Name of typical dedicated register is: a. PC b. IR c. SP d. All of these

Name of typical dedicated register is:
a. PC
b. IR
c. SP
d. All of these
by

1 Answer

Answer :

d. All of these
by

Related questions

IR stands for: a. Intel register b. In counter register c. Index register d. Instruction register

Description : IR stands for: a. Intel register b. In counter register c. Index register d. Instruction register

Last Answer : d. Instruction register

How many parts of dedicated register: a. 2 b. 4 c. 5 d. 6

Description : How many parts of dedicated register: a. 2 b. 4 c. 5 d. 6

Last Answer : c. 5

Which register is a temporary storage location: a. general purpose register b. dedicated register c. A and B d. none of these

Description : Which register is a temporary storage location: a. general purpose register b. dedicated register c. A and B d. none of these

Last Answer : c. A and B

There are primarily two types of register: a. general purpose register b. dedicated register c. A and B d. none of these

Description : There are primarily two types of register: a. general purpose register b. dedicated register c. A and B d. none of these

Last Answer : c. A and B

In Microprocessor one of the operands holds a special register called: a. Calculator b. Dedicated c. Accumulator d. None of these

Description : In Microprocessor one of the operands holds a special register called: a. Calculator b. Dedicated c. Accumulator d. None of these

Last Answer : c. Accumulator

In 8051,After reset the SP register is initialized to address________. a. 8H b) 9H c) 7H

Description : In 8051,After reset the SP register is initialized to address________. a. 8H b) 9H c) 7H

Last Answer : c) 7H

After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H

Description : After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H

Last Answer : c) 7H

The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,

Description : The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,

Last Answer : a) 8 byte, on-chip 128 byte RAM.

ROM d) 8 bit, on chip 128 byte RAM. 3. After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H

Description : ROM d) 8 bit, on chip 128 byte RAM. 3. After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H

Last Answer : c) 7H

What is the size of SP register in 8085 microprocessor?

Description :  What is the size of SP register in 8085 microprocessor? A) 16 bits B) 8 bits C) 64 bits D) 48 bits

Last Answer :  What is the size of SP register in 8085 microprocessor? A) 16 bits B) 8 bits C) 64 bits D) 48 bits

The register that includes the address of the memory unit is termed asthe _ a. MAR b PC Cc. IR d. None of these

Description : The register that includes the address of the memory unit is termed asthe _ a. MAR b PC Cc. IR d. None of these

Last Answer : a. MAR

In register transfer the processor register as. a MAR b PC c IR d RI

Description : In register transfer the processor register as. a MAR b PC c IR d RI

Last Answer : d RI

Registers, which are partially visible to users and used to hold conditional, are known as a. PC b. Memory address registers c. General purpose register d. Flags

Description : Registers, which are partially visible to users and used to hold conditional, are known as a. PC b. Memory address registers c. General purpose register d. Flags

Last Answer : c. General purpose register

Which of the following registers is loaded with the contents of the memory location pointed by the PC? a. Memory address register b. Memory data register c. Instruction registers d. Program counter

Description : Which of the following registers is loaded with the contents of the memory location pointed by the PC? a. Memory address register b. Memory data register c. Instruction registers d. Program counter

Last Answer : c. Instruction registers

Which of the following registers is loaded with the contents of the memory location pointed by the PC? a. Memory address registers b. Memory data registers c. Instruction register d. Program counter

Description : Which of the following registers is loaded with the contents of the memory location pointed by the PC? a. Memory address registers b. Memory data registers c. Instruction register d. Program counter

Last Answer : c. Instruction register

_____ is the condition: a. CD b. IR c. Both a and b d. None of these

Description : _____ is the condition: a. CD b. IR c. Both a and b d. None of these

Last Answer : a. CD

What is meant by a dedicated computer? a. which is used by one person only b. which is assigned to one and only one task c. which does one kind of software d. which is meant for application software only

Description : What is meant by a dedicated computer? a. which is used by one person only b. which is assigned to one and only one task c. which does one kind of software d. which is meant for application software only

Last Answer : d. which is meant for application software only

Most of the inexpensive personal computer does not have any disk or diskette drive. What is the name of such computes? a. Home computers b. Diskless computers c. Dedicated computer d. General computer

