What's your favorite idle threat?

What's your favorite idle threat?
by

1 Answer

Answer :

answer:I heard a woman yell to her kids: “Behave or I’ll rip your arms off and beat you with them!” She was kidding.
by

Related questions

Which lake or pond was your favorite to spend idle time at, whether fishing, skipping rocks or etc...

Description : Which lake or pond was your favorite to spend idle time at, whether fishing, skipping rocks or etc...

Last Answer : There was a place called Lost Lake in Hood River, Oregon. You could see Mt. Hood from there pretty well. Family trips aren’t as prevalent now, but we went there a lot in the summer. My mother and I would circle the lake looking for slamanders and just have great camp outs.

What's the normal idle RPM of a scooter?

Description : What's the normal idle RPM of a scooter?

Last Answer : Dear, The normal idle Rpm of the scooter is nearly 2000 Rpm, but it varies according to the CC of the scooter. More CC means more Idle rpm in the scooter..

What’s your favorite insult/threat?

Description : What’s your favorite insult/threat?

Last Answer : When yo' Momz says: "If you don't clean out the garage, you won't be entering mine!"

Why do you think old cars idle and rev so much?

Description : Why do you think old cars idle and rev so much?

Last Answer : answer:

End of an era! Life as we know it has changed! What will idle hands do now that bubble-wrap will no longer pop?

Description : End of an era! Life as we know it has changed! What will idle hands do now that bubble-wrap will no longer pop?

Last Answer : NNOOooooooooooooooooooo!!!! say it isn’t so.

Winter pile-ups; to idle or not to idle my old diesel?

Description : Winter pile-ups; to idle or not to idle my old diesel?

Last Answer : I rarely find that turning the ignition off altogether is worth it. Seems like about the time I do that, traffic moves a car length ahead, and I hate starting and stopping the car. Putting it in park ... the car idles smoother, I stay warm with radio, and I don't worry about burning the starter up.

Will having multiple IDLE devices connected to a router still slow it down?

Description : Will having multiple IDLE devices connected to a router still slow it down?

Last Answer : Mostly routers don't handle 10 devices at once, at least the ones I am aware of, mostly. If they are sleeping, they might occasionally ping your system, but they shouldn't cause much of a slow down ... pretty good modem/router (300). You can go bigger, or smaller, and that will change your service.

Is it okay that my CPU temperature more than 50 Celsius at low load/idle?

Description : Is it okay that my CPU temperature more than 50 Celsius at low load/idle?

Last Answer : answer:50C is roughly 122F. That's a tad warm for a Clarkdale i3 (mine idles around 43C/110F), but ice-cold for an old Northwood Pentium 4 (my old P4 idled around 57C/135F). Phenom II's tend to ... every once in a while to knock out the dust bunnies. FWIW, my video card reaches ~88C/190F under load.

Does it bother you when people make idle comments about you?

Description : Does it bother you when people make idle comments about you?

Last Answer : It's not something I have to deal with much, but I can see why it gets to you. There's an intrusive quality to it, like you're constantly under inspection. Even when we're out in public, there' ... of how every little thing you do will be perceived. I sure can't blame you for finding that tiring.

Does too much idle time make you anxious?

Description : Does too much idle time make you anxious?

Last Answer : answer:I know plenty of people who are like this (my wife, to some degree). However, I am quite the opposite. I have a large reservoir of things that I want to do, but have no time to do ... there should be backup plans to account for bad weather. This way, you always have something to fall back on.

Computer Help! My cpu is pegged at 90+% use at idle ?

Description : Computer Help! My cpu is pegged at 90+% use at idle ?

Last Answer : BTW; here is the link for Process Explorer if you want to add it to your toolkit..

My Peugeot 106 is overrevving on initial start and when idle - is it the idle control valve or automatic choke?

Description : My Peugeot 106 is overrevving on initial start and when idle - is it the idle control valve or automatic choke?

Last Answer : If it doesn’t settle down when it warms up, it’s less likely to be the choke.

Why do people idle their engines?

Description : Why do people idle their engines?

Last Answer : They are probably running the air conditioning or listening to the radio and are too self-indulgent to sit in quiet stillness with the windows open for a while.

Lazy Larry agreed to work on a job for his brother-in-law for thirty hours at eight dollars an hour, on the condition that he would forfeit ten dollars per hour for every hour that he idled. At the end of the thirty hours Larry wasn't owed any money and didn't owe his brother-in-law any money either. How many hours did Larry work and how many hours did he idle? -Riddles

Description : Lazy Larry agreed to work on a job for his brother-in-law for thirty hours at eight dollars an hour, on the condition that he would forfeit ten dollars per hour for every hour that he idled. At the ... -in-law any money either. How many hours did Larry work and how many hours did he idle? -Riddles

Last Answer : Lazy Larry worked 16-2/3 hours and idled 13-1/3 hours. 16-2/3 hours, at $8.00 an hour amounts to the same amount as 13-1/3 hours at $10.00 per hour.

