Which of the following is used in welding broken pieces of iron rails and machine parts? (1) Aluminium sulphate (2) Solder (3) Aluminium powder (4) None of the above

Which of the following is used in welding broken pieces of iron rails and machine parts? (1) Aluminium sulphate (2) Solder (3) Aluminium powder (4) None of the above
by

1 Answer

Answer :

(3) Aluminium powder Explanation: Aluminum powder is a highly flammable powder created by grinding aluminum into fine grains of material. In times past, this flammable metal powder was used in photography to create bright flashes during a photographic session. Today, aluminum powder is one of the tools utilized in various applications of pyrotechnics, including the creation of fireworks displays.
by
selected

Related questions

Which of the following is used in welding broken pieces of iron rails and machine parts? (1) Aluminium sulphate (2) Solder (3) Aluminium powder (4) None of the above

Description : Which of the following is used in welding broken pieces of iron rails and machine parts? (1) Aluminium sulphate (2) Solder (3) Aluminium powder (4) None of the above

Last Answer : Aluminium powder

Which of the following is used in welding broken pieces of iron rails and parts of machine –

Description : Which of the following is used in welding broken pieces of iron rails and parts of machine –

Last Answer : Aluminum Powder

Rohan had learnt that non-metals on beating with hammer are generally broken into pieces. Which of the following is a non-metal? a) iron nail b)aluminium wire c)copper wire d)piece of coal

Description : Rohan had learnt that non-metals on beating with hammer are generally broken into pieces. Which of the following is a non-metal? a) iron nail b)aluminium wire c)copper wire d)piece of coal

Last Answer : d)piece of coal

Ammonial is a mixture of (1) aluminium powder and ammonium nitrate (2) aluminium powder and ammonium chloride (3) aluminium powder and ammonium sulphate (4) aluminium powder and potassium nitrate

Description : Ammonial is a mixture of (1) aluminium powder and ammonium nitrate (2) aluminium powder and ammonium chloride (3) aluminium powder and ammonium sulphate (4) aluminium powder and potassium nitrate

Last Answer : aluminium powder and ammonium nitrate

Bad odour in sanitary latrines is reduced by periodically sprinkling (A) Bleaching powder (B) Lime powder (C) Aluminium sulphate (D) None of these

Description : Bad odour in sanitary latrines is reduced by periodically sprinkling (A) Bleaching powder (B) Lime powder (C) Aluminium sulphate (D) None of these

Last Answer : Option B

a few pieces of iron are dropped in a blue solution of copper sulphate?

Description : a few pieces of iron are dropped in a blue solution of copper sulphate?

Last Answer : A few pieces of iron are dropped into a blue coloured copper sulphate solution, it makes the blue colour of the solution fades and eventually turns it into green.

What happens when? a) A cleaned iron plate or iron nail is kept in 10g of copper sulphate solution. b) A pinch of mercuric oxide is kept in a test tube. c)A small crystal of silver nitrate is dissolved in distilled water and a drop of ammonium hydroxide & a pinch of glucose powder are added.

Description : What happens when? a) A cleaned iron plate or iron nail is kept in 10g of copper sulphate solution. b) A pinch of mercuric oxide is kept in a test tube. c)A small crystal of silver nitrate is dissolved in distilled water and a drop of ammonium hydroxide & a pinch of glucose powder are added.

Last Answer : a) A cleaned iron plate or iron nail is kept in 10g of copper sulphate solution. After a few hours a coating of copper is seen on iron nail/plate. It is based on displacement reaction. ... on the inner walls of the test tube. Aldehyde group in glucose reduced silver nitrate to metallic silver.