Description : Most of the inexpensive personal computer does not have any disk or diskette drive. What is the name of such computes? a. Home computers b. Diskless computers c. Dedicated computer d. General computer

Last Answer : a. Home computers

Which of the following is used only for data entry and storage, and never for processing? a. Mouse b. Dumb terminal c. Micro computer d. Dedicated data entry system

Description : Which of the following is used only for data entry and storage, and never for processing? a. Mouse b. Dumb terminal c. Micro computer d. Dedicated data entry system

Last Answer : b. Dumb terminal

What is meant by a dedicated computer? a. Which is used by one person only b. Which is assigned one and only one task c. Which uses one kind of software d. Which is meant for application software

Description : What is meant by a dedicated computer? a. Which is used by one person only b. Which is assigned one and only one task c. Which uses one kind of software d. Which is meant for application software

Last Answer : d. Which is meant for application software

Most of the inexpensive personal computers do not have any disk or diskette drive. What is the name of such computes? a. Home computers b. Diskless computers c. Dedicated computers d. General purpose computers

Description : Most of the inexpensive personal computers do not have any disk or diskette drive. What is the name of such computes? a. Home computers b. Diskless computers c. Dedicated computers d. General purpose computers

Last Answer : a. Home computers

SP stand for: a. Stack pointer b. Stack pop c. Stack push d. None of these

Description : SP stand for: a. Stack pointer b. Stack pop c. Stack push d. None of these

Last Answer : a. Stack pointer

SP stands for: a. Status pointer b. Stack pointer c. a and b d. None of these

Description : SP stands for: a. Status pointer b. Stack pointer c. a and b d. None of these

Last Answer : b. Stack pointer

SP of 8051 is of ___ wide and it is loaded with the default value of ___ after reset. a) 2 byte, 08H b) 8 bit, 07H c) 1 byte, 09H d) 8 bit, 06H

Description : SP of 8051 is of ___ wide and it is loaded with the default value of ___ after reset. a) 2 byte, 08H b) 8 bit, 07H c) 1 byte, 09H d) 8 bit, 06H

Last Answer : d) 8 bit, 06H

Which of the following is of bit operations? i) SP ii) P2 iii) TMOD iv) SBUF v) IP a) ii, v only b) ii, iv, v only c) i, v only d) iii, ii only

Description : Which of the following is of bit operations? i) SP ii) P2 iii) TMOD iv) SBUF v) IP a) ii, v only b) ii, iv, v only c) i, v only d) iii, ii only

Last Answer : c) i, v only

What is the output of the following code PUSH AL a) Decrement SP by 2 & push a word to stack b) Increment SP by 2 & push a word to stack c) Decrement SP by 2 & push a AL to stack d) Illegal

Description : What is the output of the following code PUSH AL a) Decrement SP by 2 & push a word to stack b) Increment SP by 2 & push a word to stack c) Decrement SP by 2 & push a AL to stack d) Illegal

Last Answer : b) Increment SP by 2 & push a word to stack

Which of the following is of bit operations? i) SP ii) P2 iii) TMOD iv) SBUF v) IP a) ii, v only b) ii, iv, v only c) i, v only d) iii, ii only

Description : Which of the following is of bit operations? i) SP ii) P2 iii) TMOD iv) SBUF v) IP a) ii, v only b) ii, iv, v only c) i, v only d) iii, ii only

Last Answer : a) ii, v only

The decoded instruction is stored in ______ (A) Register (B) Memory Address Register(MAR) (C) Instruction Register(IR) (D) None of the Above

Description : The decoded instruction is stored in ______ (A) Register (B) Memory Address Register(MAR) (C) Instruction Register(IR) (D) None of the Above

Last Answer : (C) Instruction Register(IR)

Which registers can interact with secondary memory? (A) Register (B) Memory Address Register(MAR) (C) Instruction Register(IR) (D) None of the Above

Description : Which registers can interact with secondary memory? (A) Register (B) Memory Address Register(MAR) (C) Instruction Register(IR) (D) None of the Above

Last Answer : (B) Memory Address Register(MAR)

Which register holds the item that is to be written into the stack or read out of the stack: a. SR b. IR Cc. RR d DR

Description : Which register holds the item that is to be written into the stack or read out of the stack: a. SR b. IR Cc. RR d DR

Last Answer : d DR

In register stack the top item is read from the stack into: a. SR b. IR Cc. RR d. DR

Description : In register stack the top item is read from the stack into: a. SR b. IR Cc. RR d. DR

Last Answer : d. DR

IR stands for: a) Instruction Register b) Internal Resource c) Information Register d) None of These

Description : IR stands for: a) Instruction Register b) Internal Resource c) Information Register d) None of These

Last Answer : a) Instruction Register

List the allowed register pairs of 8085.

