When entering a steep turn, an IVSI is likely to show: a. No change in altitude b. A slight climb c. A slight descent d. A slight descent at high airspeed only

When entering a steep turn, an IVSI is likely to show:
a. No change in altitude
b. A slight climb
c. A slight descent
d. A slight descent at high airspeed only
by

1 Answer

Answer :

b. A slight climb
by

Related questions

When entering a steep turn, an IVSI is likely to show: a. No change in altitude b. A slight climb c. A slight descent d. A slight descent at high airspeed only

Description : When entering a steep turn, an IVSI is likely to show: a. No change in altitude b. A slight climb c. A slight descent d. A slight descent at high airspeed only

Last Answer : b. A slight climb

The transition of altitude to flight level and vice versa is made: a. On the transition level in the climb and transition altitude in the descent b. At the transition altitude in the climb and transition level in the descent c. At the transition level only d. At the transition altitude only

Description : The transition of altitude to flight level and vice versa is made: a. On the transition level in the climb and transition altitude in the descent b. At the transition altitude in the climb and transition level in the descent c. At the transition level only d. At the transition altitude only

Last Answer : b. At the transition altitude in the climb and transition level in the descent

When is spark plug fouling most likely to occur? a. In the climb if you have not adjusted the mixture b. Cruise power c. In the descent if you have not adjusted the mixture d. Max take-off power

Description : When is spark plug fouling most likely to occur? a. In the climb if you have not adjusted the mixture b. Cruise power c. In the descent if you have not adjusted the mixture d. Max take-off power

Last Answer : a. In the climb if you have not adjusted the mixture

At a constant mass and altitude, a lower airspeed requires:

Description : At a constant mass and altitude, a lower airspeed requires:

Last Answer : a higher coefficient of lif

At a constant mass and altitude, a lower airspeed requires: a. More thrust and a lower coefficient of lift b. Less thrust and a lower coefficient of lift c. More thrust and a lower coefficient of drag d. A higher coefficient of lift

Description : At a constant mass and altitude, a lower airspeed requires: a. More thrust and a lower coefficient of lift b. Less thrust and a lower coefficient of lift c. More thrust and a lower coefficient of drag d. A higher coefficient of lift

Last Answer : d. A higher coefficient of lift

If cabin pressure is decreasing, the cabin VSI will indicate: a. Zero b. Climb c. Descent d. Reducing pressure

Description : If cabin pressure is decreasing, the cabin VSI will indicate: a. Zero b. Climb c. Descent d. Reducing pressure

Last Answer : b. Climb

What factors affect descent angle in a glide? a. Configuration and altitude b. Configuration and angle of attack c. Mass and altitude d. Mass and configuration

Description : What factors affect descent angle in a glide? a. Configuration and altitude b. Configuration and angle of attack c. Mass and altitude d. Mass and configuration

Last Answer : b. Configuration and angle of attack

When would the negative differential limits be reached/exceeded? a. Rapid descent when AC descends below cabin altitude b. During ground pressure testing c. Rapid ascent when aircraft climbs d. When changing to manual operation

Description : When would the negative differential limits be reached/exceeded? a. Rapid descent when AC descends below cabin altitude b. During ground pressure testing c. Rapid ascent when aircraft climbs d. When changing to manual operation

Last Answer : a. Rapid descent when AC descends below cabin altitude

The transition of altitude to flight level and vice versa is made: a. On the transition level in the climb and transition altitude in the descent b. At the transition altitude in the climb and transition level in the descent c. At the transition level only d. At the transition altitude only

Description : The transition of altitude to flight level and vice versa is made: a. On the transition level in the climb and transition altitude in the descent b. At the transition altitude in the climb and transition level in the descent c. At the transition level only d. At the transition altitude only

Last Answer : b. At the transition altitude in the climb and transition level in the descent

Which of the following instruments require inputs of both pitot and static pressure? a. Airspeed indicator, machmeter and vertical speed indicator b. Airspeed indicator, vertical speed indicator, altimeter c. Airspeed indicator only d. Airspeed indicator and machmeter

Description : Which of the following instruments require inputs of both pitot and static pressure? a. Airspeed indicator, machmeter and vertical speed indicator b. Airspeed indicator, vertical speed indicator, altimeter c. Airspeed indicator only d. Airspeed indicator and machmeter

