Hooke's law states that A. the extension is proportional to the load when the elastic limit is not exceeded B. the extension is inversely proportional to the load when the elastic limit is not exceeded C. the extension is independent of the load when the elastic limit is not exceeded D. load is dependent on extension

Hooke's law states that

A. the extension is proportional to the load when the elastic limit is not exceeded

B. the extension is inversely proportional to the load when the elastic limit is not

exceeded

C. the extension is independent of the load when the elastic limit is not exceeded

D. load is dependent on extension
by

1 Answer

Answer :

the extension is proportional to the load when the elastic limit is not exceeded
by

Related questions

At ‘yield point’ of a copper wire A. the load hasn't exceeded the elastic limit yet; so, Hooke's law applies B. the load has already exceeded the elastic limit and the material has become plastic C. even the plastic stage has passed and the wire has snapped already D. Like Brass and Bronze, Copper has no yield poin

Description : At yield point' of a copper wire A. the load hasn't exceeded the elastic limit yet; so, Hooke's law applies B. the load has already exceeded the elastic limit and the material has become ... stage has passed and the wire has snapped already D. Like Brass and Bronze, Copper has no yield poin

Last Answer : the load has already exceeded the elastic limit and the material has become plastic

Hooke's law (A) Applies to elastic deformation (B) Applies beyond limit of proportionality in stress-strain curve (C) States that stress is inversely proportional to strain upto elastic limit (D) None of these

Description : Hooke's law (A) Applies to elastic deformation (B) Applies beyond limit of proportionality in stress-strain curve (C) States that stress is inversely proportional to strain upto elastic limit (D) None of these

Last Answer : (A) Applies to elastic deformation

What is Hooke's Law? (1) Stress is inversely proportional to strain. (2) Stress is directly proportional to strain. (3) Stress and strain are dependent on each other. (4) Stress and strain are independent of each other.

Description : What is Hooke's Law? (1) Stress is inversely proportional to strain. (2) Stress is directly proportional to strain. (3) Stress and strain are dependent on each other. (4) Stress and strain are independent of each other.

Last Answer : (2) Stress is directly proportional to strain. Explanation: Hooke's law is a principle of physics that states that the force (F) needed to extend or compress a spring by some distance X scales linearly with respect to that distance.

What is Hooke’s Law? (1) Stress is inversely proportional to strain. (2) Stress is directly proportional to strain. (3) Stress and strain are dependent on each other. (4) Stress and strain are independent of each other.

Description : What is Hooke’s Law? (1) Stress is inversely proportional to strain. (2) Stress is directly proportional to strain. (3) Stress and strain are dependent on each other. (4) Stress and strain are independent of each other.

Last Answer : (2) Stress is directly proportional to strain. Explanation: Hooke’s law is a principle of physics that states that the force (F) needed to extend or compress a spring by some distance X scales linearly with respect to that distance.

What is Hooke's Law? (1) Stress is inversely proportional to strain. (2) Stress is directly proportional to strain. (3) Stress and strain are dependent on each other. (4) Stress and strain are independent of each other.

Description : What is Hooke's Law? (1) Stress is inversely proportional to strain. (2) Stress is directly proportional to strain. (3) Stress and strain are dependent on each other. (4) Stress and strain are independent of each other.

Last Answer : (2) Stress is directly proportional to strain. Explanation: Hooke's law is a principle of physics that states that the force (F) needed to extend or compress a spring by some distance X scales linearly with respect to that distance.

If extension in spring is proportional to load applied, then material obeys A. Newton's law B. gravitational law C. Charles's law D. Hooke's law

Description : If extension in spring is proportional to load applied, then material obeys A. Newton's law B. gravitational law C. Charles's law D. Hooke's law

Last Answer : Hooke's law

The statement : stress is proportional to strain, i.e. the Hooke’s law holds good upto (a) Elastic Limit (b) Proportional Limit (c) Plastic Limit (d) Yield point

Description : The statement : stress is proportional to strain, i.e. the Hooke’s law holds good upto (a) Elastic Limit (b) Proportional Limit (c) Plastic Limit (d) Yield point

