Bending stress in graduated length leaves are more than that in full length leaves. (a) Yes (b) No (c) In some cases (d) Can’t be stated

Bending stress in graduated length leaves are more than that in full length leaves. (a) Yes (b) No (c) In some cases (d) Can’t be stated
by

1 Answer

Answer :

(b) No
by

Related questions

Bending stress in graduated length leaves are more than that in full length leaves. a) Yes b) No c) In some cases d) Can’t be stated

Description : Bending stress in graduated length leaves are more than that in full length leaves. a) Yes b) No c) In some cases d) Can’t be stated

Last Answer : b) No

A leaf spring consists of 3 extra full length leaves and 14 graduated length leaves. The maximum force that can act on the spring is 70kN and the distance between eyes of the spring is 1.2m. Width and thickness of the leaves are 100mm and 12mm respectively. Calculate the initial pre load required to close the nip. (a) 4332.2N (b) 4674.1N (c) 4985.4N (d) Can’t be determined

Description : A leaf spring consists of 3 extra full length leaves and 14 graduated length leaves. The maximum force that can act on the spring is 70kN and the distance between eyes of the spring is 1.2m. Width and thickness of the ... close the nip. (a) 4332.2N (b) 4674.1N (c) 4985.4N (d) Can't be determined

Last Answer : (b) 4674.1N

All welding processes require pressure along with heat. a) Yes b) No, fusion doesn’t require c) Can’t be stated d) None of the listed

Description : All welding processes require pressure along with heat. a) Yes b) No, fusion doesn’t require c) Can’t be stated d) None of the listed

Last Answer : b) No, fusion doesn’t require

Can the holder of a negotiable instrument indorsed in blank convert the indorsement into an indorsement in full? A. No, such a conversion is not possible under the Negotiable Instruments Act, 1881 (Section 49) B. Yes, the holder can, without signing his own name, and by writing above the indorser's signature a direction to pay to any other person as indorsee, convert the indorsement in blank into an indorsement in full (Section 49) C. Yes, the holder can by signing his own name and by writing above the indorser's signature a direction to pay to any other person as indorsee, convert the indorsement in blank to an indorsement in full (Section 49) D. None of the above.

Description : Can the holder of a negotiable instrument indorsed in blank convert the indorsement into an indorsement in full? A. No, such a conversion is not possible under the Negotiable Instruments Act, 1881 (Section ... the indorsement in blank to an indorsement in full (Section 49) D. None of the above.

Last Answer : C. Yes, the holder can by signing his own name and by writing above the indorser's signature a direction to pay to any other person as indorsee, convert the indorsement in blank to an indorsement in full (Section 49)

The angular play bearing must be mounted without axial play. a) Yes b) Little tolerance is adjusted c) Little tolerance is necessary d) Can’t be stated

Description : The angular play bearing must be mounted without axial play. a) Yes b) Little tolerance is adjusted c) Little tolerance is necessary d) Can’t be stated

Last Answer : a) Yes

________ is stated as a budget which is made to change as per the levels of activity attained. A. Fixed budget B. Flexible budget C. Both a and b D. None of the above

Description : ________ is stated as a budget which is made to change as per the levels of activity attained. A. Fixed budget B. Flexible budget C. Both a and b D. None of the above

Last Answer : B. Flexible budget

The management accounting can be stated an extension of (i) Cost Accounting (ii) Financial Accounting (iii) Responsibility Accounting A. Both (i) and (ii) B. Both (i) and (iii) C. Both (ii) and (iii) D. (i), (ii), (iii)

Description : The management accounting can be stated an extension of (i) Cost Accounting (ii) Financial Accounting (iii) Responsibility Accounting A. Both (i) and (ii) B. Both (i) and (iii) C. Both (ii) and (iii) D. (i), (ii), (iii)

Last Answer : D. (i), (ii), (iii)

If in an instrument the amount undertaken or ordered to be paid is stated differently in figures and in words A. The instrument is void due to uncertainty B. The amount stated in figure shall be the amount undertaken or ordered to be paid C. The amount stated in words shall be the amount undertaken or ordered to be paid D. None of the above.

Description : If in an instrument the amount undertaken or ordered to be paid is stated differently in figures and in words A. The instrument is void due to uncertainty B. The amount stated in figure shall be ... amount stated in words shall be the amount undertaken or ordered to be paid D. None of the above.

