If your turn signals were broken on your car, would you lower the window and give a signal with your arm?

If your turn signals were broken on your car, would you lower the window and give a signal with your arm?
by

1 Answer

Answer :

That’s what you’re supposed to do, yes. But ideally you get them fixed as soon as possible.
by

Related questions

What does a white cloth/shirt out of the window of a car that is (presumably) broken down mean?

Description : What does a white cloth/shirt out of the window of a car that is (presumably) broken down mean?

Last Answer : I have never seen this before, good question

Should I have removed medical material used to fix a broken arm?

Description : Should I have removed medical material used to fix a broken arm?

Last Answer : Personally I would probably avoid an unnecessary surgery if they weren’t bugging me too much. What does your doctor have to say about the two options?

Any tips on washing a child with a broken arm?

Description : Any tips on washing a child with a broken arm?

Last Answer : At my local pharmacy, they actually have cast protection bags with a velcro closure at the top of the bag to make on and off easier on you and the kiddo.

Broken arm after surgery - rehabilitation

Description : Hello, mother-in-law is a little over a month after fractures of the arm in the elbow and subsequent surgery. She was given the task of exercising her hand daily. Well, now we're all visiting our ... went to the doctor that she somehow hurts more and that she has a job where she walks all day.

Last Answer : If he puts his hand to work, it warms up. It takes a little over a month with or without rehabilitation. After all, she can warm up on her own, for example on TV. She knows what makes her feel good about it.

How long will the broken arm come together?

Last Answer : It depends on how broken it is and where it is broken. On average some 6 to 8 weeks. And then rehabilitation, because the muscles atrophied during that time.

How to recognize a broken arm?

Description : How do I know if my arm is broken?

Last Answer : Well, preferably by X-ray :-)) If you don't keep anything in it, it's quite probable. (sun)

How to recognize a broken arm?

Description : When the hand hurts terribly, but there is no pain when pulling it. So it's probably just bumped isn't it?

Last Answer : Where does it hurt ?? If there is a painful area on the arm or forearm, the bones can be palpated. If it's the bones of the wrists, breasts, fingers ..., you don't have to touch the fracture. Anyway - you ... so go to the doctor ... ;-) And - by the way, a bruised bone hurts more than a broken one.

Broken garage door opener with shut garage doors, must I break out a window?

Description : Broken garage door opener with shut garage doors, must I break out a window?

Last Answer : answer:Bust a window? Are you locked out of your house? I’m confused. Is it just the remote not opening, but you can open the garage with the button on the wall of the garage?

Broken closing by a plastic window.

Description : One window seems to be jammed and there's nothing to do with it. Do you think it will be repaired or a new window will have to be bought? But it should go to change the paganism, right?

Last Answer : Plastic windows have a very sophisticated mechanism. It will definitely work. Just know where to squeeze and what to pull on (yawn). And also possibly have a spare part. So call the company that ... the windows or similar. Mechanical moving parts on the windows must be lubricated from time to time.

Who is responsible for paying for a broken door window the landlord or tenant ?

Description : Who is responsible for paying for a broken door window the landlord or tenant ?

Last Answer : Report the window to the police. You may have to check with your cities rental laws but I would not pay for the window unless I was the one who broke it.

This window is double paned. Only the inside part got cracked and broken. Would I have to replace the whole window or can one pane be fixed?

Description : This window is double paned. Only the inside part got cracked and broken. Would I have to replace the whole window or can one pane be fixed?

Last Answer : Most newer double paned windows are air tight and sealed, and once that seal is broken humidity and moisture can build up between the glass. It is important fix the broken seal or have the whole window replaced.

In what situation might in be better to position the electrodes on the upper arm and the thighs rather than lower on the arms and legs?

Description : In what situation might in be better to position the electrodes on the upper arm and the thighs rather than lower on the arms and legs?