Last Answer : (b) Proportional Limit

Hooke's law states that stress and strain are (A) Directly proportional (B) Inversely proportional (C) Curvilinearly related (D) None of these

Description : Hooke's law states that stress and strain are (A) Directly proportional (B) Inversely proportional (C) Curvilinearly related (D) None of these

Last Answer : (A) Directly proportional

The law which states, "Within elastic limits strain produced is proportional to the stress producing it", is known as (A) Bernoulli's law (B) Stress law (C) Hooke's law (D) Poisson's law

Description : The law which states, "Within elastic limits strain produced is proportional to the stress producing  it", is known as  (A) Bernoulli's law  (B) Stress law  (C) Hooke's law  (D) Poisson's law

Last Answer : (C) Hooke's law 

Extension and applied force are A. directly proportional B. inversely proportional C. are independent of each otherD. inversely related

Description : Extension and applied force are A. directly proportional B. inversely proportional C. are independent of each other D. inversely related

Last Answer : inversely related

All materials obey Hooke's law within elastic limit. When elastic limit is reached, the tensile strain (A) Increases very quickly (B) Decreases very quickly (C) Increases in proportion to stress (D) Decreases in proportion to stress

Description : All materials obey Hooke's law within elastic limit. When elastic limit is reached, the tensile strain (A) Increases very quickly (B) Decreases very quickly (C) Increases in proportion to stress (D) Decreases in proportion to stress

Last Answer : (A) Increases very quickly

Every material obeys the Hooke's law within its (A) Elastic limit (B) Plastic point (C) Limit of proportionality (D) None of these

Description : Every material obeys the Hooke's law within its (A) Elastic limit (B) Plastic point (C) Limit of proportionality (D) None of these

Last Answer : (C) Limit of proportionality

Every material obeys the Hooke’s law within (a) Elastic limit (b) Plastic limit (c) Limit of proportionality (d) None of these

Description : Every material obeys the Hooke’s law within (a) Elastic limit (b) Plastic limit (c) Limit of proportionality (d) None of these

Last Answer : c) Limit of proportionality

Hooke’s law is applicable within (a)Elastic limit (b)Plastic limit (c)Fracture point (d) Ultimate strength

Description : Hooke’s law is applicable within (a)Elastic limit (b)Plastic limit (c)Fracture point (d) Ultimate strength

Last Answer : (a)Elastic limit

State Hooke’s Law of elasticity. Define Elastic limit.

Description : State Hooke’s Law of elasticity. Define Elastic limit.

Last Answer : Hooke’s Law:- Within elastic limit, stress is directly proportional to strain.  Elastic limit: -It is the maximum value of the stress upto which the body shows elasticity.

At yield point of a test piece, the material (A) Obeys Hooke's law (B) Behaves in an elastic manner (C) Regains its original shape on removal of the load(D) Undergoes plastic deformation

Description : At yield point of a test piece, the material  (A) Obeys Hooke's law  (B) Behaves in an elastic manner  (C) Regains its original shape on removal of the load  (D) Undergoes plastic deformation 

Last Answer : (D) Undergoes plastic deformation 

Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded

Description : Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded

Last Answer : E. Elastic limit was exceeded

Kepler's 3rd law states that... A. the periods of revolution of the planets are proportional to the cube of their mean distances from sun B. the periods of revolution of the planets are inversely proportional to the cube of their mean distances from sun C. the squares of the periods of revolution of the planets are proportional to the cube of their mean distance from sun D. the squares of the periods of revolution of the planets are inversely proportional to the cube of their mean distance from sun

Description : Kepler's 3rd law states that... A. the periods of revolution of the planets are proportional to the cube of their mean distances from sun B. the periods of revolution of the planets ... periods of revolution of the planets are inversely proportional to the cube of their mean distance from sun

Last Answer : the squares of the periods of revolution of the planets are proportional to the cube of their mean distance from sun

Boyle's law states that A. pressure of a gas is inversely proportional to its volume i.e. P × V = constant B. pressure of a gas is directly proportional to its volume i.e. P⁄V = constant C. pressure of a gas is inversely proportional to the square of its volume i.e. P × V² = constant D. pressure of a gas is directly proportional to the square of its volume i.e. P ⁄ V² = constant