Last Answer : A. The instrument is void due to uncertainty

A leaf spring consists of 3 extra full length leaves and 14 graduated length leaves. The maximum force that can act on the spring is 70kN and the distance between eyes of the spring is 1.2m. Width and thickness of the leaves are 100mm and 12mm respectively. If modulus of elasticity is 207000N/mm², calculate the initial nip. (a) 26.8mm (b) 24.9mm (c) 22.5mm (d)23.1mm

Description : A leaf spring consists of 3 extra full length leaves and 14 graduated length leaves. The maximum force that can act on the spring is 70kN and the distance between eyes of the spring is 1.2m. Width and thickness of the ... /mm², calculate the initial nip. (a) 26.8mm (b) 24.9mm (c) 22.5mm (d)23.1mm

Last Answer : b) 24.9mm

Does the WTO apply its framework in exactly the same fashion throughout the world? A. Yes, the WTO applies its framework in exactly the same way throughout the world B. Yes, the WTO applies its framework in exactly the same way around the world, unless it deals with trade blocks C. No, the WTO makes allowance for regional variation D. No, the WTO makes allowance for variation in the case of economically stronger countries

Description : Does the WTO apply its framework in exactly the same fashion throughout the world? A. Yes, the WTO applies its framework in exactly the same way throughout the world B. Yes, the WTO ... variation D. No, the WTO makes allowance for variation in the case of economically stronger countries

Last Answer : C. No, the WTO makes allowance for regional variation

Does the WTO come with its own institutional framework? A. No, the WTO depends on the relevant frameworks of national governments B. No, the WTO provides certain institutional arrangements but only on an ad hoc basis C. Yes, the WTO provides a certain institutional framework which changes depending on the nature of free trade agreements D. Yes, the WTO provides a common institutional framework for the implementation of free trade agreements

Description : Does the WTO come with its own institutional framework? A. No, the WTO depends on the relevant frameworks of national governments B. No, the WTO provides certain institutional arrangements ... Yes, the WTO provides a common institutional framework for the implementation of free trade agreements

Last Answer : D. Yes, the WTO provides a common institutional framework for the implementation of free trade agreements

A bill is drawn payable to 'A' or order. 'A' indorses it to 'B', the indorsement not containing the words '"or order" or any equivalent words. Can 'B' negotiate the instrument? A. Yes B. No C. Not always D. None of the above.

Description : A bill is drawn payable to 'A' or order. 'A' indorses it to 'B', the indorsement not containing the words '"or order" or any equivalent words. Can 'B' negotiate the instrument? A. Yes B. No C. Not always D. None of the above.

Last Answer : A. Yes

XYZ company conducted an AGM on 1st September 2007. On that day due to fire accident in the hall. All shareholders died. Will the company be in existence? A. Yes B. No

Description : XYZ company conducted an AGM on 1st September 2007. On that day due to fire accident in the hall. All shareholders died. Will the company be in existence? A. Yes B. No

Last Answer : A. Yes

There is a problem of alignment in deep groove ball bearings. (a) Yes (b) No, it is self-aligning (c) It aligns itself only in some particular cases (d) Can’t be determined

Description : There is a problem of alignment in deep groove ball bearings. (a) Yes (b) No, it is self-aligning (c) It aligns itself only in some particular cases (d) Can’t be determined

Last Answer : (a) Yes

There is problem of alignment in deep groove ball bearings. a) Yes b) No, it is self-aligning c) It aligns itself only in some particular cases d) Can’t be determined

Description : There is problem of alignment in deep groove ball bearings. a) Yes b) No, it is self-aligning c) It aligns itself only in some particular cases d) Can’t be determined

Last Answer : a) Yes

Identify the statement that is consistent with utilitarian ethical theory: A. Adhering to a set of principles may well forbid an act that would otherwise provide overall net good consequences. B. No act is ever morally right or wrong in all cases, in every situation. It will all depend on the act's consequences. C. Some actions like murder, theft, rape, and lying are wrong of their very nature, the kind of acts they are. No amount of n

Description : Identify the statement that is consistent with utilitarian ethical theory: A. Adhering to a set of principles may well forbid an act that would otherwise provide overall net good consequences. B. No act is ever ... lying are wrong of their very nature, the kind of acts they are. No amount of n

Last Answer : B. No act is ever morally right or wrong in all cases, in every situation. It will all depend on the act's consequences.