A wire of resistanc e`9Omega` is broken in two parts. The length ratio being `1:2`. The two pieces are connected in parallel. The net resistance will

Description : A wire of resistanc e`9Omega` is broken in two parts. The length ratio being `1:2`. The two pieces are connected in parallel. The net resistance will

Last Answer : A wire of resistanc e`9Omega` is broken in two parts. The length ratio being `1:2`. The two pieces are ... 2Omega` B. `3Omega` C. `4Omega` D. `6Omega`

Rails in the field are generally welded by using a) Thermit welding b) Gas welding c) Electric arc welding d) Forge welding

Description : Rails in the field are generally welded by using a) Thermit welding b) Gas welding c) Electric arc welding d) Forge welding

Last Answer : a) Thermit welding

Rails used for A T Welding shall not normally be welded? (i) 20 years old . (ii) 30 years old (iii) 40 years old (iv) 50 years old*

Description : Rails used for A T Welding shall not normally be welded? (i) 20 years old . (ii) 30 years old (iii) 40 years old (iv) 50 years old*

Last Answer : iv) 50 years old*

Which gauge is used to measure the height of rail at the time of aligning of rails for AT welding? (i) Height gauge.* (ii) Vertical gauge (iii) Horizontal gauge (iv) As decided by site supervisor

Description : Which gauge is used to measure the height of rail at the time of aligning of rails for AT welding? (i) Height gauge.* (ii) Vertical gauge (iii) Horizontal gauge (iv) As decided by site supervisor

Last Answer : (iv) As decided by site supervisor

What are the recognized systems for pre heating of rails ends for AT Welding? (i) Oxygen –LPG & Compressed air petrol both* (ii) Only Oxygen –LPG (iii) Only Compressed air petrol both (iv) both are correct

Description : What are the recognized systems for pre heating of rails ends for AT Welding? (i) Oxygen –LPG & Compressed air petrol both* (ii) Only Oxygen –LPG (iii) Only Compressed air petrol both (iv) both are correct

Last Answer : ) Oxygen –LPG & Compressed air petrol both*

In new Rail as well as second hand rails how much end bends of the rails in lateral direction are permitted when checked with one metre straight edge before welding? (i) ± 0.2 mm in lateral direction (ii) ± 0.3 mm in lateral direction (iii) ± 0.5 mm in latera

Description : In new Rail as well as second hand rails how much end bends of the rails in lateral direction are permitted when checked with one metre straight edge before welding? (i) ± 0.2 mm in lateral direction (ii) ± 0.3 mm in lateral direction (iii) ± 0.5 mm in latera

Last Answer : (iii) ± 0.5 mm in latera

In new Rail as well as second hand rails how much end bends of the rails in vertical are permitted when checked with one meter straight edge before welding? (i) +0.5mm, -0 mm in vertical * (ii) +0.2mm, -.3 mm in vertical (iii) +0.3mm, -2 mm in vertical (iv) 0 mm, +.5 mm in vertical

Description : In new Rail as well as second hand rails how much end bends of the rails in vertical are permitted when checked with one meter straight edge before welding? (i) +0.5mm, -0 mm in vertical * (ii) +0.2mm, -.3 mm in vertical (iii) +0.3mm, -2 mm in vertical (iv) 0 mm, +.5 mm in vertical

Last Answer : (i) +0.5mm, -0 mm in vertical *

Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron

Description : Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron

Last Answer : (A) Rubber lined mild steel

Spray dryer for evaporating milk to produce milk powder is made of (A) Lead lined steel (B) Stainless steel (C) Aluminium (D) Cast iron

Description : Spray dryer for evaporating milk to produce milk powder is made of (A) Lead lined steel (B) Stainless steel (C) Aluminium (D) Cast iron

Last Answer : (B) Stainless steel

Aluminium salt commonly used to stop bleeding is - (1) Aluminium nitrate (2) Aluminium sulphate (3) Aluminium Chloride (4) Potash alum

Description : Aluminium salt commonly used to stop bleeding is - (1) Aluminium nitrate (2) Aluminium sulphate (3) Aluminium Chloride (4) Potash alum

Last Answer : (2) Aluminium sulphate Explanation: Alum (Aluminium Sulfate) is used to stop bleeding. For example, Styptic pencils containing aluminium sulfate are used as astringents to prevent bleeding from small shaving cuts. It constricts blood vessels to stop the flow of blood.