Description : Boyle's law states that A. pressure of a gas is inversely proportional to its volume i.e. P V = constant B. pressure of a gas is directly proportional to its volume i.e. P⁄V = constant C. ... of a gas is directly proportional to the square of its volume i.e. P ⁄ V² = constant

Last Answer : pressure of a gas is inversely proportional to its volume i.e. P × V = constant

In the Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass is __________ the fluid viscosity. (A) Directly proportional to (B) Inversely proportional to (C) Inversely proportional to the square root of (D) Independent of

Description : In the Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass is __________ the fluid viscosity. (A) Directly proportional to (B) Inversely proportional to (C) Inversely proportional to the square root of (D) Independent of

Last Answer : (B) Inversely proportional to

Pick out the wrong statement. (A) The equivalent stiffness of two springs (of equal stiffness 'S') in series is S/2 while in parallel is 2S (B) For a helical spring, deflection is proportional to D3(D = mean coil diameter) or d4(d = wire diameter) (C) Crushing load or columns is less than the buckling load (D) Modulus of resilience is proportional to (stress at elastic limit)2

Description : Pick out the wrong statement. (A) The equivalent stiffness of two springs (of equal stiffness 'S') in series is S/2 while in parallel is 2S (B) For a helical spring, deflection is ... is less than the buckling load (D) Modulus of resilience is proportional to (stress at elastic limit)2

Last Answer : (C) Crushing load or columns is less than the buckling load

In a force-extension graph, force is taken along horizontal axis because A. force is independent variable B. extension is independent variable C. force is dependent variable D. all of abov

Description : In a force-extension graph, force is taken along horizontal axis because A. force is independent variable B. extension is independent variable C. force is dependent variable D. all of abov

Last Answer : force is independent variable

Pick up wrong statement about friction force for dry surfaces. Friction force is (A) Proportional to normal load between the surfaces (B) Dependent on the materials of contact surface (C) Proportional to velocity of sliding (D) Independent of the area of contact surfaces

Description : Pick up wrong statement about friction force for dry surfaces. Friction force is  (A) Proportional to normal load between the surfaces  (B) Dependent on the materials of contact surface  (C) Proportional to velocity of sliding  (D) Independent of the area of contact surfaces 

Last Answer : (C) Proportional to velocity of sliding 

Muller Breslau's principle for obtaining influence lines is applicable to (i) Trusses (ii) Statically determinate beams and frames (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law (iv) Any statically indeterminate structure The correct answer is (A) (i), (ii) and (iii) (B) (i), (ii) and (iv) (C) (i) and (ii) (D) Only (i)

Description : Muller Breslau's principle for obtaining influence lines is applicable to (i) Trusses (ii) Statically determinate beams and frames (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law (iv ... B) (i), (ii) and (iv) (C) (i) and (ii) (D) Only (i)

Last Answer : (A) (i), (ii) and (iii)

Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) The damping capacity of a material is due to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Description : Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) ... to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Last Answer : Option B

As per Gilliland's equation, the diffusivity is (A) Directly proportional to 'T 1.5 ' (B) Inversely proportional to 'P' (C) Dependent on the molecular volume & molecular weight of components (D) All 'a', 'b' & 'c'

Description : As per Gilliland's equation, the diffusivity is (A) Directly proportional to 'T 1.5 ' (B) Inversely proportional to 'P' (C) Dependent on the molecular volume & molecular weight of components (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

The friction factor is (A) Always inversely proportional to the Reynolds number (B) Not dimensionless (C) Not dependent on the roughness of the pipe (D) None of these

Description : The friction factor is (A) Always inversely proportional to the Reynolds number (B) Not dimensionless (C) Not dependent on the roughness of the pipe (D) None of these

Last Answer : (D) None of these

Bag filter design is predominantly dependent on gas temperature, as it affects the gas density & viscosity and the selection of filtering material. The pressure drop in a bag filter is (A) Inversely proportional to viscosity of gas (B) Proportional to the viscosity & density of the gas (C) Proportional to the pressure of the gas (D) Both (B) and (C)