Identify the statement that is consistent with utilitarian ethical theory: A. Adhering to a set of principles may well forbid an act that would otherwise provide overall net good consequences. B. No act is ever morally right or wrong in all cases, in every situation. It will all depend on the act's consequences. C. Some actions like murder, theft, rape, and lying are wrong of their very nature, the kind of acts they are. No amount of net good consequences could ever justify them. D. The end never justifies the means.

Description : Identify the statement that is consistent with utilitarian ethical theory: A. Adhering to a set of principles may well forbid an act that would otherwise provide overall net good consequences. B. No ... amount of net good consequences could ever justify them. D. The end never justifies the means.

Last Answer : B. No act is ever morally right or wrong in all cases, in every situation. It will all depend on the act's consequences.

The initial gap between the extra full-length leaf and the graduated-length leaf before the assembly, is called as (A) clearance (B) nip (C) gap

Description : The initial gap between the extra full-length leaf and the graduated-length leaf before the assembly, is called as (A) clearance (B) nip (C) gap

Last Answer : (B) nip

Nipping is defined as leaving the gap between full length leaf and graduated length leaf. a) True b) False

Description : Nipping is defined as leaving the gap between full length leaf and graduated length leaf. a) True b) False

Last Answer : b) False

Nip is the initial gap between extra full length leaf and the graduated length leaf before the assembly. a) True b) False

Description : Nip is the initial gap between extra full length leaf and the graduated length leaf before the assembly. a) True b) False

Last Answer : a) True

The following are true about the behavioural symptoms of stress A. The subject’s starts eating more or less B. The subject starts sleeping more or less C. The subject isolates himself/herself from others D. All of the above

Description : The following are true about the behavioural symptoms of stress A. The subject’s starts eating more or less B. The subject starts sleeping more or less C. The subject isolates himself/herself from others D. All of the above

Last Answer : D. All of the above

A fluid in equilibrium can't sustain (A) Tensile stress (B) Compressive stress (C) Shear stress (D) Bending stress

Description : A fluid in equilibrium can't sustain (A) Tensile stress (B) Compressive stress (C) Shear stress (D) Bending stress

Last Answer : Answer: Option C

The ratio of the length and diameter of a simply supported uniform circular beam which experiences maximum bending stress equal to tensile stress due to same load at its mid span, is (A) 1/8 (B) 1/4 (C) 1/2 (D) 1/3

Description : The ratio of the length and diameter of a simply supported uniform circular beam which  experiences maximum bending stress equal to tensile stress due to same load at its mid span, is  (A) 1/8  (B) 1/4  (C) 1/2  (D) 1/3 

Last Answer : (C) 1/2 

The ratio of the length and depth of a simply supported rectangular beam which experiences maximum bending stress equal to tensile stress, due to same load at its mid span, is (A) 1/2 (B) 2/3 (C) 1/4 (D) 1/3

Description : The ratio of the length and depth of a simply supported rectangular beam which experiences  maximum bending stress equal to tensile stress, due to same load at its mid span, is  (A) 1/2  (B) 2/3  (C) 1/4  (D) 1/3

Last Answer : (B) 2/3 

The cross sections of the beams of equal length are a circle and a square whose permissible bending stress is same under same maximum bending. The ratio of their flexural weights is, (A) 1.118 (B) 1.338 (C) 1.228 (D) 1.108

Description : The cross sections of the beams of equal length are a circle and a square whose permissible bending stress is same under same maximum bending. The ratio of their flexural weights is, (A) 1.118 (B) 1.338 (C) 1.228 (D) 1.108

Last Answer : (A) 1.118

If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg

Description : If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg

Last Answer : (B) 250 kg

If the average bending stress is 6 kg/cm2 for M 150 grade concrete, the length of embedment of a bar of diameter d according to I.S. 456 specifications, is (A) 28 d (B) 38 d (C) 48 d (D) 58 d

Description : If the average bending stress is 6 kg/cm2 for M 150 grade concrete, the length of embedment of a bar of diameter d according to I.S. 456 specifications, is (A) 28 d (B) 38 d (C) 48 d (D) 58 d

