HVDC transmission is preferred to EHV AC because

HVDC transmission is preferred to EHV AC because 

(a) HVDC terminal equipments are inexpensive 

(b) VAR compensation is not required in HVDC systems 

(c) System stability can be improved 

(d) Harmonic problem is avoided 
by
by
B

2 Answers

Answer :

HVDC transmission is preferred to EHV AC because System stability can be improved 

by

Answer :

C- system stability can be improved
by

Related questions

Bulk power transmission over long HVDC lines is preferred because of

Description : Bulk power transmission over long HVDC lines is preferred because of

Last Answer : Bulk power transmission over long HVDC lines is preferred because of Low cost of HVDC terminal

For enhancing the power transmission in along EHV transmission line, the most preferred method is to

Description : For enhancing the power transmission in along EHV transmission line, the most preferred method is to connect a  (A) Series inductive compensator in the line (B) Shunt inductive compensator at the ... (C) Series capacitive compensator in the line (D) Shunt capacitive compensator at the sending end

Last Answer : For enhancing the power transmission in along EHV transmission line, the most preferred method is to connect a Series capacitive compensator in the line

HVDC transmission line in India:

Description : HVDC transmission line in India: 

Last Answer : HVDC transmission line in India:  S.N .  From To  Voltage 1 Rihand (U.P) (from 1990) Dadri +- 500 KV (bipolar) 2 Talcher- is the biggest ... (Chandrapur) Western Region  140KV   8 Connecting Southern region(Vizag- Gajuwaka) Eastern Region 140KV 

What are the problems associated with EHV transmission?

Description : What are the problems associated with EHV transmission?

Last Answer : Answer: The problems associated with EHV transmission are corona loss and radio interference, requirement of heavy supporting structures and insulation requirments

What for series and shunt compensation provided in EHV transmission lines?

Description : What for series and shunt compensation provided in EHV transmission lines?

Last Answer : Answer: Series capacitance is provided in EHV lines to artificially reduce the series reactance of the line so as to improve stability, voltage regulation and transmission efficiency Shunt compensation ... reduce the line susceptance so as to improve the voltage regulation under light load condition

Choose two appropriate auxiliary components of a HVDC transmission system from the following P. D.C line

Description : Choose two appropriate auxiliary components of a HVDC transmission system from the following P. D.C line inductor Q. A.C line inductor R. Reactive power sources S. Distance relays on D.C line T. Series capacitance on A.C. line  (A) P and Q (B) P and R (C) Q and S (D) S and T

Last Answer : Choose two appropriate auxiliary components of a HVDC transmission system from the following P. D.C line inductor Q. A.C line inductor R. Reactive power sources S. Distance relays on D.C line T. Series capacitance on A.C. line  (A) P and Q (B) P and R (C) Q and S (D) S and T

High Voltage DC (HVDC) transmission is mainly used for

Description : High Voltage DC (HVDC) transmission is mainly used for  (A) bulk power transmission over very long distances (C) inter-connecting two systems with same nominal frequency (C) eliminating reactive power requirement in the operation (D) minimizing harmonics at the converter stations

Last Answer : High Voltage DC (HVDC) transmission is mainly used for bulk power transmission over very long distances 

An HVDC link consist of rectifier, inverter transmission line and other equipments. Which one of the following

Description : An HVDC link consist of rectifier, inverter transmission line and other equipments. Which one of the following is true for this link ?  (A) The transmission line produces/ supplies ... ) Both the converters (rectifier and inverter) consume reactive power from the respective connected AC systems

Last Answer : An HVDC link consist of rectifier, inverter transmission line and other equipments. Which one of the following is true for this link ?  (A) The transmission line produces/ supplies ... ) Both the converters (rectifier and inverter) consume reactive power from the respective connected AC systems

Earth wire on EHV overhead transmission line is provided to protect the line against:

Description : Earth wire on EHV overhead transmission line is provided to protect the line against:

Last Answer : Earth wire on EHV overhead transmission line is provided to protect the line against: lightening surge

Which of the following is TRUE with respect to HVDC transmission line?

Description : Which of the following is TRUE with respect to HVDC transmission line? (A) For a short distance it is economical over HVAC. (B) In HVDC system, harmonics are not generated. (C) Use of HVDC can improve system stability. (D) Less and cheap terminal, equipments are required in HVDC.

Last Answer : Which of the following is TRUE with respect to HVDC transmission line? (A) For a short distance it is economical over HVAC. (B) In HVDC system, harmonics are not generated. (C) Use of HVDC can improve system stability. (D) Less and cheap terminal, equipments are required in HVDC.

