When using a spray can of compressed air/gas to clean your PC is it harmful to your computer when it comes out liquid when spraying?

When using a spray can of compressed air/gas to clean your PC is it harmful to your computer when it comes out liquid when spraying?
by

1 Answer

Answer :

answer:Not really, Just don’t hold the can upside down or sideways if you can help it. There is a chance that it can discolor some plastics but otherwise don’t worry about it. Duster is flammable though. It’s best not to have the computer on when dusting it out. It’s also best to let the computer cool to room temperature first so there is no massive temperature swing that could dislodge surface mount components. Even that is very unlikely. During gaming spec competitions they use liquid nitrogen as a CPU and GPU heatsink.
by

Related questions

Which of the following procedures should be used to maintain a large electric motor during periods of inactivity? A. A thin layer of air-drying varnish should be applied on the windings. B. Compressed air should be blown over areas where dust is deposited. C. Spraying a solvent periodically to remove carbon dust. D. Space heaters should be used to prevent condensation of moisture.

Description : Which of the following procedures should be used to maintain a large electric motor during periods of inactivity? A. A thin layer of air-drying varnish should be applied on the windings. B. ... periodically to remove carbon dust. D. Space heaters should be used to prevent condensation of moisture.

Last Answer : Answer: D

Do you think I could give my jeans that faded look by lightly spraying the pockets and the thighs of my jeans with tan spray paint ?s?

Description : Do you think I could give my jeans that faded look by lightly spraying the pockets and the thighs of my jeans with tan spray paint ?s?

Last Answer : Paint on denim [equal] mess. Diluted bleach (or washing them in a shallow river with a gravel bed many many times) is the only way. Or else buy them faded.

Volume of spray fluid in ultra low vol- ume spraying a).300-500 l/ha b).2-5 l/ha c).25-50 l/ha d).100-150 l/ha

Description : Volume of spray fluid in ultra low vol- ume spraying a).300-500 l/ha b).2-5 l/ha c).25-50 l/ha d).100-150 l/ha

Last Answer : b).2-5 l/ha

The most imprecise way of herbicide application a).Misting b).Aerial spraying c).Foliar spray d).Basal barking

Description : The most imprecise way of herbicide application a).Misting b).Aerial spraying c).Foliar spray d).Basal barking

Last Answer : a).Misting

A farmer, in order to save one spraying operations mix herbicides, insecticide, fungicide etc. at the time of spray, to achieve this feature add a). Compatibility agents b). Spreaders c). Activators d). Adhesive

Description : A farmer, in order to save one spraying operations mix herbicides, insecticide, fungicide etc. at the time of spray, to achieve this feature add a). Compatibility agents b). Spreaders c). Activators d). Adhesive

Last Answer : a). Compatibility agents

Which of the following represents the accepted method of cleaning dust and foreign particles from electrical equipment while limiting damage to electric components? A. Carefully wiping off the components with a soft cotton rag. B. Blowing a high velocity stream of compressed air rapidly across the components. C. Using a vacuum cleaner to remove debris from the components. D. Using carbon tetrachloride as a cleaning solvent to clean the components.

Description : Which of the following represents the accepted method of cleaning dust and foreign particles from electrical equipment while limiting damage to electric components? A. Carefully wiping off the components ... the components. D. Using carbon tetrachloride as a cleaning solvent to clean the components.

Last Answer : Answer: C

With the DPI method of inspection after the contact time has elapsed the dye should be removed by: a) Spraying the surface with the remover till all dye has gone then wipe with clean cloth b) Spraying with the developer then wiping with a cloth c) Wipe clean, using a clean cloth soaked in a solvent remover d) it doesn’t matter how it is done as long as all traces of dye are removed

Description : With the DPI method of inspection after the contact time has elapsed the dye should be removed by: a) Spraying the surface with the remover till all dye has gone then wipe with clean cloth b) Spraying with ... remover d) it doesn't matter how it is done as long as all traces of dye are removed