Last Answer : d. Airspeed indicator and machmeter

Two aircrafts, one with a sharp wing profile (S) and the other with a thick profile (T), are flying through the same cloud with the same true airspeed. The cloud consists of small supercooled droplets. Which of the following statements is most correct concerning ice accretion? a. Aircraft T experiences more icing than S b. Aircraft S and T experience the same amount of icing c. Neither of the aircrafts accumulate ice due to the small size of droplets d. Aircraft S experiences more icing than T

Description : Two aircrafts, one with a sharp wing profile (S) and the other with a thick profile (T), are flying  through the same cloud with the same true airspeed. The cloud consists of small  ... aircrafts accumulate ice due to the small size of droplets  d. Aircraft S experiences more icing than T

Last Answer : d. Aircraft S experiences more icing than T

The longitudinal separation minimum based on time between aircrafts at the same FL, where there is enough coverage for navigation aids and the preceeding aircraft has a higher true airspeed of 20kts minimum is: a. 3 minutes b. 15 minutes c. 5 minutes d. 10 minutes

Description : The longitudinal separation minimum based on time between aircrafts at the same FL, where there is enough coverage for navigation aids and the preceeding aircraft has a higher true airspeed of 20kts minimum is: a. 3 minutes b. 15 minutes c. 5 minutes d. 10 minutes

Last Answer : c. 5 minutes

A flight is to depart from an airport with runway 09 and 27. Surface wind is 270/05; an inversion is reported at 300 feet with turbulence and wind shear. The wind just above the inversion is 090/30. What is the safest departure procedure? a. Take-off is not possible under these conditions b. Depart on runway 09 with a tailwind c. Depart runway 27 with maximum throttle during the passage through the inversion d. Depart runway 27 with as steep an ascent as possible

Description : A flight is to depart from an airport with runway 09 and 27. Surface wind is 270/05; an  inversion is reported at 300 feet with turbulence and wind shear. The wind just above the  ... throttle during the passage through the inversion  d. Depart runway 27 with as steep an ascent as possible

Last Answer : b. Depart on runway 09 with a tailwind

An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Description : An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Last Answer : a. 500 ft/min

The code “BECMG FM 1100 –RASH” in a METAR means: a. From 1100UTC, the cessation of rain showers b. Becoming from 1100UTC slight rain showers

Description : The code “BECMG FM 1100 –RASH” in a METAR means:  a. From 1100UTC, the cessation of rain showers  b. Becoming from 1100UTC slight rain showers  c. Becoming from 1100UTC rain showers  d. Becoming from 1100UTC till 0000UTC slight rain showers

Last Answer : b. Becoming from 1100UTC slight rain showers

When is spark plug fouling most likely to occur? a. In the climb if you have not adjusted the mixture b. Cruise power c. In the descent if you have not adjusted the mixture d. Max take-off power

Description : When is spark plug fouling most likely to occur? a. In the climb if you have not adjusted the mixture b. Cruise power c. In the descent if you have not adjusted the mixture d. Max take-off power

Last Answer : a. In the climb if you have not adjusted the mixture

Lowering the flaps during a landing approach: a. Increases the angle of descent without increasing the airspeed b. Decreases the angle of descent without increasing power c. Eliminates floating d. Permits approaches at a higher indicated airspeed

Description : Lowering the flaps during a landing approach: a. Increases the angle of descent without increasing the airspeed b. Decreases the angle of descent without increasing power c. Eliminates floating d. Permits approaches at a higher indicated airspeed

Last Answer : a. Increases the angle of descent without increasing the airspeed

From a pre-flight briefing you know a jet stream is at 31,000ft whilst you are at FL270. You experience moderate CAT. What would be the best course of action? a. Stay level b. Descend c. Climb d. Reduce speed

Description : From a pre-flight briefing you know a jet stream is at 31,000ft whilst you are at FL270. You  experience moderate CAT. What would be the best course of action?  a. Stay level  b. Descend  c. Climb  d. Reduce speed

Last Answer : b. Descend 

When does the first segment of the take-off climb begin?

Description : When does the first segment of the take-off climb begin?