Series capacitive compensation in EHV transmission line is used to

Description : Series capacitive compensation in EHV transmission line is used to

Last Answer : To maintain voltage stability 

In voltage source converter based HVDC transmission system the active power is controlled by changing

Description : In voltage source converter based HVDC transmission system the active power is controlled by changing (A) phase angle of the converter ac input voltage (B) supply frequency of the converter ac input voltage (C) magnitude of the converter ac input voltage (D) DC voltage at the inverter terminals

Last Answer : In voltage source converter based HVDC transmission system the active power is controlled by changing phase angle of the converter ac input voltage

Limitation and application of High Voltage DC (HVDC)

Description : Limitation and application of High Voltage DC (HVDC)

Last Answer : Limitation and application of High Voltage DC (HVDC) :  Limitation:- 1) It is difficult to step up and step down DC voltage like AC voltage. 2) Special cooling ... conventional/non-conventional) 12) Increasing existing grid utilization. 13) Interconnection of different grids or networks

In order to switch-off and EHV circuit for maintenance, the following sequence is adopted:

Description : In order to switch-off and EHV circuit for maintenance, the following sequence is adopted: (1) Open the circuit breaker, open the isolator, operate the earth switch (2) Operate the earth switch, ... open the circuit breaker (4) Open the isolator, open the circuit breaker, operate the earth switch 

Last Answer : 1

The insulation strength of EHV lines is mainly governed by

Description : The insulation strength of EHV lines is mainly governed by   (a) Switching overvoltages (b) Lightning overvoltages (c) Power frequency overvoltages (d) Dynamic overvoltages 

Last Answer : 1 P

Why EHV busbars are hallowed and circular?

Description : Why EHV busbars are hallowed and circular?

Last Answer : Answer: To avoid corona effect

A homo-polar HVDC link consists of

Description : A homo-polar HVDC link consists of (A) single-conductor with positive polarity (B) two conductors with one positive and another negative polarity (C ) two conductors having the same polarity with a ground return (D) single conductor with negative polarity and ground as positive polarity 

Last Answer : two or more conductore having same  polarity,usually nagative . and ground return  ex: 1st conductore drain Id1 and 2nd  drain Id2 than the return will be (Id1+Id2)

Shunt compensation in an EHV line is used to

Description : Shunt compensation in an EHV line is used to (A) Improve stability. (B) Improve the voltage profile. (C) Reduce the fault level. (D) Substitute for synchronous phase modifier.

Last Answer : Shunt compensation in an EHV line is used to Improve the voltage profile.

The insulation of modern EHV lines is designed based on?

Description : The insulation of modern EHV lines is designed based on?

Last Answer : The insulation of modern EHV lines is designed based on switching voltage.

What are the advantages of HVDC?

Description : What are the advantages of HVDC?

Last Answer : HVDC have following advantages : 1. Improved stability. 2. Fast control of power flow. 3. Only two conductor is required. 4. If we use ground as return then only ... conductor can be use because skin effect is absent in HVDC . These are some advantages of HVDC.

Short-circuited stubs are preferred to open-circuited stubs because thelatter are a. more difficult to make an connect b. made of a transmission line with a different characteristic impedance c. liable to radiate

Description : Short-circuited stubs are preferred to open-circuited stubs because thelatter are a. more difficult to make an connect b. made of a transmission line with a different characteristic impedance c. liable to radiate

Last Answer : c. liable to radiate

Microwave links are preferred for TV transmission because?

Last Answer : Microwave links are preferred for TV transmission because They produce less phase distortion

Why is AC better for long distance power transmission than DC ?

Description : Why is AC better for long distance power transmission than DC ?

Last Answer : ac is more economical to transmit for long distances . wires can be made smaller by step up transformer .. since major cost are wires to transmit .. then at the end of distance step down transformer is used for commercial use.

Why AC systems are preferred over DC systems?

Description : Why AC systems are preferred over DC systems?

Last Answer : Due to following reasons, AC systems are preferred over DC systems: a. It is easy to maintain and change the voltage of AC electricity for transmission and distribution. b. Plant cost for AC ... the sine wave current will naturally tend to zero at some point making the current easier to interrupt.

