What is your opinion on liquid cooling for computers?

What is your opinion on liquid cooling for computers?
by

1 Answer

Answer :

answer:The systems now are effective and quiet and very neat. Not really worth it unless you have a powerhouse rig, but if you must have quiet…. go for it!
by

Related questions

What is the cooling of water in the atmosphere that changes gas to liquid?

Description : What is the cooling of water in the atmosphere that changes gas to liquid?

Last Answer : Condensation

Condensing temperature in a refrigerator is the temperature (a) of cooling medium (b) of freezing zone (c) of evaporator (d) at which refrigerant gas becomes liquid

Description : Condensing temperature in a refrigerator is the temperature (a) of cooling medium (b) of freezing zone (c) of evaporator (d) at which refrigerant gas becomes liquid

Last Answer : Ans: d

One of the purposes of sub-cooling the liquid refrigerant is to (a) reduce compressor overheating (b) reduce compressor discharge temperature (c) increase cooling effect (d) ensure that only liquid and not the vapour enters the expansion (throttling) valve

Description : One of the purposes of sub-cooling the liquid refrigerant is to (a) reduce compressor overheating (b) reduce compressor discharge temperature (c) increase cooling effect (d) ensure that only liquid and not the vapour enters the expansion (throttling) valve

Last Answer : Ans: d

A little ether on the palm gives a cooling sensation because ether (a) is a cold liquid (b) evaporates (c) enters the pores of the skin (d) condenses on the palm

Description : A little ether on the palm gives a cooling sensation because ether (a) is a cold liquid (b) evaporates (c) enters the pores of the skin (d) condenses on the palm

Last Answer : Ans:(b)

Superconductivity is a material property associated with - (1) cooling a substance without a phase change (2) frictionless liquid flow (3) a loss of thermal resistance (4) a loss of electrical resistance

Description : Superconductivity is a material property associated with - (1) cooling a substance without a phase change (2) frictionless liquid flow (3) a loss of thermal resistance (4) a loss of electrical resistance

Last Answer : (3) a loss of thermal resistance Explanation: Superconductivity is a phenomenon of exactly zero electrical resistance and expulsion of magnetic flux fields occurring in certain materials, called superconductors.

In a refrigerator what produces the cooling? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Description : In a refrigerator what produces the cooling? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Last Answer : (4) None of these Explanation: Basically, refrigeration system consists of devices that compress and expand refrigerant gas. When refrigerant gas is compressed it expels heat and when it is suddenly ... inside of the fridge is cooled to a temperature below the ambient temperature of the room.

Super cooling is cooling of liquid _____. (1) below melting point (2) below freezing point (3) at melting point (4) above melting point

Description : Super cooling is cooling of liquid _____. (1) below melting point (2) below freezing point (3) at melting point (4) above melting point

Last Answer : (2) below freezing point Explanation: Supercooling is the process of chilling a liquid below its freezing point, without it becoming solid.

Super cooling stands for cooling of a liquid – (1) at freezing point (2) below freezing point (3) at melting point (4) above melting point

Description : Super cooling stands for cooling of a liquid – (1) at freezing point (2) below freezing point (3) at melting point (4) above melting point

Last Answer : (2) below freezing point Explanation: Supercooling, also known as undercooling, is the process of lowering the temperature of a liquid or a gas below its freezing point without it ... droplets of water below their freezing point. Refrigeration is a popular commercial application of supercooling.

The equipment frequently used for adiabatic humidification-cooling operation with recirculating liquid is (A) Natural draft cooling tower (B) Induced draft cooling tower (C) Spray chamber (D) None of these

Description : The equipment frequently used for adiabatic humidification-cooling operation with recirculating liquid is (A) Natural draft cooling tower (B) Induced draft cooling tower (C) Spray chamber (D) None of these

Last Answer : (C) Spray chamber

Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given ‘L/V’ ratio (B) The extraction per unit of total height for a short packed column is more effective than for a tall column, in case of liquid-liquid extraction(C) Natural draft cooling towers are made of ferroconcrete and its cross￾section is wider at the bottom(D) Vander wall adsorption is also called chemisorption

Description : Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given L/V' ratio (B) The extraction per unit ... and its cross￾section is wider at the bottom (D) Vander wall adsorption is also called chemisorption

Last Answer : (D) Vander wall adsorption is also called chemisorption

Which of the following psychrometric processes is followed by water vapour laden unsaturated air, when it is passed through solid or liquid adsorbent? (A) Cooling and dehumidification (B) Heating and dehumidification at almost constant wet bulb temperature (C) Dehumidification with dry bulb temperature remaining constant (D) None of these

