What's the process by which the line of sight from a scope and the path of a bullet from a rifle is calibrated?

What's the process by which the line of sight from a scope and the path of a bullet from a rifle is calibrated?
by

1 Answer

Answer :

In mechanics, I studied this. Trajectory or path of the bullet is parabolic. You may read Rifle Bullet Trajectory. Rifle shooting tips Rifle Trajectory Table Parts of a trajectory
by

Related questions

A bullet is fired from a fifle. If the rifle recoils freely, the kinetic energy of the rifle a.will be the same as the kinetic energy of the bullet b.will be less than the kinetic energy of the bullet c.107 dynes d.will be more than the kinetic energy of the bullet e.

Description : A bullet is fired from a fifle. If the rifle recoils freely, the kinetic energy of the rifle a.will be the same as the kinetic energy of the bullet b.will be less than the kinetic energy of the bullet c.107 dynes d.will be more than the kinetic energy of the bullet e.

Last Answer : b. will be less than the kinetic energy of the bullet

Rifle is to bullet as bow is to?

Description : Rifle is to bullet as bow is to?

Last Answer : Sticks

A bullet is fired from a rifle which recoils after firing. The ratio of kinetic energy of the rifle to that of the bullet is – (1) zero (2) one (3) less than one (4) more than one

Description : A bullet is fired from a rifle which recoils after firing. The ratio of kinetic energy of the rifle to that of the bullet is – (1) zero (2) one (3) less than one (4) more than one

Last Answer : (1) zero Explanation: The rifle and bullet have zero momentum and zero kinetic energy to start with. When the trigger is pulled, the bullet gains some momentum in the forward direction, but this is ... The kinetic energies of the gun and bullet are both positive scalars, however, and do not cancel.

A bullet is fired with a muzzle velocity of 1000 meters per second from a rifle clamped to a window 4.9 meters above ground level. Neglecting air resistance, the horizontal distance from the rifle at which the bullet will strike the ground is w) 4.9 meters x) 500 meters y) 1000 meters z) 4900 meters

Description : A bullet is fired with a muzzle velocity of 1000 meters per second from a rifle clamped to a window 4.9 meters above ground level. Neglecting air resistance, the horizontal distance from the rifle at which the bullet will strike the ground is w) 4.9 meters x) 500 meters y) 1000 meters z) 4900 meters

Last Answer : ANSWER: Y -- 1000 METERS

A bullet is fired from a rifle which recoils after firing. The ratio of kinetic energy of the rifle to that of the bullet is (1) zero (2) one (3) less than one (4) more than one

Description : A bullet is fired from a rifle which recoils after firing. The ratio of kinetic energy of the rifle to that of the bullet is (1) zero (2) one (3) less than one (4) more than one

Last Answer : zero

When using a multimeter for resistance measurements, it should be calibrated by clipping the loose ends of the leads together and _____________. A. setting the instrument pointer at 'zero' ohms B. adjusting the line voltage to calibrate the instrument C. plugging each end of one test lead into the plus and minus terminals D. using a special purpose resistance measuring instrument (a bridge)

Description : When using a multimeter for resistance measurements, it should be calibrated by clipping the loose ends of the leads together and _____________. A. setting the instrument pointer at 'zero' ohms B. ... the plus and minus terminals D. using a special purpose resistance measuring instrument (a bridge)

Last Answer : Answer: A

Fill in the blank. Crashing refers to when the task duratioSelect one: a. scope creep b. floated c. slack d. compressed e. expeditedn’s are __ along the critical path to meet the project completion date.

Description : Fill in the blank. Crashing refers to when the task duration’s are __ along the  critical path to meet the project completion date. Select one: a. scope creep b. floated c. slack d. compressed e. expedited

Last Answer : d. compressed

What are some examples when the word calibrated is used in a lay person's life?

Description : What are some examples when the word calibrated is used in a lay person's life?

Last Answer : TV screen – to make the picture display correctly. Printer – to make the different colours align. Oven with an oven thermometer – to make sure it’s at the temperature you think it’s at. Laptop battery – so that the display gives an accurate readout of how much powered left. A cars wheel alignment.

How a thermometer is calibrated?

Description : How a thermometer is calibrated?

Last Answer : How a thermometer is calibrated?

Can I use eurometer calibrated in RMS to measure HWDC in peak?

Description : Can I use eurometer calibrated in RMS to measure HWDC in peak?

Last Answer : No

What calibrated tool was the standard tool for engineers and scientists prior to the invention of the hand-held calculator?

Description : What calibrated tool was the standard tool for engineers and scientists prior to the invention of the hand-held calculator?

