Which of the following is of bit operations? i) SP ii) P2 iii) TMOD iv) SBUF v) IP a) ii, v only b) ii, iv, v only c) i, v only d) iii, ii only

Which of the following is of bit operations?  
i) SP  
ii) P2  
iii) TMOD  
iv) SBUF
v) IP  
a) ii, v only b) ii, iv, v only c) i, v only d) iii, ii only
by

1 Answer

Answer :

a) ii, v only
by

Related questions

Which of the following is of bit operations? i) SP ii) P2 iii) TMOD iv) SBUF v) IP a) ii, v only b) ii, iv, v only c) i, v only d) iii, ii only

Description : Which of the following is of bit operations? i) SP ii) P2 iii) TMOD iv) SBUF v) IP a) ii, v only b) ii, iv, v only c) i, v only d) iii, ii only

Last Answer : c) i, v only

Which bit of TMOD will exactly configure timer / counter as a timer or counter. i) TMOD.6 of C/T for timer 1 ii) TMOD.6 of C/T for timer 0 iii) TMOD.2 of C/T for timer 0 iv) TMOD.2 of C/T for timer 1 a) i, ii b) ii, iv c) i, iii d) iii, iv

Description : Which bit of TMOD will exactly configure timer / counter as a timer or counter. i) TMOD.6 of C/T for timer 1 ii) TMOD.6 of C/T for timer 0 iii) TMOD.2 of C/T for timer 0 iv) TMOD.2 of C/T for timer 1 a) i, ii b) ii, iv c) i, iii d) iii, iv

Last Answer : a) i, ii

Which of the following instruction is of logical instructions? i) CPL A ii) JC rel iii) DA A iv) ANL A, Rn v) RR A vi) CPL bit a) i, v b) v, iii, I c) iv, ii d) v, iii, ii

Description : Which of the following instruction is of logical instructions? i) CPL A ii) JC rel iii) DA A iv) ANL A, Rn v) RR A vi) CPL bit a) i, v b) v, iii, I c) iv, ii d) v, iii, ii

Last Answer : c) iv, i

What is the Address (SFR) for TCON, SCON, SBUF, PCON and PSW respectively? a) 88H, 98H, 99H, 87H, 0D0H. b) 98H, 99H, 87H, 88H, 0D0H

Description : What is the Address (SFR) for TCON, SCON, SBUF, PCON and PSW respectively? a) 88H, 98H, 99H, 87H, 0D0H. b) 98H, 99H, 87H, 88H, 0D0H

Last Answer : a) 88H, 98H, 99H, 87H, 0D0H

Which of the following is not a program linking directive i) EXTRN ii) SEGMENT iii) NAME iv) PUBLIC v) USING a) iv, v b) ii, iii c) i, iii d) ii, v

Description : Which of the following is not a program linking directive i) EXTRN ii) SEGMENT iii) NAME iv) PUBLIC v) USING a) iv, v b) ii, iii c) i, iii d) ii, v

Last Answer : c) i, iii

SP of 8051 is of ___ wide and it is loaded with the default value of ___ after reset. a) 2 byte, 08H b) 8 bit, 07H c) 1 byte, 09H d) 8 bit, 06H

Description : SP of 8051 is of ___ wide and it is loaded with the default value of ___ after reset. a) 2 byte, 08H b) 8 bit, 07H c) 1 byte, 09H d) 8 bit, 06H

Last Answer : d) 8 bit, 06H

The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,

Description : The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,

Last Answer : a) 8 byte, on-chip 128 byte RAM.