Aluminium salt commonly used to stop bleeding is (1) Aluminium nitrate (2) Aluminium sulphate (3) Aluminium Chloride (4) Potash alum

Description : Aluminium salt commonly used to stop bleeding is (1) Aluminium nitrate (2) Aluminium sulphate (3) Aluminium Chloride (4) Potash alum

Last Answer : Aluminium sulphate

Write balanced chemical equations for the following reactions: (a) Dilute sulphuric acid reacts with aluminium powder. (b) Dilute hydrochloric acid reacts with sodium carbonate. (c) Carbon dioxide is passed through lime water. -Chemistry

Description : Write balanced chemical equations for the following reactions: (a) Dilute sulphuric acid reacts with aluminium powder. (b) Dilute hydrochloric acid reacts with sodium carbonate. (c) Carbon dioxide is passed through lime water. -Chemistry

Last Answer : i hope it helped you

(1) aluminium powder and ammonium nitrate Explanation: Ammonal is an explosive made up of ammonium nitrate and aluminium powder. The ammonium nitrate functions as an oxidizer and the aluminium as fuel. The use of the relatively cheap ammonium nitrate and aluminium makes it a replacement for pure TNT. The mixture is affected by humidity because ammonium nitrate is highly hygroscopic. Ammonal is not easily detonated, requiring a fairly substantial shock, though it is still more sensitive than trinitrotoluene and composition C4.

Description : (1) aluminium powder and ammonium nitrate Explanation: Ammonal is an explosive made up of ammonium nitrate and aluminium powder. The ammonium nitrate functions as an oxidizer and the aluminium ... a fairly substantial shock, though it is still more sensitive than trinitrotoluene and composition C4.

Last Answer : Gelatin is mostly used in making icecreams in order to - (1) prevent making a colloid (2) stabilise the colloid and prevent crystallisation (3) stabilise mixture (4) enrich the aroma

In silvery paints, the main constituent present is - (1) Aluminium powder (2) Silver powder (3) Lead powder (4) White lead

Description : In silvery paints, the main constituent present is - (1) Aluminium powder (2) Silver powder (3) Lead powder (4) White lead

Last Answer : (1) Aluminium powder Explanation: In silvery paints, the main constituent is aluminium powder.

What is a mixture of potassium nitrate powdered charcoal and sulphur called? (1) paint (2) aluminium (3) brass (4) gun powder

Description : What is a mixture of potassium nitrate powdered charcoal and sulphur called? (1) paint (2) aluminium (3) brass (4) gun powder

Last Answer : (4) gun powder Explanation: Gun powder is the mixture of potassium nitrate powdered charcoal and sulphur.

In silvery paints, the main constituent present is (1) Aluminium powder (2) Silver powder (3) Lead powder (4) White lead

Description : In silvery paints, the main constituent present is (1) Aluminium powder (2) Silver powder (3) Lead powder (4) White lead

Last Answer : Aluminium powder

The chemical name of "Plaster of Paris" commonly used for setting broken bones is – (1) Calcium nitrate (2) Calcium sulphate (3) Calcium carbonate (4) Calcium chloride

Description : The chemical name of "Plaster of Paris" commonly used for setting broken bones is – (1) Calcium nitrate (2) Calcium sulphate (3) Calcium carbonate (4) Calcium chloride

Last Answer : (2) Calcium sulphate Explanation: Plaster of Paris is the common name of Calcium Sulphate hemihydrate, with chemical formula: CaSO4.1/2H2O. Plaster of Paris is produced by heating gypsum to about 150°C.

The chemical name of “Plaster of Paris” commonly used for setting broken bones is (1) Calcium nitrate (2) Calcium sulphate (3) Calcium carbonate (4) Calcium chloride

Description : The chemical name of “Plaster of Paris” commonly used for setting broken bones is (1) Calcium nitrate (2) Calcium sulphate (3) Calcium carbonate (4) Calcium chloride

Last Answer :  Calcium sulphate

Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the tip diameter should be equal to t (where, t = plate thickness to be welded) (C) In spot welding, two pieces to be joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Description : Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the ... joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Last Answer : (D) Mild steel sheet cannot be spot welded

We have some pieces of metals that have been “powder coated”, how does that work?

