentage of solder used for electrical connectors, splices, and terminal lugs?

Last Answer : 60-percent tin and 40-percent lead (60/40 solder).

What two metals are used to from soft solder?

Description : What two metals are used to from soft solder?

Last Answer : Tin and lead.

Why are small-wattage soldering irons not used to solder large conductors?

Description : Why are small-wattage soldering irons not used to solder large conductors?

Last Answer : Although its temperature is as high as the larger irons, it does not have thermal inertia.

What causes a "fractured solder" joint?

Description : What causes a "fractured solder" joint?

Last Answer : Movement of the parts being soldered while the solder is cooling.

Why should wire be stripped 1/32 inch longer than the depth of the solder barrel?

Description : Why should wire be stripped 1/32 inch longer than the depth of the solder barrel?

Last Answer : To prevent burning the insulation during the soldering process and to allow the wire to flex easier at a stress point.

How should excess solder be removed from a hot soldering iron?

Description : How should excess solder be removed from a hot soldering iron?

Last Answer : By use of a cleaning cloth.

Solder used in electronic repair is normally an alloy of what two elements? Solder used in electronic repair is normally an alloy of what two elements?

Description : Solder used in electronic repair is normally an alloy of what two elements?

Last Answer : Tin and lead.