With the DPI method of inspection after the contact time has elapsed the dye should be removed by: a) Spraying the surface with the remover till all dye has gone then wipe with clean cloth b) Spraying with the developer then wiping with a cloth c) Wipe clean, using a clean cloth soaked in a solvent remover d) it doesn’t matter how it is done as long as all traces of dye are removed

With the DPI method of inspection after the contact time has elapsed the dye should be removed by:
a) Spraying the surface with the remover till all dye has gone then wipe with clean cloth
b) Spraying with the developer then wiping with a cloth
c) Wipe clean, using a clean cloth soaked in a solvent remover
d) it doesn’t matter how it is done as long as all traces of dye are removed
by

1 Answer

Answer :

c) Wipe clean, using a clean cloth soaked in a solvent remover
by

Related questions

Grease coatings on electrical contact surfaces increase contact resistance and should be removed with a/an _______________. A. small wire brush B. compressed air jet C. clean dry cloth D. 10% solution carbon solvent and water

Description : Grease coatings on electrical contact surfaces increase contact resistance and should be removed with a/an _______________. A. small wire brush B. compressed air jet C. clean dry cloth D. 10% solution carbon solvent and water

Last Answer : Answer: C

Which of the following represents the accepted method of cleaning dust and foreign particles from electrical equipment while limiting damage to electric components? A. Carefully wiping off the components with a soft cotton rag. B. Blowing a high velocity stream of compressed air rapidly across the components. C. Using a vacuum cleaner to remove debris from the components. D. Using carbon tetrachloride as a cleaning solvent to clean the components.

Description : Which of the following represents the accepted method of cleaning dust and foreign particles from electrical equipment while limiting damage to electric components? A. Carefully wiping off the components ... the components. D. Using carbon tetrachloride as a cleaning solvent to clean the components.

Last Answer : Answer: C

Controller contacts should be routinely cleaned by ________. A. blowing with compressed air B. filing with a bastard file C. wiping with a clean dry cloth D. dressing with crocus cloth

Description : Controller contacts should be routinely cleaned by ________. A. blowing with compressed air B. filing with a bastard file C. wiping with a clean dry cloth D. dressing with crocus cloth

Last Answer : Answer: C

NERD ALERT: In Star Wars, how is the concept of wiping away all traces of the dark side, considered "balance"?

Description : NERD ALERT: In Star Wars, how is the concept of wiping away all traces of the dark side, considered "balance"?

Last Answer : Well isn't there an entire planet that is Sith? Sorry I'm trying to answer this from something I read up on almost a decade ago just I remember in the Star Wars fluff that there's a ... asteroid field that is pretty much entirely populated by Sith, which may be enough evil for the entire galaxy.

Wiping with a mop or classic cloth

Description : Does anyone have a mop with those fringes? What soaks in the water and then we squeeze into that basket? If you can wipe it better than with a normal cloth.

Last Answer : Probably yes, it wipes better with a mop. Whether it's the one with fringes or the one with a replaceable cover, it can also squeeze. The problem is keeping the part that wipes clean. Hair and hairs stick ... put it in the washing machine and put the washing machine on me. Rags don't do any of this.

Why is it called a wiping corridor inspection?

Description : My neighbor tells me, you have an inspection next week. And he means wiping the hallway. Why is it called that?

Last Answer : What about asking neighbors? I've never heard of anything like wiping a hallway.

Bleaching of a fabric cloth is done using A and excess of chlorine is removed using B.A and B are :

Description : Bleaching of a fabric cloth is done using A and excess of chlorine is removed using B.A and B are :

Last Answer : Bleaching of a fabric cloth is done using A and excess of chlorine is removed using B.A and B are : A. `CaOCl_( ... D. `CaOCl_(2), Na_(2) S_(2)O_(3)`

Bleaching of a fabric cloth is done using A and excess of chlorine is removed using B.A and B are :

Description : Bleaching of a fabric cloth is done using A and excess of chlorine is removed using B.A and B are :

Last Answer : Bleaching of a fabric cloth is done using A and excess of chlorine is removed using B.A and B are : A. `CaOCl_( ... D. `CaOCl_(2), Na_(2) S_(2)O_(3)`

Oxide layer formed on the non-ferrous metal surface after its annealing is (A) Removed by acid pickling (B) Hammered into the surface (C) Removed with coarse emery cloth

Description : Oxide layer formed on the non-ferrous metal surface after its annealing is (A) Removed by acid pickling (B) Hammered into the surface (C) Removed with coarse emery cloth

Last Answer : Option A

Can I use hair dye without mixing it with developer?

