How can assembly lines double their capacity? a. Speed up the production. b. Add a second shift. c. Double the material. d. Build more assembly lines. e. Assembly lines cannot be doubled.

How can assembly lines double their capacity?
a. Speed up the production.
b. Add a second shift.
c. Double the material.
d. Build more assembly lines.
e. Assembly lines cannot be doubled.
by

1 Answer

Answer :

b. Add a second shift.
by

Related questions

Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Description : Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Last Answer : e. b, c, d

All of the following are direct implications of hiring a second shift except: a. increased production capacity. b. paying higher wages to second shift. c. training costs. d. increased MTBF. e. recruitment costs.

Description : All of the following are direct implications of hiring a second shift except: a. increased production capacity. b. paying higher wages to second shift. c. training costs. d. increased MTBF. e. recruitment costs.

Last Answer : d. increased MTBF.

What is the size of the plant at the start of the simulation? a. 5 assembly lines with space to add 1 more. b. 5 assembly lines with space to add 3 more. c. 5 assembly lines with space to add 2 more. d. 8 assembly lines. e. 0 – the plan can be built to team specification.

Description : What is the size of the plant at the start of the simulation? a. 5 assembly lines with space to add 1 more. b. 5 assembly lines with space to add 3 more. c. 5 assembly lines with space to add 2 more. d. 8 assembly lines. e. 0 – the plan can be built to team specification.

Last Answer : b. 5 assembly lines with space to add 3 more. c.

If you want to add 500,000 units of capacity to an assembly line with an automation rating of 5, how much will it cost? a. 1,200,000 b. 1,300,000 c. 13,000,000 d. 24,000,000 e. 26,000,000

Description : If you want to add 500,000 units of capacity to an assembly line with an automation rating of 5, how much will it cost? a. 1,200,000 b. 1,300,000 c. 13,000,000 d. 24,000,000 e. 26,000,000

Last Answer : c. 13,000,000

What is one drawback of increasing automation? a. The product requires increased time/expense for subsequent short-move repositioning. b. Operating second shift becomes more expensive. c. Automation causes large leaps in repositioning. d. Automation slows production capability. e. It requires more employees for the production line.

Description : What is one drawback of increasing automation? a. The product requires increased time/expense for subsequent short-move repositioning. b. Operating second shift becomes more expensive. c. ... d. Automation slows production capability. e. It requires more employees for the production line.

Last Answer : a. The product requires increased time/expense for subsequent short-move repositioning.

Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second shift, and MTBF. d. wage and benefit rates, automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Description : Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second ... , automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Last Answer : d. wage and benefit rates, automation levels, and second shift.

Which is false about production in Capsim? a. Teams cannot produce beyond 100% capacity. b. Teams should match their production schedule to the teams sales forecast. c. There is a one year lag between purchase and use of additional production capacity. d. There is a one year lag between purchase and use of additional production automation. e. All of the above are true.

Description : Which is false about production in Capsim? a. Teams cannot produce beyond 100% capacity. b. Teams should match their production schedule to the teams sales forecast. c. There is a one year lag ... year lag between purchase and use of additional production automation. e. All of the above are true.

Last Answer : a. Teams cannot produce beyond 100% capacity.

Lowering the automation level will result in a. receiving a cash payment of $4 per unit of capacity. b. a tax credit. c. a charge. d. immediate changes to production lines. e. none of the above.

Description : Lowering the automation level will result in a. receiving a cash payment of $4 per unit of capacity. b. a tax credit. c. a charge. d. immediate changes to production lines. e. none of the above.

Last Answer : c. a charge.