Last Answer : c) Wipe clean, using a clean cloth soaked in a solvent remover

If a small electric motor has been submerged in saltwater for a short period of time, you should _____________. A. send it ashore for rewinding B. rinse it with warm freshwater and bake it dry in an oven C. soak it in a bucket of commercial solvent and bake with internal heat D. clean it with carbon tetrachloride and blow it out with compressed air

Description : If a small electric motor has been submerged in saltwater for a short period of time, you should _____________. A. send it ashore for rewinding B. rinse it with warm freshwater and bake it dry ... and bake with internal heat D. clean it with carbon tetrachloride and blow it out with compressed air

Last Answer : Answer: B

Compressed air should not be used to clean motor controller equipment because ________________. A. it may force metallic particles into coil insulation B. the surrounding area may need additional cleaning C. the air blast dries out insulation quickly D. a mask and respirator would be required

Description : Compressed air should not be used to clean motor controller equipment because ________________. A. it may force metallic particles into coil insulation B. the surrounding area may need additional cleaning C. the air blast dries out insulation quickly D. a mask and respirator would be required

Last Answer : Answer: A

Is there something besides compressed air to clean my Xbox Console?

Description : Is there something besides compressed air to clean my Xbox Console?

Last Answer : Aside from compressed air, a damp microfiber cloth with just plain tap water or a very mild cleaning solution of vinegar and water or rubbing alcohol and water is all that is recommended when ... and clean internal parts and moisture must be kept away from all metal connectors and power supplies.

Controller contacts should be routinely cleaned by ________. A. blowing with compressed air B. filing with a bastard file C. wiping with a clean dry cloth D. dressing with crocus cloth

Description : Controller contacts should be routinely cleaned by ________. A. blowing with compressed air B. filing with a bastard file C. wiping with a clean dry cloth D. dressing with crocus cloth

Last Answer : Answer: C

Grease coatings on electrical contact surfaces increase contact resistance and should be removed with a/an _______________. A. small wire brush B. compressed air jet C. clean dry cloth D. 10% solution carbon solvent and water

Description : Grease coatings on electrical contact surfaces increase contact resistance and should be removed with a/an _______________. A. small wire brush B. compressed air jet C. clean dry cloth D. 10% solution carbon solvent and water

Last Answer : Answer: C

Which of the listed precautions should be taken when cleaning the internals of a motor with compressed air? A. Open the machine on both ends so as to allow the air and dust to escape. B. Be certain that the circuit breaker is opened and tagged on the feeder panel. C. Be certain that the air is clean and as dry as possible. D. All of the above.

Description : Which of the listed precautions should be taken when cleaning the internals of a motor with compressed air? A. Open the machine on both ends so as to allow the air and dust to escape. B. Be certain that the ... panel. C. Be certain that the air is clean and as dry as possible. D. All of the above.

Last Answer : Answer: D

In a refrigerator what produces the cooling? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Description : In a refrigerator what produces the cooling? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Last Answer : (4) None of these Explanation: Basically, refrigeration system consists of devices that compress and expand refrigerant gas. When refrigerant gas is compressed it expels heat and when it is suddenly ... inside of the fridge is cooled to a temperature below the ambient temperature of the room.

The composition of fresh feed to the high temperature, high pressure urea autoclave is (A) Excess liquid ammonia and liquefied CO2 (B) Excess liquid ammonia and compressed CO2 gas (C) Liquid ammonia and excess compressed CO2 (D) Compressed ammonia gas and excess compressed CO2

Description : The composition of fresh feed to the high temperature, high pressure urea autoclave is (A) Excess liquid ammonia and liquefied CO2 (B) Excess liquid ammonia and compressed CO2 gas (C) Liquid ammonia and excess compressed CO2 (D) Compressed ammonia gas and excess compressed CO2

Last Answer : (B) Excess liquid ammonia and compressed CO2 gas

In a refrigerator what produces the cooling ? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Description : In a refrigerator what produces the cooling ? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Last Answer : None of these

Is the Spray harmful to people or pets?