Description : Can I use hair dye without mixing it with developer?

Last Answer : Unlikely..

Which of the following procedures should be used to maintain a large electric motor during periods of inactivity? A. A thin layer of air-drying varnish should be applied on the windings. B. Compressed air should be blown over areas where dust is deposited. C. Spraying a solvent periodically to remove carbon dust. D. Space heaters should be used to prevent condensation of moisture.

Description : Which of the following procedures should be used to maintain a large electric motor during periods of inactivity? A. A thin layer of air-drying varnish should be applied on the windings. B. ... periodically to remove carbon dust. D. Space heaters should be used to prevent condensation of moisture.

Last Answer : Answer: D

Which of the listed precautions should be observed before spraying liquid solvent on the insulation of an electric motor? A. Slow the motor down to low speed. B. Disconnect the motor from the power source. C. Secure all ventilation in the area. D. Preheat the insulation to assist in cleaning.

Description : Which of the listed precautions should be observed before spraying liquid solvent on the insulation of an electric motor? A. Slow the motor down to low speed. B. Disconnect the motor from the power source. C. Secure all ventilation in the area. D. Preheat the insulation to assist in cleaning.

Last Answer : Answer: B

With which of the following NDE processes is it possible to detect both surface and slight subsurface defects up to 2mm below the surface a) Visual b) Dye Penetrant c) Magnetic Particle using DC d) Magnetic particle using AC

Description : With which of the following NDE processes is it possible to detect both surface and slight subsurface defects up to 2mm below the surface a) Visual b) Dye Penetrant c) Magnetic Particle using DC d) Magnetic particle using AC

Last Answer : c) Magnetic Particle using DC

In the activated sludge process A. Aeration is continued till stability B. Aeration is done with an admixture of previously aerated sludge C. Sludge is activated by constant stirring D. Water is removed by centrifugal action

Description : In the activated sludge process A. Aeration is continued till stability B. Aeration is done with an admixture of previously aerated sludge C. Sludge is activated by constant stirring D. Water is removed by centrifugal action

Last Answer : ANS: B

can you please tell me if you can wipe mold off the walls and the walls then look clean?

Description : can you please tell me if you can wipe mold off the walls and the walls then look clean?

Last Answer : Well you can wipe the mold off but it will still have a dirty look to it. Also the mold is inside the wall too and it will just regrow over the wall again.

Why is it essential to clean the excess weld metal on completion of the production weld? a) So it can be ready for painting b) To remove any rust c) To ensure it is suitably clean for visual inspection and NDT d) To remove slag from the undercut

Description : Why is it essential to clean the excess weld metal on completion of the production weld? a) So it can be ready for painting b) To remove any rust c) To ensure it is suitably clean for visual inspection and NDT d) To remove slag from the undercut

Last Answer : c) To ensure it is suitably clean for visual inspection and NDT

When troubleshooting a console circuit card suspected of being faulty, first check operating voltages, clean the card and then _________________. A. make sure wired connections and push-on connectors are tight B. test each resistor and capacitor on the card with an ohmmeter C. check the continuity of all printed circuit traces with an ohmmeter D. measure the gain of each transistor or integrated circuit

Description : When troubleshooting a console circuit card suspected of being faulty, first check operating voltages, clean the card and then _________________. A. make sure wired connections and push-on connectors ... circuit traces with an ohmmeter D. measure the gain of each transistor or integrated circuit