The cost to increase automation to 8.0 is equal to a. First Shift Capacity X [$8 X (4 – Automation Level). b. First Shift Capacity X [$8 X (4 + Automation Level). c. First Shift Capacity X [$4 X (8 – Automation Level). d. First Shift Capacity X [$4 X (8 + Automation Level). e. First Shift Capacity X [$4 X (4 – Automation Level)

Description : The cost to increase automation to 8.0 is equal to a. First Shift Capacity X [$8 X (4 - Automation Level). b. First Shift Capacity X [$8 X (4 + Automation Level). c. First Shift Capacity X [$4 X ... Capacity X [$4 X (8 + Automation Level). e. First Shift Capacity X [$4 X (4 - Automation Level)

Last Answer : c. First Shift Capacity X [$4 X (8 – Automation Level).

At the start of the simulation, all assembly lines have an automation level between: a. 2.0 and 4.0. b. 3.0 and 5.0. c. 4.0 and 6.0. d. 5.0 and 7.0. e. 6.0 and 8.0.

Description : At the start of the simulation, all assembly lines have an automation level between: a. 2.0 and 4.0. b. 3.0 and 5.0. c. 4.0 and 6.0. d. 5.0 and 7.0. e. 6.0 and 8.0.

Last Answer : b. 3.0 and 5.0.

How much higher are second shift wages than the first shift wages? a. 0 % b. 20 % c. 40 % d. 50 % e. 60 %

Description : How much higher are second shift wages than the first shift wages? a. 0 % b. 20 % c. 40 % d. 50 % e. 60 %

Last Answer : d. 50 %

.How many assembly lines are there? a. Always exactly five per company b. One for all companies c. One per company d. None of these.

Description : .How many assembly lines are there? a. Always exactly five per company b. One for all companies c. One per company d. None of these.

Last Answer : d. None of these.

.If you are currently producing 100,000 units and your automation level is 10, how much will it cost you to double your capacity? a. $1,000,000 b. $4,600,000 c. $100,000 d. $10,000 e. none of the above

Description : .If you are currently producing 100,000 units and your automation level is 10, how much will it cost you to double your capacity? a. $1,000,000 b. $4,600,000 c. $100,000 d. $10,000 e. none of the above

Last Answer : b. $4,600,000

If you increase automation from 2.0 to 5.0, the cost is: a. $12 per unit of capacity. b. $15 per unit of capacity. c. $9 per unit of capacity. d. $6 per unit of capacity. e. Cannot determine with this information.

Description : If you increase automation from 2.0 to 5.0, the cost is: a. $12 per unit of capacity. b. $15 per unit of capacity. c. $9 per unit of capacity. d. $6 per unit of capacity. e. Cannot determine with this information.

Last Answer : a. $12 per unit of capacity.

What is the most important element that ensures the accuracy of the Proformas reports? a. Production capacity b. Marketing sales forecasts c. R & D decisions d. Financial decisions e. All of the above

Description : What is the most important element that ensures the accuracy of the Proformas reports? a. Production capacity b. Marketing sales forecasts c. R & D decisions d. Financial decisions e. All of the above

Last Answer : b. Marketing sales forecasts

If all of the capacity on a production line is sold a. all remaining inventory is sold for half the average cost of production. b. a loss is written off on the income statement. c. Capstone interprets the action as a liquidation instruction. d. the company will receive a cash payment of 65% the original investment on capacity. e. all of the above.

Description : If all of the capacity on a production line is sold a. all remaining inventory is sold for half the average cost of production. b. a loss is written off on the income statement. c. Capstone ... company will receive a cash payment of 65% the original investment on capacity. e. all of the above.

Last Answer : e. all of the above.

A production line with 1000 units of capacity has a max production capability of: a. 1000. b. 1500. c. 2500. d. 2000. e. as many as needed.

Description : A production line with 1000 units of capacity has a max production capability of: a. 1000. b. 1500. c. 2500. d. 2000. e. as many as needed.

Last Answer : d. 2000.

If you sell off a production line (capacity and automation), the amount of cash that the company will receive will be a. 65% of the original cost. b. average cost of production for the previous year (market price). c. 50% of the book value. d. 50% of the acquisition cost. e. 65% of the book value.