Last Answer : Slide rule

The most effective method of locating a loose commutator bar in a D.C. motor is by _____________. A. visual inspection B. jiggling each by hand C. sounding each bar with a light weight hammer D. checking with a calibrated torque wrench

Description : The most effective method of locating a loose commutator bar in a D.C. motor is by _____________. A. visual inspection B. jiggling each by hand C. sounding each bar with a light weight hammer D. checking with a calibrated torque wrench

Last Answer : Answer: C

A capacitor discolored due to excessive heat should be _____________. A. calibrated using a capactance wheatstone bridge B. replaced and the reason for the overheating found C. cooled with a spray can of refrigerant approved for this purpose D. resoldered with care taken to insure that the origional cold solder joint is repaired

Description : A capacitor discolored due to excessive heat should be _____________. A. calibrated using a capactance wheatstone bridge B. replaced and the reason for the overheating found C. cooled with a spray ... purpose D. resoldered with care taken to insure that the origional cold solder joint is repaired

Last Answer : Answer: B

Most AC voltmeters are calibrated to indicate __________. A. peak-to-peak voltage B. root-mean-square voltage C. average voltage D. peak voltage only

Description : Most AC voltmeters are calibrated to indicate __________. A. peak-to-peak voltage B. root-mean-square voltage C. average voltage D. peak voltage only

Last Answer : Answer: B

AC voltmeters are generally calibrated to read the ________. A. instantaneous voltage B. average voltage C. RMS voltage D. peak voltage

Description : AC voltmeters are generally calibrated to read the ________. A. instantaneous voltage B. average voltage C. RMS voltage D. peak voltage

Last Answer : Answer: C

When troubleshooting a lead-acid storage battery, a weak or dead cell is best detected by _________________. A. measuring and comparing all cells' specific gravity B. taking an open circuit voltage test of individual cells C. visually inspecting the electrolyte levels of each cell D. taking each cell's temperature with a calibrated mercury thermometer

Description : When troubleshooting a lead-acid storage battery, a weak or dead cell is best detected by _________________. A. measuring and comparing all cells' specific gravity B. taking an open circuit ... electrolyte levels of each cell D. taking each cell's temperature with a calibrated mercury thermometer

Last Answer : Answer: A

A capacitor discolored due to excessive heat should be _____________. A. calibrated B. replaced C. cooled D. soldered

Description : A capacitor discolored due to excessive heat should be _____________. A. calibrated B. replaced C. cooled D. soldered

Last Answer : Answer: B

Explain How Can A D.p. Transmitter Be Calibrated?

Description : Explain How Can A D.p. Transmitter Be Calibrated?

Last Answer : D.P. transmitter can be calibrated using following steps: 1. Adjust zero of Xmtrs. 2. Perform static pressure test: Give equal pressure on both sides of transmitter. Zero should not shift either ... Apply required pressure to the high pressure side and adjust the span. Adjust zero gain if necessary.

How Can A D.p. Transmitter Be Calibrated?

Description : How Can A D.p. Transmitter Be Calibrated?

Last Answer : D.P. transmitter can be calibrated using following steps: 1. Adjust zero of Transmitter. 2. Perform static pressure test: Give equal pressure on both sides of transmitter. Zero should not ... Apply required pressure to the high pressure side and adjust the span. Adjust zero gain if necessary.

An instrument that must be calibrated in place requires what type of calibration label?

Description : An instrument thAn instrumAn instrument that must be calibrated in place requires what type of calibration label?

Last Answer : SPECIAL CALIBRATION label.

What equipment uses a calibrated resonant circuit to measure frequency?

Description : What equipment uses a calibrated resonant circuit to measure frequency?

Last Answer : Wavemeter.

For amplitude measurements, ___ scale is calibrated in either volts per centimeter (V/cm), or millivolts per centimeter (mV/cm)

Description : For amplitude measurements, ___ scale is calibrated in either volts per centimeter (V/cm), or millivolts per centimeter (mV/cm)

Last Answer : vertical

Optical cable testers are used for ∙ a. Checking refractive index ∙ b. Light power out of a fiber ∙ c. Non-calibrated light into a fiber

Description : Optical cable testers are used for ∙ a. Checking refractive index ∙ b. Light power out of a fiber ∙ c. Non-calibrated light into a fiber

Last Answer : b. Light power out of a fiber

Optical cable testers are used for ∙ a. Checking refractive index ∙ b. Light power out of a fiber ∙ c. Non-calibrated light into a fiber

Description : Optical cable testers are used for ∙ a. Checking refractive index ∙ b. Light power out of a fiber ∙ c. Non-calibrated light into a fiber