Last Answer : Need answer

The main importance of ARM micro-processors is providing operation with ______ A. Low cost and low power consumption B. Higher degree of multi-tasking C. Lower error or glitches D. Efficient memory management

Description : The main importance of ARM micro-processors is providing operation with ______ A. Low cost and low power consumption B. Higher degree of multi-tasking C. Lower error or glitches D. Efficient memory management

Last Answer : A. Low cost and low power consumption 

Microwave transmits signals through open space like radio signal. -Technology

Description : Microwave transmits signals through open space like radio signal. -Technology

Last Answer : TrueIt supports long distance communication through space like radio signal

Consider the following statements: 1. In a direct-to-home (DTH) system, the viewer dish antenna picks up signals from the satellite directly. 2. Cable operators receive signal from the satellite on large community dish antennas and then transmit to the viewers’ sets. Which of the above statements is/are correct? (a) Only 1 (b) Only 2 (c) Both 1 and 2 (d) Neither 1 nor 2

Description : Consider the following statements: 1. In a direct-to-home (DTH) system, the viewer dish antenna picks up signals from the satellite directly. 2. Cable operators receive signal from the satellite on large community dish antennas and ... ? (a) Only 1 (b) Only 2 (c) Both 1 and 2 (d) Neither 1 nor 2

Last Answer : Ans:(c)

Which set of truth table input signals will result in an output signal value of 1 from the 'AND' gate as shown in the illustration? EL-0035 A. 1-Jan B. Jan-00 C. 0-1 D. 0-0

Description : Which set of truth table input signals will result in an output signal value of 1 from the 'AND' gate as shown in the illustration? EL-0035 A. 1-Jan B. Jan-00 C. 0-1 D. 0-0

Last Answer : Answer: A

As shown in the illustration, which set of truth table input signals will result in an output signal at point 'Y'? EL-0035 A. 0-0 B. 0-1 C. Jan-00 D. 1-Jan

Description : As shown in the illustration, which set of truth table input signals will result in an output signal at point 'Y'? EL-0035 A. 0-0 B. 0-1 C. Jan-00 D. 1-Jan

Last Answer : Answer: D

What is the purpose of either 'setpoint module' (6000F090/030) shown in the illustration? EL-0094 A. Program the 'signal conditioner' as to how to vary its input. B. Supply 0 - 10 volts to the 'signal conditioner'. C. Initiate logging of measured information at set intervals; for example, each hour. D. Obtain an input from the 'signal conditioner' and, if outside set limits, signals the 'annunciator'.

Description : What is the purpose of either 'setpoint module' (6000F090/030) shown in the illustration? EL-0094 A. Program the 'signal conditioner' as to how to vary its input. B. Supply 0 - 10 volts to ... . Obtain an input from the 'signal conditioner' and, if outside set limits, signals the 'annunciator'.

Last Answer : Answer: D

Stacking antenna elements A. increases sensitivity to weak signals B. will suppress odd harmonics C. decrease signal to noise ratio D. increases selectivity

Description : Stacking antenna elements A. increases sensitivity to weak signals B. will suppress odd harmonics C. decrease signal to noise ratio D. increases selectivity

Last Answer : A. increases sensitivity to weak signals

In radio signal emission designation, the fifth symbol means A. Details of signals B. Type of information transmitted C. Nature of multiplexing D. Nature of signal modulating the main carrier

Description : In radio signal emission designation, the fifth symbol means A. Details of signals B. Type of information transmitted C. Nature of multiplexing D. Nature of signal modulating the main carrier

Last Answer : C. Nature of multiplexing

Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than analog signals C. digital signals are smaller than analog signals and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Description : Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than ... and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Last Answer : A. repeaters regenerate digital pulses and remove distorstion

ECE Board Exam March 1996 What is the purpose of the receiver’s squelch circuit? A. To overcome fluctuations in the level the RF signal arriving at the receiver antenna B. To prevent fluctuations in the AGC bias level C. To reduce the receiver’s sensitivity to all incoming signals D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

Description : ECE Board Exam March 1996 What is the purpose of the receiver's squelch circuit? A. To overcome fluctuations in the level the RF signal arriving at the receiver antenna B. To prevent ... signals D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

Last Answer : D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

ECE Board Exam March 1996 What is the purpose of a beat frequency oscillator (BFO)? A. Aid in the reception of weak voice-modulated signals B. Generates a signal, whose frequency is the same as that of the intermediate frequency C. Generates a 1kHz note for Morse code reception D. Generates an output, whose frequency differs from that of the intermediate frequency by 1 kHz

Description : ECE Board Exam March 1996 What is the purpose of a beat frequency oscillator (BFO)? A. Aid in the reception of weak voice-modulated signals B. Generates a signal, whose frequency is the ... reception D. Generates an output, whose frequency differs from that of the intermediate frequency by 1 kHz