ROM d) 8 bit, on chip 128 byte RAM. 3. After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H

Description : ROM d) 8 bit, on chip 128 byte RAM. 3. After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H

Last Answer : c) 7H

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, ... iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) ... v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : B) i, iii, iv and v only

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii ... and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks ... only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : B) i, iii, iv and v only

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) Address Resolution Protocol (ARP) A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) ... C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

What steps shall be required to rotate an object about the point P1 (as shown in fig.1) and its placement such that what was at P1 is now reduced and is at P2 (as shown in fig.2). Image I. Translate P1 to origin II. Scale as required III. Rotate IV. Translate to the final position P2. (A) I,II and III (B) II,III and IV (C) I,III and IV (D) All of the above

Description : What steps shall be required to rotate an object about the point P1 (as shown in fig.1) and its placement such that what was at P1 is now reduced and is at P2 (as shown in fig.2). I. Translate P1 to origin II. ... (A) I,II and III (B) II,III and IV (C) I,III and IV (D) All of the above

Last Answer : Answer: Marks given to all

8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, register to register c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Description : 8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, register ... c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Last Answer : c) 232 byte, five 8bit, register to register

8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, register to register c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Description : 8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, ... c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Last Answer : d) 232 byte, six 8 bit, register to register

Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Description : Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Last Answer : (i) Gear Tooth : Form milling cutter, Cylindrical type or End mill type, Gear cutter. (ii) Parting off: Slitting Cutter (iii) Keyway : Staggered teeth side milling cutter, End mill cutter, key ... milling cutter. Selection of a cutter depends upon type and size of slot or groove to be produced. 

To put the 8085 microprocessor in the wait state(i) lower the-HOLD input (ii) lower the READY input (iii) raise the HOLD input(iv) raise the READY input

Description : To put the 8085 microprocessor in the wait state(i) lower the-HOLD input (ii) lower the READY input (iii) raise the HOLD input(iv) raise the READY input

Last Answer : (ii) lower the READY input

Which of the following is of type memory initialized Directive? i) DS ii) SET iii) DW iv) DBIT a) i, iii b) ii c) iii d) iv, ii

Description : Which of the following is of type memory initialized Directive? i) DS ii) SET iii) DW iv) DBIT a) i, iii b) ii c) iii d) iv, ii

Last Answer : b) ii

8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Description : 8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Last Answer : c) 4, i,ii,iii

8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Description : 8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Last Answer : c) 4, i,ii,iii

What is the difference between. (i) BIT and BYTE (ii) RAM and ROM (iii) C.U. and A.L.U (iv) Hardware and Software (v) Personal computer and mainframe

Description : What is the difference between. (i) BIT and BYTE (ii) RAM and ROM (iii) C.U. and A.L.U (iv) Hardware and Software (v) Personal computer and mainframe

Last Answer : Personal computer and mainframe: Personal Computer (PC): Short for personal computer or IBM PC. The first personal computer produced by IBM was called the PC, and increasingly the term ... mainframes and minicomputers is vague, depending really on how the manufacturer wants to market its machines.

Identify type of BJT configuration having following features : (i) BJT configuration having the least current gain. (ii) KIT configuration called as voltage follower. (iii) BJT configuration having current gain less than one. (iv) BJT configuration suitable for impedance matching. (v) BIT configuration suitable for voltage amplification. (vi) BJT configuration having the least output impedance.

Description : Identify type of BJT configuration having following features : (i) BJT configuration having the least current gain. (ii) KIT configuration called as voltage follower. (iii) BJT ... configuration suitable for voltage amplification. (vi) BJT configuration having the least output impedance.  

Last Answer : (i) BJT configuration having the least current gain : Common Base Configuration  (ii) KIT configuration called as voltage follower: Common Collector Configuration  (iii) BJT ... Emitter Configuration  (vi) BJT configuration having the least output impedance: Common Collector Configuration

Classify the soil according to IS Classification and explain the meaning of following terms i) GW ii) SP iii) ML iv) SM-ML

Description : Classify the soil according to IS Classification and explain the meaning of following terms i) GW ii) SP iii) ML iv) SM-ML

Last Answer : As per IS classification soil is broadly divided into three divisions: 1. Coarse grained soil: In these soils, more than half the total material by mass is larger than 75 micron IS ... medium compressibility. iv) SM-ML - boundary classification between coarse grained and fine grained soils. 

