A filter press is (A) A batch filter (B) Not suitable, if the liquid is the main product (C) Having prohibitively high maintenance cost (D) Not suitable for wide range of materials under varying operating conditions of cake thickness and pressure

A filter press is
(A) A batch filter
(B) Not suitable, if the liquid is the main product
(C) Having prohibitively high maintenance cost
(D) Not suitable for wide range of materials under varying operating
conditions of cake thickness and pressure
by

1 Answer

Answer :

(A) A batch filter
by

Related questions

Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid?(A) Sand bed filter(B) Plate and frame filter press(C) Vacuum filter(D) Batch basket centrifuge

Description : Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid? (A) Sand bed filter (B) Plate and frame filter press (C) Vacuum filter (D) Batch basket centrifuge

Last Answer : (C) Vacuum filter

The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot be recovered by distillation (C) Its recovery cost by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Description : The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot ... by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Last Answer : (C) Its recovery cost by distillation may be prohibitively high

A centrifugal filtration unit operating at a rotational speed of w has inner surface of the liquid (density ρL) located at a radial distance R from the axis of rotation. The thickness of the liquid film is δ and no cake is formed. The initial pressure drop during filtration is (A) ½w 2 . R 2 . ρL (B) ½w 2 . δ 2 . ρL (C) ½w 2 . δρL (2R + δ) (D) ½w 2 . R . ρL(R + 2δ)

Description : A centrifugal filtration unit operating at a rotational speed of w has inner surface of the liquid (density ρL) located at a radial distance R from the axis of rotation. The thickness of the liquid film is δ and no cake is formed. The ... . ρL (C) ½w 2 . δρL (2R + δ) (D) ½w 2 . R . ρL(R + 2δ)

Last Answer : (C) ½w 2 . δρL (2R + δ)

n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 kgs of material is dried. a. The quantity of moisture removed per batch. b. What is the total quantity ( sensible & latent) of heat required to evaporate the moisture, if the latent heat of water is 540 kcal/kg at atmospheric conditions, Ignore heat absorbed by the solids c. Find the quantity of steam required for the drying process (per batch), if steam at 4 kg/cm2 is used for generating hot air in the dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture  is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In  each batch about 120 ... dryer and the dryer efficiency  is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Last Answer : Given that   Qty of material dried per batch - 120 Kgs  Moisture at inlet - 60% a. The quantity of moisture removed per batch.  Water quantity in a wet batch - 120 x 0.6 = 72 Kgs.  Quantity of bone dry ... - 48/0.95 = 50.5 Kgs.  Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.

Filtration should be stopped in a filter press, if the (A) Cake becomes very dense (B) Liquor stops flowing out to the discharge (C) Filtration pressure rises suddenly (D) Both (B) & (C

Description : Filtration should be stopped in a filter press, if the (A) Cake becomes very dense (B) Liquor stops flowing out to the discharge (C) Filtration pressure rises suddenly (D) Both (B) & (C

Last Answer : (D) Both (B) & (C

Which of the following is a vacuum filter? (A) Filter press (B) Rotary disc filter (C) Batch basket centrifuge (D) Tank filter (Nutsche filter)

Description : Which of the following is a vacuum filter? (A) Filter press (B) Rotary disc filter (C) Batch basket centrifuge (D) Tank filter (Nutsche filter)

Last Answer : (B) Rotary disc filter

Vacuum filter is most suitable for the (A) Removal of fines from liquid (B) Liquids having high vapour pressure (C) Liquids of very high viscosity (D) None of these

Description : Vacuum filter is most suitable for the (A) Removal of fines from liquid (B) Liquids having high vapour pressure (C) Liquids of very high viscosity (D) None of these

Last Answer : (D) None of these

A compressible cake has the (A) Maximum porosity at the upstream side (B) Maximum porosity at the filter medium (C) Same porosity throughout the cake thickness (D) None of these

Description : A compressible cake has the (A) Maximum porosity at the upstream side (B) Maximum porosity at the filter medium (C) Same porosity throughout the cake thickness (D) None of these

Last Answer : (A) Maximum porosity at the upstream side

The porosity of a compressible cake is(A) Minimum at the filter medium(B) Minimum at the upstream face(C) Maximum at the filter medium(D) Same throughout the thickness of cake

Description : The porosity of a compressible cake is (A) Minimum at the filter medium (B) Minimum at the upstream face (C) Maximum at the filter medium (D) Same throughout the thickness of cake

Last Answer : (A) Minimum at the filter medium

Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

In case of a plate and frame filter press, filtrate flow through the cake follows __________ flow. (A) Plug (B) Turbulent (C) Laminar (D) None of these

Description : In case of a plate and frame filter press, filtrate flow through the cake follows __________ flow. (A) Plug (B) Turbulent (C) Laminar (D) None of these