Last Answer : C. Generates a 1kHz note for Morse code reception

Which is the input of control unit: a. Master clock signal b. Instruction register c. Flags d. Control signals from bus e. Allof these

Description : Which is the input of control unit: a. Master clock signal b. Instruction register c. Flags d. Control signals from bus e. Allof these

Last Answer : e. Allof these

The various stages occuring in GPS system are described below: 1. Generation of an output to the user 2. Detection of the GPS signals 3. Processing the data in the built-in-computer 4. Decoding the GPS signal. The correct sequence of the stages is: (A) 1, 2, 3, 4 (B) 2, 3, 4, 1 (C) 2, 4, 3, 1 (D) 3, 1, 2 , 4

Description : The various stages occuring in GPS system are described below: 1. Generation of an output to the user 2. Detection of the GPS signals 3. Processing the data in the built-in-computer 4. Decoding the GPS signal. The correct sequence of ... 4 (B) 2, 3, 4, 1 (C) 2, 4, 3, 1 (D) 3, 1, 2 , 4

Last Answer : Answer: Option C

If the input signals are 180 degrees out of phase with each other and a combined output is taken between the two output terminals, what will the amplitude of the combined output signal be?

Description : If If the input signals are 180 degrees out of phase with each other and a combined output is taken between the two output terminals, what will the amplitude of the combined output signal be?

Last Answer : 200 millivolts.

If the two input signals to a difference amplifier are equal in amplitude but neither in phase nor 180 degrees out of phase, what will the output signal be?

Description : If the two input signals to a difference amplifier are equal in amplitude but neither in phase nor 180 degrees out of phase, what will the output signal be?

Last Answer : . A different shape than the input signals but larger in amplitude.

If the two input signals to a difference amplifier are equal in amplitude and 180 degrees out of phase, what will the output signal be?

Description : If the two input signals to a difference amplifier are equal in amplitude and 180 degrees out of phase, what will the output signal be?

Last Answer : Equal in shape and frequency to each input signal and larger in amplitude by two times than

. If the two input signals of a difference amplifier are in phase and equal in amplitude, what will the output signal be?

Description : . If the two input signals of a difference amplifier are in phase and equal in amplitude, what will the output signal be?

Last Answer : No output (the signals will "cancel out").

In the power amplifier shown in figure 2-10, what two signals are mixed to produce the output signal? In the power amplifier shown in figure 2-10, what two signals are mixed to produce the output signal?

Description : In the power amplifier shown in figure 2-10, what two signals are mixed to produce the output signal?

Last Answer : Local oscillator and coherent oscillator.

Two tape recorders have signal-to-noise ratios (SNRs) of 25-dB RMS and 35-dB RMS respectively. Which of the SNRs can record and reproduce the widest range of input signals and why?

Description : Two tape recorders have signal-to-noise ratios (SNRs) of 25-dB RMS and 35-dB RMS respectively. Which of the SNRs can record and reproduce the widest range of input signals and why?

Last Answer : 35-dB RMS because the highest SNR can always record and reproduce the widest range of input signals.

A function of an optic isolator ∙ a. Cancels reflective waves ∙ b. Amplifies signal transmitted ∙ c. Filters unnecessary signals ∙ d. All of these

Description : A function of an optic isolator ∙ a. Cancels reflective waves ∙ b. Amplifies signal transmitted ∙ c. Filters unnecessary signals ∙ d. All of these

Last Answer : a. Cancels reflective waves

Level Crossing beyond the outermost stop signals is called a) Engineering Gate* b) Traffic Gate c) Engineering and Signal Gate d) Signal Gate

Description : Level Crossing beyond the outermost stop signals is called a) Engineering Gate* b) Traffic Gate c) Engineering and Signal Gate d) Signal Gate

Last Answer : a) Engineering Gate

The signals which are obtained by encoding each quantized signal into a digital word is called as a) PAM signal b) PCM signal c) FM signal d) Sampling and quantization

Description : The signals which are obtained by encoding each quantized signal into a digital word is called as a) PAM signal b) PCM signal c) FM signal d) Sampling and quantization

Last Answer : b) PCM signal

Which of the following statements is NOT correct ? (A) Computer is capable of processing only digital signal (B) Computer is capable of analysing both quantitative and qualitative data (C) Appropriate software is required for processing the data (D) Computer is capable of processing digital as well as analog signals

