Description : Under the _____________, both internal and external corporate governance mechanisms are intended to induce managerial actions that maximize profit and A. shareholder value. B. Shareholder theory. C. Agency theory. D. Stakeholder theory. E. Corporate governance theory
Last Answer : A. shareholder value.
Description : The major sources of ideas for product development comes from A. internal sources B. external sources C. product lines extension D. both a and b
Last Answer : D. both a and b
Description : The definition of ________ prices is: In considering an observed price, consumers often compare it to an internal memory reference price or an external frame of reference (such as a posted regular retail price ) ... B. Reference C. Promotional D. Everyday low price E. None of the above
Last Answer : B. Reference
Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°
Last Answer : Answer: Option B
Description : In a thick cylindrical shell subjected to an internal pressure (p), the radial stress across the thickness of a cylinder is a) maximum at the outer surface and minimum at the inner surface b) maximum ... and zero at the outer surface d) maximum at the outer surface and zero at the inner surface
Last Answer : c) maximum at the inner surface and zero at the outer surface
Description : The resultant axial force on bolt depends upon (A) Initial tension (B) External applied load (C) Stiffness of bolt and parts held by bolt (D) All three factors
Last Answer : (D) All three factors
Description : Which one of the following types of compressor is mostly used for supercharging of IC engines? (a) Radial flow compressor (b) Axial flow compressor (c) Root blower (d) Reciprocating compressor
Last Answer : Ans : c
Description : Compressor mostly used for supercharging of IC engine is A. Radial flow compressor B. Axial flow compressor C. Root blower compressor D. Reciprocating compressor
Last Answer : ANSWER : A
Description : Which one of the following type of compressor is mostly used for supercharging of I.C engine A. Radial flow compressor B. Axial flow compressor C. Root blower D. Reciprocating compressor.
Last Answer : ANSWER : C
Description : Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with ... l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)
Last Answer : (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow
Description : Tapered roller bearings can take (a) radial load only (b) axial load only (c) both radial and axial loads and the ratio of these being greater than unity (d) both radial and axial loads and the ratio of these being less than unity
Last Answer : (c) both radial and axial loads and the ratio of these being greater than unity
Description : Load acting on bearing in its plane of rotation is called as a... A. Radial load B. Axial load C. Perpendicular load D. Thrust load
Last Answer : A. Radial load
Description : The tapered roller bearings can take (a) radial load only (b) axial load only (c) both radial and axial loads (d) none of the mentioned
Last Answer : (c) both radial and axial loads
Description : Match List-I (Type of Anti-friction bearing) with List-II (Specific Use) and select the using the code given below the Lists: [IES-2006] List-I List -II A. Self-aligning ball bearing 1. For pure axial load B. Taper roller bearing 2. For ... C D (a) 2 1 3 4 (b) 3 4 2 1 (c) 2 4 3 1 (d) 3 1 2 4
Last Answer : (c) 2 4 3 1
Description : Consider the following pairs of types of bearings and applications: 1. Partial Journal bearing................... Rail wagon axles 2. Full journal bearing ......................Diesel engine crank-shaft 3. Radial bearing ... matched? [IES-2000] (a) 1 alone (b) 1 and 2 (c) 2 and 3 (d) 1, 2 and 3
Last Answer : (b) 1 and 2
Description : A journal bearing is a ______ contact bearing working on the hydrodynamic lubrication and which supports load in____ direction. a) Sliding, Axial b) Rolling, Radial c) Sliding, Radial d) Rolling, Axial
Last Answer : c) Sliding, Radial
Description : Woodruff key permits _____ movement b/w shaft and the hub. a) Axial b) Radial c) Eccentric d) None of the listed
Last Answer : b) Radial
Description : Higher specific speed (200-500) of a centrifugal pump indicates that the pump is of __________ flow type. (A) Axial (B) Radial (C) Mixed (D) None of these
Last Answer : (A) Axial
Description : A mixed flow centrifugal pump (A) Employs such an impeller, through which the flow is a combination of radial & axial flow (B) Mixes the two fluids before pumping them (C) Pumps the two fluids separately and then mixes them (D) Employs impellers in both the radial & axial directions
Last Answer : (A) Employs such an impeller, through which the flow is a combination of radial & axial flow
Description : Propellers are (A) Axial flow mixers (B) Low speed impeller (C) Used for mixing liquids of high viscosity (D) Radial flow mixers
Last Answer : (A) Axial flow mixers
Description : Hallow cone nozzle – liquid is fed into whirl chamber through entry or through a fixed spiral passage to give rotation motion. a. Axial b. Radial c. tangential. d. None of above
Last Answer : Ans- c. tangential.
