Solutions are the preferred medium for carrying out reactions because _______.?

Solutions are the preferred medium for carrying out reactions because _______.?
by

1 Answer

Answer :

both of these
by
selected by

Related questions

Solutions are the preferred medium for carrying out reactions because _______.?

Description : Solutions are the preferred medium for carrying out reactions because _______.?

Last Answer : both of these

A pre-stressed concrete member is preferred because (A) Its dimensions are not decided from the diagonal tensile stress (B) Large size of long beams carrying large shear force need not be adopted (C) Removal of cracks in the members due to shrinkage (D) All the above

Description : A pre-stressed concrete member is preferred because (A) Its dimensions are not decided from the diagonal tensile stress (B) Large size of long beams carrying large shear force need not be adopted (C) Removal of cracks in the members due to shrinkage (D) All the above

Last Answer : Answer: Option D

For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a single CSTR for high yield (B) Tubular reactor is preferred over a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Description : For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a ... a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Last Answer : (C) Both (A) and (B)

The most unsuitable reactor for carrying out reactions in which high reactant concentration favours high yields is (A) Backmix reactor (B) Plug flow reactor (C) Series of CSTR (D) PFR in series

Description : The most unsuitable reactor for carrying out reactions in which high reactant concentration favours high yields is (A) Backmix reactor (B) Plug flow reactor (C) Series of CSTR (D) PFR in series

Last Answer : A) Backmix reactor

14) Carrying out experiments in a laboratory setting allows for control of independent variables that might influence the outcome of an experiment. A DISADVANTAGE of the laboratory setting is: A)difficulty in observing subjects and measuring their reactions B)failure to duplicate all the conditions that affect choices in the marketplace C)difficulty gaining the interest and attention of subjects D)its high cost in comparison with field experimentation

Description : 14) Carrying out experiments in a laboratory setting allows for control of independent variables that might influence the outcome of an experiment. A DISADVANTAGE of the laboratory setting is: ... the interest and attention of subjects D)its high cost in comparison with field experimentation

Last Answer : B)failure to duplicate all the conditions that affect choices in the marketplace

Ionic reactions occur in (A) Solid state only (B) Liquid state only (C) Solutions (D) Any state

Description : Ionic reactions occur in (A) Solid state only (B) Liquid state only (C) Solutions (D) Any state

Last Answer : (C) Solutions

Very dilute solutions are generally used in fermentation reactions for which the optimum temperature range is __________ °C. (A) -5 to 0 (B) 5 to 10 (C) 30 to 50 (D) 75 to 80

Description : Very dilute solutions are generally used in fermentation reactions for which the optimum temperature range is __________ °C. (A) -5 to 0 (B) 5 to 10 (C) 30 to 50 (D) 75 to 80

Last Answer : (C) 30 to 50

Which of the statements is not true? (1) K2Cr2O7 solution becomes yellow on increasing the pH beyond 7 (2) On passing H2 S through acidified K2Cr2O7 solution, a milky colour is observed (3) Na2Cr2O7 is preferred over K2Cr2O7 in volumetric analysis (4) K2Cr2O7 solution in acidic medium is orange

Description : Which of the statements is not true? (1) K2Cr2O7 solution becomes yellow on increasing the pH beyond 7 (2) On passing H2 S through acidified K2Cr2O7 solution, a milky colour is observed (3) Na2Cr2O7 is preferred over K2Cr2O7 in volumetric analysis (4) K2Cr2O7 solution in acidic medium is orange

Last Answer : Na2Cr2O7 is preferred over K2Cr2O7 in volumetric analysis

If equal volumes of `0.1 M KMnO_(4)` and `0.1 M K_(2)Cr_(2)O_(7)` solutions are allowed to oxidise `Fe^(2+)` to `Fe^(3+)` in acidic medium, then `Fe^(

Description : If equal volumes of `0.1 M KMnO_(4)` and `0.1 M K_(2)Cr_(2)O_(7)` solutions are allowed to oxidise `Fe^(2+)` to `Fe^(3+)` in acidic medium, then `Fe^(

Last Answer : If equal volumes of `0.1 M KMnO_(4)` and `0.1 M K_(2)Cr_(2)O_(7)` solutions are allowed to ... O_(7)` C. equal in both cases D. cannot be determined.

