Testing of welds by a) Dye penetrant test b) Magnetic particle inspection c) Radiographic inspection d) All the above*

Testing of welds by
a) Dye penetrant test
b) Magnetic particle inspection
c) Radiographic inspection
d) All the above*
by

1 Answer

Answer :

d) All the above
by

Related questions

With which of the following NDE processes is it possible to detect both surface and slight subsurface defects up to 2mm below the surface a) Visual b) Dye Penetrant c) Magnetic Particle using DC d) Magnetic particle using AC

Description : With which of the following NDE processes is it possible to detect both surface and slight subsurface defects up to 2mm below the surface a) Visual b) Dye Penetrant c) Magnetic Particle using DC d) Magnetic particle using AC

Last Answer : c) Magnetic Particle using DC

Tandem rig test with 450 probe for AT weld detects. (i) Horizontal longitudinal defect in weld. (ii) Vertical oriented defect in AT weld.* (iii) Transverse defect in AT weld. (iv) Defect in flange of AT welds.

Description : Tandem rig test with 450 probe for AT weld detects. (i) Horizontal longitudinal defect in weld. (ii) Vertical oriented defect in AT weld.* (iii) Transverse defect in AT weld. (iv) Defect in flange of AT welds.

Last Answer : (ii) Vertical oriented defect in AT weld.*

Who should select the specific welds for NDT, to cover the 10% contractual percentage required by the specification/Code? a) Anyone can select the welds as its just a random choice b) The welder as he knows which welds are likely to produce the least defects c) This will be referenced in the inspection and test plan d) Nobody, as welding is always carried out to a high standard the use of percentage NDT is of no real value

Description : Who should select the specific welds for NDT, to cover the 10% contractual percentage required by the specification/Code? a) Anyone can select the welds as its just a random choice b) The welder ... welding is always carried out to a high standard the use of percentage NDT is of no real value

Last Answer : c) This will be referenced in the inspection and test plan

After how much time lining of crucible should be changed ? (i) After every weld (ii) After 7 welds (iii) After every 10 welds* (iv) None of the above

Description : After how much time lining of crucible should be changed ? (i) After every weld (ii) After 7 welds (iii) After every 10 welds* (iv) None of the above

Last Answer : (iii) After every 10 welds*

What is the greatest disadvantage of radiographic inspection? a) the inability to size defects accurately b) The physical size of the equipment c) The skill level of the operator d) The harmful effects of ionizing radiation

Description : What is the greatest disadvantage of radiographic inspection? a) the inability to size defects accurately b) The physical size of the equipment c) The skill level of the operator d) The harmful effects of ionizing radiation

Last Answer : d) The harmful effects of ionizing radiation

For joints in service in the creep range which of the following is recommended by ASME B16.5? a) Replacement of the joint after 1,000,000 hours of service. b) Periodic tightening of the bolts to prevent leakage. c) Immediate replacement is recommended if the material operates in the creep range. d) Regular flow detection inspection of the piping to fitting welds.

Description : For joints in service in the creep range which of the following is recommended by ASME B16.5? a) Replacement of the joint after 1,000,000 hours of service. b) Periodic tightening of ... the material operates in the creep range. d) Regular flow detection inspection of the piping to fitting welds.

Last Answer : b) Periodic tightening of the bolts to prevent leakage.

riodicity of recording of camber in PSC girders a) Once in a year* b) Once in two years c) Once in three years d) During the detailed inspection of SE/Br.

Description : riodicity of recording of camber in PSC girders a) Once in a year* b) Once in two years c) Once in three years d) During the detailed inspection of SE/Br.