Last Answer : (C) Laminar

Flow of filtrate through the cake in a plate and frame filter press is best described by the __________ equation. (A) Kozeny-Carman (B) Hagen-Poiseuille’s (C) Fanning's (D) Kremser

Description : Flow of filtrate through the cake in a plate and frame filter press is best described by the __________ equation. (A) Kozeny-Carman (B) Hagen-Poiseuille’s (C) Fanning's (D) Kremser

Last Answer : (A) Kozeny-Carman

Which of the following fixes the volume of a batch reactor for a particular conversion and production rate? (A) Operating conditions (e.g. pressure and temperature) (B) Rate constant (C) Density of mixture (D) None of these

Description : Which of the following fixes the volume of a batch reactor for a particular conversion and production rate? (A) Operating conditions (e.g. pressure and temperature) (B) Rate constant (C) Density of mixture (D) None of these

Last Answer : (C) Density of mixture

Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck

Description : Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck

Last Answer : (B) Belt conveyor

Batch tray dryers suffers from the disadvantage of (A) High maintenance cost (B) Non-uniform & low production rate (C) High labour cost & low heat economy (D) All 'a', 'b' & 'c'

Description : Batch tray dryers suffers from the disadvantage of (A) High maintenance cost (B) Non-uniform & low production rate (C) High labour cost & low heat economy (D) All 'a', 'b' & 'c'

Last Answer : (C) High labour cost & low heat economy

Dynamic vibration absorber is suitable for A varying speed machines B constant speed machines C Zero speed range machines D None of the mentioned

Description : Dynamic vibration absorber is suitable for A varying speed machines B constant speed machines C Zero speed range machines D None of the mentioned

Last Answer : B constant speed machines

Dynamic vibration absorber is suitable for A. Constant speed machines B. Varying speed machines C. Zero speed range machines D. None of the above

Description : Dynamic vibration absorber is suitable for A. Constant speed machines B. Varying speed machines C. Zero speed range machines D. None of the above

Last Answer : A. Constant speed machines

For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a single CSTR for high yield (B) Tubular reactor is preferred over a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Description : For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a ... a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Last Answer : (C) Both (A) and (B)

Higher viscosity index of a lubricating oil denotes (A) Less changes in fluidity of oil with temperature (B) Substantially high change in fluidity of oil with temperature (C) Its unsuitability under varying temperature conditions (D) None of these

Description : Higher viscosity index of a lubricating oil denotes (A) Less changes in fluidity of oil with temperature (B) Substantially high change in fluidity of oil with temperature (C) Its unsuitability under varying temperature conditions (D) None of these

Last Answer : (A) Less changes in fluidity of oil with temperature

Where the density difference of the two liquid phase to be separated is very small (as in milk cream separator), the most suitable separator is a (A) Disc bowl centrifuge (B) Sharpies super-centrifuge (C) Batch basket centrifuge

Description : Where the density difference of the two liquid phase to be separated is very small (as in milk cream separator), the most suitable separator is a (A) Disc bowl centrifuge (B) Sharpies super-centrifuge (C) Batch basket centrifuge

Last Answer : (A) Disc bowl centrifuge

For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Description : For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Last Answer : (A) Stirred tank

A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions(D) Obtaining uniform polymerisation products in highly exothermicreactions

Description : A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions (D) Obtaining uniform polymerisation products in highly exothermic reactions

Last Answer : (C) Liquid phase reactions

A batch reactor is (A) Suitable for gas-phase reactions on commercial scale (B) Suitable for liquid phase reactions involving small production rate (C) Least expensive to operate for a given rate (D) Most suitable for very large production rate

Description : A batch reactor is (A) Suitable for gas-phase reactions on commercial scale (B) Suitable for liquid phase reactions involving small production rate (C) Least expensive to operate for a given rate (D) Most suitable for very large production rate

Last Answer : (B) Suitable for liquid phase reactions involving small production rate

Which of the following is the most suitable for very high pressure gas phase reaction? (A) Batch reactor (B) Tubular flow reactor (C) Stirred tank reactor (D) Fluidised bed reactor

Description : Which of the following is the most suitable for very high pressure gas phase reaction? (A) Batch reactor (B) Tubular flow reactor (C) Stirred tank reactor (D) Fluidised bed reactor

Last Answer : (B) Tubular flow reactor

When a liquid moves through a pipe having a varying diameter, the pressure against the inside walls of the pipe will be: w) the same throughout x) lowest where the diameter is smallest y) lowest where the diameter is largest z) lowest where the velocity of flow is lowest