Last Answer : Answer: Option D

Factor of safety is a. Tensile stress / Permissible stress b. Compressive stress / Ultimate stress c. Ultimate stress / Permissible stress d. Ultimate stress / Shear stress

Description : Factor of safety is a. Tensile stress / Permissible stress b. Compressive stress / Ultimate stress c. Ultimate stress / Permissible stress d. Ultimate stress / Shear stress

Last Answer : c. Ultimate stress / Permissible stress

Following are the basic types of stress except (a)Tensile stress (b)Compressive stress (c)Shear stress (d)Volumetric stress

Description : Following are the basic types of stress except (a)Tensile stress (b)Compressive stress (c)Shear stress (d)Volumetric stress

Last Answer : (d)Volumetric stress

Stress is (a)External force (b)Internal resistive force (c)Axial force (d)Radial force

Description : Stress is (a)External force (b)Internal resistive force (c)Axial force (d)Radial forcee

Last Answer : (b)Internal resistive force

What are the questions you need to ask yourself while you are assessing yourself for stress A. Where do you feel stress in your body B. How do you know when you are stress C. How do you react to stress D. All of the above

Description : What are the questions you need to ask yourself while you are assessing yourself for stress A. Where do you feel stress in your body B. How do you know when you are stress C. How do you react to stress D. All of the above

Last Answer : D. All of the above

The following are true about the effects of stress A. Hair loss and baldness B. Spasmodic pains in the neck and shoulders C. Hypertension D. All of the above

Description : The following are true about the effects of stress A. Hair loss and baldness B. Spasmodic pains in the neck and shoulders C. Hypertension D. All of the above

Last Answer : D. All of the above

Aches, shallow breathing and sweating, frequent colds are A. Physical symptoms of stress B. Behavioural symptoms of stress C. Emotional symptoms of stress D. Cognitive symptoms of stress

Description : Aches, shallow breathing and sweating, frequent colds are A. Physical symptoms of stress B. Behavioural symptoms of stress C. Emotional symptoms of stress D. Cognitive symptoms of stress

Last Answer : A. Physical symptoms of stress

Which of the following statements is true A. Moodiness is a cognitive symptom of stress B. Moodiness is an emotional symptom of stress C. Poor judgement is an emotional symptom of stress D. Agitation is cognitive symptom of stress

Description : Which of the following statements is true A. Moodiness is a cognitive symptom of stress B. Moodiness is an emotional symptom of stress C. Poor judgement is an emotional symptom of stress D. Agitation is cognitive symptom of stress

Last Answer : B. Moodiness is an emotional symptom of stress

The symptoms of stress can be divided in to the following categories A. Cognitive B. Emotional C. Physical D. All of the above

Description : The symptoms of stress can be divided in to the following categories A. Cognitive B. Emotional C. Physical D. All of the above

Last Answer : D. All of the above

What thoughts come to the mind when you’re under negative stress A. You think that you can cope with the situation B. You think that you cannot cope with the situation C. You think that everything will get fine eventually D. You think that you will get hep immediately

Description : What thoughts come to the mind when you’re under negative stress A. You think that you can cope with the situation B. You think that you cannot cope with the situation C. You think that everything will get fine eventually D. You think that you will get hep immediately

Last Answer : B. You think that you cannot cope with the situation

Which of the following statements is true A. Habitual behaviour patterns like over scheduling, procrastination, etc. Can cause negative stress B. Thoughts like fear, worrying about future etc. can cause negative stress C. Both ‘A’ & ‘B’ are true D. None of the above

Description : Which of the following statements is true A. Habitual behaviour patterns like over scheduling, procrastination, etc. Can cause negative stress B. Thoughts like fear, worrying about future etc. can cause negative stress C. Both ‘A’ & ‘B’ are true D. None of the above

Last Answer : C. Both ‘A’ & ‘B’ are true

Which of the following statements is true A. Positive stress is short-term B. Negative stress can be short or long-term C. Negative stress can lead to mental as well as physical problems D. Negative stress is perceived within our coping abilities

Description : Which of the following statements is true A. Positive stress is short-term B. Negative stress can be short or long-term C. Negative stress can lead to mental as well as physical problems D. Negative stress is perceived within our coping abilities

Last Answer : D. Negative stress is perceived within our coping abilities

The following are the characteristics of Negative Stress A. It causes anxiety B. It feels unpleasant C. It decreases performance D. All of the above