Last Answer : ∙ b. Light power out of a fiber

For ultrasonic testing, which of the following statements is true? a) It is easy to identify all defects b) The equipment shall be calibrated before use c) The equipment cannot be automated d) Sound waves will not travel through copper

Description : For ultrasonic testing, which of the following statements is true? a) It is easy to identify all defects b) The equipment shall be calibrated before use c) The equipment cannot be automated d) Sound waves will not travel through copper

Last Answer : b) The equipment shall be calibrated before use

How can a periodontal pocket be recognised:** A. X-Ray B. Periodontal probe / Calibrated probe C. Periodontal marker D. Bitewing radiograph E. Sharp explorer F. Study cast

Description : How can a periodontal pocket be recognised:** A. X-Ray B. Periodontal probe / Calibrated probe C. Periodontal marker D. Bitewing radiograph E. Sharp explorer F. Study cast

Last Answer : B. Periodontal probe / Calibrated probe

If digital DRT is calibrated for 300 mm longitudinal wave using 00 double crystal probe then 60kg rail ---------peak will appear at (i) 5.2 (ii) 5.7* (iii) 7.8 (iv) 8.6

Description : If digital DRT is calibrated for 300 mm longitudinal wave using 00 double crystal probe then 60kg rail ---------peak will appear at (i) 5.2 (ii) 5.7* (iii) 7.8 (iv) 8.6

Last Answer : ii) 5.7*

A moving bullet hits a solid target resting on a frictionless surface and gets embedded in it. What is conserved in this process? (a) Both momentum and kinetic energy (b) Kinetic energy alone (c) Momentum alone (d) Neither momentum nor kinetic energy

Description : A moving bullet hits a solid target resting on a frictionless surface and gets embedded in it. What is conserved in this process? (a) Both momentum and kinetic energy (b) Kinetic energy alone (c) Momentum alone (d) Neither momentum nor kinetic energy

Last Answer : Ans:(c)

What's the make/model of Luke Skywalker's blaster rifle?

Description : What's the make/model of Luke Skywalker's blaster rifle?

Last Answer : Off the top of my head, I'm not positive. But if I were to venture a guess, EE-3 is the one that keeps coming to mind. My second guess would be an E-11 but it seems to me they were Imperial ... it would have been unlikely for one to be in the hands of Luke. Then again, I'm not entirely positive.

What's your first thought if you see a guy walking around in public strapped with a pistol or rifle?

Description : What's your first thought if you see a guy walking around in public strapped with a pistol or rifle?

Last Answer : That he or she is a wing-nut, and to be avoided, lest one would have to hear him or her speak.

What's the biggest bullet you failed to dodge?

Description : What's the biggest bullet you failed to dodge?

Last Answer : Every parent "KIDS"

Cat 1 is the mother to Cat 2-5.Cat 1 spayed. Now after almost a year she is still aggressive to all the other cats and even us. She sits up high to see everything but if another cat comes in her line of sight she starts hissing at them. Help please?

Description : Cat 1 is the mother to Cat 2-5.Cat 1 spayed. Now after almost a year she is still aggressive to all the other cats and even us. She sits up high to see everything but if another cat comes in her line of sight she starts hissing at them. Help please?

Last Answer : These dominant cats are usually not aggressive

The reduced levels of the string at the consecutive sight rails A and B are 203.575 m, 203.475 m respectively. If the difference of their R.D.s is 10 m, the gradient of the sewer line is A. 1 in 100 upward B. 1 in 500 upward C. 1 in 100 downward D. 1 in 503 upward

Description : The reduced levels of the string at the consecutive sight rails A and B are 203.575 m, 203.475 m respectively. If the difference of their R.D.s is 10 m, the gradient of the sewer line is A. 1 in 100 upward B. 1 in 500 upward C. 1 in 100 downward D. 1 in 503 upward

Last Answer : ANS: C

What is the maximum line-of-sight distance between a paging antenna 250 ft high and a pager receiver 3.5ft of the ground? A. 25 km B.25mi C. 70.73 km D. 70.73 mi

Description : What is the maximum line-of-sight distance between a paging antenna 250 ft high and a pager receiver 3.5ft of the ground? A. 25 km B.25mi C. 70.73 km D. 70.73 mi

Last Answer : B.25mi

A means of beyond the line-of-sight propagation of microwave signal. A. Space wave B. Microwave link C. Troposcatter D. Point-to-point

Description : A means of beyond the line-of-sight propagation of microwave signal. A. Space wave B. Microwave link C. Troposcatter D. Point-to-point

Last Answer : C. Troposcatter

ECE Board Exam March 1996 When the transmitting and receiving antennas are in line-of-sight of each other, the mode of propagation is ________ wave. A. space or direct B. ground C. surface D. sky