Proxy application gateway (i) acts on behalf of all intranet users wanting to access interne securely (ii)monitors all accesses to internet and allows access to only specified IP addresses (iii) disallows use of certain protocols with security problems (iv) disallows all internet users from accessing intranet a. i, ii b. i, ii, iii c. i, ii, iii, iv d. ii, iii, iv

Description : Proxy application gateway (i) acts on behalf of all intranet users wanting to access interne securely (ii)monitors all accesses to internet and allows access to only specified IP addresses (iii) disallows use of certain protocols with ... ii b. i, ii, iii c. i, ii, iii, iv d. ii, iii, iv

Last Answer : b. i, ii, iii 

Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Description : Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Last Answer : D) All i, ii, iii and iv

Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Description : Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Last Answer : C) ii, iii and iv only

Arithmetic and Logic Unit I. Perform Arithmetic operations II. Store Data III. Perform comparisons IV. Communicate with input devices Which of the following is true ? (1) I only (2) III only (3) I and II (4) I and III

Description : Arithmetic and Logic Unit I. Perform Arithmetic operations II. Store Data III. Perform comparisons IV. Communicate with input devices Which of the following is true ? (1) I only (2) III only (3) I and II (4) I and III

Last Answer : I and III

In 8051,After reset the SP register is initialized to address________. a. 8H b) 9H c) 7H

Description : In 8051,After reset the SP register is initialized to address________. a. 8H b) 9H c) 7H

Last Answer : c) 7H

SP stand for: a. Stack pointer b. Stack pop c. Stack push d. None of these

Description : SP stand for: a. Stack pointer b. Stack pop c. Stack push d. None of these

Last Answer : a. Stack pointer

SP stands for: a. Status pointer b. Stack pointer c. a and b d. None of these

Description : SP stands for: a. Status pointer b. Stack pointer c. a and b d. None of these

Last Answer : b. Stack pointer

Name of typical dedicated register is: a. PC b. IR c. SP d. All of these

Description : Name of typical dedicated register is: a. PC b. IR c. SP d. All of these

Last Answer : d. All of these

After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H

Description : After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H

Last Answer : c) 7H

What is the output of the following code PUSH AL a) Decrement SP by 2 & push a word to stack b) Increment SP by 2 & push a word to stack c) Decrement SP by 2 & push a AL to stack d) Illegal

Description : What is the output of the following code PUSH AL a) Decrement SP by 2 & push a word to stack b) Increment SP by 2 & push a word to stack c) Decrement SP by 2 & push a AL to stack d) Illegal

Last Answer : b) Increment SP by 2 & push a word to stack

What is the size of SP register in 8085 microprocessor?

Description :  What is the size of SP register in 8085 microprocessor? A) 16 bits B) 8 bits C) 64 bits D) 48 bits

Last Answer :  What is the size of SP register in 8085 microprocessor? A) 16 bits B) 8 bits C) 64 bits D) 48 bits

In 8255, under the I/O mode of operation we have __ modes. Under which mode will have the following features i) A 5 bit control port is available. ii) Three I/O lines are available at Port C. a) 3, Mode2 b) 2, Mode 2 c) 4, Mode 3 d) 3, Mode 2

Description : In 8255, under the I/O mode of operation we have __ modes. Under which mode will have the following features i) A 5 bit control port is available. ii) Three I/O lines are available at Port C. a) 3, Mode2 b) 2, Mode 2 c) 4, Mode 3 d) 3, Mode 2

Last Answer : a) 3, Mode2

A hardened firewall host on an intranet (i) has a proxy application gateway program running on it (ii)Allows specified internet users to access specified services in the intranet (iii) Initiates all internet activities requested by clients and monitors them (iv) prevents outsiders from accessing IP addresses within the intranet a. i, ii b. i, ii, iii c. i, ii, iii, iv d. ii, iii, iv

Description : A hardened firewall host on an intranet (i) has a proxy application gateway program running on it (ii)Allows specified internet users to access specified services in the intranet (iii) Initiates all internet activities requested by clients ... ii b. i, ii, iii c. i, ii, iii, iv d. ii, iii, iv

Last Answer : c. i, ii, iii, iv 

Why 8087 is referred to as Coprocessor? i) Because 8087 is used in parallel with main processor in a system, rather than serving as a main processor itself. ii) Because 8087 is used in serial with main processor in a system, rather than serving as a main processor itself. iii) Because main Microprocessor handles the general program execution and the 8087 handles specialized math computations. a) i & iii b) ii & iii c) iii only. d) i only.