For speed control of ac drive, the preferred method using thyristors is

Description : For speed control of ac drive, the preferred method using thyristors is  A) Phase control B) Integral cycle control C) Single pulse PWM control D) Sinusoidal PWM control

Last Answer : For speed control of ac drive, the preferred method using thyristors is Sinusoidal PWM control

relay is preferred for phase fault on short transmission line. (a) Induction type (b) Reactance (c) Impedance (d) None of the above

Description : relay is preferred for phase fault on short transmission line. (a) Induction type (b) Reactance (c) Impedance (d) None of the above

Last Answer : (b) Reactance

In a transmission line if booster transformers are to be used, preferred location will be

Description : In a transmission line if booster transformers are to be used, preferred location will be  (A) At the receiving end (B) At the sending end (C) At the intermediate point (D) Anywhere in the line 

Last Answer : In a transmission line if booster transformers are to be used, preferred location will be At the intermediate point

Which relay is preferred for phase fault on short transmission line?

Last Answer : Reactance relay is preferred for phase fault on short transmission line.

TCXO is preferred over LC oscillator because

Description : TCXO is preferred over LC oscillator because • TCXO is more stable. • TCXO gives more power • TCXO is linear. • None of the above.

Last Answer : TCXO is preferred over LC oscillator because TCXO is more stable.

Varley loop tests are preferred over Murray loop tests because

Description : Varley loop tests are preferred over Murray loop tests because  (1) Valley loop test can locate open circuit fault (2) Varley loop test gives higher accuracy (3) in Varley loop test provision is made for ... of obtaining it from the relation R = pl/a (4) Valley loop test can locate the earth fault

Last Answer : Option 3

Explain the features of flexible AC transmission line (any four). State types of FACTS controller.

Description : Explain the features of flexible AC transmission line (any four). State types of FACTS controller.

Last Answer : Features of flexible AC transmission line:-  1. FACTS increase the reliability of AC grids. 2. It controls the voltage under various load condition 3. It balance reactive power (both ... shunt compensation:- 1. Static synchronous compensator (STATCOM) 2. Static VAR compensator (SVC)

In an AC transmission line difference in phase of voltage at two ends of the line is due to

Description : In an AC transmission line difference in phase of voltage at two ends of the line is due to (a) System voltage (b) Insulators (c) Resistance of line (d) Reactance of line

Last Answer : reactance of line

In order to reduce the harmful effects of harmonics on the AC side of a high voltage DC transmission system...

Description : In order to reduce the harmful effects of harmonics on the AC side of a high voltage DC transmission system_____ are provided. (A) synchronous condensers (B) shunt capacitors (C) shunt filters (D) static compensators

Last Answer : In order to reduce the harmful effects of harmonics on the AC side of a high voltage DC transmission system shunt filters are provided. 

For an existing ac transmission line, the string efficiency is 80%, if dc...

Description : For an existing ac transmission line, the string efficiency is 80%, if dc voltage is supplied for the same setup, the string efficiency will be?

Last Answer : 100%

Ferranti effect in a transmission system is because of

Description : Ferranti effect in a transmission system is because of  (A) Inductive effect of transmission line (B) Capacitive effect of transmission line (C) Corona (D) Resistive effect of transmission line

Last Answer : Ferranti effect in a transmission system is because of Capacitive effect of transmission line

Copper conductors are generally used for transmission lines because it _________.

Last Answer : Copper conductors are generally used for transmission lines because it has longer life and high conductivity.

Solutions are the preferred medium for carrying out reactions because _______.?

Description : Solutions are the preferred medium for carrying out reactions because _______.?

Last Answer : both of these

Solutions are the preferred medium for carrying out reactions because _______.?

Description : Solutions are the preferred medium for carrying out reactions because _______.?

Last Answer : both of these

DNA po lymerase of T. aquat icus is preferred to that of E. coli in PCR because (A) It replicates DNA more efficiently (B) It doesn’t require primers (C) It is not denatured at the melting temperature of DNA (D) It doesn’t cause errors in replication

Description : DNA po lymerase of T. aquat icus is preferred to that of E. coli in PCR because (A) It replicates DNA more efficiently (B) It doesn’t require primers (C) It is not denatured at the melting temperature of DNA (D) It doesn’t cause errors in replication

Last Answer : Answer : C

Which of the following statement(s) is/are true concerning the treatment of MOFS? a. Prevention and therapy of MOFS requires control of the infectious or inflammatory source b. Restoration of normal clinical parameters such as blood pressure, pulse rate, and urine output ensures optimal resuscitation in most patients c. Branch chain amino acids play and important role in the nutritional support of the patient d. Because of the nature of gut injury, total parenteral nutrition is preferred for most patients with MOFS