Description : Which of the following psychrometric processes is followed by water vapour laden unsaturated air, when it is passed through solid or liquid adsorbent? (A) Cooling and dehumidification ... (C) Dehumidification with dry bulb temperature remaining constant (D) None of these

Last Answer : (B) Heating and dehumidification at almost constant wet bulb temperature

Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation (B) Film co-efficient for vaporisation decreases as a result of vapor binding (C) In industrial practice, sub-cooling of condensate is required, when thecondensate is a volatile liquid and is to be transferred for storage(D) Overall heat transfer co-efficient in a heat exchanger is controlled by thevalue of the film co-efficient, which is higher

Description : Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation ( ... in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Last Answer : (D) Overall heat transfer co-efficient in a heat exchanger is controlled by the value of the film co-efficient, which is higher

In a gas-liquid shell and tube heat exchanger, the(A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure gases are corrosive in nature (C) Gases to be heated/cooled is normally routed through the shell side, because the corrosion caused by the cooling water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Description : In a gas-liquid shell and tube heat exchanger, the (A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure ... water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

The preferred reacting system for oxidation of o-xylene to phthalic anhydride is (A) Jacketed liquid phase CSTR (B) Jacketed steam heated multitubular reactor (C) Multitubular reactor with cooling (D) Multistage multitubular reactor with interstage cooling

Description : The preferred reacting system for oxidation of o-xylene to phthalic anhydride is (A) Jacketed liquid phase CSTR (B) Jacketed steam heated multitubular reactor (C) Multitubular reactor with cooling (D) Multistage multitubular reactor with interstage cooling

Last Answer : (A) Jacketed liquid phase CSTR

During the absorption of HCl gas in water (to produce liquid HCl), the gas is kept above dew point to (A) Increase the rate of absorption (B) Avoid corrosion (C) Reduce the cooling water circulation rate (D) None of these

Description : During the absorption of HCl gas in water (to produce liquid HCl), the gas is kept above dew point to (A) Increase the rate of absorption (B) Avoid corrosion (C) Reduce the cooling water circulation rate (D) None of these

Last Answer : (B) Avoid corrosion

Which is an example of closed system? (A) Air compressor (B) Liquid cooling system of an automobile (C) Boiler (D) None of these

Description : Which is an example of closed system? (A) Air compressor (B) Liquid cooling system of an automobile (C) Boiler (D) None of these

Last Answer : (B) Liquid cooling system of an automobile

The ratio of dissolved solids in circulating water to the dissolved solids in makeup water is called a) Liquid gas ratio b) Cycle of concentration c) Cooling tower effectiveness d) None of the above

Description : The ratio of dissolved solids in circulating water to the dissolved solids in makeup water is called a) Liquid gas ratio b) Cycle of concentration c) Cooling tower effectiveness d) None of the above

Last Answer : Cycle of concentration

The ratio of dissolved solids in circulating water to dissolved solids in makeup water is called. • Liquid gas ratio • Cycle of concentration • Cooling tower effectiveness • None of the above

Description : The ratio of dissolved solids in circulating water to dissolved solids in makeup water is called. • Liquid gas ratio • Cycle of concentration • Cooling tower effectiveness • None of the above

Last Answer : Cycle of concentration

A typical liquid-cooling system is composed of what loops?

Description : A typical liquid-cooling system is composed of what loops?

Last Answer : Primary and secondary.

Describe the working of water/liquid cooling system with neat sketch.

Description : Describe the working of water/liquid cooling system with neat sketch.

Last Answer : A water-cooled engine block and cylinder head have interconnected coolant channels running through them. At the top of the cylinder head all the channels converge to a single outlet. A pump, driven by a ... speed increases. There is no necessity of maintaining the water up to a correct level.  

Super cooling stands for cooling of a liquid : (1) at freezing point (2) below freezing point (3) at melting point (4) above melting point

Description : Super cooling stands for cooling of a liquid : (1) at freezing point (2) below freezing point (3) at melting point (4) above melting point

Last Answer :  below freezing point

In a refrigerator what produces the cooling ? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Description : In a refrigerator what produces the cooling ? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Last Answer : None of these

With today's laptops, is it still necessary to use a laptop cooler cooling pad when it sits on your desk or table?

Description : With today's laptops, is it still necessary to use a laptop cooler cooling pad when it sits on your desk or table?

Last Answer : Oh yes. I guess it depends on the kind of work you do. If you are just browsing, watching videos and stuff, you probably won't need a cooling pad but if you're on heavy duty things, you can ... ragged. I have no clue about the product you've listed though i just use an AC and two mini fans.