Last Answer : a) Once in a year*

Periodicity of Under water inspection a) Once in a year b) Once in two years* c) Whenever high flood occurs d) Along with detailed inspection of SE/Br

Description : Periodicity of Under water inspection a) Once in a year b) Once in two years* c) Whenever high flood occurs d) Along with detailed inspection of SE/Br

Last Answer : b) Once in two years*

Special inspection of distressed bridges Group II shall be carried out by Inspector (Concerned) is a) Once in three months* b) Once in two months c) Once in a month d) Once in six months

Description : Special inspection of distressed bridges Group II shall be carried out by Inspector (Concerned) is a) Once in three months* b) Once in two months c) Once in a month d) Once in six months

Last Answer : a) Once in three months*

Special inspection of distressed bridges shall be carried out by Asst. Engineer is a) Once in three months b) Once in two months* c) Once in a month d) Once in six months

Description : Special inspection of distressed bridges shall be carried out by Asst. Engineer is a) Once in three months b) Once in two months* c) Once in a month d) Once in six months

Last Answer : b) Once in two months*

Periodical inspection of PSC & Composite girders a) Once in 3 years b) Once in 5 years * c) Once in 2 years d) Once in 5 years

Description : Periodical inspection of PSC & Composite girders a) Once in 3 years b) Once in 5 years * c) Once in 2 years d) Once in 5 years

Last Answer : b) Once in 5 years *

Periodical inspection of Welded girders a) Once in 3 years b) Once in 3 years* c) Once in 2 years d) Once in 5 years

Description : Periodical inspection of Welded girders a) Once in 3 years b) Once in 3 years* c) Once in 2 years d) Once in 5 years

Last Answer : b) Once in 3 years*

Initial inspection for PSC girders / Welded girder bridges as per IRBM 1998 a) Within one year of installation* b) Once in 3 years d) Once in 2 years d) Once in 5 years

Description : Initial inspection for PSC girders / Welded girder bridges as per IRBM 1998 a) Within one year of installation* b) Once in 3 years d) Once in 2 years d) Once in 5 years

Last Answer : a) Within one year of installation*

Curve inspection shall be carried out by Sectional PWI a. Once in three months b. Once in six months c. Once in four months* d. None of above

Description : Curve inspection shall be carried out by Sectional PWI a. Once in three months b. Once in six months c. Once in four months* d. None of above

Last Answer : c. Once in four months

For rolling mark 60 kg/Sail/X/2010 the first testing in the field after initial testing of rails in rail manufacturing plant, will be done. (i) After test free period of 25%. (ii) After passage of every 40 GMT traffic during test free period.* (iii) After passage of 200 GMT. (iv) On the basis of annual GMT of the section.

Description : For rolling mark 60 kg/Sail/X/2010 the first testing in the field after initial testing of rails in rail manufacturing plant, will be done. (i) After test free period of 25%. (ii) After passage of every 40 ... period.* (iii) After passage of 200 GMT. (iv) On the basis of annual GMT of the section.

Last Answer : (ii) After passage of every 40 GMT traffic during test free period.*

Magnetic crack detection method in the welds is destructible examination. a) True b) False

Description : Magnetic crack detection method in the welds is destructible examination. a) True b) False

Last Answer : b) False

With the DPI method of inspection after the contact time has elapsed the dye should be removed by: a) Spraying the surface with the remover till all dye has gone then wipe with clean cloth b) Spraying with the developer then wiping with a cloth c) Wipe clean, using a clean cloth soaked in a solvent remover d) it doesn’t matter how it is done as long as all traces of dye are removed

Description : With the DPI method of inspection after the contact time has elapsed the dye should be removed by: a) Spraying the surface with the remover till all dye has gone then wipe with clean cloth b) Spraying with ... remover d) it doesn't matter how it is done as long as all traces of dye are removed

Last Answer : c) Wipe clean, using a clean cloth soaked in a solvent remover

In India soils are classified by a) MIT classification b) Unified soil classification system* c) International classification system d) Particle size classification

Description : In India soils are classified by a) MIT classification b) Unified soil classification system* c) International classification system d) Particle size classification

Last Answer : b) Unified soil classification system*

During periodic testing of an AT weld with 700 probe, a bunch of moving signals of less than 40% but more than 10% is observed in the head of weld, the joint will be. (i) Good joint.* (ii) DFWR (iii) DFWO (iv) OBSW

Description : During periodic testing of an AT weld with 700 probe, a bunch of moving signals of less than 40% but more than 10% is observed in the head of weld, the joint will be. (i) Good joint.* (ii) DFWR (iii) DFWO (iv) OBSW

Last Answer : i) Good joint.*

On Rajdhani routes testing frequency of rail testing for rail section of 60kg with annual GMT 80, will be. (i) 4 months (ii) 1 1⁄2 months (iii) 1 months* (iv) None of above.