Description : Is the Spray harmful to people or pets?

Last Answer : The amounts of mosquito control pesticides that are sprayed out of the trucks are not harmful to people or pets. However, as with any pesticides, it is a good idea to keep exposure to a ... should be experienced. People who are sensitive should call the office and notify us prior to any spraying.

I have a liquid amber tree that is approximately 80 ft tall so spraying Foral is not an option.

Description : I have a liquid amber tree that is approximately 80 ft tall so spraying Foral is not an option.

Last Answer : At 80' high agreed spraying would not be an option, however, you can still cure the tree by pouring the mixture into the roots. To start: 30 gallons of water, 2 lbs, powdered milk (expired), 27 1 ... years or so. Results vary, but it usually takes a day per foot of height of the tree being treated

The process of breaking up or liquid into fine droplets by spraying is A. vaporization B. atomization C. condensation D. evaporation

Description : The process of breaking up or liquid into fine droplets by spraying is A. vaporization B. atomization C. condensation D. evaporation

Last Answer : ANSWER : B

The process of breaking up a liquid into fine droplets by spraying is called a. vaporization b. carburetion c. injection d. atomization

Description : The process of breaking up a liquid into fine droplets by spraying is called a. vaporization b. carburetion c. injection d. atomization

Last Answer : ANSWER d. atomization

Which of the listed precautions should be observed before spraying liquid solvent on the insulation of an electric motor? A. Slow the motor down to low speed. B. Disconnect the motor from the power source. C. Secure all ventilation in the area. D. Preheat the insulation to assist in cleaning.

Description : Which of the listed precautions should be observed before spraying liquid solvent on the insulation of an electric motor? A. Slow the motor down to low speed. B. Disconnect the motor from the power source. C. Secure all ventilation in the area. D. Preheat the insulation to assist in cleaning.

Last Answer : Answer: B

Liquid ammonia is not used as such a fertiliser in tropical countries like India, because (A) Its N2 content is very low (B) It is very costly (C) It will evaporate on spraying (D) It is not available

Description : Liquid ammonia is not used as such a fertiliser in tropical countries like India, because (A) Its N2 content is very low (B) It is very costly (C) It will evaporate on spraying (D) It is not available

Last Answer : (C) It will evaporate on spraying

Insulation of liquid surface can be achieved by __________ on top of its surface. (A) Floating hollow polypropylene spheres (B) Spraying alumina powder (C) Putting cement (D) None of these

Description : Insulation of liquid surface can be achieved by __________ on top of its surface. (A) Floating hollow polypropylene spheres (B) Spraying alumina powder (C) Putting cement (D) None of these

Last Answer : (A) Floating hollow polypropylene spheres

In electrostatic spraying the total volume of liquid to be sprayed over one Hectare is a.<1 litres b. 50 litres c. 100 litres d.>100 litres

Description : In electrostatic spraying the total volume of liquid to be sprayed over one Hectare is a.100 litres

Last Answer : a.

The amount of liquid required for spraying of plantation crops is : a.) 200-400L/ha b.) 400-600L/ha c.) 600-800L/ha d.) 1000-1200L/ha

Description : The amount of liquid required for spraying of plantation crops is : a.) 200-400L/ha b.) 400-600L/ha c.) 600-800L/ha d.) 1000-1200L/ha

Last Answer : d.) 1000-1200L/ha

he amount of liquid required for ground spraying of agricultural crops is : a.) 400-600L/ha b.) 200-400L/ha c.) 1000-2000L/ha d.) 600-800L/ha

Description : he amount of liquid required for ground spraying of agricultural crops is : a.) 400-600L/ha b.) 200-400L/ha c.) 1000-2000L/ha d.) 600-800L/ha

Last Answer : a.) 400-600L/ha

The spring is compressed by a distance a and released. The block again comes to rest when the spring is elongated by a distance `b`. During this