During filtration operation, the filtrate encounters the resistance of the (A) Filter medium (B) Cake (C) Channel carrying the slurry to the upstream side of the cake and filtrate away from the filter medium (D) All (A), (B) and (C)

Description : During filtration operation, the filtrate encounters the resistance of the (A) Filter medium (B) Cake (C) Channel carrying the slurry to the upstream side of the cake and filtrate away from the filter medium (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Using imprints from a plate with complete medium and carrying bacterial colonies, you can select streptomycin resistant mutants and prove that such mutations do not originate as adaptation. These imprints need to be used (a) on plates with and without streptomycin (b) on plates with minimal medium (c) only on plates with streptomycin (d) only on plates without streptomycin.

Description : Using imprints from a plate with complete medium and carrying bacterial colonies, you can select streptomycin resistant mutants and prove that such mutations do not originate as adaptation. These ... minimal medium (c) only on plates with streptomycin (d) only on plates without streptomycin.

Last Answer : (d) only on plates without streptomycin.

Using imprints from a plate with complete medium and carrying bacterial colonies, you can select streptomycin resistant mutants and prove that such mutations do not originate as adaptation. These imprints need to be used (a) on plates with and without streptomycin (b) on plates with minimal medium (c) only on plates with streptomycin (d) only on plates without streptomycin.

Description : Using imprints from a plate with complete medium and carrying bacterial colonies, you can select streptomycin resistant mutants and prove that such mutations do not originate as adaptation. These ... minimal medium (c) only on plates with streptomycin (d) only on plates without streptomycin.

Last Answer : (c) only on plates with streptomycin

The process of forming crystals from their solutions is called _______ . -Science

Description : The process of forming crystals from their solutions is called _______ . -Science

Last Answer : The process is crystallisation.

Choose the option that includes the most appropriate solutions for the blanks. It was the postman himself who _______ the letter to him while the postmaster, experiencing the ________ of a man who has performed a good _______, looked on from his office. (a) gave, nostalgia , reputation (b) gave, satisfaction , job (c) gave, plight, effort (d) took , right , job

Description : Choose the option that includes the most appropriate solutions for the blanks. It was the postman himself who _______ the letter to him while the postmaster, experiencing the ________ of a man who has performed a good ... (b) gave, satisfaction , job (c) gave, plight, effort (d) took , right , job

Last Answer : (b) gave, satisfaction , job

CGTMSE stands for _______ A. Central Government Fund Trust for Medium and Small Enterprises B. Central Government Fund Transfer fund for Medium and Small Enterprises C. Central Government Fund for Medium Size Enterprises D. Credit Guarantee Fund Trust for Micro and Small Enterprises E. None of the Above

Description : CGTMSE stands for _______ A. Central Government Fund Trust for Medium and Small Enterprises B. Central Government Fund Transfer fund for Medium and Small Enterprises C. Central Government Fund for Medium ... D. Credit Guarantee Fund Trust for Micro and Small Enterprises E. None of the Above

Last Answer : D. Credit Guarantee Fund Trust for Micro and Small Enterprises Explanation: Government of India and SIDBI set up the Credit Guarantee Fund Trust for Micro and Small Enterprises (CGTMSE). The main ... so that the borrowers obtain both term loan and working capital facilities from a single agency.

At fruit bud differentiation in mango, C/N ratio is _______: a. Low b. Medium c. High d. Very High

Description : At fruit bud differentiation in mango, C/N ratio is _______: a. Low b. Medium c. High d. Very High

Last Answer : High

_______ is designed to be usedin wirelessapplications in which stations must be ableto sharethe medium without interception by an eavesdropperand without beingsubject tojamming from a malicious intruder. A) Spread spectrum B) Multiplexing C) Modulation D) None of the above

Description : _______ is designed to be usedin wirelessapplications in which stations must be ableto sharethe medium without interception by an eavesdropperand without beingsubject tojamming from a malicious intruder. A) Spread spectrum B) Multiplexing C) Modulation D) None of the above

Last Answer : Spread spectrum

The sharing of a medium and its link by two or more devices is called _______. A) modulation B) encoding C) line discipline D) multiplexing

Description : The sharing of a medium and its link by two or more devices is called _______. A) modulation B) encoding C) line discipline D) multiplexing

Last Answer : multiplexing

The _______ is thephysicalpath over which a message travels. A) Protocol B) Medium C) Signal D) All the above

Description : The _______ is thephysicalpath over which a message travels. A) Protocol B) Medium C) Signal D) All the above

Last Answer : Medium

The physical layer is concerned with the movement of _______ over the physical medium. A. programs B. dialogs C. protocols D. Bits

Description : The physical layer is concerned with the movement of _______ over the physical medium. A. programs B. dialogs C. protocols D. Bits