Description : On Rajdhani routes testing frequency of rail testing for rail section of 60kg with annual GMT 80, will be. (i) 4 months (ii) 1 1⁄2 months (iii) 1 months* (iv) None of above.

Last Answer : (iii) 1 months*

Addition gain of 10 db is used for testing. (i) ‘D’ marked rails on single lines. (ii) ‘D’ marked rails on double lines. (iii) Testing on single line and ‘D’ marked rails on double/multiple lines section.* (iv) None of above.

Description : Addition gain of 10 db is used for testing. (i) ‘D’ marked rails on single lines. (ii) ‘D’ marked rails on double lines. (iii) Testing on single line and ‘D’ marked rails on double/multiple lines section.* (iv) None of above.

Last Answer : (iii) Testing on single line and ‘D’ marked rails on double/multiple lines section.*

Total no. of probes fitted on digital double rail tester for rail testing are (i) 12 (ii) 8 (iii) 14* (iv) 16.

Description : Total no. of probes fitted on digital double rail tester for rail testing are (i) 12 (ii) 8 (iii) 14* (iv) 16.

Last Answer : (iii) 14*

By 00 probe in AT weld testing with normal gain setting. (i) Area below N.axis can be tested. (ii) Area below N.axis can not be tested.* (iii) Only web below N.axis can be tested. (iv) All above are correct.

Description : By 00 probe in AT weld testing with normal gain setting. (i) Area below N.axis can be tested. (ii) Area below N.axis can not be tested.* (iii) Only web below N.axis can be tested. (iv) All above are correct.

Last Answer : (ii) Area below N.axis can not be tested.*

USFD testing of new AT weld will be done by ? (i) JE/SSE sectional (ii) Incharge SSE (iii) USFD machine operator* (iv) None of the above

Description : USFD testing of new AT weld will be done by ? (i) JE/SSE sectional (ii) Incharge SSE (iii) USFD machine operator* (iv) None of the above

Last Answer : (iv) None of the above

After declare good in USFD testing what is the joggling criteria ? (i) Joggle will be open from the AT weld* (ii) Joggling with two far end bolting (iii) joggling with four tight bold (iv) None of the above

Description : After declare good in USFD testing what is the joggling criteria ? (i) Joggle will be open from the AT weld* (ii) Joggling with two far end bolting (iii) joggling with four tight bold (iv) None of the above

Last Answer : (i) Joggle will be open from the AT weld*

What is the testing frequency of new AT weld ? (i) Just after the welding (ii) After 7 days of welding (iii) With in the one month of welding* (iv) None of the above

Description : What is the testing frequency of new AT weld ? (i) Just after the welding (ii) After 7 days of welding (iii) With in the one month of welding* (iv) None of the above

Last Answer : iii) With in the one month of welding*

Till USFD testing of new AT weld what is criteria for joggling ? (i) Joggling with two far end bold (ii) Joggling with two tight clamps* (iii) Leave without joggling till its testing (iv) None of the above

Description : Till USFD testing of new AT weld what is criteria for joggling ? (i) Joggling with two far end bold (ii) Joggling with two tight clamps* (iii) Leave without joggling till its testing (iv) None of the above

Last Answer : (ii) Joggling with two tight clamps*

The weight of rivet testing hammer is

Description : The weight of rivet testing hammer is

Last Answer : 110 gm

What is full form of SPURT car a. Self propelled ultrasonic rail testing car* b. Self pulled united rail testing car c. Self pumped universal testing car d. None of above

Description : What is full form of SPURT car a. Self propelled ultrasonic rail testing car* b. Self pulled united rail testing car c. Self pumped universal testing car d. None of above

Last Answer : a. Self propelled ultrasonic rail testing car*

Radiographic ‘Shenton’s Line’ is observed in respect of which joint Options: 1) Hip Joint 2) Knee Joint 3) Shoulder Joint 4) Elbow Joint

Description : Radiographic ‘Shenton’s Line’ is observed in respect of which joint Options: 1) Hip Joint 2) Knee Joint 3) Shoulder Joint 4) Elbow Joint