What is Idle ?

Description : What is Idle ?

Last Answer : Idle means lazy.

The car wants to idle

Description : Hello. I had a minor problem. Recently, I had a problem with "pissing" the car at idle. Resp. When depressing the clutch and occasionally squeezing while driving. After replacing the air pressure sensor ( ... any advice with this problem. To specify: This is a Peugeot 307CC, 1.6 petrol year 2005

Last Answer : Need Answer

My 2012 model Hyundai Elantra does come up with devastating rough idle after few hours of driving, please how do you solve this problem?

Description : My 2012 model Hyundai Elantra does come up with devastating rough idle after few hours of driving, please how do you solve this problem?

Last Answer : If thair is rough iddiling probelm check engine components then check actuator check sensor's plug's if Diesel clean the full egr system first diagonas properly then take any necessary action.

i. Workers were sitting idle in a factory due to power failure for 3 hours.

Description : i. Workers were sitting idle in a factory due to power failure for 3 hours.

Last Answer : Observe the following charts and answer the questions given below: i. Workers were sitting idle in ... 's horse-cart was not demanded by travellers.

What causes 2000 Toyota Echo to idle fast?

Description : What causes 2000 Toyota Echo to idle fast?

Last Answer : Need answer

Why does my 96 Pontiac firebird 3.8 have hi idle?

Description : Why does my 96 Pontiac firebird 3.8 have hi idle?

Last Answer : Need answer

Where is the Idle Air Control Valve on a 2004 Buick rendezvous?

Description : Where is the Idle Air Control Valve on a 2004 Buick rendezvous?

Last Answer : Feel Free to Answer

What can I add to the fuel to make it idle more smoothly?

Description : What can I add to the fuel to make it idle more smoothly?

Last Answer : Acetone is often added to fuel to increase fuel efficiency and create a smoother idle.

During which of the following operating conditions of an auto-mobile, carbon monoxide content in exhaust gas is maximum? (1) Acceleration (2) Cruising (3) Idle running (4) Deacceleration

Description : During which of the following operating conditions of an auto-mobile, carbon monoxide content in exhaust gas is maximum? (1) Acceleration (2) Cruising (3) Idle running (4) Deacceleration

Last Answer : (3) Idle running Explanation: High Carbon Monoxide (CO) content in exhaust gas of automobiles usually indicate a fuel mixture richer than ideal (rich mixture - air fuel ratio below 14.7).

The load sharing characteristics of two diesel alternators operating in parallel are directly related to the setting of their governors' ____________. A. load limit B. idle speed C. speed limit D. speed droop

Description : The load sharing characteristics of two diesel alternators operating in parallel are directly related to the setting of their governors' ____________. A. load limit B. idle speed C. speed limit D. speed droop

Last Answer : Answer: D

The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual magnetism C. kept warm by using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Description : The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual ... using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Last Answer : Answer: C

If deck machinery is expected to be idle for an extended period of time you should____________. A. have electrical safety gloves available in case of electrical shock before running B. perform a 'high pot' test to determine the condition of the insulation C. water wash the motor and controller to remove any salt that may interfere with smooth operation D. check run at regular intervals to inusre correct operation and to renew the internal coating of lubrication

Description : If deck machinery is expected to be idle for an extended period of time you should____________. A. have electrical safety gloves available in case of electrical shock before running B. perform ... run at regular intervals to inusre correct operation and to renew the internal coating of lubrication

Last Answer : Answer: D

Moisture absorbed in the windings or condensed on the surface of electrical machinery insulation ________. A. is good for long term preserving since most insulation is organic and contains some amount B. lowers the insulation value and is a common cause of fault grounds in idle machines C. will enhance insulation resistance only if it is fresh water and contains no salt D. reduces the amount of current supplied or drawn by the machine so horsepower is limited

Description : Moisture absorbed in the windings or condensed on the surface of electrical machinery insulation ________. A. is good for long term preserving since most insulation is organic and contains some amount B. ... D. reduces the amount of current supplied or drawn by the machine so horsepower is limited

Last Answer : Answer: B

Nickel-cadmium storage batteries are superior to lead-acid batteries because they __________. A. put out higher voltages and require no maintenance B. can remain idle and keep a full charge for a long time C. need fewer cells in series and use less mounting space D. all of the above

Description : Nickel-cadmium storage batteries are superior to lead-acid batteries because they __________. A. put out higher voltages and require no maintenance B. can remain idle and keep a full charge for a long time C. need fewer cells in series and use less mounting space D. all of the above