Description : If you sell off a production line (capacity and automation), the amount of cash that the company will receive will be a. 65% of the original cost. b. average cost of production for the previous year (market ... . 50% of the book value. d. 50% of the acquisition cost. e. 65% of the book value.

Last Answer : a. 65% of the original cost.

What is the total cost in dollars for adding 1.0 million units of capacity to a production line with an automation level of 1.0 and floor space costs per unit of $6? Assume automation costs per unit of $4. a. $26 million b. $10 million c. $2.6 million d. $1 million e. none of the above

Description : What is the total cost in dollars for adding 1.0 million units of capacity to a production line with an automation level of 1.0 and floor space costs per unit of $6? Assume automation costs per unit of $4. a. $26 million b. $10 million c. $2.6 million d. $1 million e. none of the above

Last Answer : b. $10 million

Which financial obligation is best satisfied with Bond Issues? a. Accounts Payable b. Increased production capacity c. Changes in A/R policy d. Salary increases e. All of the above

Description : Which financial obligation is best satisfied with Bond Issues? a. Accounts Payable b. Increased production capacity c. Changes in A/R policy d. Salary increases e. All of the above

Last Answer : b. Increased production capacity

If you purchase production capacity and automation: a. it is available immediately. b. it is available in 6 months. c. it is available in the next year. d. it is available when you need it. e. none of the above.

Description : If you purchase production capacity and automation: a. it is available immediately. b. it is available in 6 months. c. it is available in the next year. d. it is available when you need it. e. none of the above.

Last Answer : c. it is available in the next year.

What is most likely to happen on introduction of a new product, if you do not buy the production line, in the year prior to the product’s introduction? a. You cannot manufacture your new product. b. If the product is moved close to existing products on the R&D spreadsheet, a few but insufficient number of the new product would be produced. c. The product would automatically cease to exist. d. The new product would stock out and there would be a loss in sales revenue. e. None of the above.

Description : What is most likely to happen on introduction of a new product, if you do not buy the production line, in the year prior to the product's introduction? a. You cannot manufacture your new product. b. ... new product would stock out and there would be a loss in sales revenue. e. None of the above.

Last Answer : a. You cannot manufacture your new product.

If you sell all the capacity on a production line, Capstone interprets this as a. a liquidation instruction and will sell your remaining inventory for one third of the average cost of production. b. a liquidation instruction and will sell your remaining inventory for half the average cost of production. c. a liquidation instruction and will sell your remaining inventory for 65 percent of the production cost.

Description : If you sell all the capacity on a production line, Capstone interprets this as a. a liquidation instruction and will sell your remaining inventory for one third of the average cost of ... a liquidation instruction and will sell your remaining inventory for 65 percent of the production cost.

Last Answer : b. a liquidation instruction and will sell your remaining inventory for half the average cost of production.

What is one way to lower material costs? a. decrease MTBF b. increase capacity c. increase automation d. none of the above

Description : What is one way to lower material costs? a. decrease MTBF b. increase capacity c. increase automation d. none of the above

Last Answer : a. decrease MTBF

What happens to a company when it increases the A/P lag? a. It improves its cash position. b. It deteriorates its cash position. c. It loses credibility. d. Its suppliers withhold material for production. e. a, d.

Description : What happens to a company when it increases the A/P lag? a. It improves its cash position. b. It deteriorates its cash position. c. It loses credibility. d. Its suppliers withhold material for production. e. a, d.

Last Answer : e. a, d.

ncreasing a product’s reliability will result in which of the following changes to production costs? a. Lower material cost b. Higher material cost c. Higher labor costs d. Lower labor costs e. Reducing MTBF has no effect on costs of production

Description : ncreasing a product’s reliability will result in which of the following changes to production costs? a. Lower material cost b. Higher material cost c. Higher labor costs d. Lower labor costs e. Reducing MTBF has no effect on costs of production

Last Answer : b. Higher material cost

As a general rule, stock issues are used to: a. Protect you from getting a loan from Big Al. b. Fund the purchase of more market share. c. Fund long term investments in capacity and automation. d. Fund yearly sales and promotional budgets. e. All of the above.