Last Answer : Correct Answer: 1) Hip Joint

Which of the following defects are unlikely to be detected by normal radiographic technique? a) Intergranular corrosion cracking b) Porosity c) Slag d) Lack of penetration

Description : Which of the following defects are unlikely to be detected by normal radiographic technique? a) Intergranular corrosion cracking b) Porosity c) Slag d) Lack of penetration

Last Answer : a) Intergranular corrosion cracking

When is it acceptable for the patient to hold radiographic film packet in the patient’s mouth: A. Patient is very young and cannot understand direction B. Patient is physically handicapped and unable to hold the film C. Film should never be held by the dentist D. There is a lack of time and radiograph is essential

Description : When is it acceptable for the patient to hold radiographic film packet in the patient's mouth: A. Patient is very young and cannot understand direction B. Patient is physically handicapped and unable to ... never be held by the dentist D. There is a lack of time and radiograph is essential

Last Answer : C. Film should never be held by the dentist

Where is the narrowest part of the pulp: A. At the radiographic apex B. At the dentino-enamel junction C. At the orifices

Description : Where is the narrowest part of the pulp: A. At the radiographic apex B. At the dentino-enamel junction C. At the orifices

Last Answer : A. At the radiographic apex

Which of the following is a radiographic feature of dentino-genesis imperfecta: A. Small pulp chambers and root canals, normal enamel B. Enamel is missing but dentine formation is normal C. Enamel and dentine show disturbances D. Pulp is normal but dentine is abnormal

Description : Which of the following is a radiographic feature of dentino-genesis imperfecta: A. Small pulp chambers and root canals, normal enamel B. Enamel is missing but dentine formation is normal C. Enamel and dentine show disturbances D. Pulp is normal but dentine is abnormal

Last Answer : A. Small pulp chambers and root canals, normal enamel

.Which radiographic method would you use in assessing periodontal conditions and lesions: A. Bitewing B. Periapical C. Occlusal D. Panoramic

Description : .Which radiographic method would you use in assessing periodontal conditions and lesions: A. Bitewing B. Periapical C. Occlusal D. Panoramic

Last Answer : B. Periapical

Following are the phases of Project Management Life Cycle. Arrange them in correct order 1. Design, 2. Marketing, 3. Analysis and evaluation, 4. Inspection, testing and delivery (A) 3-2-1-4 (B) 1-2-3-4 (C) 2-3-1-4 (D) 4-3-2-1

Description : Following are the phases of Project Management Life Cycle. Arrange them in correct order 1. Design, 2. Marketing, 3. Analysis and evaluation, 4. Inspection, testing and delivery (A) 3-2-1-4 (B) 1-2-3-4 (C) 2-3-1-4 (D) 4-3-2-1

Last Answer : (A) 3-2-1-4

. In project management, the term quality is best defined as: a. inspection, testing and measurement. b. reviews and audits. c. fitness for purpose of deliverables. d. professionally-bound project reports.

Description : . In project management, the term quality is best defined as: a. inspection, testing and measurement. b. reviews and audits. c. fitness for purpose of deliverables. d. professionally-bound project reports.

Last Answer : c. fitness for purpose of deliverables.

Following are the phases of Project Management Life Cycle. Arrange (B) 1-2-3-4 (C) 2-3-1-4 (D) 4-3-2-1them in correct order 1. Design, 2. Marketing, 3. Analysis and evaluation, 4. Inspection, testing and delivery (A) 3-2-1-4

Description : Following are the phases of Project Management Life Cycle.  Arrange them in correct order 1. Design, 2. Marketing, 3. Analysis and evaluation, 4. Inspection, testing and delivery  (A) 3-2-1-4 (B) 1-2-3-4 (C) 2-3-1-4 (D) 4-3-2-1

Last Answer : (D) 4-3-2-1

In project management, the term quality is best defined as: a. inspection, testing and measurement. b. reviews and audits. c. fitness for purpose of deliverables. d. professionally-bound project reports.

Description : In project management, the term quality is best defined as:  a. inspection, testing and measurement.  b. reviews and audits.  c. fitness for purpose of deliverables.  d. professionally-bound project reports.