Description : The following are the characteristics of Negative Stress A. It causes anxiety B. It feels unpleasant C. It decreases performance D. All of the above

Last Answer : D. All of the above

The following are the characteristics of Positive Stress A. It improves performance B. It feels exciting C. It motivates D. All of the above

Description : The following are the characteristics of Positive Stress A. It improves performance B. It feels exciting C. It motivates D. All of the above

Last Answer : D. All of the above

Which of the following are the basic sources of stress A. The Environment B. Social Stressors C. Physiological D. Thoughts E. All of the above

Description : Which of the following are the basic sources of stress A. The Environment B. Social Stressors C. Physiological D. Thoughts E. All of the above

Last Answer : E. All of the above

Which of the following statements is true about stress management A. Stress management is learning about the connection between mind and body B. Stress management helps us control our health in a positive sense C. Stress management teaches us to avoid all kinds of stress D. Only ‘A’ & ‘B’ are right

Description : Which of the following statements is true about stress management A. Stress management is learning about the connection between mind and body B. Stress management helps us control our health in a positive sense C. ... management teaches us to avoid all kinds of stress D. Only A' & B' are right

Last Answer : D. Only ‘A’ & ‘B’ are right

Stress management is about learning A. How to avoid the pressures of life B. How to develop skills that would enhance our body’s adjustment when we are subjected to the pressures of life C. Both ‘A’ & ‘B’ are true D. None of the above

Description : Stress management is about learning A. How to avoid the pressures of life B. How to develop skills that would enhance our body’s adjustment when we are subjected to the pressures of life C. Both ‘A’ & ‘B’ are true D. None of the above

Last Answer : B. How to develop skills that would enhance our body’s adjustment when we are subjected to the pressures of life

Which of the following statements is true A. In small quantities, stress is good B. Too much stress is harmful C. All stress is bad D. Only ‘A’ & ‘B’ are right

Description : Which of the following statements is true A. In small quantities, stress is good B. Too much stress is harmful C. All stress is bad D. Only ‘A’ & ‘B’ are right

Last Answer : D. Only ‘A’ & ‘B’ are right

Trademark can be used as domain name a. Yes b. No c. Yes in some cases d. None of the above

Description : Trademark can be used as domain name a. Yes b. No c. Yes in some cases d. None of the above

Last Answer : a. Yes

Consider the statement which is followed by two arguments (I) and (II): Statement: Should persons with criminal background be banned from contesting elections? Arguments: (I) Yes, it will decriminalize politics. (II) No, it will encourage the ruling party to file frivolous cases against their political opponents. (A) Only argument (I) is strong. (B) Only argument (II) is strong. (C) Both the arguments are strong. (D) Neither of the arguments is strong.

Description : Consider the statement which is followed by two arguments (I) and (II): Statement: Should persons with criminal background be banned from contesting elections? Arguments: (I) Yes, it will decriminalize ... strong. (C) Both the arguments are strong. (D) Neither of the arguments is strong.

Last Answer : (A) Only argument (I) is strong. 

The leaves of multi-leaf springs are subjected to (A) bending stress (B) shear stress (C) axial stress (D) all of the above

Description : The leaves of multi-leaf springs are subjected to (A) bending stress (B) shear stress (C) axial stress (D) all of the above

Last Answer : (A) bending stress

Service rules for college and university teachers should be in line with bureaucrats and executives. Do you support the statement? (a) More or less with some modifications (p) definitely not (c) Yes basically, but with major verification many cases (d) all of the above

Description : Service rules for college and university teachers should be in line with bureaucrats and executives. Do you support the statement? (a) More or less with some modifications (p) definitely not (c) Yes basically, but with major verification many cases (d) all of the above

Last Answer : (d) all of the above

Fitted bearing must be partial bearing. a) True b) No c) No lubricating space is required d) Can’t be stated

Description : Fitted bearing must be partial bearing. a) True b) No c) No lubricating space is required d) Can’t be stated

Last Answer : a) True

The ________ of the product mix refers to how closely related the various product lines are in end use, production requirements, distribution channels, or some other way. A. Consistency B. Depth C. Width D. Length

Description : The ________ of the product mix refers to how closely related the various product lines are in end use, production requirements, distribution channels, or some other way. A. Consistency B. Depth C. Width D. Length

Last Answer : A. Consistency