Description : As a general rule, stock issues are used to: a. Protect you from getting a loan from Big Al. b. Fund the purchase of more market share. c. Fund long term investments in capacity and automation. d. Fund yearly sales and promotional budgets. e. All of the above.

Last Answer : c. Fund long term investments in capacity and automation.

If a line has a capacity of 100,000 units, the cost of changing the automation level 1 unit either up or down is a. $60,000. b. $40,000. c. $400,000. d. $600,000. e. none of the above.

Description : If a line has a capacity of 100,000 units, the cost of changing the automation level 1 unit either up or down is a. $60,000. b. $40,000. c. $400,000. d. $600,000. e. none of the above.

Last Answer : c. $400,000.

When purchasing increased Capacity and Automation, the new capacity becomes available a. immediately. b. in 1 year. c. in 6 months. d. in 2 years. e. none of these.

Description : When purchasing increased Capacity and Automation, the new capacity becomes available a. immediately. b. in 1 year. c. in 6 months. d. in 2 years. e. none of these.

Last Answer : b. in 1 year.

Adding one additional unit of capacity costs a. $4 x Change (difference) in Automation Level b. $6 + ($4 x Current Automation Level). c. $6 x Change (difference) in Automation Level. d. $4 + ($6 x Current Automation Level). e. none of these.

Description : Adding one additional unit of capacity costs a. $4 x Change (difference) in Automation Level b. $6 + ($4 x Current Automation Level). c. $6 x Change (difference) in Automation Level. d. $4 + ($6 x Current Automation Level). e. none of these.

Last Answer : b. $6 + ($4 x Current Automation Level).

Which of the following is not one of the five parts to the Situation Analysis: a. Perceptual Map. b. Demand Analysis. c. Capacity Analysis. d. Consumer Report. e. Forecasting Analysis.

Description : Which of the following is not one of the five parts to the Situation Analysis: a. Perceptual Map. b. Demand Analysis. c. Capacity Analysis. d. Consumer Report. e. Forecasting Analysis.

Last Answer : e. Forecasting Analysis.

A new unit of capacity costs $6 for the floor space plus $4 times a. hourly wage. b. automation rating. c. unit cost. d. MTBF. e. $0.65.

Description : A new unit of capacity costs $6 for the floor space plus $4 times a. hourly wage. b. automation rating. c. unit cost. d. MTBF. e. $0.65.

Last Answer : b. automation rating.

There is ______ lag in buying new Capacity and ______ lag in changing Automation. a. 0; 0 b. 1 year; 0 c. 0; 1 year d. 1 year; 1 year e. ½ year; ½ year

Description : There is ______ lag in buying new Capacity and ______ lag in changing Automation. a. 0; 0 b. 1 year; 0 c. 0; 1 year d. 1 year; 1 year e. ½ year; ½ year

Last Answer : d. 1 year; 1 year

Repositioning moves a product on the Perceptual Map from its old location to a new one. When does the new location become active? a. The day the R&D project completes b. The following year the R&D project completes c. The month the R&D project completes d. The day capacity and automation is purchased e. The day capacity is purchased

Description : Repositioning moves a product on the Perceptual Map from its old location to a new one. When does the new location become active? a. The day the R&D project completes b. The following year ... R&D project completes d. The day capacity and automation is purchased e. The day capacity is purchased

Last Answer : a. The day the R&D project completes

.As a manager you need to change the automation level of your segment from 2 to 5. The line has a capacity of $2 million. How much would it cost? a. $12 million b. $24 million c. $10 million d. $6 million e. none of the above