Description : Which of the following statement(s) is/are true concerning the treatment of MOFS? a. Prevention and therapy of MOFS requires control of the infectious or inflammatory source b. Restoration of normal ... of the nature of gut injury, total parenteral nutrition is preferred for most patients with MOFS

Last Answer : Answer: a, c The therapy of MOFS is directed towards interrupting the involving pathophysiologic process and providing an optimal physiologic environment for healing and recovery. ... Enteral absorption and processing of nutrients appears superior to TPN and lessens overall complications

Glycopyrrolate is the preferred antimuscannic drug for use before and during surgery because (a) It is potent and fast acting (b) It has no central action (c) It has antisecretory and vagolytic actions (d) All of the above

Description : Glycopyrrolate is the preferred antimuscannic drug for use before and during surgery because (a) It is potent and fast acting (b) It has no central action (c) It has antisecretory and vagolytic actions (d) All of the above

Last Answer : Ans: D

Lidocaine is the preferred antiarrhythmic for emergency control of cardiac arrhythmias following acute myocardial infarction because (a) It has a rapidly developing and titratable antiarrhythmic action (b) It casues little myocardial depression and hypotension (c) It has broad spectrum antiarrhythmic efficacy in atrial as well as ventricular arrhythmias (d) Both (a) and (b)

Description : Lidocaine is the preferred antiarrhythmic for emergency control of cardiac arrhythmias following acute myocardial infarction because (a) It has a rapidly developing and titratable antiarrhythmic action (b) It casues ... efficacy in atrial as well as ventricular arrhythmias (d) Both (a) and (b)

Last Answer : Ans: D

For limiting cerebral edema due to brain tumour, the preferred corticosteroids are betamenthasone/dexamethasone because (a) They do not cause Na+ and water retention (b) They are more potent (c) They can be administered intravenously (d) They inhibit brain tumours

Description : For limiting cerebral edema due to brain tumour, the preferred corticosteroids are betamenthasone/dexamethasone because (a) They do not cause Na+ and water retention (b) They are more potent (c) They can be administered intravenously (d) They inhibit brain tumours

Last Answer : Ans: A

Light coloured clothes are preferred in summer because (a) light colours are good radiators of heat (b) light colours are poor absorbers of heat (c) they soak sweat faster (d) they allow body heat to escape faster

Description : Light coloured clothes are preferred in summer because (a) light colours are good radiators of heat (b) light colours are poor absorbers of heat (c) they soak sweat faster (d) they allow body heat to escape faster

Last Answer : Ans:(b)

In cold countries alcohol is preferred to mercury as a thermometric liquid because (a) alcohol is a better conductor of heat (b) alcohol can be coloured and its level seen easily (c) alcohol has a lower freezing point than mercury (d) alcohol is cheaper than mercury

Description : In cold countries alcohol is preferred to mercury as a thermometric liquid because (a) alcohol is a better conductor of heat (b) alcohol can be coloured and its level seen easily (c) alcohol has a lower freezing point than mercury (d) alcohol is cheaper than mercury

Last Answer : Ans:(c)

In a barometer, mercury is preferred over water because (a) mercury is a good conductor of heat (b) mercury is shining and therefore its level can be read easily (c) mercury is available in pure form (d) mercury has high density and low vapour pressure

Description : In a barometer, mercury is preferred over water because (a) mercury is a good conductor of heat (b) mercury is shining and therefore its level can be read easily (c) mercury is available in pure form (d) mercury has high density and low vapour pressure

Last Answer : Ans:(d)

A circular sewer section is preferred to because A. It is cheaper in construction B. It provides maximum area for a given perimeter C. It provides maximum hydraulic mean depth D. All the above

Description : A circular sewer section is preferred to because A. It is cheaper in construction B. It provides maximum area for a given perimeter C. It provides maximum hydraulic mean depth D. All the above

Last Answer : ANS: D

Polypropylene is preferred to polythene, because the former is (A) Non-inflammable (B) Harder (C) Stronger (D) Both (B) & (C)

Description : Polypropylene is preferred to polythene, because the former is (A) Non-inflammable (B) Harder (C) Stronger (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C

Heavy water is preferred over ordinary water as a coolant, because it. (A) Acts both as an efficient coolant as well as a moderator (B) Can be heated to a higher temperature without pressurizing (C) Is less prone to radiation damage (D) All (A), (B) and (C)

Description : Heavy water is preferred over ordinary water as a coolant, because it. (A) Acts both as an efficient coolant as well as a moderator (B) Can be heated to a higher temperature without pressurizing (C) Is less prone to radiation damage (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)