Last Answer : D. Bits

Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the possibility of tower wall collapse (B) Packed towers are preferred over plate towers for handling corrosive and foamy liquids (C) Diameter of randomly packed tower is normally more than 1.2 metres (D) Due to uneven supply and improper distribution of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Description : Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the ... of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Last Answer : (C) Diameter of randomly packed tower is normally more than 1.2 metres

DNA po lymerase of T. aquat icus is preferred to that of E. coli in PCR because (A) It replicates DNA more efficiently (B) It doesn’t require primers (C) It is not denatured at the melting temperature of DNA (D) It doesn’t cause errors in replication

Description : DNA po lymerase of T. aquat icus is preferred to that of E. coli in PCR because (A) It replicates DNA more efficiently (B) It doesn’t require primers (C) It is not denatured at the melting temperature of DNA (D) It doesn’t cause errors in replication

Last Answer : Answer : C

Which of the following statement(s) is/are true concerning the treatment of MOFS? a. Prevention and therapy of MOFS requires control of the infectious or inflammatory source b. Restoration of normal clinical parameters such as blood pressure, pulse rate, and urine output ensures optimal resuscitation in most patients c. Branch chain amino acids play and important role in the nutritional support of the patient d. Because of the nature of gut injury, total parenteral nutrition is preferred for most patients with MOFS

Description : Which of the following statement(s) is/are true concerning the treatment of MOFS? a. Prevention and therapy of MOFS requires control of the infectious or inflammatory source b. Restoration of normal ... of the nature of gut injury, total parenteral nutrition is preferred for most patients with MOFS

Last Answer : Answer: a, c The therapy of MOFS is directed towards interrupting the involving pathophysiologic process and providing an optimal physiologic environment for healing and recovery. ... Enteral absorption and processing of nutrients appears superior to TPN and lessens overall complications

Glycopyrrolate is the preferred antimuscannic drug for use before and during surgery because (a) It is potent and fast acting (b) It has no central action (c) It has antisecretory and vagolytic actions (d) All of the above

Description : Glycopyrrolate is the preferred antimuscannic drug for use before and during surgery because (a) It is potent and fast acting (b) It has no central action (c) It has antisecretory and vagolytic actions (d) All of the above

Last Answer : Ans: D

Lidocaine is the preferred antiarrhythmic for emergency control of cardiac arrhythmias following acute myocardial infarction because (a) It has a rapidly developing and titratable antiarrhythmic action (b) It casues little myocardial depression and hypotension (c) It has broad spectrum antiarrhythmic efficacy in atrial as well as ventricular arrhythmias (d) Both (a) and (b)

Description : Lidocaine is the preferred antiarrhythmic for emergency control of cardiac arrhythmias following acute myocardial infarction because (a) It has a rapidly developing and titratable antiarrhythmic action (b) It casues ... efficacy in atrial as well as ventricular arrhythmias (d) Both (a) and (b)

Last Answer : Ans: D

For limiting cerebral edema due to brain tumour, the preferred corticosteroids are betamenthasone/dexamethasone because (a) They do not cause Na+ and water retention (b) They are more potent (c) They can be administered intravenously (d) They inhibit brain tumours

Description : For limiting cerebral edema due to brain tumour, the preferred corticosteroids are betamenthasone/dexamethasone because (a) They do not cause Na+ and water retention (b) They are more potent (c) They can be administered intravenously (d) They inhibit brain tumours

Last Answer : Ans: A

Light coloured clothes are preferred in summer because (a) light colours are good radiators of heat (b) light colours are poor absorbers of heat (c) they soak sweat faster (d) they allow body heat to escape faster

Description : Light coloured clothes are preferred in summer because (a) light colours are good radiators of heat (b) light colours are poor absorbers of heat (c) they soak sweat faster (d) they allow body heat to escape faster

Last Answer : Ans:(b)

In cold countries alcohol is preferred to mercury as a thermometric liquid because (a) alcohol is a better conductor of heat (b) alcohol can be coloured and its level seen easily (c) alcohol has a lower freezing point than mercury (d) alcohol is cheaper than mercury

Description : In cold countries alcohol is preferred to mercury as a thermometric liquid because (a) alcohol is a better conductor of heat (b) alcohol can be coloured and its level seen easily (c) alcohol has a lower freezing point than mercury (d) alcohol is cheaper than mercury

Last Answer : Ans:(c)

In a barometer, mercury is preferred over water because (a) mercury is a good conductor of heat (b) mercury is shining and therefore its level can be read easily (c) mercury is available in pure form (d) mercury has high density and low vapour pressure