Description : .As a manager you need to change the automation level of your segment from 2 to 5. The line has a capacity of $2 million. How much would it cost? a. $12 million b. $24 million c. $10 million d. $6 million e. none of the above

Last Answer : b. $24 million

.If your current capacity is 10,000 units and your automation level is 5.0, what is the difference of the investment between doubling your capacity and doubling your automation level? a. $60,000 b. $20,000 c. $10,000 d. $520,000 e. $260,000

Description : .If your current capacity is 10,000 units and your automation level is 5.0, what is the difference of the investment between doubling your capacity and doubling your automation level? a. $60,000 b. $20,000 c. $10,000 d. $520,000 e. $260,000

Last Answer : a. $60,000

What is the right formula for capacity investment? a. Investment = Capacity x ($4 x Automation) b. Investment = Capacity x [$10 + ($4 x Automation)] c. Investment = Capacity x [$4 + ($6 x Automation)] d. Investment = Capacity x [$6 + ($4 x Automation)] e. Investment = Capacity x Automation

Description : What is the right formula for capacity investment? a. Investment = Capacity x ($4 x Automation) b. Investment = Capacity x [$10 + ($4 x Automation)] c. Investment = Capacity x [$4 + ($6 x Automation)] d. Investment = Capacity x [$6 + ($4 x Automation)] e. Investment = Capacity x Automation

Last Answer : d. Investment = Capacity x [$6 + ($4 x Automation)]

How can the R&D cycle time be reduced? a. Increasing automation levels b. Budgeting money to quality initiatives c. Increasing R&D budget d. Decreasing product portfolio e. Decreasing capacity

Description : How can the R&D cycle time be reduced? a. Increasing automation levels b. Budgeting money to quality initiatives c. Increasing R&D budget d. Decreasing product portfolio e. Decreasing capacity

Last Answer : b. Budgeting money to quality initiatives

If your team decides to introduce a new product, when should capacity and automation be purchased? a. Two rounds prior to product release b. One round prior to product release c. The round of product release d. The round after product release e. Purchase of capacity and automation is not necessary for new product release

Description : If your team decides to introduce a new product, when should capacity and automation be purchased? a. Two rounds prior to product release b. One round prior to product release c. The ... round after product release e. Purchase of capacity and automation is not necessary for new product release

Last Answer : b. One round prior to product release

A segment manager’s task is to a. decide which products enter the segment. b. verify the products entering and leaving a segment, the margin potential for those products, capacity level and the distribution system as compared to competitors. c. review margin potential for each segment and evaluate the capacity for each segment compared to the competition. d. evaluate the capacity for each segment based on total demand and the competitor’s capacity; evaluate the margin potential of all products and the distribution systems. e. none of the above.

Description : A segment manager's task is to a. decide which products enter the segment. b. verify the products entering and leaving a segment, the margin potential for those products, capacity level and the ... ; evaluate the margin potential of all products and the distribution systems. e. none of the above.

Last Answer : b. verify the products entering and leaving a segment, the margin potential for those products, capacity level and the distribution system as compared to competitors.

The Finance Department can use which of the following methods to acquire capital for company activities? a. Current Debt, Stock Issues, Bond Issues, and Profits b. Profits, Current Debt, Withholding Pensions, and Stock Issues c. Liquidating Inventory, Stock Issues, Bond Issues and Profits d. Credit Lines, Bond Issues, Stock Issues, and Profits e. Current Debt, Stock Issues, Bond Issues, and cooking the books

Description : The Finance Department can use which of the following methods to acquire capital for company activities? a. Current Debt, Stock Issues, Bond Issues, and Profits b. Profits, Current Debt, Withholding ... Stock Issues, and Profits e. Current Debt, Stock Issues, Bond Issues, and cooking the books

Last Answer : a. Current Debt, Stock Issues, Bond Issues, and Profits

.A functional manager is responsible for a. one of the five market segments. b. R&D, Marketing, Production, Finance, Human Resources, and TQM/PI. c. one of the five products in the starting product line. d. none of these. e. monitoring competitors in their entirety.