Description : ECE Board Exam March 1996 When the transmitting and receiving antennas are in line-of-sight of each other, the mode of propagation is ________ wave. A. space or direct B. ground C. surface D. sky

Last Answer : A. space or direct

Explain the following: (i) Blood group (ii) Short circuit (iii) Short sight (iv) International date line (v) Plaster of Paris

Description : Explain the following: (i) Blood group (ii) Short circuit (iii) Short sight (iv) International date line (v) Plaster of Paris

Last Answer : Answers: (i) Blood group A blood type (also called a blood group) is a classification of blood based on the presence or absence of inherited antigenic substances on the surface of red blood ... calcium sulfate hemihydrate, nominally CaSO4 0.5H2O. It is created by heating gypsum to about 150 °C.

Signals with a frequency above30 MHz use_______propagation. A) ground B) sky C) line-of-sight D) none of the above

Description : Signals with a frequency above30 MHz use_______propagation. A) ground B) sky C) line-of-sight D) none of the above

Last Answer : line-of-sight

Signals with a frequency between 2 MHz and 30 MHz use ______ propagation. A) ground B) sky C) line-of-sight D) none of the above

Description : Signals with a frequency between 2 MHz and 30 MHz use ______ propagation. A) ground B) sky C) line-of-sight D) none of the above

Last Answer : sky

Signals with a frequency below 2 MHz use _______ propagation. A) ground B) sky C) line-of-sight D) none of the above

Description : Signals with a frequency below 2 MHz use _______ propagation. A) ground B) sky C) line-of-sight D) none of the above

Last Answer : ground

The intercept of a staff (A) Is maximum if the staff is held truly normal to the line of sight (B) Is minimum if the staff is held truly normal to the line of sight (C) Decreases if the staff is tilted away from normal (D) Increases if the staff is tilted towards normal

Description : The intercept of a staff (A) Is maximum if the staff is held truly normal to the line of sight (B) Is minimum if the staff is held truly normal to the line of sight (C) Decreases if the staff is tilted away from normal (D) Increases if the staff is tilted towards normal

Last Answer : (B) Is minimum if the staff is held truly normal to the line of sight

Two hill tops and 20 km apart are intervened by a third top . If the top most contour of the three hill tops are of the same value, state whether the line of sight AB (A) Passes clear of hill top C (B) Passes below the hill top C(C) Grazes the hill top C(D) None of these

Description : Two hill tops and 20 km apart are intervened by a third top . If the top most contour of the three hill tops are of the same value, state whether the line of sight AB (A) Passes clear of hill top C (B) Passes below the hill top C (C) Grazes the hill top C (D) None of these

Last Answer : (B) Passes below the hill top C

A transit is oriented by setting its vernier A to read the back azimuth of the preceding line. A back sight on the preceding transit station taken and transit is rotated about its vertical axis. The vernier A reads (A) Azimuth of the forward line (B) Bearing of the forward line (C) Back bearing of the forward line (D) Equal to 360°-azimuth of the forward line

Description : A transit is oriented by setting its vernier A to read the back azimuth of the preceding line. A back sight on the preceding transit station taken and transit is rotated about its vertical axis. The vernier ... (C) Back bearing of the forward line (D) Equal to 360°-azimuth of the forward line

Last Answer : (A) Azimuth of the forward line

In an adjusted level, when the bubble is central, the axis of the bubble tube becomes parallel to (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Description : In an adjusted level, when the bubble is central, the axis of the bubble tube becomes parallel to (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Last Answer : (A) Line of sight

Pick up the correct statement from the following: (A) The eyepiece plays no part in defining the line of sight (B) The diaphragm plays no part in defining the line of sight (C) The optical centre of the objective plays no part in defining the line of sight (D) None of these

Description : Pick up the correct statement from the following: (A) The eyepiece plays no part in defining the line of sight (B) The diaphragm plays no part in defining the line of sight (C) The optical centre of the objective plays no part in defining the line of sight (D) None of these

Last Answer : (A) The eyepiece plays no part in defining the line of sight

When the bubble of the level tube of a level, remains central (A) Line of sight is horizontal (B) Axis of the telescope is horizontal (C) Line of collimation is horizontal (D) Geometrical axis of the telescope is horizontal

Description : When the bubble of the level tube of a level, remains central (A) Line of sight is horizontal (B) Axis of the telescope is horizontal (C) Line of collimation is horizontal (D) Geometrical axis of the telescope is horizontal

Last Answer : (A) Line of sight is horizontal

The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Description : The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Last Answer : (B) Line of collimation

If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Description : If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Last Answer : (A) Horizontal sights