Last Answer : Answer: A

Testing of welds by a) Dye penetrant test b) Magnetic particle inspection c) Radiographic inspection d) All the above*

Description : Testing of welds by a) Dye penetrant test b) Magnetic particle inspection c) Radiographic inspection d) All the above*

Last Answer : d) All the above

Traces of tar fog present in the coke oven gas is removed by (A) Cyclone separator (B) Wet packed scrubber (C) Electrostatic precipitator (D) Washing with monoethanolamine

Description : Traces of tar fog present in the coke oven gas is removed by (A) Cyclone separator (B) Wet packed scrubber (C) Electrostatic precipitator (D) Washing with monoethanolamine

Last Answer : (C) Electrostatic precipitator

When using a spray can of compressed air/gas to clean your PC is it harmful to your computer when it comes out liquid when spraying?

Description : When using a spray can of compressed air/gas to clean your PC is it harmful to your computer when it comes out liquid when spraying?

Last Answer : answer:Not really, Just don't hold the can upside down or sideways if you can help it. There is a chance that it can discolor some plastics but otherwise don't worry about it. Duster is ... that is very unlikely. During gaming spec competitions they use liquid nitrogen as a CPU and GPU heatsink.

Physically and/or chemically speaking, how did I ruin my CD by attempting to clean it with non-acetone nail polish remover?

Description : Physically and/or chemically speaking, how did I ruin my CD by attempting to clean it with non-acetone nail polish remover?

Last Answer : What is in your solvent. Did it “frost” the surface?

How would you clean out a washing machine after using it to dye clothes?

Description : How would you clean out a washing machine after using it to dye clothes?

Last Answer : Run it through the whole cycle with bleach.

What is the recommended minimum range of illumination required by BS EN 970 for inspection of a welded surface? a) 90 to 125 lux b) 150 to 250 lux c) 350 to 500 lux d) 35 to 50 lux

Description : What is the recommended minimum range of illumination required by BS EN 970 for inspection of a welded surface? a) 90 to 125 lux b) 150 to 250 lux c) 350 to 500 lux d) 35 to 50 lux

Last Answer : c) 350 to 500 lux

To assess the surface of a weld for direct inspection, the distance from the surface to eye should be a maximum of? a) 200mm b) 600mm c) 60mm d) 6000mm

Description : To assess the surface of a weld for direct inspection, the distance from the surface to eye should be a maximum of? a) 200mm b) 600mm c) 60mm d) 6000mm

Last Answer : b) 600mm

Acetone is to be removed from air in an isothermal dilute absorber using pure water as solvent. The incoming air contains 5 mole% of acetone (yin = 0.05). The design equation to be used for obtaining the number of trays (N) of the absorber is, N+2 = 6 log (yin /yout ).For 98% recovery of acetone, the number of trays required is/are: (A) 4 (B) 8 (C) 9 (D) 10

Description : Acetone is to be removed from air in an isothermal dilute absorber using pure water as solvent. The incoming air contains 5 mole% of acetone (yin = 0.05). The design equation to be used for obtaining the number of trays ( ... of acetone, the number of trays required is/are: (A) 4 (B) 8 (C) 9 (D) 10

Last Answer : (C) 9

How does a blind person know when they are done wiping?

Description : How does a blind person know when they are done wiping?

Last Answer : For the record, we’re talking about toliet paper and poo right? I don’t want to answer a question assuming its about poo and have it really be about something else…

A application method to avoid herbicide drift a).Misting b).Wick wiping c).Foliar spray d).Basal barking

Description : A application method to avoid herbicide drift a).Misting b).Wick wiping c).Foliar spray d).Basal barking

Last Answer : b).Wick wiping

How do I wipe my old IPhone 5 clean before selling it?

Description : How do I wipe my old IPhone 5 clean before selling it?

Last Answer : answer:Settings -> General -> Reset (it is all the way at the bottom) -> Erase all Content and Settings If you have a computer with iTunes on it you can plug the phone in and Reinstall iOS if you are paranoid. http://i.imgur.com/wYg59Ox.png

Have you ever taken a "clean wipe" poo?