Description : .A functional manager is responsible for a. one of the five market segments. b. R&D, Marketing, Production, Finance, Human Resources, and TQM/PI. c. one of the five products in the starting product line. d. none of these. e. monitoring competitors in their entirety.

Last Answer : b. R&D, Marketing, Production, Finance, Human Resources, and TQM/PI.

An accessibility of 60% means that ________. a. only 60% of customers have an easy time finding a product, talking to a salesperson and taking delivery. b. of the customers who cannot easily locate the product, half will seek it out. c. 40% of customers will not buy the product. d. a and b. e. a and c.

Description : An accessibility of 60% means that ________. a. only 60% of customers have an easy time finding a product, talking to a salesperson and taking delivery. b. of the customers who cannot easily locate the product, half will ... c. 40% of customers will not buy the product. d. a and b. e. a and c.

Last Answer : d. a and b.

The reliability component cost of a product with a 17,000 hour MTBF rating is: a. $5.10. b. $17.00. c. $51.00. d. $170. e. cost cannot be determined with information given.

Description : The reliability component cost of a product with a 17,000 hour MTBF rating is: a. $5.10. b. $17.00. c. $51.00. d. $170. e. cost cannot be determined with information given.

Last Answer : a. $5.10.

Capital needed for company activities cannot be acquired through: a. stocks and bonds. b. profits. c. current debt. d. arbitrarily firing employees. e. all of the above.

Description : Capital needed for company activities cannot be acquired through: a. stocks and bonds. b. profits. c. current debt. d. arbitrarily firing employees. e. all of the above.

Last Answer : d. arbitrarily firing employees.

Looking at the production, if the potential bar is higher than the actual one, a. the company should spend more budget in sales. b. the company over produced and missed sales opportunities. c. the company produced the right amount and missed no sales opportunities. d. the company under produced and missed sales opportunities. e. the company should spend more budget in marketing.

Description : Looking at the production, if the potential bar is higher than the actual one, a. the company should spend more budget in sales. b. the company over produced and missed sales ... company under produced and missed sales opportunities. e. the company should spend more budget in marketing.

Last Answer : d. the company under produced and missed sales opportunities.

Which statement is true? a. Increasing in capacity and changes in automation can take less than a year to implement if the product already exists. Sales of capacity take a full year to implement. b. Increases in capacity and changes in automation take a full year to implement. Sales of capacity are immediate. c. Increases in capacity, changes in automation and sales of capacity take a full year to implement. d. Increases in capacity, changes in automation and sales of capacity take less than a year to implement if the product already exists.

Description : Which statement is true? a. Increasing in capacity and changes in automation can take less than a year to implement if the product already exists. Sales of capacity take a full year to implement ... automation and sales of capacity take less than a year to implement if the product already exists.

Last Answer : b. Increases in capacity and changes in automation take a full year to implement. Sales of capacity are immediate.

For each point of change in automation, your company is charged ______ per unit of capacity. a. $6.00 c. $4.00 b. $5.00 d. $7.00

Description : For each point of change in automation, your company is charged ______ per unit of capacity. a. $6.00 c. $4.00 b. $5.00 d. $7.00

Last Answer : c. $4.00

When you sell capacity what percentage of your original investment do you receive? a. 65% c. 50% b. 25% d. 10%

Description : When you sell capacity what percentage of your original investment do you receive? a. 65% c. 50% b. 25% d. 10%

Last Answer : a. 65%

For Wages, the negotiation Starting Position cannot be less than ____% or more than ____% of the current contract. a. 75; 125 b. 75; 150 c. 80; 125 d. 80; 150

Description : For Wages, the negotiation Starting Position cannot be less than ____% or more than ____% of the current contract. a. 75; 125 b. 75; 150 c. 80; 125 d. 80; 150

Last Answer : d. 80; 150