Description : 8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH 17. If the __ pin is ___ , then we have the option ... b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal
Last Answer : c) EA, high, external, internal
Description : If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM together with _____ memory and devices. a) EA, high, internal, external b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal
Last Answer : a) EA, high, internal, external
Description : A memory that is capable of determining whether a given datum is contained in one of its address is a. ROM b. PROM c. CAM d. RAM
Last Answer : c. CAM
Description : A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored
Last Answer : a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory.
Description : A physical connection between the microprocessor memory and other parts of the m9crocomputer is known as a. Path b. Address bus c. Route d. All of the above
Last Answer : b. Address bus
Description : In modes 2 and 3, if _____ bit of SCON bit is set will causes enable multiprocessor communication and is of ____ bit address. a) SM1, 9EH b) TB8 , 9CH c) SM2 , 9DH d) SM0, 9FH
Last Answer : c) SM2 , 9DH
Description : In 8051 an external interrupt 1 vector address is of ________ and causes of interrupt if ____. a) 000BH, a high to low transition on pin INT1 b) 001BH, a low to high transition on pin INT1 c) 0013H, a high to low transition on pin INT1 d) 0023H, a low to high transition on pin INT1
Last Answer : a) 000BH, a high to low transition on pin INT1
Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory Address Register b. Memory Data Register c. Instruction Register d. Program Register
Last Answer : d. Program Register
Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter
Last Answer : d. Program counter
Description : Microprocessor 8085 can address location upto a. 32K b. 128K c. 64K d. 1M
Last Answer : c. 64K
Description : 8088 microprocessor differs with 8086 microprocessor in a) Data width on the output b) Address capability c) Support of coprocessor d) Support of MAX / MIN mode
Last Answer : a) Data width on the output
Description : What does microprocessor speed depends on? a) Clock b) Data bus width c) Address bus width
Last Answer : c) Address bus width
Description : Give An Example Of One Address Microprocessor?
Last Answer : Answer :8085 is a one address microprocessor.
Description : In 8086 microprocessor , the address bus is ________ bit wide A. 12 bit B. 10 bit C. 16 bit D. 20 bit
Last Answer : In 8086 microprocessor, the address bus is 20 bit
Description : CD-ROM a. Is a `semiconductor memory b. Memory register c. Magnetic memory d. None of the above
Last Answer : d. None of the above
Description : Which is the type of memory for information that does not change on your computer? a. RAM b. ROM c. ERAM d. RW / RAM
Last Answer : b. ROM
Description : Which of the following is form of semi conductor memory in which it is possible to change the contents of selected memory locations by applying suitable electrical signals? a. CAM b. ROM c. EPROM d. Abacus
Last Answer : c. EPROM
Description : The instructions for starting the computer are house on a. Random access memory b. CD-Rom c. Read only memory chip
Last Answer : c. Read only memory chip
Description : The two kinds of main memory are: a. Primary and secondary b. Random and sequential c. ROM and RAM d. All of above
Last Answer : c. ROM and RAM
Description : CD-ROM is a a. Semiconductor memory b. Memory register c. Magnetic memory d. None of above
Last Answer : d. None of above
Description : CD-ROM stands for a. Compactable Read Only Memory b. Compact Data Read Only Memory c. Compactable Disk Read Only Memory d. Compact Disk Read Only Memory
Last Answer : d. Compact Disk Read Only Memory
Description : What is the main problem of Intel 4004 microprocessor: a. Speed b. Memory size c. World width d. All of these
Last Answer : d. All of these
Description : Which process information at a much faster rate than it can retrieve it from memory: a. ALU b. Processor c. Microprocessor d. CPU
Last Answer : d. CPU
Description : A stack is a. an 8-bit register in the microprocessor b. a 16-bit register in the microprocessor c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer
Last Answer : c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer
Description : A complete microcomputer system consists of a. microprocessor b. memory c. peripheral equipment d. all of above
Last Answer : d. all of above
Description : The first processor to include Virtual memory in the Intel microprocessor familywas: a.)80286 b.)80386c.)80486d.)Pentium