Description : Have you ever taken a "clean wipe" poo?

Last Answer : Why on earth are you asking this?!!

There is a big BOOM in your home, upon inspection you find 1/3 of your home is gone, your first thoughts are?

Description : There is a big BOOM in your home, upon inspection you find 1/3 of your home is gone, your first thoughts are?

Last Answer : Tornado’s.

__________ mean diameter of particles is given by Σ (xi /Dpi ⃗) (A) Mass (B) Volume (C) Arithmetic (D) Volume surface

Description : __________ mean diameter of particles is given by Σ (xi /Dpi ⃗) (A) Mass (B) Volume (C) Arithmetic (D) Volume surface

Last Answer : (B) Volume

1. How can a Change in distribution of powers between the Centre and the States be done? 2. Which acid is used to remove ink and rust stains and cloth? 3. Which forms the largest share of deficit in Govt. of India budget? 4. 97% of the atmosphere lies with in howmany kilometers of the surface of the earth? 5. By virtue of which Act, dyarchy was introduced in India?

Description : 1. How can a Change in distribution of powers between the Centre and the States be done? 2. Which acid is used to remove ink and rust stains and cloth? 3. Which forms the largest share of deficit ... ? 19. Which states is the leading producer of tea? 20. Who was a contemporary of Chinghiz Khan?

Last Answer : Answer : 1. Amending the Constitution 2. Oxalic acid 3. Fiscal deficit 4. 5 km 5. Government of India Act, 1919 6. Ben Okri 7. Nucleolus 8. 73rd 9. East Africa 10. Lichhavi 11. By observing ... Indus and Jhelum 16. Cytochromes 17. From the date of its first meeting 18. Silver 19. Assam 20. Iltutmish

The nearly constant rate of infiltration that develops after some time has elapsed from the start of irrigation is termed as? [a] Infiltration rate [b] Infiltration velocity [c] Basic Infiltration rate [d] Constant infiltration velocity [e] None of the above

Description : The nearly constant rate of infiltration that develops after some time has elapsed from the start of irrigation is termed as? [a] Infiltration rate [b] Infiltration velocity [c] Basic Infiltration rate [d] Constant infiltration velocity [e] None of the above

Last Answer : [c] Basic Infiltration rate

What is the time elapsed after a batch is created? a) 0.5 seconds b) 0.05 seconds c) 1.5 seconds d) 1 second

Description : What is the time elapsed after a batch is created? a) 0.5 seconds b) 0.05 seconds c) 1.5 seconds d) 1 second

Last Answer : 0.05 seconds

When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction of all wall is similar for best retention B. No, proximal reduction is greater to allow the crown to pass the contact area C. No, the buccal surfaces has the greatest reduction to remove the cervical bulge D. Yes, all undercuts are uniformly removed so that the steel crown can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Description : When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction ... can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Last Answer : B. No, proximal reduction is greater to allow the crown to pass the contact area

(3) reflection of light due to the presence of free electrons Explanation: Lustre (or luster) is the way light interacts with the surface of a crystal, rock, or mineral. The word traces its origins back to the latin lux, meaning "light", and generally implies radiance, gloss, or brilliance. Metals in general have high electrical conductivity, high thermal conductivity, and high density. Typically they are malleable and ductile, deforming -under stress without cleaving.

Description : (3) reflection of light due to the presence of free electrons Explanation: Lustre (or luster) is the way light interacts with the surface of a crystal, rock, or mineral. The word ... conductivity, and high density. Typically they are malleable and ductile, deforming -under stress without cleaving.

Last Answer : Cloud is a colloidal dispersion of – (1) Air in a dispersion medium of water (2) Fog in a dispersion medium of water (3) Mist in a dispersion medium of air (4) Water drops in a dispersion medium of air

Which is the most suitable method for removing the traces of water from ethanol ?

Description : Which is the most suitable method for removing the traces of water from ethanol ?