Description : The spring is compressed by a distance a and released. The block again comes to rest when the spring is elongated by a distance `b`. During this

Last Answer : The spring is compressed by a distance a and released. The block again comes to rest when the spring is ... coefficient of friction `=(k(a+b))/(2mg)`

For contacting a highly soluble gas with a liquid (A) Bubble the gas through liquid (B) Spray the liquid on gas stream (C) Either (A) or (B) would suffice (D) None of these

Description : For contacting a highly soluble gas with a liquid (A) Bubble the gas through liquid (B) Spray the liquid on gas stream (C) Either (A) or (B) would suffice (D) None of these

Last Answer : (A) Bubble the gas through liquid

. __________ column is preferred to be used, when a high liquid hold up is required in a reactor for gas-liquid reaction. (A) Packed (B) Bubble (C) Spray (D) Tray

Description : . __________ column is preferred to be used, when a high liquid hold up is required in a reactor for gas-liquid reaction. (A) Packed (B) Bubble (C) Spray (D) Tray

Last Answer : (B) Bubble

When a high liquid hold up is required in a reactor for gas liquid reaction, use __________ column. (A) Packed (B) Spray (C) Tray (D) Bubble

Description : When a high liquid hold up is required in a reactor for gas liquid reaction, use __________ column. (A) Packed (B) Spray (C) Tray (D) Bubble

Last Answer : (D) Bubble

Steps taken by the Government of India to control air pollution include (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and hydrocarbons (b) permission to use only pure diesel with a maximum of 500 ppm sulphur as fuel for vehicles (c) use of non-polluting compressed natural gas (CNG) only as fuel by all buses and trucks (d) compulsory mixing of 20% ethyl alcohol with petrol and 20% biodiesel with diesel.

Description : Steps taken by the Government of India to control air pollution include (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and ... trucks (d) compulsory mixing of 20% ethyl alcohol with petrol and 20% biodiesel with diesel.

Last Answer : (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and hydrocarbons

The purpose of an accumulator is to: a. Relieve excess pressure b. Store fluid under pressure c. Store compressed gas for tyre inflation d. Remove air from the system

Description : The purpose of an accumulator is to: a. Relieve excess pressure b. Store fluid under pressure c. Store compressed gas for tyre inflation d. Remove air from the system

Last Answer : b. Store fluid under pressure

The purpose of an accumulator is to: a. Relieve excess pressure b. Store fluid under pressure c. Store compressed gas for tyre inflation d. Remove air from the system

Description : The purpose of an accumulator is to: a. Relieve excess pressure b. Store fluid under pressure c. Store compressed gas for tyre inflation d. Remove air from the system

Last Answer : b. Store fluid under pressure

Purpose of air lift pump is to (A) Compress air (B) Lift compressed air (C) Lift water from a well by using compressed air (D) Lift air under negative pressure

Description : Purpose of air lift pump is to (A) Compress air (B) Lift compressed air (C) Lift water from a well by using compressed air (D) Lift air under negative pressure

Last Answer : (C) Lift water from a well by using compressed air

A liquid compressed in cylinder has a volume of 0.04 m3 at 50 kg/cm² and a volume of 0.039 m3 at 150 kg/cm². The bulk modulus of elasticity of liquid is (A) 400 kg/cm² (B) 4000 kg/cm² (C) (D)

Description : A liquid compressed in cylinder has a volume of 0.04 m3 at 50 kg/cm² and a volume of 0.039 m3 at 150 kg/cm². The bulk modulus of elasticity of liquid is (A) 400 kg/cm² (B) 4000 kg/cm² (C) (D)

Last Answer : Answer: Option B

What refers to a liquid whose temperature is lower than saturation temperature corresponding to the existing pressure?  a. Subcooled liquid  b. Saturated liquid  c. Pure liquid  d. Compressed liquid