Description : Why 8087 is referred to as Coprocessor? i) Because 8087 is used in parallel with main processor in a system, rather than serving as a main processor itself. ii) Because 8087 is used in serial with main processor in a ... math computations. a) i & iii b) ii & iii c) iii only. d) i only.

Last Answer : c) iii only.

The secondary storage devices can only store data but they cannot perform a. Arithmetic Operation b. Logic operation c. Fetch operations d. Either of the above

Description : The secondary storage devices can only store data but they cannot perform a. Arithmetic Operation b. Logic operation c. Fetch operations d. Either of the above

Last Answer : d. Either of the above

State true or false. i) comparisons precede logical operations in java ii) assignment operations succeed increment operations iii) arithmetic operations succeed comparisons iv) x precede + A) i-true, ii-true, iii-false, iv-true B) i-true, ii-false, iii-true, iv-false C) i-false, ii-true, iii-false, iv-false D) i-true, ii-false, iii-false, iv-true

Description : State true or false. i) comparisons precede logical operations in java ii) assignment operations succeed increment operations iii) arithmetic operations succeed comparisons iv) x precede + A) i-true, ii-true, iii-false, ... false, ii-true, iii-false, iv-false D) i-true, ii-false, iii-false, iv-true

Last Answer : A) i-true, ii-true, iii-false, iv-true

Explain the following unit operations: (i) Mixing (ii) Drying (iii) Evaporation (iv) Absorption.

Description : Explain the following unit operations: (i) Mixing (ii) Drying (iii) Evaporation (iv) Absorption.

Last Answer : i)Mixing: Mixing is carried out for producing simple mixtures, accomplishing dispersions and promoting chemical reactions. It is a process in which two separate materials such as two different ... ammonia mixture by water 2) Removal of hydrogen sulfide from naturally occurring hydrocarbon gases.

Serial port interrupt is generated, if ____ bits are seta) IE b) RI, IE c) IP, TI d) RI, TI

Description : Serial port interrupt is generated, if ____ bits are seta) IE b) RI, IE c) IP, TI d) RI, TI

Last Answer : d) RI, TI

Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Description : Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Last Answer : a) IE

Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Description : Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Last Answer : d) RI, TI

In linear decoding address bus of 16-bit wide can connect only ____ of RAM. a. 16 KB b. 6KB c. 12KB d. 64KB

Description : In linear decoding address bus of 16-bit wide can connect only ____ of RAM. a. 16 KB b. 6KB c. 12KB d. 64KB

Last Answer : b. 6KB

Virtual Mode Flag bit can be set using ____ instruction or any task switch operation only in the _____ mode a) IRET, Virtual b) POPF, Real c) IRET, protected d) POPF, protected

Description : Virtual Mode Flag bit can be set using ____ instruction or any task switch operation only in the _____ mode a) IRET, Virtual b) POPF, Real c) IRET, protected d) POPF, protected

Last Answer : b) POPF, Real

Which of the following statements on DRAM are correct? i) Page mode read operation is faster than RAS read. ii) RAS input remains active during column address strobe. iii) The row and column addresses are strobed into the internal buffers using RAS and CAS inputs respectively. a) i & iii b) i & ii c) all d) iii

Description : Which of the following statements on DRAM are correct? i) Page mode read operation is faster than RAS read. ii) RAS input remains active during column address strobe. iii) The row and column addresses are strobed into the ... RAS and CAS inputs respectively. a) i & iii b) i & ii c) all d) iii

Last Answer : d) iii