Last Answer : When 35 feet is reached

For a turbojet aeroplane the third segment of climb begins when:

Description : For a turbojet aeroplane the third segment of climb begins when:

Last Answer : Acceleration to a flap retraction speed begins (min 400ft)

For a turbojet aeroplane the second segment of the climb begins when:

Description : For a turbojet aeroplane the second segment of the climb begins when:

Last Answer : Landing gear is fully retracted

When does the first segment of the take-off climb begin? a. When V2 is reached b. When 35 feet is reached c. When flaps are up d. When gear and flaps are up

Description : When does the first segment of the take-off climb begin? a. When V2 is reached b. When 35 feet is reached c. When flaps are up d. When gear and flaps are up

Last Answer : c. The estimated off-block time

Maximum endurance: a. Can be achieved in level unaccelerated flight with minimum fuel consumption b. Can be achieved by flying at the best rate of climb speed in straight and level flight c. Can be achieved in a steady climb d. Can be achieved by flying at the absolute ceiling

Description : Maximum endurance: a. Can be achieved in level unaccelerated flight with minimum fuel consumption b. Can be achieved by flying at the best rate of climb speed in straight and level flight c. Can be achieved in a steady climb d. Can be achieved by flying at the absolute ceiling

Last Answer : a. Can be achieved in level unaccelerated flight with minimum fuel consumption

An aircraft climbs from an airfield, elevation 1500ft, QNH 1023mb, to FL75. What height does the aircraft have to climb? (Assume 1mb=30ft) a. 6600 ft b. 7800 ft c. 6300 ft d. 6000 ft

Description : An aircraft climbs from an airfield, elevation 1500ft, QNH 1023mb, to FL75. What height does the aircraft have to climb? (Assume 1mb=30ft) a. 6600 ft b. 7800 ft c. 6300 ft d. 6000 ft

Last Answer : c. 6300 ft

A constant rate of climb in an aeroplane is determined by: a. Wind speed b. The aircraft weight c. Excess engine power d. Excess airspeed

Description : A constant rate of climb in an aeroplane is determined by: a. Wind speed b. The aircraft weight c. Excess engine power d. Excess airspeed

Last Answer : c. Excess engine power

Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)? a. 200 hPa b. 700 hPa c. 500 hPa d. 300 hPa

Description : Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)?  a. 200 hPa  b. 700 hPa  c. 500 hPa  d. 300 hPa

Last Answer : d. 300 hPa

You are cruising at FL 200, OAT is -40°C, sea level pressure is 1033 hPa. Calculate the true altitude. a. 20,660 ft b. 21,740 ft c. 18,260 ft d. 19, 340 ft

Description : You are cruising at FL 200, OAT is -40°C, sea level pressure is 1033 hPa. Calculate the true  altitude.  a. 20,660 ft  b. 21,740 ft  c. 18,260 ft  d. 19, 340 ft

Last Answer : d. 19, 340 ft

How does a pilot react to heavy freezing rain at 2,000ft/AGL, when he is unable to deice nor land? a. He ascends to the cold air layer above b. He continues to fly at the same altitude c. He turns back before the aircraft loses maneuverability d. He descends to the warm air layer below

Description : How does a pilot react to heavy freezing rain at 2,000ft/AGL, when he is unable to deice nor  land?  a. He ascends to the cold air layer above  b. He continues to fly at the same altitude  c. He turns back before the aircraft loses maneuverability  d. He descends to the warm air layer below

Last Answer : c. He turns back before the aircraft loses maneuverability 

The isobars drawn on a surface weather chart represent lines of equal pressure: a. At flight level b. At height of observatory c. At a determined density altitude d. Reduced to sea level

Description : The isobars drawn on a surface weather chart represent lines of equal pressure:  a. At flight level  b. At height of observatory  c. At a determined density altitude  d. Reduced to sea level

Last Answer : d. Reduced to sea level

Generally, as altitude increases: a. Temperature decreases and density increases b. Temperature, pressure and density decreases c. Temperature and pressure increase and density decreases d. Temperature decreases and pressure and density increase

Description : Generally, as altitude increases: a. Temperature decreases and density increases b. Temperature, pressure and density decreases c. Temperature and pressure increase and density decreases d. Temperature decreases and pressure and density increase

Last Answer : b. Temperature, pressure and density decreases

The time of useful consciousness for an individual experiencing rapid decompression at an altitude of 25,000 ft is

Description : The time of useful consciousness for an individual experiencing rapid decompression at an altitude of 25,000 ft is

Last Answer : 2 minutes

If the symptoms of hyperventilation occur at an altitude where hypoxia is not a consideration, what is the correct remedial action

Description : If the symptoms of hyperventilation occur at an altitude where hypoxia is not a consideration, what is the correct remedial action

Last Answer : decrease rate and depth of breathing

What four factors affect night vision? a. Age, alcohol, altitude and smoking b. Age, altitude, instrument lights and smoking c. Instrument lights, altitude, alcohol and smoking d. Age, alcohol, altitude and instrument lights

Description : What four factors affect night vision? a. Age, alcohol, altitude and smoking b. Age, altitude, instrument lights and smoking c. Instrument lights, altitude, alcohol and smoking d. Age, alcohol, altitude and instrument lights

