Whenever data is transferred between devices, it involves the exchange of prearranged signals; what is this process called?

Whenever data is transferred between devices, it involves  the exchange of prearranged signals; what is this process  called?
by

1 Answer

Answer :

Handshaking.
by

Related questions

what is the base word in prearranged?

Description : what is the base word in prearranged?

Last Answer : arranged

In 8085, whenever a signal is received at TRAP terminal, its program execution is transferred to a subroutine

Description : In 8085, whenever a signal is received at TRAP terminal, its program execution is transferred to a subroutine on address A) 0000 H B) 002C H C) 0024 H D) 0004 H

Last Answer : In 8085, whenever a signal is received at TRAP terminal, its program execution is transferred to a subroutine on address 0024 H

If a position servo system tends to oscillate whenever a new position is selected, is the system overdamped or underdamped?

Description : If a position servo system tends to oscillate whenever a new position is selected, is the system overdamped or underdamped?

Last Answer : Underdamped

Which of the following are the characteristic features of communication? (a) Communication involves exchange of ideas, facts and opinions. (b) Communication involves both information and understanding. (c) Communication is a continuous process. (d) Communication is a circular process. Select the correct answer from the codes given below: (A) (a), (b), (c) and (d) (B) (a), (b) and (c) (C) (a), (b) and (d) (D) (b), (c) and (d)

Description : Which of the following are the characteristic features of communication? (a) Communication involves exchange of ideas, facts and opinions. (b) Communication involves both information and understanding. (c) Communication is a continuous process. (d ... ) (C) (a), (b) and (d) (D) (b), (c) and (d)

Last Answer : Answer: A

When a wave is reflected from a surface, energy is transferred. When is the transfer of energy greatest?

Description : When a wave is reflected from a surface, energy is transferred. When is the transfer of energy greatest?

Last Answer : When the incident wave is nearly parallel with the surface.

All the power sent down a transmission line from a transmitter can be transferred to an antenna under what optimum conditions?

Description : All the power sent down a transmission line from a transmitter can be transferred to an antenna under what optimum conditions?

Last Answer : When the characteristic impedance of the transmission line and the load impedance are equal.

When necessary, the results are transferred from the CPU to main memory by _______ A. I/O devices. B. CPU. C. Shift registers. D. None of the Above.

Description : When necessary, the results are transferred from the CPU to main memory by _______ A. I/O devices. B. CPU. C. Shift registers. D. None of the Above.

Last Answer : C. Shift registers.

Describe how dialed digits are transferred from a subscriber’s telephone tothe local exchange?

Description : Describe how dialed digits are transferred from a subscriber’s telephone tothe local exchange?

Last Answer : dbbrkm

Set rules implementing and governing an orderly exchange of data between layers of two devices, such as line control units and front – end processors.

Description : Set rules implementing and governing an orderly exchange of data between layers of two devices, such as line control units and front – end processors.

Last Answer : Data Link Protocol

Which multiplexing technique involves signals composed of light beams? A) FDM B) TDM C) WDM D) none of the above

Description : Which multiplexing technique involves signals composed of light beams? A) FDM B) TDM C) WDM D) none of the above

Last Answer : WDM

What type of maintenance involves isolating equipment troubles and replacing defective parts?

Description : What type of maintenance involves isolating equipment troubles and replacing defective parts?

Last Answer : Corrective maintenance.

What procedure involves the use of finely braided copper wire to remove solder?

Description : What procedure involves the use of finely braided copper wire to remove solder?

Last Answer : Wicking.

In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Description : In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Last Answer : The signals are opposite in polarity or 180 degrees out of phase with each other.

Which transistor configuration provides a phase reversal between the input and output signals?

Description : Which transistor configuration provides a phase reversal between the input and output signals?

Last Answer : Common emitter.

What type of MOSFET can be independently controlled by two separate signals?

Description : What type of MOSFET can be independently controlled by two separate signals?

Last Answer : The dual-gate MOSFET.

The input and output signals of a JFET amplifier have what phase relationship?

Description : The input and output signals of a JFET amplifier have what phase relationship?

Last Answer : They are 180 degrees out of phase.

What is used to bias a magnetic amplifier so that the control winding remains free to accept control (input) signals?

Description : What is used to bias a magnetic amplifier so that the control winding remains free to accept control (input) signals?

Last Answer : A bias winding and associated circuitry.

If the input signals are 180 degrees out of phase with each other and a combined output is taken between the two output terminals, what will the amplitude of the combined output signal be?

Description : If If the input signals are 180 degrees out of phase with each other and a combined output is taken between the two output terminals, what will the amplitude of the combined output signal be?

Last Answer : 200 millivolts.

If the input signals are 180 degrees out of phase with each other, what will be the peak-to-peak amplitude of the output signals?

Description : If the input signals are 180 degrees out of phase with each other, what will be the peak-to-peak amplitude of the output signals?

Last Answer : Each output signal will be 100 millivolts.

If the input signals are in phase, what will be the peak-to peak amplitude of the output signals?