Description : We have some pieces of metals that have been “powder coated”, how does that work?

Last Answer : Powder coatings are similar to paint, but they are usually much more durable. Rather than adding a solvent to the pigments and resins in paint, as is typically the case, powder coatings are applied ... at high temperatures, and the pigment and resins pieces melt and form a durable, color layer.

Statement-I : Thermite mixture `Fe_(2)O_(3) +Al` (powder) is used in the welding. Statement-II : Al is a good reductant.

Description : Statement-I : Thermite mixture `Fe_(2)O_(3) +Al` (powder) is used in the welding. Statement-II : Al is a good reductant.

Last Answer : Statement-I : Thermite mixture `Fe_(2)O_(3) +Al` (powder) is used in the welding. Statement-II : Al is a good reductant.

In AT welding process what is the role of asbestos powder & slag ? (i) To separate closing pin from portion* (ii) To hold the portion (iii) Both above are correct (iv) None of the above

Description : In AT welding process what is the role of asbestos powder & slag ? (i) To separate closing pin from portion* (ii) To hold the portion (iii) Both above are correct (iv) None of the above

Last Answer : (i) To separate closing pin from portion*

In AT welding process what is the role of closing pin ? (i) To hold the portion before melt (ii) To hold the asbestos powder & slag (iii) Both above are correct* (iv) None of the above

Description : In AT welding process what is the role of closing pin ? (i) To hold the portion before melt (ii) To hold the asbestos powder & slag (iii) Both above are correct* (iv) None of the above

Last Answer : (iii) Both above are correct*

What will happen if slag is not used above the layer of asbestos powder? (i) Auto tapping* (ii) High welding (iii) Low welding (iv) Nothing will happen

Description : What will happen if slag is not used above the layer of asbestos powder? (i) Auto tapping* (ii) High welding (iii) Low welding (iv) Nothing will happen

Last Answer : (i) Auto tapping*

Foul odour and bad taste of water is removed by treating with (A) Alum (B) Bleaching powder (C) Activated carbon (D) Copper sulphate

Description : Foul odour and bad taste of water is removed by treating with (A) Alum (B) Bleaching powder (C) Activated carbon (D) Copper sulphate

Last Answer : (C) Activated carbon

Most widely and commonly used coagulant for the removal of suspended impurities in water is (A) Bleaching powder (B) Slaked lime (C) Alum (D) Copper sulphate

Description : Most widely and commonly used coagulant for the removal of suspended impurities in water is (A) Bleaching powder (B) Slaked lime (C) Alum (D) Copper sulphate

Last Answer : (C) Alum

The most widely used coagulant for removing suspended impurities from water is (A) Bleaching powder (B) Chlorine (C) Calcium sulphate (D) Alum

Description : The most widely used coagulant for removing suspended impurities from water is (A) Bleaching powder (B) Chlorine (C) Calcium sulphate (D) Alum

Last Answer : (D) Alum

For controlling algae, the most commonly used chemical, is (A) Copper sulphate (B) Alum (C) Lime (D) Bleaching powder

Description : For controlling algae, the most commonly used chemical, is  (A) Copper sulphate  (B) Alum  (C) Lime  (D) Bleaching powder 

Last Answer : (A) Copper sulphate 

To control the growth of algae in reservoirs, the compound which is used, is (A) Bleaching powder (B) Copper sulphate (C) Lime solution(D) Alum solution

Description : To control the growth of algae in reservoirs, the compound which is used, is  (A) Bleaching powder  (B) Copper sulphate  (C) Lime solution (D) Alum solution 

Last Answer : (B) Copper sulphate

When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Description : When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Last Answer : Answer: B

Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded to the board may come loosened from the board. C. The circuit board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Description : Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded ... board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Last Answer : Answer: B

How should excess solder be removed from a hot soldering iron?