Last Answer : a. Age, alcohol, altitude and smoking

A pilot suffering from decompression sickness should: a. Descend to a lower level where the symptoms will disappear and continue the flight at this or a lower level b. Decrease the cabin pressure to relieve the symptoms c. Continue the flight at a lower altitude and carry out exercises to relieve the pain in the affected site d. Land as soon as possible and seek medical assistance

Description : A pilot suffering from decompression sickness should: a. Descend to a lower level where the symptoms will disappear and continue the flight at this or a lower level b. Decrease the cabin pressure ... relieve the pain in the affected site d. Land as soon as possible and seek medical assistance

Last Answer : d. Land as soon as possible and seek medical assistance

The effects of carbon monoxide: a. Increases with altitude b. Decreases with altitude c. Increases with increase of density d. Decreases with pressure loss

Description : The effects of carbon monoxide: a. Increases with altitude b. Decreases with altitude c. Increases with increase of density d. Decreases with pressure loss

Last Answer : a. Increases with altitude

Refer to CAP697 MRJT1 Fig. 4.2 & 4.5.3.2 Estimated take-off mass 57,000kg; ground distance 150nm; temperature ISA -10C; cruise at M0.74. What is the optimum cruise altitude and TAS? a. 25,000ft & 445kt b. 33,000ft & 420kt c. 25,000ft & 435kt d. 33,000ft & 430kt

Description : Refer to CAP697 MRJT1 Fig. 4.2 & 4.5.3.2 Estimated take-off mass 57,000kg; ground distance 150nm; temperature ISA -10C; cruise at M0.74. What is the optimum cruise altitude and TAS? a. 25,000ft & 445kt b. 33,000ft & 420kt c. 25,000ft & 435kt d. 33,000ft & 430kt

Last Answer : c. 25,000ft & 435kt

For take-off performance calculations, what is taken into account? a. OAT, pressure altitude, wind, weight b. Standard temperature, altitude, wind, weight c. Standard altitude, standard temperature, wind, weight d. Standard temperature, pressure altitude, wind, weight

Description : For take-off performance calculations, what is taken into account? a. OAT, pressure altitude, wind, weight b. Standard temperature, altitude, wind, weight c. Standard altitude, standard temperature, wind, weight d. Standard temperature, pressure altitude, wind, weight

Last Answer : a. OAT, pressure altitude, wind, weight

An altitude of 13,500 feet would be spoken as:

Description : An altitude of 13,500 feet would be spoken as:

Last Answer : ONE THREE THOUSAND FIVE HUNDRED FEET

What action should be taken when, during an IFR flight in VMC, you suffer a radio failure? a. Return to the aerodrome from which you departed b. Continue flying in VMC and land as soon as possible c. Maintain your assigned altitude and land at the nearest aerodrome at which there are VMC conditions d. Continue flying at your assigned altitude and start your approach at your ETA

Description : What action should be taken when, during an IFR flight in VMC, you suffer a radio failure? a. Return to the aerodrome from which you departed b. Continue flying in VMC and land as soon ... there are VMC conditions d. Continue flying at your assigned altitude and start your approach at your ETA

Last Answer : b. Continue flying in VMC and land as soon as possible

The excess cabin altitude alerting system must operate to warn the crew at: a. 8,000ft b. 10,000ft c. 13,000ft d. 14,000ft

Description : The excess cabin altitude alerting system must operate to warn the crew at: a. 8,000ft b. 10,000ft c. 13,000ft d. 14,000ft

Last Answer : b. 10,000ft

An aircraft is flying at constant indicated altitude over a warm airmass. The altimeter reading will be: a. Correct b. Greater than the real altitude c. Less than the real altitude d. Oscillating around the correct altitude

Description : An aircraft is flying at constant indicated altitude over a warm airmass. The altimeter reading will be: a. Correct b. Greater than the real altitude c. Less than the real altitude d. Oscillating around the correct altitude

Last Answer : c. Less than the real altitude

Cabin altitude in pressured flight is: a. The altitude corresponding to cabin pressure regardless of aircraft height b. Is presented on a second needle on the aircraft altimeter c. Altitude at which cabin pressure equals ambient pressure d. Altitude corresponding to cabin pressure in relation to MSL ISA conditions

Description : Cabin altitude in pressured flight is: a. The altitude corresponding to cabin pressure regardless of aircraft height b. Is presented on a second needle on the aircraft altimeter c. ... pressure equals ambient pressure d. Altitude corresponding to cabin pressure in relation to MSL ISA conditions