Description : In a barometer, mercury is preferred over water because (a) mercury is a good conductor of heat (b) mercury is shining and therefore its level can be read easily (c) mercury is available in pure form (d) mercury has high density and low vapour pressure

Last Answer : Ans:(d)

A circular sewer section is preferred to because A. It is cheaper in construction B. It provides maximum area for a given perimeter C. It provides maximum hydraulic mean depth D. All the above

Description : A circular sewer section is preferred to because A. It is cheaper in construction B. It provides maximum area for a given perimeter C. It provides maximum hydraulic mean depth D. All the above

Last Answer : ANS: D

Polypropylene is preferred to polythene, because the former is (A) Non-inflammable (B) Harder (C) Stronger (D) Both (B) & (C)

Description : Polypropylene is preferred to polythene, because the former is (A) Non-inflammable (B) Harder (C) Stronger (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C

Heavy water is preferred over ordinary water as a coolant, because it. (A) Acts both as an efficient coolant as well as a moderator (B) Can be heated to a higher temperature without pressurizing (C) Is less prone to radiation damage (D) All (A), (B) and (C)

Description : Heavy water is preferred over ordinary water as a coolant, because it. (A) Acts both as an efficient coolant as well as a moderator (B) Can be heated to a higher temperature without pressurizing (C) Is less prone to radiation damage (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments (B) Pressure drop in the equipment will be very high (C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Description : Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the ... C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Last Answer : (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments

For gas absorption, low viscosity solvents are preferred, because of their (A) Better flow characteristics (B) Low pumping pressure drop (C) Rapid absorption rates(D) All (A), (B) and (C)

Description : For gas absorption, low viscosity solvents are preferred, because of their (A) Better flow characteristics (B) Low pumping pressure drop (C) Rapid absorption rates (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Consider these two investment strategies: Strategy is the dominant strategy because . A. 1, it is riskless B. 1, it has the highest reward/risk ratio C. 2, its return is at least equal to Strategy 1 and sometimes greater D. 2, it has the highest reward/risk ratio E. both strategies are equally preferred

Description : Consider these two investment strategies: Strategy is the dominant strategy because . A. 1, it is riskless B. 1, it has the highest reward/risk ratio C. 2, its return is at least equal ... sometimes greater D. 2, it has the highest reward/risk ratio E. both strategies are equally preferred

Last Answer : C. 2, its return is at least equal to Strategy 1 and sometimes greater

For large heat transfer area requirement, shell and tube heat exchanger is preferred, because it (A) Occupies smaller space (B) Is more economical (C) Is easy to operate and maintain (D) All (A), (B) and (C)

Description : For large heat transfer area requirement, shell and tube heat exchanger is preferred, because it (A) Occupies smaller space (B) Is more economical (C) Is easy to operate and maintain (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Indirect contact heat exchangers are preferred over direct contact heat exchangers, because (A) Heat transfer co-efficient are high (B) There is no risk of contamination (C) There is no mist formation (D) Cost of equipment is lower

Description : Indirect contact heat exchangers are preferred over direct contact heat exchangers, because (A) Heat transfer co-efficient are high (B) There is no risk of contamination (C) There is no mist formation (D) Cost of equipment is lower

Last Answer : (B) There is no risk of contamination

Sometimes, batch process is preferred over continuous process, when the product (A) Quality & yield cannot be achieved in continuous processes, because of long residence time (B) Sales demand is fluctuating (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Sometimes, batch process is preferred over continuous process, when the product (A) Quality & yield cannot be achieved in continuous processes, because of long residence time (B) Sales demand is fluctuating (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Batch process is preferred over continuous process, when the (A) Product yields and quality cannot be achieved in continuous process, because of long residence time (B) Sales demand of product is not steady (C) Same equipment cannot be used for several processes of the same nature (D) All (A), (B) & (C)

Description : Batch process is preferred over continuous process, when the (A) Product yields and quality cannot be achieved in continuous process, because of long residence time (B) Sales demand of product is not steady (C) Same ... be used for several processes of the same nature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Cast iron pipes are generally preferred to, because (A) Of moderate cost (B) Of ease to join (C) Of longer life (D) All the above

Description : Cast iron pipes are generally preferred to, because (A) Of moderate cost (B) Of ease to join (C) Of longer life (D) All the above

Last Answer : (D) All the above

A circular gravity aqueduct is not generally preferred to because of (A) Its maximum hydraulic mean depth (B) Maximum area per unit of wetted perimeter (C) Minimum cost of construction (D) Its proper support on the ground