Last Answer : c. fitness for purpose of deliverables.

At a work site, statistical quality control of concrete means (A) Measurement of risks to eliminate failures (B) Applying the theory' of probability to sample testing or inspection (C) Reduction in wastage of inspection costs (D) Reduction in costs for the removal of defects

Description : At a work site, statistical quality control of concrete means (A) Measurement of risks to eliminate failures (B) Applying the theory' of probability to sample testing or inspection (C) Reduction in wastage of inspection costs (D) Reduction in costs for the removal of defects

Last Answer : (B) Applying the theory' of probability to sample testing or inspection

The cost of quality quality is a. An expression of expression of an organizatio organization’s performance in performance in quality in quality in financial terms financial terms b. The difference between customers’ expectations of a product or service and their perceptions of their experience of it. c. A proactive approach proactive approach towards quality towards quality management by management by seeking to seeking to prevent defects prevent defects ever being produced. d. The inspection and inspection and testing of testing of the outputs from outputs from a transformation process.

Description : The cost of quality quality is a. An expression of expression of an organizatio organization's performance in performance in quality in quality in financial terms financial terms b. The ... inspection and inspection and testing of testing of the outputs from outputs from a transformation process.

Last Answer : b. The difference between customers’ expectations of a product or service and their perceptions of their experience of it.

According to ISO 9001, inspection and testing comes under which management responsibility? a) Process control b) Document control c) Control of nonconforming products d) Servicing

Description : According to ISO 9001, inspection and testing comes under which management responsibility? a) Process control b) Document control c) Control of nonconforming products d) Servicing

Last Answer : Ans : a

Which of the following is not an appraisal cost in SQA? a) inter-process inspection b) maintenance c) quality planning d) testing

Description : Which of the following is not an appraisal cost in SQA? a) inter-process inspection b) maintenance c) quality planning d) testing 

Last Answer :  Ans: c

Min. breaking load of 60kg weld during transverse breaking load test is? (i) 110 MT (ii) 115 MT* (iii) 90 MT (iv) 120 MT

Description : Min. breaking load of 60kg weld during transverse breaking load test is? (i) 110 MT (ii) 115 MT* (iii) 90 MT (iv) 120 MT

Last Answer : (ii) 115 MT*

Min. breaking load of 52kg weld during transverse breaking load test is? (i) 90MT* (ii) 100 MT (iii) 110 MT (iv) 120 MT

Description : Min. breaking load of 52kg weld during transverse breaking load test is? (i) 90MT* (ii) 100 MT (iii) 110 MT (iv) 120 MT

Last Answer : (i) 90MT*

Minm. deflection during transverse breaking load test is? (i) 5 mm (ii) 10 mm (iii) 15 mm* (iv) 20 mm

Description : Minm. deflection during transverse breaking load test is? (i) 5 mm (ii) 10 mm (iii) 15 mm* (iv) 20 mm

Last Answer : (iii) 15 mm*

Where Portion sample tests(test piece) should be conducted? (i) At desire by RDSO (ii) At Zonal CMT’s organisation or the Flash Butt Welding plant. * (iii) In RDSO campus (iv) As decided by in charge of the plant

Description : Where Portion sample tests(test piece) should be conducted? (i) At desire by RDSO (ii) At Zonal CMT’s organisation or the Flash Butt Welding plant. * (iii) In RDSO campus (iv) As decided by in charge of the plant

Last Answer : At Zonal CMT’s organisation or the Flash Butt Welding plant.

Soundness test of cement is done to determine its a) Durability in seawater b) Free lime content* c) Iron oxide content d) Alumina content

Description : Soundness test of cement is done to determine its a) Durability in seawater b) Free lime content* c) Iron oxide content d) Alumina content

Last Answer : b) Free lime content*

AA saturated clay is to be tested for shearing strength. Which test should be recommended? a) Direct shear test b) Triaxial shear test c) Vane shear test d) Unconfined compression*

Description : A saturated clay is to be tested for shearing strength. Which test should be recommended? a) Direct shear test b) Triaxial shear test c) Vane shear test d) Unconfined compression*

Last Answer : d) Unconfined compression*