Description : If the input signals are in phase, what will be the peak-to peak amplitude of the output signals?

Last Answer : 0 volts (the input signals will "cancel out").

If the differential amplifier is configured with a single input and differential outputs, what will the output signals be?

Description : If the differential amplifier is configured with a single input and differential outputs, what will the output signals be?

Last Answer : Each output will be a sine wave with a peak-to-peak amplitude of 100 millivolts. The output signals will be 180 degrees out of phase with each other.

If the two input signals to a difference amplifier are equal in amplitude but neither in phase nor 180 degrees out of phase, what will the output signal be?

Description : If the two input signals to a difference amplifier are equal in amplitude but neither in phase nor 180 degrees out of phase, what will the output signal be?

Last Answer : . A different shape than the input signals but larger in amplitude.

If the two input signals to a difference amplifier are equal in amplitude and 180 degrees out of phase, what will the output signal be?

Description : If the two input signals to a difference amplifier are equal in amplitude and 180 degrees out of phase, what will the output signal be?

Last Answer : Equal in shape and frequency to each input signal and larger in amplitude by two times than

. If the two input signals of a difference amplifier are in phase and equal in amplitude, what will the output signal be?

Description : . If the two input signals of a difference amplifier are in phase and equal in amplitude, what will the output signal be?

Last Answer : No output (the signals will "cancel out").

In the power amplifier shown in figure 2-10, what two signals are mixed to produce the output signal? In the power amplifier shown in figure 2-10, what two signals are mixed to produce the output signal?

Description : In the power amplifier shown in figure 2-10, what two signals are mixed to produce the output signal?

Last Answer : Local oscillator and coherent oscillator.

What radar subsystem supplies timing signals to coordinate the operation of the complete system?

Description : What radar subsystem supplies timing signals to coordinate the operation of the complete system?

Last Answer : Synchronizer.

Why is it important to minimize TBE jitter in magnetic tape recordings where precise timing relationships exist between two or more signals?

Description : Why is it important to minimize TBE jitter in magnetic tape recordings where precise timing relationships exist between two or more signals?

Last Answer : The jitter could cause noise and a loss of accuracy.

Two tape recorders have signal-to-noise ratios (SNRs) of 25-dB RMS and 35-dB RMS respectively. Which of the SNRs can record and reproduce the widest range of input signals and why?

Description : Two tape recorders have signal-to-noise ratios (SNRs) of 25-dB RMS and 35-dB RMS respectively. Which of the SNRs can record and reproduce the widest range of input signals and why?

Last Answer : 35-dB RMS because the highest SNR can always record and reproduce the widest range of input signals.

Which of the two types of magnetic tape is used to record audio and instrumentation type signals in the VLF to 2.5MHz frequency range?

Description : Which of the two types of magnetic tape is used to record audio and instrumentation type signals in the VLF to 2.5MHz frequency range?

Last Answer : Analog magnetic tape.

When referring to spectrum analyzers, what is meant by the term resolving signals?

Description : When referring to spectrum analyzers, what is meant by the term resolving signals?

Last Answer : The ability of the analyzer to discriminate between display signals of slightly different frequencies.

What does manual gain control do to strong and weak signals, respectively?

Description : What does manual gain control do to strong and weak signals, respectively?

Last Answer : Attenuates the strong and amplifies the weak.

What category of digital tape recorder is used to record special signals with a bandwidth of less than 500 kHz?

Description : What category of digital tape recorder is used to record special signals with a bandwidth of less than 500 kHz?

Last Answer : Instrumentation digital tape recorders.

Why can phase-modulated signals be detected by fm detectors?

Description : Why can phase-modulated signals be detected by fm detectors?

Last Answer : Because of the incidental frequency shift that is caused while phase-shifting a carrier wave that is similar to fm modulation.

How does heterodyning distinguish between cw signals?

Description : How does heterodyning distinguish between cw signals?

Last Answer : By giving a different beat frequency for each signal.

What principle is used to help distinguish between two cw signals that are close in frequency?

Description : What principle is used to help distinguish between two cw signals that are close in frequency?

Last Answer : Heterodyning.

Cloud Computing Involves Sharing Information Among Electronic Devices?

Description : Cloud Computing Involves Sharing Information Among Electronic Devices?

Last Answer : Although it has a fancy name, the concept behind cloud computing is very simple. All data generated by a user must be easily instantly accessed, mobile, transferable and ready for use. The ... like. Shared data also includes information on the internet in social networks, blogs and similar websites.

Digital marketing is any form of marketing products or services that involves ___.  electronic devices  pen  money  book

Description : Digital marketing is any form of marketing products or services that involves ___.  electronic devices  pen  money  book

Last Answer : electronic devices

. What is not true about digital marketing? A. Digital marketing is any form of marketing products or services that involves electronic devices. B. Digital marketing can be done online C. Digital marketing cannot be done online D. Digital marketing is often referred to as online marketing, internet marketing or web marketing.

Description : . What is not true about digital marketing? A. Digital marketing is any form of marketing products or services that involves electronic devices. B. Digital marketing can be done online C ... D. Digital marketing is often referred to as online marketing, internet marketing or web marketing.