Description : How should excess solder be removed from a hot soldering iron?

Last Answer : By use of a cleaning cloth.

Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Description : Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Last Answer : Parts Insulating Materials  Insulation between heating element and base plate of electric iron. Mica Insulation used over copper or aluminium conductor used for making coils.  ... Transformer bushings Porcelain  Insulation between transmission line and pole. Porcelain

Name the material which is separated from molten steel during chemical reaction of A.T welding? (i) Aluminium oxide (slag). * (ii) Ferrous Oxide (iii) Aluminium (iv) Ferrous

Description : Name the material which is separated from molten steel during chemical reaction of A.T welding? (i) Aluminium oxide (slag). * (ii) Ferrous Oxide (iii) Aluminium (iv) Ferrous

Last Answer : (i) Aluminium oxide (slag). *

If you built a Solstice bonfire to burn up all the broken useless pieces of the old year, what would throw in it?

Description : If you built a Solstice bonfire to burn up all the broken useless pieces of the old year, what would throw in it?

Last Answer : I wish Covid and Cancer were the biggest flames you ever saw.

I am broken and apart, all my pieces are in tatters. They lie about unorganized, as if nothing matters. Like humpty dumpty all I want is all my pieces fixed. Yet when you start to help me, your feelings might be mixed. To some I am relaxing, to others I bring anger. To see my original form, you need only look at my chamber. What am I? -Riddles

Description : I am broken and apart, all my pieces are in tatters. They lie about unorganized, as if nothing matters. Like humpty dumpty all I want is all my pieces fixed. Yet when you start to help me, your feelings ... I bring anger. To see my original form, you need only look at my chamber. What am I? -Riddles

Last Answer : Jigsaw puzzle

Is broken pieces a sign that chemical change has occurred?

Description : Is broken pieces a sign that chemical change has occurred?

Last Answer : Not really. A broken glass is still glass; no chemical changehas occurred. But it is physically different, so it is better tosay a physical change happened.

When manipulating the broken egg shell pieces what occured in the area of the crack when two pieces were pulled or pushed apart?

Description : When manipulating the broken egg shell pieces what occured in the area of the crack when two pieces were pulled or pushed apart?

Last Answer : What is the answer ?

Are rocks at Earth's surface are broken down into smaller pieces a part of the rock cycle?

Description : Are rocks at Earth's surface are broken down into smaller pieces a part of the rock cycle?

Last Answer : this is a question

The rocks gets broken in pieces due to temperature is called

Description : The rocks gets broken in pieces due to temperature is called

Last Answer : Ans. Exfoliation

The major constituent of laminate of safety glass, which holds the broken glass, pieces in their places during accident (and thus minimises the danger from flying glass fragments) is(A) Polyvinyl alcohol(B) Polyvinyl acetate(C) Polyvinyl butyral(D) PVC

Description : The major constituent of laminate of safety glass, which holds the broken glass, pieces in their places during accident (and thus minimises the danger from flying glass fragments) is (A) Polyvinyl alcohol (B) Polyvinyl acetate (C) Polyvinyl butyral (D) PVC

Last Answer : (C) Polyvinyl butyral

Why are broken glass pieces or cullets added during the manufacture of glass?

Description : Why are broken glass pieces or cullets added during the manufacture of glass?

Last Answer : Pieces of broken glass are added to increase fusibility and to recycle broken glass pieces.

A child accidentally drops a square ceramic tile. It breaks into smaller pieces as shown in Figure P. To avoid a scolding, she plans to compose a mural of broken pieces to gift to her mother. Which figure out of the given options could she make?

Description : A child accidentally drops a square ceramic tile. It breaks into smaller pieces as shown in Figure P. To avoid a scolding, she plans to compose a mural of broken pieces to gift to her mother. Which figure out of the given options could she make?

Last Answer : C