Last Answer : Which is the most suitable method for removing the traces of water from ethanol ? A. Heating with Na ... C. Distilling it with CaO D. Reacting with Mg

What takes more total elapsed time? Torrenting sequentially or torrenting simultaneously?

Description : What takes more total elapsed time? Torrenting sequentially or torrenting simultaneously?

Last Answer : Theoretically, it should not make a difference. But practically, assuming sequential downloading, the torrents may not all download at full speed, due to seed and peer differences between them, so downloading simultaneously should be faster.

How much time is elapsed between the original tape date and the air date on Wheel of Fortune?

Description : How much time is elapsed between the original tape date and the air date on Wheel of Fortune?

Last Answer : I went to see Jeopardy at Radio City Music Hall and the did four episodes in one day. It took about two months before they were aired. I would think WoF would be similar.

What do you call the phenomenon in digital circuits that describe the duration of time a digital signal passes a circuit? A. Transmission time B. Elapsed time C. Propagation delay D. Travel delay

Description : What do you call the phenomenon in digital circuits that describe the duration of time a digital signal passes a circuit? A. Transmission time B. Elapsed time C. Propagation delay D. Travel delay

Last Answer : C. Propagation delay

When the batch is created, it begins a countdown that publishes the batch once sufficient time has elapsed. a) True b) False

Description : When the batch is created, it begins a countdown that publishes the batch once sufficient time has elapsed. a) True b) False

Last Answer : True

What is the Total Elapsed Time on a VFR flight plan? a. From take-off to overhead destination b. From take-off to overhead destination + 15 mins c. From take-off to landing d. From taxi to arrival on the gate

Description : What is the Total Elapsed Time on a VFR flight plan? a. From take-off to overhead destination b. From take-off to overhead destination + 15 mins c. From take-off to landing d. From taxi to arrival on the gate

Last Answer : a. From take-off to overhead destination

What is the Total Elapsed Time on a VFR flight plan? a. From take-off to overhead destination b. From take-off to overhead destination + 15 mins c. From take-off to landing d. From taxi to arrival on the gate

Description : What is the Total Elapsed Time on a VFR flight plan? a. From take-off to overhead destination b. From take-off to overhead destination + 15 mins c. From take-off to landing d. From taxi to arrival on the gate

Last Answer : a. From take-off to overhead destination

The nurse advises the patient undergoing photodynamic therapy (PDT) for macular degeneration to avoid exposure to direct sunlight or bright lights for a) the first five days after the procedure. Photodynamic therapy includes the use of verteporfin, a light-activated dye. The dye within the blood vessels near the surface of the skin could become activated with exposure to strong light, such as sunlight or bright lights. Ordinary indoor light is not a problem. The patient should be counseled to wear protective clothing, such as long-sleeved shirts, sunglasses, and wide-brimmed hats, if the patient has to go outdoors during daylight hours in the first five days post-treatment. Inadvertent sunlight exposure can lead to severe blistering of the skin and sunburn.

Description : The nurse advises the patient undergoing photodynamic therapy (PDT) for macular degeneration to avoid exposure to direct sunlight or bright lights for a) the first five days after the procedure. ... should avoid exposure to direct sunlight or bright lights for the first five days post-treatment.

Last Answer : a) the first five days after the procedure. Photodynamic therapy includes the use of verteporfin, a light-activated dye. The dye within the blood vessels near the surface of the skin could ... days post-treatment. Inadvertent sunlight exposure can lead to severe blistering of the skin and sunburn.

Ipod synching after wiping Mac?

Description : Ipod synching after wiping Mac?

Last Answer : There are programs you can buy (or, perhaps, download for free?) that “rip” the stuff on your iThing back onto any computer. Check it.

Woman of , when wiping after a pee, how far back does the tp travel?

Description : Woman of , when wiping after a pee, how far back does the tp travel?

Last Answer : It travels so far back that it could tell you who was on the grassy knoll on the 22nd of November, 1963.

Wiping dust after luxation or vice versa?

Description : Wipe dust only after luxation or vice versa?

Last Answer : After luxation. This would have the greatest effect before and after luxation.