Description : A circular gravity aqueduct is not generally preferred to because of (A) Its maximum hydraulic mean depth (B) Maximum area per unit of wetted perimeter (C) Minimum cost of construction (D) Its proper support on the ground

Last Answer : (D) Its proper support on the ground

True meridians are generally preferred to magnetic meridians because (A) These converge to a point (B) These change due to change in time (C) These remain constant (D) None of these

Description : True meridians are generally preferred to magnetic meridians because  (A) These converge to a point  (B) These change due to change in time  (C) These remain constant  (D) None of these 

Last Answer : (C) These remain constant 

Whole circle bearing of a line is preferred to a quadrantal bearing merely because (A) Bearing is not completely specified by an angle (B) Bearing is completely specified by an angle (C) Sign of the correction of magnetic declination is different in different quadrants (D) Its Trigonometrical values may be extracted from ordinary tables easily

Description : Whole circle bearing of a line is preferred to a quadrantal bearing merely because (A) Bearing is not completely specified by an angle (B) Bearing is completely specified by an angle ... different in different quadrants (D) Its Trigonometrical values may be extracted from ordinary tables easily

Last Answer : (B) Bearing is completely specified by an angle

Beams of uniform strength are preferred to those of uniform section because these are economical for (A) Large spans (B) Heavy weights (C) Light weights (D) Short spans

Description : Beams of uniform strength are preferred to those of uniform section because these are economical for (A) Large spans (B) Heavy weights (C) Light weights (D) Short spans

Last Answer : (A) Large spans

Batch process is preferred over continuous process, when the (A) Product yields and quality cannot be achieved in continuous process, because of long residence time (B) Sales demand of product is not steady (C) Same equipment cannot be used for several processes of the same nature (D) All (A), (B) & (C)

Description : Batch process is preferred over continuous process, when the (A) Product yields and quality cannot be achieved in continuous process, because of long residence time (B) Sales demand of product is not steady (C) Same ... cannot be used for several processes of the same nature (D) All (A), (B) & (C)

Last Answer : (B) Sales demand of product is not steady

A triaxial shear test is preferred to direct shear test, because (A) It can be performed under all three drainage conditions with complete control (B) Precise measurement of pore pressure and change in volume during test, is not possible (C) Stress distribution on the failure plane, is non uniform (D) None of these

Description : A triaxial shear test is preferred to direct shear test, because (A) It can be performed under all three drainage conditions with complete control (B) Precise measurement of pore pressure and change in ... possible (C) Stress distribution on the failure plane, is non uniform (D) None of these

Last Answer : Answer: Option A

A control meter is preferred to a weir because (A) It measures the discharge even in silt Leiden streams (B) The velocity of approach of the channel increases above the control, and thus removes the silt completely (C) It is not damaged by floating debris (D) All the above

Description : A control meter is preferred to a weir because (A) It measures the discharge even in silt Leiden streams (B) The velocity of approach of the channel increases above the control, and thus removes the silt completely (C) It is not damaged by floating debris (D) All the above

Last Answer : Answer: Option D

The preferred route of administration of medication in the most acute care situations is which of the following routes? a) Intravenous The IV route is the preferred parenteral route in most acute care situations because it is much more comfortable for the patient, and peak serum levels and pain relief occur more rapidly and reliably. b) Epidural Epidural administration is used to control postoperative and chronic pain. c) Subcutaneous Subcutaneous administration results in slow absorption of medication. d) Intramuscular Intramuscular administration of medication is absorbed more slowly than intravenously administered medication.

Description : The preferred route of administration of medication in the most acute care situations is which of the following routes? a) Intravenous The IV route is the preferred ... ) Intramuscular Intramuscular administration of medication is absorbed more slowly than intravenously administered medication.

Last Answer : a) Intravenous The IV route is the preferred parenteral route in most acute care situations because it is much more comfortable for the patient, and peak serum levels and pain relief occur more rapidly and reliably.

. Lap joints are preferred over butt joints in soldering/brazing, because these joints are (A) Weaker in tension but stronger in shear (B) Weaker in shear but stronger in tension (C) Stronger in both shear and tension (D) The lap joints are easily made

Description : . Lap joints are preferred over butt joints in soldering/brazing, because these joints are (A) Weaker in tension but stronger in shear (B) Weaker in shear but stronger in tension (C) Stronger in both shear and tension (D) The lap joints are easily made

Last Answer : r: Option D