Description : List the allowed register pairs of 8085.

Last Answer : • B-C register pair • D-E register pair • H-L register pair

Which is an integral part of any microcomputer system and its primary purpose is to hold program and data: a. Memory unit b. Register unit c. A and B d. None of these

Description : Which is an integral part of any microcomputer system and its primary purpose is to hold program and data: a. Memory unit b. Register unit c. A and B d. None of these

Last Answer : a. Memory unit

Which is the components of microprocessor: a. Register unit b. Arithmetic and logical unit c. Timing and control unit d. All of these

Description : Which is the components of microprocessor: a. Register unit b. Arithmetic and logical unit c. Timing and control unit d. All of these

Last Answer : d. All of these

In immediate addressing the operand is placed a. in the CPU register b. after OP code in the instruction c. in memory d. in stack

Description : In immediate addressing the operand is placed a. in the CPU register b. after OP code in the instruction c. in memory d. in stack

Last Answer : b. after OP code in the instruction

The most common addressing techiniques employed by a CPU is a. immediate b. direct c. indirect d. register e. all of the above

Description : The most common addressing techiniques employed by a CPU is a. immediate b. direct c. indirect d. register e. all of the above

Last Answer : e. all of the above

A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored

Description : A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored

Last Answer : a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory.

A stack is a. an 8-bit register in the microprocessor b. a 16-bit register in the microprocessor c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Description : A stack is a. an 8-bit register in the microprocessor b. a 16-bit register in the microprocessor c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Last Answer : c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory Address Register b. Memory Data Register c. Instruction Register d. Program Register

Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory Address Register b. Memory Data Register c. Instruction Register d. Program Register

Last Answer : d. Program Register

A structure that stores a number of bits taken "together as a unit" is a a. gate b. mux c. decoder d. register

Description : A structure that stores a number of bits taken "together as a unit" is a a. gate b. mux c. decoder d. register

Last Answer : d. register

In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set

Description : In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set

Last Answer : (A) set, reset

Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter

Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter

Last Answer : d. Program counter

CD-ROM a. Is a `semiconductor memory b. Memory register c. Magnetic memory d. None of the above

Description : CD-ROM a. Is a `semiconductor memory b. Memory register c. Magnetic memory d. None of the above

Last Answer : d. None of the above

Interface electronic circuit is used to interconnect I/O devices to a computer’s CPU or a. ALU b. Memory c. Buffer d. Register

Description : Interface electronic circuit is used to interconnect I/O devices to a computer’s CPU or a. ALU b. Memory c. Buffer d. Register

Last Answer : b. Memory

A type of core store that has a lower access time than the devices used for working store in the same processor is known as a. Core memory b. Buffer c. Fast core d. Address register

Description : A type of core store that has a lower access time than the devices used for working store in the same processor is known as a. Core memory b. Buffer c. Fast core d. Address register

Last Answer : d. Address register

A set of information that defines the status of resources allocated to a process is a. Process control b. ALU c. Register Unit d. Process description

Description : A set of information that defines the status of resources allocated to a process is a. Process control b. ALU c. Register Unit d. Process description

Last Answer : d. Process description

The terminal device that functions as a cash register, computer terminal, and OCR reader is the: a. Data collection terminal b. OCR register terminal c. Video Display terminal d. POS terminal

Description : The terminal device that functions as a cash register, computer terminal, and OCR reader is the: a. Data collection terminal b. OCR register terminal c. Video Display terminal d. POS terminal

Last Answer : d. POS terminal

Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter

Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter

Last Answer : d. Program counter

CD-ROM is a a. Semiconductor memory b. Memory register c. Magnetic memory d. None of above

Description : CD-ROM is a a. Semiconductor memory b. Memory register c. Magnetic memory d. None of above

Last Answer : d. None of above