Last Answer : C. Digital marketing cannot be done online

What is not true about digital marketing? *  Digital marketing is any form of marketing products or services that involves electronic devices  Digital marketing can be done online  Digital marketing cannot be done online  Digital marketing is often referred to as online marketing, internet marketing or web marketing

Description : What is not true about digital marketing? *  Digital marketing is any form of marketing products or services that involves electronic devices  Digital marketing can be done online  Digital ...  Digital marketing is often referred to as online marketing, internet marketing or web marketing

Last Answer :  Digital marketing cannot be done online

What is not true about digital marketing? A. Digital marketing is any form of marketing products or services that involves electronic devices. B. Digital marketing can be done online C. Digital marketing cannot be done online D. Digital marketing is often referred to as online marketing, internet marketing or web marketing.

Description : What is not true about digital marketing? A. Digital marketing is any form of marketing products or services that involves electronic devices. B. Digital marketing can be done online C. ... D. Digital marketing is often referred to as online marketing, internet marketing or web marketing.

Last Answer : C. Digital marketing cannot be done online

Digital marketing is any form of marketing products or services that involves ___.  electronic devices  pen  money  book

Description : Digital marketing is any form of marketing products or services that involves ___.  electronic devices  pen  money  book

Last Answer :  electronic devices

a long-term relationship between two species that usually involves an exchange of food or energy is -General Knowledge

Description : a long-term relationship between two species that usually involves an exchange of food or energy is -General Knowledge

Last Answer : A long-term relationship between two species that usually involves an exchange of food or energy is Symbiosis.

In Lungs there if definity exchange of ions between RBC and Plasma. Removal of `CO_(2)` from blood involves -

Description : In Lungs there if definity exchange of ions between RBC and Plasma. Removal of `CO_(2)` from blood involves -

Last Answer : In Lungs there if definity exchange of ions between RBC and Plasma. Removal of `CO_(2)` from blood involves ... efflux of `HCO_(3)^(c-)` ions from RBC

Corrosion involves exchange of electrons in __________ corrosion. (A) Chemical (B) Electrochemical (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Corrosion involves exchange of electrons in __________ corrosion. (A) Chemical (B) Electrochemical (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Syntrophism involves A- exchange of nutrients between two species B- exchange of nutrients among species C- no exchange of nutrients between two species D- no exchange of nutrients among species

Description : Syntrophism involves A- exchange of nutrients between two species B- exchange of nutrients among species C- no exchange of nutrients between two species D- no exchange of nutrients among species

Last Answer : exchange of nutrients between two species

One of the methods of purification of leach liquor is ion exchange, which involves (A) Exchange between two liquid phases (B) Exchange between a gaseous phase and a liquid phase (C) Exchange between a liquid phase and an organic resin phase (D) Exchange between a solid phase and a gas phase

Description : One of the methods of purification of leach liquor is ion exchange, which involves (A) Exchange between two liquid phases (B) Exchange between a gaseous phase and a liquid phase (C) Exchange between a liquid phase and an organic resin phase (D) Exchange between a solid phase and a gas phase

Last Answer : (C) Exchange between a liquid phase and an organic resin phase

Which exchange-rate system involves a “leaning against the wind” strategy in which short-term fluctuations in exchange rates are reduced without adhering to any particular exchange rate over the long run? A. Pegged or fixed exchange rates B. Adjustable pegged exchange rates C. Managed floating exchange rates D. Freely floating exchange rates

Description : Which exchange-rate system involves a leaning against the wind strategy in which short-term fluctuations in exchange rates are reduced without adhering to any particular exchange rate over the ... pegged exchange rates C. Managed floating exchange rates D. Freely floating exchange rates

Last Answer : C. Managed floating exchange rates

hich exchange-rate system involves a “leaning against the wind” strategy in which short-term fluctuations in exchange rates are reduced without adhering to any particular exchange rate over the long run? A. Pegged or fixed exchange rates B. Adjustable pegged exchange rates C. Managed floating exchange rates D. Freely floating exchange rates

Description : hich exchange-rate system involves a leaning against the wind strategy in which short-term fluctuations in exchange rates are reduced without adhering to any particular exchange rate over ... Adjustable pegged exchange rates C. Managed floating exchange rates D. Freely floating exchange rates

Last Answer : C. Managed floating exchange rates

As shown in the illustration, what is the meaning of the numbers in brackets [ ] at location '31/33U'? EL-0100 A. Four separate devices with these part numbers feed signals into this point. B. There is a 33 kOhm bridge resistor at each of these locations in the wheelhouse. C. Wire '33K' continues on those four pages and connects to devices at the indicated coordinates. D. None of the above.

Description : As shown in the illustration, what is the meaning of the numbers in brackets [ ] at location '31/33U'? EL-0100 A. Four separate devices with these part numbers feed signals into this point. ... continues on those four pages and connects to devices at the indicated coordinates. D. None of the above.

Last Answer : Answer: C