Last Answer : Answer: B

When an alternator is to remain idle for even a few days _________________. A. lift the brushes and disconnect the pigtails B. insulate the collector rings with strips of cardboard C. energize the heater circuit D. open the equalizing bus disconnect switch

Description : When an alternator is to remain idle for even a few days _________________. A. lift the brushes and disconnect the pigtails B. insulate the collector rings with strips of cardboard C. energize the heater circuit D. open the equalizing bus disconnect switch

Last Answer : Answer: C

Which of the following statements concerning nickel-cadmium batteries is true? A. When mixing electrolyte always add acid to the water. B. Nickel-cadmium batteries can be charged and discharged only a limited number of times without damage to the cells. C. Nickel-cadmium batteries can be stored for a long time and still keep a full charge without additional charging. D. The electrolyte of an idle nickel-cadmium battery must be replaced monthly to maintain battery condition.

Description : Which of the following statements concerning nickel-cadmium batteries is true? A. When mixing electrolyte always add acid to the water. B. Nickel-cadmium batteries can be charged and ... The electrolyte of an idle nickel-cadmium battery must be replaced monthly to maintain battery condition.

Last Answer : Answer: C

The load sharing characteristics of two diesel generators operating in parallel are mostly dependent on their governor ____________. A. load limit settings B. idle speed settings C. speed limit settings D. speed droop settings

Description : The load sharing characteristics of two diesel generators operating in parallel are mostly dependent on their governor ____________. A. load limit settings B. idle speed settings C. speed limit settings D. speed droop settings

Last Answer : Answer: D

The greatest detrimental effect on idle electrical equipment, such as cargo pump motors, is the _____________. A. loss of residual magnetism B. absorption of moisture in the insulation C. insulation varnish flaking D. dirt collecting on the windings

Description : The greatest detrimental effect on idle electrical equipment, such as cargo pump motors, is the _____________. A. loss of residual magnetism B. absorption of moisture in the insulation C. insulation varnish flaking D. dirt collecting on the windings

Last Answer : Answer: B

)Which of the following is NOT one of the primary needs for good project scheduling? 1. Cutting costs and reducing time 2. Decreasing the time required for decision making 3. Eliminating idle time 4. Developing better trouble shooting procedures.

Description : )Which of the following is NOT one of the primary needs for good project scheduling? 1. Cutting costs and reducing time  2. Decreasing the time required for decision making  3. Eliminating idle time  4. Developing better trouble shooting procedures.

Last Answer : 4. Developing better trouble shooting procedures.

The speed at which resonance occurs is called A. Normal Speed B. Idle Speed C. Critical Speed D. None

Description : The speed at which resonance occurs is called A. Normal Speed B. Idle Speed C. Critical Speed D. None

Last Answer : C. Critical Speed

Time required to complete one cycle is known as A. Idle time B. Periodic time C. Both D. None

Description : Time required to complete one cycle is known as A. Idle time B. Periodic time C. Both D. None

Last Answer : B. Periodic time

Inthe _______method, after thestation finds the line idle it sends or refrainfrom sending based on the outcome ofa random number generator. If the line is busy, it tries againA)nonpersistentB)1-persistentC)p-persistentD)none of the above

Description : Inthe _______method, after thestation finds the line idle it sends or refrainfrom sending based on the outcome ofa random number generator. If the line is busy, it tries again A) nonpersistent B) 1-persistent C) p-persistent D) none of the above

Last Answer : p-persistent

Inthe ________method, a stationthat has a frame tosend senses the line. If the line is idle, it sends immediately. If theline is not idle, it waits a random amount of time and then senses the line again. A) nonpersistent B) 1-persistent C) p-persistent D) none of the above

Description : Inthe ________method, a stationthat has a frame tosend senses the line. If the line is idle, it sends immediately. If theline is not idle, it waits a random amount of time and then senses the line again. A) nonpersistent B) 1-persistent C) p-persistent D) none of the above

Last Answer : nonpersistent

Inthe _________ method, after the station finds the lineidle, it sends its frame immediately. If the line isnot idle, it continuously senses theline until it finds it idle. A) nonpersistent B) 1-persistent C) p-persistent D) none of the above

Description : Inthe _________ method, after the station finds the lineidle, it sends its frame immediately. If the line isnot idle, it continuously senses theline until it finds it idle. A) nonpersistent B) 1-persistent C) p-persistent D) none of the above

Last Answer : 1-persistent

An anticipated result from multiprogramming operations is: A. reducedcomputer idle time B. the handling of more jobs C. better schedulingof work D. All of theabove E. None of the above

Description : An anticipated result from multiprogramming operations is: A. reducedcomputer idle time B. the handling of more jobs C. better schedulingof work D. All of theabove E. None of the above