Last Answer : a.)80286
Description : A plastic card similar to a credit card but having some memory and a microprocessor embedded within it is a. Punched paper tape b. Chip card c. Card punch
Last Answer : a. Punched paper tape
Description : The two major types of computer chips are a. External memory chip b. Primary memory chip c. Microprocessor chip d. Both b and c
Last Answer : d. Both b and c
Description : Which microprocessor to read an item from memory: a. VAM b. SAM c. MOC d. None of these
Last Answer : b. SAM
Description : A microprocessor retries instructions from : a. Control memory b. Cache memory c. Main memory d. Virtual memory
Last Answer : c. Main memory
Description : BHE of 8086 microprocessor signal is used to interface the a) Even bank memory b) Odd bank memory c) I/O d) DMA
Last Answer : b) Odd bank memory
Description : The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register
Last Answer : The microprocessor can read/write 16 bit data from or to memory
Description : What is the size of memory which can be accessed by direct accessing in 8085 microprocessor? A) 64 kB B) 4 kB C) 128 kB D) 128 MB
Last Answer : What is the size of memory which can be accessed by direct accessing in 8085 microprocessor? A) 64 kB B) 4 kB C) 128 kB D) 128 MB
Description : Which statement is wrong according to linear decoding : a. Address map is not contiguous. b. Confects occur if two of the select lines become active at the same time c. If all unused address lines are not used as chip selectors then these unused lines become don’t cares d. None of these
Last Answer : d. None of these
Description : In linear decoding address bus of 16-bit wide can connect only ____ of RAM. a. 16 KB b. 6KB c. 12KB d. 64KB
Last Answer : b. 6KB
Description : In 8096, CCB bit 3 is ____. a) write strobe mode select b) address valid strobe select c) bus width select d) Internal read control mode
Last Answer : c) bus width select
Last Answer : b) address valid strobe select
Description : Any method for controlling access to or use of memory is known a. Memory map b. Memory protection c. Memory management d. Memory instruction
Last Answer : b. Memory protection
Description : Pentium Pro can address _____ of memory: a. 4 GB b. 128 GB c. 256 GB d. 512 GB
Last Answer : a. 4 GB
Description : When the RET instruction at the end of subroutine is executed, a. the information where the stack is iniatialized is transferred to the stack pointer b. the memory address of the RET instruction is ... two data bytes stored in the top two locations of the stack are transferred to the stack pointer
Last Answer : c. two data bytes stored in the top two locations of the stack are transferred to the program counter
Description : How many address lines are needed to address each memory locations in a 2048 x 4 memory chip? a. 10 b. 11 c. 8 d. 12
Last Answer : b. 11
Description : If the number of address bits in a memory is reduced by 2 and the addressability is doubled, the size of the memory (i.e., the number of bits stored in the memory) a. doubles b. remains unchanged c. halves d. increases by 2^(address bits)/addressability
Last Answer : c. halves
Description : For a memory with a 16-bit address space, the addressability is a. 16 bits b. 8 bits c. 2^16 bits d. Cannot be determined
Last Answer : d. Cannot be determined
Description : A 32-bit address bus allows access to a memory of capacity(a) 64 Mb (b) 16 Mb (c) 1Gb (d) 4 Gb 2.Which processor structure is pipelined? a) all x80 processors b) all x85 processors c) all x86 processors
Last Answer : c) all x86 processors
Description : Registers, which are partially visible to users and used to hold conditional, are known as a. PC b. Memory address registers c. General purpose register d. Flags
Last Answer : c. General purpose register
Description : How many address lines are needed to address each memory location in a 2048 x 4 memory chip? a. 10 b. 11 c. 8 d. 12
Description : Which of the following registers is loaded with the contents of the memory location pointed by the PC? a. Memory address register b. Memory data register c. Instruction registers d. Program counter
Last Answer : c. Instruction registers
Description : A type of core store that has a lower access time than the devices used for working store in the same processor is known as a. Core memory b. Buffer c. Fast core d. Address register
Last Answer : d. Address register
Description : A storage area used to store data to a compensate for the difference in speed at which the different units can handle data is a. Memory b. Buffer c. Accumulator d. Address
Last Answer : b. Buffer