Description : Bag filter design is predominantly dependent on gas temperature, as it affects the gas density & viscosity and the selection of filtering material. The pressure drop in a bag filter is (A) Inversely proportional to ... the gas (C) Proportional to the pressure of the gas (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

What Law states that the pressure of gas is inversely proportional to its volume at constant temperature?  a. Charles’ law  b. Gay-Lussac’s Law  c. Boyle’s Law  d. Dalton’s Law

Description : What Law states that the pressure of gas is inversely proportional to its volume at constant temperature?  a. Charles’ law  b. Gay-Lussac’s Law  c. Boyle’s Law  d. Dalton’s Law

Last Answer : Boyle’s Law

According to Newton's law of universal gravitation, any two particles of finite mass attract one another with a force which is A. Inversely proportional to the product of their masses and directly proportional to the square of their distance apart B. Inversely proportional to the product of their masses and directly proportional to their distance apart C. Directly proportional to the product of their masses and inversely proportional to their distance apart D. Directly proportional to the product of their masses and inversely proportional to the square of their distance apart

Description : According to Newton's law of universal gravitation, any two particles of finite mass attract one another with a force which is A. Inversely proportional to the product of their masses and ... the product of their masses and inversely proportional to the square of their distance apart

Last Answer : Directly proportional to the product of their masses and inversely proportional to the square of their distance apart

The frequency of vibration of a stretched string is _______ its length. (a) Directly proportional to (b) Inversely proportional to (c) Directly proportional to the square of (d) Independent of

Description : The frequency of vibration of a stretched string is _______ its length. (a) Directly proportional to (b) Inversely proportional to (c) Directly proportional to the square of (d) Independent of

Last Answer : Ans:(b)

In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. A equal to B directly proportional to C inversely proportional to D independent of

Description : In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. A equal to B directly proportional to C inversely proportional to D independent of

Last Answer : C inversely proportional to

In steady state forced vibrations, the amplitude of vibrations at resonance is __________ damping coefficient. A. Equal to B. Directly proportional to C. Inversely proportional toD. Independent of

Description : In steady state forced vibrations, the amplitude of vibrations at resonance is __________ damping coefficient. A. Equal to B. Directly proportional to C. Inversely proportional toD. Independent of

Last Answer : C. Inversely proportional to

n steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. a) equal to b) directly proportional to c) inversely proportional to d) independent of

Description : n steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. a) equal to b) directly proportional to c) inversely proportional to d) independent of

Last Answer : c) inversely proportional to

Maximum displacement due to forced vibration is ____________ the displacement due to static force. (A) inversely proportional to (B) directly proportional to (C) independent of (D) none of the above

Description : Maximum displacement due to forced vibration is ____________ the displacement due to static force. (A) inversely proportional to (B) directly proportional to (C) independent of (D) none of the above

Last Answer : (B) directly proportional to

In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. (A) equal to (B) directly proportional to (C) inversely proportional to (D) independent of

Description : In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. (A) equal to (B) directly proportional to (C) inversely proportional to (D) independent of

Last Answer : (C) inversely proportional to

In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. a) equal to b) directly proportional toc) inversely proportional to d) independent of

Description : In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. a) equal to b) directly proportional toc) inversely proportional to d) independent of

Last Answer : c) inversely proportional to

Half-life period for a first order reaction is __________ the initial concentration of the reactant. (A) Directly proportional to (B) Inversely proportional to (C) Independent of(D) None of these

Description : Half-life period for a first order reaction is __________ the initial concentration of the reactant. (A) Directly proportional to (B) Inversely proportional to (C) Independent of (D) None of these

Last Answer : (C) Independent of

Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of catalyst, if it doesnot entail a chain mechanism.(A) Proportional to(B) Independent of(C) Inversely proportional to(D) Proportional to the square o

Description : Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of ... to (B) Independent of (C) Inversely proportional to (D) Proportional to the square o