Description : Which of the following statements is NOT correct ? (A) Computer is capable of processing only digital signal (B) Computer is capable of analysing both quantitative and qualitative data (C) Appropriate ... for processing the data (D) Computer is capable of processing digital as well as analog signals

Last Answer : Answer: A

The .............. measures the relative strengths of two signals or a signal at two different points. (A) frequency (B) attenuation (C) throughput (D) decibel

Description : The .............. measures the relative strengths of two signals or a signal at two different points. (A) frequency (B) attenuation (C) throughput (D) decibel

Last Answer : (D) decibel

Communication satellites are used to: (1) To transmit communication signals (2) To receive and redirect communication signals (3) To only receive communication signal (4) To provide information of national sources only

Description : Communication satellites are used to: (1) To transmit communication signals (2) To receive and redirect communication signals (3) To only receive communication signal (4) To provide information of national sources only

Last Answer : To receive and redirect communication signals

______ signal is generated by combining RD and WR signals with IO/M.

Description : ______ signal is generated by combining RD and WR signals with IO/M.   (a) Control (b) System (c) Register (d) Memory

Last Answer : Control signal is generated by combining RD and WR signals with IO/M. 

Is the car using its turn signal running correctly? (Cross Test)

Description : [img] https:///file/2016/01/241-1.jpg [/ img] Yes. No.   

Last Answer : Yes. Explanation: The traffic lanes are not marked with a pavement sign, so the overtaking shown is normal, if they were marked, they would not be regular, see next question! (cross test / Driving on the road / Transport on a road with a tramway)

Where is the turn signal flasher location on the 1995 Lincoln town car?

Description : Where is the turn signal flasher location on the 1995 Lincoln town car?

Last Answer : TO THE BEST OF MY KNOWLEDGE THERE IS NO PLUG-IN FLASHER BASE FORREPLACEMENT. IT IS IN THE ELECTRONICS MODULE LOCATED JUST TO THELEFT OF THE ASH TRAY PULL OUT, DOWN TOWARDS THE BOTTOM OF THE DASH. ... the unit alittle time to dry, I plugged the 2 harnesses in back in, andeverything worked like new.

Is the driver of a vehicle about to stop along the curb required to give a turn signal? (Cross Test)

Description : Yes. in every case. Only if the stop involves a change of direction.

Last Answer : Yes. in every case.

Any way to muffle the sound from the turn signals on my Ford F150 truck?

Description : Any way to muffle the sound from the turn signals on my Ford F150 truck?

Last Answer : answer:Ha! Many of my patients notice that as one of the first things they can hear again after getting hearing aids. My mother-in-law texted us a couple minutes after they left the office because she was so ... or turn up the tunes, you'll drown them out. Or you could get earplugs for in the car.

What is the purpose of red left turn signals?

Description : What is the purpose of red left turn signals?

Last Answer : I agree, those drive me nuts. I guess the engineers think they know how to drive better than I do and they know what the traffic conditions are going to be 24/7. We have some seriously annoying lights around here.

Turn signals - Statement of intent or request for permission?

Description : Turn signals - Statement of intent or request for permission?

Last Answer : A statement of intent.

Why do some people not use turn signals?

Description : Why do some people not use turn signals?

Last Answer : I don’t know, but it really gets on my nerves! In NYC/NJ, it seems to be an epidemic.

Why do people constantly neglect to use their turn signals?

Description : Why do people constantly neglect to use their turn signals?

Last Answer : answer:http://www.ask-public.com/disc/13124/why-do-some-people-not-use-turn-signals/ Some conversation in there. Edit :: And I’m not complaining that you didn’t search. I have only used the search field once here. I was just wanting you to know where to find instant gratification.

Does the police control turn signals?

Description : Do police patrols also check lights and turn signals? Thank you

Last Answer : It has happened to me that I went through such an inspection on the road

What to do if I can't get diode turn signals on my motorcycle?

Description : We asked, but I say they have a small consumption than a normal light bulb, and that's my motorcycle, I can't give such a small "current", does anyone know if something can be done, please, so I can put the Diode there?

Last Answer : Hmmm ... Strange ...: o What kind of motorcycle is it? Well - you can connect a power resistor in parallel with the turn signal (you will probably have to test the required value with a half, I would start at 100 Ω and possibly reduce it).

How do WiFi modules turn light fiber data into computer understanding signals?

Description : How do WiFi modules turn light fiber data into computer understanding signals?

Last Answer : the module has a thingy that transfers it into data!!!!!