Description : When a liquid moves through a pipe having a varying diameter, the pressure against the inside walls of the pipe will be: w) the same throughout x) lowest where the diameter is smallest y) lowest where the diameter is largest z) lowest where the velocity of flow is lowest 

Last Answer : ANSWER: X -- LOWEST WHERE THE DIAMETER IS SMALLEST

Commercial power generation from fusion reactor is not yet possible, because (A) It is difficult to control nuclear fusion reaction (B) The fuel required (i.e., deuterium & tritium) is scarce (C) It is difficult to initiate fusion reaction (D) Quantity of fuel required for initiating fusion reaction is prohibitively high

Description : Commercial power generation from fusion reactor is not yet possible, because (A) It is difficult to control nuclear fusion reaction (B) The fuel required (i.e., deuterium & tritium) is ... to initiate fusion reaction (D) Quantity of fuel required for initiating fusion reaction is prohibitively high

Last Answer : (A) It is difficult to control nuclear fusion reaction

Commercial power generation from fusion reactor is not yet possible, because (A) It is difficult to control fusion reaction (B) The fuel required (e.g. deuterium and tritium) is scarce (C) It is difficult to initiate fusion reaction (D) Quantity of fuel required for initiating fusion reaction is prohibitively high

Description : Commercial power generation from fusion reactor is not yet possible, because (A) It is difficult to control fusion reaction (B) The fuel required (e.g. deuterium and tritium) is scarce ... to initiate fusion reaction (D) Quantity of fuel required for initiating fusion reaction is prohibitively high

Last Answer : (A) It is difficult to control fusion reaction

Can a cooling tower cool water below the wet bulb temperature of inlet air? (A) Yes (B) No (C) Yes; but height of cooling tower will be prohibitively high (D) Yes; but the air flow rate should be excessively high

Description : Can a cooling tower cool water below the wet bulb temperature of inlet air? (A) Yes (B) No (C) Yes; but height of cooling tower will be prohibitively high (D) Yes; but the air flow rate should be excessively high

Last Answer : (B) No

Organic catalysts differ from the inorganic catalyst in the sense that the former is (A) Active at cryogenic temperatures only (B) Prohibitively costly (C) Proteinous in nature (D) Active at very high temperature only

Description : Organic catalysts differ from the inorganic catalyst in the sense that the former is (A) Active at cryogenic temperatures only (B) Prohibitively costly (C) Proteinous in nature (D) Active at very high temperature only

Last Answer : (C) Proteinous in nature

__________ is used for producing a thick suspension from a thin slurry. (A) Cartridge filter (B) Rotary drum vacuum filter (C) Pressure filter thickener (D) Plate and frame filter press

Description : __________ is used for producing a thick suspension from a thin slurry. (A) Cartridge filter (B) Rotary drum vacuum filter (C) Pressure filter thickener (D) Plate and frame filter press

Last Answer : (C) Pressure filter thickener

Out of the following gas-liquid contacting devices, for a given set of operating conditions, gas pressure drop is the least in __________ tower. (A) Wetted wall (B) Bubble cap (C) Perforated tray (D) Packed

Description : Out of the following gas-liquid contacting devices, for a given set of operating conditions, gas pressure drop is the least in __________ tower. (A) Wetted wall (B) Bubble cap (C) Perforated tray (D) Packed

Last Answer : (A) Wetted wall

A pump operating under specific conditions delivers insufficient quantity of liquid. This may be set right by (A) Decreasing the size of the inlet pipe (B) Increasing the size of the inlet pipe (C) Lowering the pump position (D) Both (B) and (C)

Description : A pump operating under specific conditions delivers insufficient quantity of liquid. This may be set right by (A) Decreasing the size of the inlet pipe (B) Increasing the size of the inlet pipe (C) Lowering the pump position (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

Filter aid is used to (A) Increase the rate of filtration (B) Decrease the pressure drop (C) Increase the porosity of the cake (D) Act as a support base for the septum

Description : Filter aid is used to (A) Increase the rate of filtration (B) Decrease the pressure drop (C) Increase the porosity of the cake (D) Act as a support base for the septum

Last Answer : (C) Increase the porosity of the cake

The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate(B) Pressure(C) Both (A) & (B)(D) Neither (A) nor (B

Description : The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

. In filtration, the use of 'filter aid' helps in (A) Reducing the filtration pressure (B) Accelerating the rate of filtration (C) Deplugging the filter medium (D) Enhancing the cake porosity in case of a dense impermeable cake

Description : . In filtration, the use of 'filter aid' helps in (A) Reducing the filtration pressure (B) Accelerating the rate of filtration (C) Deplugging the filter medium (D) Enhancing the cake porosity in case of a dense impermeable cake