Last Answer : (A) Proportional to

At very high concentration of enzymes, the rate of fermentation chemical reaction is __________ the concentration of reactants. (A) Independent of (B) Directly proportional to (C) Inversely proportional to (D) Proportional to the square of

Description : At very high concentration of enzymes, the rate of fermentation chemical reaction is __________ the concentration of reactants. (A) Independent of (B) Directly proportional to (C) Inversely proportional to (D) Proportional to the square of

Last Answer : (A) Independent of

Time factor for a clay layer is (A) A dimensional parameter (B) Directly proportional to permeability of soil (C) Inversely proportional to drainage path (D) Independent of thickness of clay layer

Description : Time factor for a clay layer is (A) A dimensional parameter (B) Directly proportional to permeability of soil (C) Inversely proportional to drainage path (D) Independent of thickness of clay layer

Last Answer : (B) Directly proportional to permeability of soil

A fluid is termed as the Newtonian fluid, when the shear stress is __________ the velocity gradient. (A) Independent of (B) Inversely proportional to (C) Directly proportional to (D) None of these

Description : A fluid is termed as the Newtonian fluid, when the shear stress is __________ the velocity gradient. (A) Independent of (B) Inversely proportional to (C) Directly proportional to (D) None of these

Last Answer : (C) Directly proportional to

When a beam is subjected to a bending moment the strain in a layer is …………the distance from the neutral axis. (a) Independent of (b) Directly proportional to (c) Inversely proportional to (d) None of these

Description : When a beam is subjected to a bending moment the strain in a layer is …………the distance from the neutral axis. (a) Independent of (b) Directly proportional to (c) Inversely proportional to (d) None of these

Last Answer : (b) Directly proportional to

Rittinger's crushing law states that (A) Work required to form a particle of any size is proportional to the square of the surface to volume ratio of the product (B) Work required to form a particle of a particular size is proportional to the square root of the surface to volume ratio of the product (C) Work required in crushing is proportional to the new surface created (D) For a given machine and feed, crushing efficiency is dependent on the size of the feed & product

Description : Rittinger's crushing law states that (A) Work required to form a particle of any size is proportional to the square of the surface to volume ratio of the product (B) Work required to form a ... ) For a given machine and feed, crushing efficiency is dependent on the size of the feed & product

Last Answer : (C) Work required in crushing is proportional to the new surface created

Proportional to the distortion of the stress within the elastic limit. Whose formula is this?

Description : Proportional to the distortion of the stress within the elastic limit. Whose formula is this?

Last Answer : Proportion of stress distortion within the elastic limit. This is Robert Hooke's formula.

The limit beyond which the material does not behave elastically is known as (a) Proportional limit (b) Elastic limit (c) Plastic limit (d) Yield Point

Description : The limit beyond which the material does not behave elastically is known as (a) Proportional limit (b) Elastic limit (c) Plastic limit (d) Yield Point

Last Answer : (b) Elastic limit

The load shared by each spring is inversely proportional to the cross section of wire. a) Yes b) No, it is directly proportional c) It is proportional to its square d) It is proportional to its square root

Description : The load shared by each spring is inversely proportional to the cross section of wire. a) Yes b) No, it is directly proportional c) It is proportional to its square d) It is proportional to its square root

Last Answer : b) No, it is directly proportional

The life of a ball bearing is inversely proportional to (A) (Load)1 (B) (Load)2 (C) (Load)3 (D) (Load)0.33

Description : The life of a ball bearing is inversely proportional to (A) (Load)1 (B) (Load)2 (C) (Load)3 (D) (Load)0.33

Last Answer : (C) (Load)3

When two transformers are operating in parallel, they will share the load as under: (A) proportional to their impedances. (B) inversely proportional to their impedances. (C) 50% - 50% (D) 25%-75%

Description : When two transformers are operating in parallel, they will share the load as under: (A) proportional to their impedances. (B) inversely proportional to their impedances. (C) 50% - 50% (D) 25%-75%

Last Answer : Ans: A High rating transformer has higher impedance. kVA rating α Impedance of transformer

The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

Description : The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

Last Answer : (D) Yielding point