Last Answer : a. The altitude corresponding to cabin pressure regardless of aircraft height

What true airspeed and angle of attack should be used to generate the same amount of lift as altitude is increased? a. A higher true airspeed for any given angle of attack b. The same true airspeed and angle of attack c. A lower true airspeed and higher angle of attack d. A constant angle of attack and true airspeed

Description : What true airspeed and angle of attack should be used to generate the same amount of lift as altitude is increased? a. A higher true airspeed for any given angle of attack b. The same true ... c. A lower true airspeed and higher angle of attack d. A constant angle of attack and true airspeed

Last Answer : a. A higher true airspeed for any given angle of attack

What is the recommended technique to counter the loss of airspeed and resultant lift from wind shear? a. Maintain, or increase, pitch attitude and accept the lower-than-normal airspeed indications b. Lower the pitch attitude and regain lost airspeed c. Avoid overstressing aircraft, pitch to stick shaker, and apply maximum power d. Accelerate the aircraft to prevent a stall by sacrificing altitude

Description : What is the recommended technique to counter the loss of airspeed and resultant lift from wind shear? a. Maintain, or increase, pitch attitude and accept the lower-than-normal airspeed ... shaker, and apply maximum power d. Accelerate the aircraft to prevent a stall by sacrificing altitude

Last Answer : c. Avoid overstressing aircraft, pitch to stick shaker, and apply maximum power

Shortly after take-off, the altitude of the aeroplane suffers an abrupt pitch-up and IAS rapidly decreases followed quickly by a decrease in altitude. Engine indications are normal. You should suspect what and what should you do? a. Marked temperature drop; apply full power b. Loss of head wind or an increase in tail wind; apply full power c. Incipient engine failure (ignore instruments); lower the nose to gain airspeed d. Local clear air turbulence; reduce speed to VRA and ride it out

Description : Shortly after take-off, the altitude of the aeroplane suffers an abrupt pitch-up and IAS rapidly decreases followed quickly by a decrease in altitude. Engine indications are normal. You should suspect what ... to gain airspeed d. Local clear air turbulence; reduce speed to VRA and ride it out

Last Answer : b. Loss of head wind or an increase in tail wind; apply full power

At a constant mass and altitude, a lower airspeed requires: a. More thrust and a lower coefficient of lift b. Less thrust and a lower coefficient of lift c. More thrust and a lower coefficient of drag d. A higher coefficient of lift

Description : At a constant mass and altitude, a lower airspeed requires: a. More thrust and a lower coefficient of lift b. Less thrust and a lower coefficient of lift c. More thrust and a lower coefficient of drag d. A higher coefficient of lift

Last Answer : d. A higher coefficient of lift

Can camels climb steep slopes or mountains?

Description : Can camels climb steep slopes or mountains?

Last Answer : A: Camels are not well-suited for climbing steep slopes or mountains. Their anatomy and body structure are more adapted for walking on flat terrains and sandy deserts rather than navigating rugged, mountainous terrains.

If cabin pressure is decreasing, the cabin VSI will indicate: a. Zero b. Climb c. Descent d. Reducing pressure

Description : If cabin pressure is decreasing, the cabin VSI will indicate: a. Zero b. Climb c. Descent d. Reducing pressure

Last Answer : b. Climb

When using a megohmmeter to test insulation, good insulation will be indicated by _____________. A. slight kicks of the needle down scale B. a downward dip followed by a gradual climb to the true resistance value C. a gradual rise in the pointer reading at the outset D. the initial dip of the pointer

Description : When using a megohmmeter to test insulation, good insulation will be indicated by _____________. A. slight kicks of the needle down scale B. a downward dip followed by a gradual climb to the true resistance ... C. a gradual rise in the pointer reading at the outset D. the initial dip of the pointer

Last Answer : Answer: B

Disorientation is more likely when the pilot is: 1. flying in VMC 2. frequently changing between inside and outside references 3. flying from IMC to VMC 4. approaching over still water at night a. 1, 2 & 3 only are correct b. 1, 2 & 4 only are correct c. 1, 2, 3 & 4 are correct d. 1 only is correct

Description : Disorientation is more likely when the pilot is: 1. flying in VMC 2. frequently changing between inside and outside references 3. flying from IMC to VMC 4. approaching over still water at night a. 1, 2 & 3 only ... 1, 2 & 4 only are correct c. 1, 2, 3 & 4 are correct d. 1 only is correct

Last Answer : b. 1, 2 & 4 only are correct