Last Answer : (C) Deplugging the filter medium

Under normal conditions, the speed of a two-speed squirrel cage induction motor is changed by varying the ____________. A. frequency of the applied voltage B. resistance in the rotor circuit C. number of field poles D. amplitude of the applied voltage

Description : Under normal conditions, the speed of a two-speed squirrel cage induction motor is changed by varying the ____________. A. frequency of the applied voltage B. resistance in the rotor circuit C. number of field poles D. amplitude of the applied voltage

Last Answer : Answer: C

The development of global regulatory systems in prokaryotes A- determines the exact location of the cell on the globe B- aids in DNA replication C- .determines the exact location of the replication site D- regulates many genes under varying environmental conditions

Description : The development of global regulatory systems in prokaryotes A- determines the exact location of the cell on the globe B- aids in DNA replication C- .determines the exact location of the replication site D- regulates many genes under varying environmental conditions

Last Answer : regulates many genes under varying environmental conditions

............... is a large operating system core provides a wide range of services. A) Multilithic kernel B) Monolithic kernel C) Micro kernel D) Macro kernel

Description : ............... is a large operating system core provides a wide range of services. A) Multilithic kernel B) Monolithic kernel C) Micro kernel D) Macro kernel

Last Answer : D) Macro kernel

Which of the following is a batch sedimentation equipment? (A) Dust catcher (B) Filter thickener (C) Dry cyclone separator (D) Rotary sprayer scrubber

Description : Which of the following is a batch sedimentation equipment? (A) Dust catcher (B) Filter thickener (C) Dry cyclone separator (D) Rotary sprayer scrubber

Last Answer : (B) Filter thickener

Removal of activated carbon from glycerine is done by (A) Plate and frame filter (B) Rotary vacuum filter (C) Batch basket centrifuge (D) None of these

Description : Removal of activated carbon from glycerine is done by (A) Plate and frame filter (B) Rotary vacuum filter (C) Batch basket centrifuge (D) None of these

Last Answer : (A) Plate and frame filter

To announce the development of a new surgical breakthrough, a hospital management team feels it needs to get wide media coverage. Under these circumstances, which one of the following would probably be its best alternative? A)Captioned photograph B)Feature article C)Third party endorsement D)Television advertisement E)Press conference

Description : To announce the development of a new surgical breakthrough, a hospital management team feels it needs to get wide media coverage. Under these circumstances, which one of the following ... )Captioned photograph B)Feature article C)Third party endorsement D)Television advertisement E)Press conference

Last Answer : E)Press conference

Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, one reactant is charged batch wise, while the other reactant is fed continuously (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Description : Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, ... system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Last Answer : (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system

. A batch reactor suffers from following disadvantage. (A) Poor product quality control (B) High labour and handling cost (C) High shutdown time requirement for emptying, cleaning and refilling (D) All (A), (B) and (C)

Description : . A batch reactor suffers from following disadvantage. (A) Poor product quality control (B) High labour and handling cost (C) High shutdown time requirement for emptying, cleaning and refilling (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Flash distillation is suitable for the separation of components (A) Having very close boiling points (B) Which form maximum boiling azeotrope (C) Having very wide boiling points (D) Which form minimum boiling azeotrope

Description : Flash distillation is suitable for the separation of components (A) Having very close boiling points (B) Which form maximum boiling azeotrope (C) Having very wide boiling points (D) Which form minimum boiling azeotrope

Last Answer : (C) Having very wide boiling points

A wall has two layers of materials A and B; each made of a different material. Both the layers have the same thickness. The thermal conductivity of material A is twice that of B. Under the equilibrium, the temperature difference across the wall is 36°C. The temperature difference across the layer A is __________ °C. (A) 6 (B) 12 (C) 18 (D) 24

Description : A wall has two layers of materials A and B; each made of a different material. Both the layers have the same thickness. The thermal conductivity of material A is twice that of B. Under the equilibrium, the temperature ... difference across the layer A is __________ °C. (A) 6 (B) 12 (C) 18 (D) 24

Last Answer : (B) 12

For absorbers, high pressure drop results in (A) Increased efficiency (B) Decreased efficiency (C) High operating cost (D) Better gas liquid contact

Description : For absorbers, high pressure drop results in (A) Increased efficiency (B) Decreased efficiency (C) High operating cost (D) Better gas liquid contact

Last Answer : (C) High operating cost

Steel pipe are (A) Suitable for withstanding high internal pressure (B) Connected by riveted or welded joints (C) Generally laid underground and no expansion joint is required (D) Likely to last 100 years under ordinary conditions

Description : Steel pipe are  (A) Suitable for withstanding high internal pressure  (B) Connected by riveted or welded joints  (C) Generally laid underground and no expansion joint is required  (D) Likely to last 100 years under ordinary conditions 

Last Answer : (D) Likely to last 100 years under ordinary conditions