Last Answer : All of theabove

During which of the following operating conditions of an automobile, carbon monoxide content in the exhaust gas is maximum? (A) Idle running (B) Acceleration (C) Cruising (D) Deceleration

Description : During which of the following operating conditions of an automobile, carbon monoxide content in the exhaust gas is maximum? (A) Idle running (B) Acceleration (C) Cruising (D) Deceleration

Last Answer : (A) Idle running

A company wants to build a test environment to test software updates and new solutions. The environment should mirror the production environment and be secure and inaccessible from outside the company network. The company does not want to invest in infrastructure that may be idle for a significant amount of time. Which cloud computing model will satisfy all these requirements? A. Public Cloud B. Private Cloud C. External Cloud D. Virtual Private Cloud

Description : A company wants to build a test environment to test software updates and new solutions. The environment should mirror the production environment and be secure and inaccessible from outside the company ... requirements? A. Public Cloud B. Private Cloud C. External Cloud D. Virtual Private Cloud

Last Answer : Virtual Private Cloud

How Cloud Federation provides benefits to Cloud providers? a) allows providers to earn revenue from computing resources that would otherwise be idle or underutilized b) enables cloud providers to expand their geographic footprints and accommodate sudden spikes in demand without having to build new points-of-presence (POPs) c) establish extensions of their customer-facing service-level agreements (SLAs) into their partner provider's data centers. d) All the above

Description : How Cloud Federation provides benefits to Cloud providers? a) allows providers to earn revenue from computing resources that would otherwise be idle or underutilized b) enables cloud providers to expand their ... -level agreements (SLAs) into their partner provider's data centers. d) All the above

Last Answer : All the above

Scheduling provides information about the (A) Proper utilisation of machines (B) Means to minimise idle time for machines (C) Time of completion of job (D) Time of starting of job and also about how much work should be completed during a particular period

Description : Scheduling provides information about the (A) Proper utilisation of machines (B) Means to minimise idle time for machines (C) Time of completion of job (D) Time of starting of job and also about how much work should be completed during a particular period

Last Answer : (D) Time of starting of job and also about how much work should be completed during a particular period

While the bin cards are used in the effective stores management, the queuing theory is associated with the __________ time. (A) Waiting (B) Idle (C) Inspection (D) Tool replacement

Description : While the bin cards are used in the effective stores management, the queuing theory is associated with the __________ time. (A) Waiting (B) Idle (C) Inspection (D) Tool replacement

Last Answer : A) Waiting

Call request signal is: (A) Seize signal (B) Idle state signal (C) Line identification signal (D) Called subscriber alert signal

Description : Call request signal is: (A) Seize signal (B) Idle state signal (C) Line identification signal (D) Called subscriber alert signal

Last Answer : (A) Seize signal

Select the option that is most nearly OPPOSITE in meaning to the given word. Scurry (a) Bustle (b) Scamper (c) Linger (d) Idle

Description : Select the option that is most nearly OPPOSITE in meaning to the given word. Scurry (a) Bustle (b) Scamper (c) Linger (d) Idle

Last Answer : (c) Linger

When does the engine High Pressure fuel shut off valve close? a. After a booster pump failure b. When the engine fuel switch is selected ‘ON’ during engine start c. When flight idle is selected d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Description : When does the engine High Pressure fuel shut off valve close? a. After a booster pump failure b. When the engine fuel switch is selected ‘ON’ during engine start c. When flight idle is selected d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Last Answer : d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

If you press the ACB Close button on an idle generator what will happen?

Description : If you press the ACB Close button on an idle generator what will happen?

Last Answer : Ask E/O. Normally, the breaker won’t close until you synchronise, so even if you press the breaker close, it will not close. The breaker has under-voltage protection which will not let you close it.

When does the engine High Pressure fuel shut off valve close? a. After a booster pump failure b. When the engine fuel switch is selected ‘ON’ during engine start c. When flight idle is selected d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Description : When does the engine High Pressure fuel shut off valve close? a. After a booster pump failure b. When the engine fuel switch is selected ‘ON’ during engine start c. When flight idle is selected d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Last Answer : d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

. A job is budgeted to require 3,300 productive hours after incurring 25% idle time. If the total labour cost budgeted for the job is Rs36,300. What is the labour cost per hour( to the nearest cent)? (a) Rs 8.25 (b) Rs 8.80 (c) Rs 11.00 (d) Rs 14.67

Description : . A job is budgeted to require 3,300 productive hours after incurring 25% idle time. If the total labour  cost budgeted for the job is Rs36,300. What is the labour cost per hour( to the nearest cent)? (a) Rs 8.25 (b) Rs 8.80 (c) Rs 11.00 (d) Rs 14.67

Last Answer : (a) Rs 8.25