Description : When the helical compression spring is subjected to axial compressive force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress
Last Answer : (D) Torsional shear stress
Description : When the helical extension spring is subjected to axial tensile force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress
Description : A diagram which shows the variations of the axial load for all sections of the span of a beam, is called (A) Bending moment diagram (B) Shear force diagram (C) Thrust diagram (D) Stress diagram
Last Answer : Answer: Option C
Description : The graphical representation of variation of axial load on y axis and position of cross section along x axis is called as _____ (a) Bending moment diagram (b) Shear force diagram (c) Stress-strain diagram (d) Trust diagram
Last Answer : (d) Trust diagram
Description : A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is connected to the source. Maximum power dissipated in the load is (A) 300 W (B) 150 W (C) 45 W (D) 20 W
Last Answer : A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is connected to the source. Maximum power dissipated in the load is 150 W
Description : When Mercedes-Benz targets the world’s well-to-do, regardless of their country, they are most likely following a segmentation strategy called: A. external segmentation. B. international segmentation. C. enriched segmentation. D. intermarket segmentation.
Last Answer : D. intermarket segmentation.
Description : ____________________ is forming segments of consumers who have similar needs and buying behavior even though they are located in different countries. A. External segmentation B. International segmentation C. Intermarket segmentation D. Enriched segmentation
Last Answer : C. Intermarket segmentation
Description : The process of collecting information about the external marketing environment is A. Environmental management B. Environmental scanning C. Marketing management D. Marketing research
Last Answer : B
Description : Robert is a marketer for a global consumer products company. He is working on the promotional campaign designed to reach a target audience in a new international market. Robert is working ... A. Socio-cultural environment B. Competitive environment C. Economic environment D. Legal environment
Last Answer : A. Socio-cultural environment
Description : Which of the following is NOT part of the external marketing environment? A. Political B. Legal C. Product D. Socio-cultural
Last Answer : C. Product
Description : Bending stress in graduated length leaves are more than that in full length leaves. (a) Yes (b) No (c) In some cases (d) Can’t be stated
Last Answer : (b) No
Description : Factor of safety is a. Tensile stress / Permissible stress b. Compressive stress / Ultimate stress c. Ultimate stress / Permissible stress d. Ultimate stress / Shear stress
Last Answer : c. Ultimate stress / Permissible stress
Description : Following are the basic types of stress except (a)Tensile stress (b)Compressive stress (c)Shear stress (d)Volumetric stress
Last Answer : (d)Volumetric stress
Description : What are the questions you need to ask yourself while you are assessing yourself for stress A. Where do you feel stress in your body B. How do you know when you are stress C. How do you react to stress D. All of the above
Last Answer : D. All of the above
Description : The following are true about the effects of stress A. Hair loss and baldness B. Spasmodic pains in the neck and shoulders C. Hypertension D. All of the above
Description : Aches, shallow breathing and sweating, frequent colds are A. Physical symptoms of stress B. Behavioural symptoms of stress C. Emotional symptoms of stress D. Cognitive symptoms of stress
Last Answer : A. Physical symptoms of stress
Description : The following are true about the behavioural symptoms of stress A. The subject’s starts eating more or less B. The subject starts sleeping more or less C. The subject isolates himself/herself from others D. All of the above
Description : Which of the following statements is true A. Moodiness is a cognitive symptom of stress B. Moodiness is an emotional symptom of stress C. Poor judgement is an emotional symptom of stress D. Agitation is cognitive symptom of stress
Last Answer : B. Moodiness is an emotional symptom of stress
Description : The symptoms of stress can be divided in to the following categories A. Cognitive B. Emotional C. Physical D. All of the above
Description : What thoughts come to the mind when you’re under negative stress A. You think that you can cope with the situation B. You think that you cannot cope with the situation C. You think that everything will get fine eventually D. You think that you will get hep immediately
Last Answer : B. You think that you cannot cope with the situation
Description : Which of the following statements is true A. Habitual behaviour patterns like over scheduling, procrastination, etc. Can cause negative stress B. Thoughts like fear, worrying about future etc. can cause negative stress C. Both ‘A’ & ‘B’ are true D. None of the above
Last Answer : C. Both ‘A’ & ‘B’ are true
Description : Which of the following statements is true A. Positive stress is short-term B. Negative stress can be short or long-term C. Negative stress can lead to mental as well as physical problems D. Negative stress is perceived within our coping abilities
Last Answer : D. Negative stress is perceived within our coping abilities
Description : The following are the characteristics of Negative Stress A. It causes anxiety B. It feels unpleasant C. It decreases performance D. All of the above
Description : The following are the characteristics of Positive Stress A. It improves performance B. It feels exciting C. It motivates D. All of the above
Description : Which of the following are the basic sources of stress A. The Environment B. Social Stressors C. Physiological D. Thoughts E. All of the above
Last Answer : E. All of the above
Description : Which of the following statements is true about stress management A. Stress management is learning about the connection between mind and body B. Stress management helps us control our health in a positive sense C. ... management teaches us to avoid all kinds of stress D. Only A' & B' are right
Last Answer : D. Only ‘A’ & ‘B’ are right
Description : Stress management is about learning A. How to avoid the pressures of life B. How to develop skills that would enhance our body’s adjustment when we are subjected to the pressures of life C. Both ‘A’ & ‘B’ are true D. None of the above
Last Answer : B. How to develop skills that would enhance our body’s adjustment when we are subjected to the pressures of life
Description : Which of the following statements is true A. In small quantities, stress is good B. Too much stress is harmful C. All stress is bad D. Only ‘A’ & ‘B’ are right