Description : What refers to a liquid whose temperature is lower than saturation temperature corresponding to the existing pressure?  a. Subcooled liquid  b. Saturated liquid  c. Pure liquid  d. Compressed liquid

Last Answer : Subcooled liquid

__________________ is a liquid at the saturations which has temperature equal to the boiling point corresponding to the existing pressure.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Description : __________________ is a liquid at the saturations which has temperature equal to the boiling point corresponding to the existing pressure.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Last Answer : Saturated Liquid

_________________ is one which has a pressure higher than the saturation pressure corresponding to the existing temperature.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Description : _________________ is one which has a pressure higher than the saturation pressure corresponding to the existing temperature.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Last Answer : Compressed Liquid

________________ is one which has a temperature lower than the saturation temperature corresponding to the existing pressure.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Description : ________________ is one which has a temperature lower than the saturation temperature corresponding to the existing pressure.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Last Answer : Sub cooled Liquid

______________ is the temperature at which liquids start to boil or the temperature at which vapors begin to condense.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Description : ______________ is the temperature at which liquids start to boil or the temperature at which vapors begin to condense.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Last Answer : Saturation Temperature

A liquid that is about to vaporize is called ______ liquid.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Description : A liquid that is about to vaporize is called ______ liquid.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Last Answer : Saturated

When water exists in the liquid phase and is not about to vaporize, it is considered as _____liquid.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Description : When water exists in the liquid phase and is not about to vaporize, it is considered as _____liquid.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Last Answer : Compressed or subcooled

Air can be cooled and dehumidified by A. circulating chilled water in tube across air flow B. placing evaporator coil across air flow C. spraying chilled water to air D. all of the mentioned

Description : Air can be cooled and dehumidified by A. circulating chilled water in tube across air flow B. placing evaporator coil across air flow C. spraying chilled water to air D. all of the mentioned

Last Answer : ANSWER : D

Spraying of DDT on crops causes pollution of ______. (1) Air & Soil (2) Crops & Air (3) Soil & Water (4) Air & Water

Description : Spraying of DDT on crops causes pollution of ______. (1) Air & Soil (2) Crops & Air (3) Soil & Water (4) Air & Water

Last Answer : (3) Soil & Water Explanation: DDT is a persistent organic pollutant that is readily adsorbed to soils and sediments, which can act both as sinks and as long-term sources of exposure ... the ground water system which contaminates the entire food chain by severely affecting humans dependent on these.

Spraying should be done according to thea) direction of air b) direction of wind c) cropping patter

Description : Spraying should be done according to thea) direction of air b) direction of wind c) cropping patter

Last Answer : b) direction of wind

Foam spraying requires special type of nozzle A. Flat fan nozzle B. Flooding nozzle C. Hollow cone nozzle D. Air aspiring nozzle

Description : Foam spraying requires special type of nozzle A. Flat fan nozzle B. Flooding nozzle C. Hollow cone nozzle D. Air aspiring nozzle

Last Answer : D. Air aspiring nozzle

Spraying of DDT produces pollution of a) Air b) Air and Water c) Air and Soil d) Air, Water and Soil.

Description : Spraying of DDT produces pollution of a) Air b) Air and Water c) Air and Soil d) Air, Water and Soil. 

Last Answer : d) Air, Water and Soil.

Spraying of DDT on crops causes pollution of __________ (1) Air & Soil (2) Crops & Air (3) Soil & Water (4) Air & Water

Description : Spraying of DDT on crops causes pollution of __________ (1) Air & Soil (2) Crops & Air (3) Soil & Water (4) Air & Water

Last Answer : Soil & Water

Cat is peeing spraying on base of gas furnace. How do I stop this?

Description : Cat is peeing spraying on base of gas furnace. How do I stop this?

Last Answer : You could buy a can of Cat Repellent, I recommend Lambert Kay Boundary Indoor/Outdoor Cat Repellent. Just spay it daily around your furnace and hopefully your cat will leave the area alone. It worked great on my cats, but some people have stingy cats.