What is the greatest danger to a transistor?

1 Answer

Answer :

Heat.

Related questions

Description : In a sawtooth generator, why is the transistor turned on for a longer time than the discharge time of the RC network?

Last Answer : To allow the capacitor time to discharge.

Description : What are the factors that limit the frequency response of a transistor amplifier?

Last Answer : The capacitance and inductance of the circuit and the interelectrode capacitance of the transistor.

Description : When you are using an ohmmeter to test a transistor for leakage, what is indicated by a low, but not shorted, reverse resistance reading?

Last Answer : A leaking transistor

Description : When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Last Answer : Normal gain.

Description : What are two transistor tests that can be done with an ohmmeter?

Last Answer : Gain and junction resistance.

Description : How is the collector lead identified on an oval-shaped transistor?

Last Answer : By the wide space between the collector lead and the other two leads (emitter and base)

Description : What safety precaution must be taken before replacing a transistor?

Last Answer : The power must be removed from the circuit.

Description : Which transistor configuration has the highest input resistance?

Last Answer : Common collector.

Description : Which transistor configuration has a current gain of less than 1?

Last Answer : Common base.

Description : What method for checking transistors is cumbersome when more than one transistor is bad in a circuit?

Last Answer : The substitution method.

Description : List three items of information normally included in the general description section of a specification sheet for a transistor.

Last Answer : The kind of transistor, the transistor's common applications, and mechanical data

Description : In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Last Answer : The signals are opposite in polarity or 180 degrees out of phase with each other.

Description : Name the two current loops in a transistor.

Last Answer : The base current loop and the collector current loop

Description : What is the relationship between the polarity of the voltage applied to the PNP transistor and that applied to the NPN transistor?

Last Answer : The polarity of voltage applied to the PNP transistor is opposite of that applied to the NPN

Description : What are the majority current carriers in a PNP transistor?

Last Answer : Holes.

Description : What percentage of current in an NPN transistor reaches the collector?

Last Answer : 98 percent.

Description : In the NPN transistor, what section is made very thin compared with the other two sections?

Last Answer : The P or base section.

Description : Which transistor configuration provides a phase reversal between the input and output signals?

Last Answer : Common emitter.

Description : What are the three transistor configurations?

Last Answer : Common emitter (CE), common base (CB), and common collector (CC)

Description : To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

Last Answer : Positive, more positive.

Description : What is one of the most important parts of any transistor manufacturing process?

Last Answer : Quality control.

Description : What was the name of the very first transistor?

Last Answer : Point-contact.

Description : In which direction does the arrow point on an NPN transistor?

Last Answer : Outward.

Description : What electronic function made the transistor famous?

Last Answer : Amplification.

Description : The base of a transistor serves a purpose similar to what element of the FET

Last Answer : Gate.

Description : What is one of the primary advantages of the FET when compared to the bipolar transistor?

Last Answer : High input impedance.

Description : What two transistor amplifier configurations are combined in the single-transistor, two-input, single-output difference amplifier?

Last Answer : Common emitter (CE) and common base (CB)

Description : Why is a high-gain transistor used in the phase-shift oscillator?

Last Answer : Because of the losses encountered in the RC networks.

Description : What are the three basic configurations of transistor oscillators?

Last Answer : Common collector (CC), common emitter (CE), and common base (CB).

Description : As a transistor ages, what happens to the leakage current?

Last Answer : It tends to increase

Description : Which junction of the transistor in the common-emitter detector detects the modulation envelope?

Last Answer : Emitter-base junction

Description : What three functions does the transistor in a regenerative detector serve?

Last Answer : Oscillator, mixer, and detector.

Description : What simple, one-transistor detector circuit uses the heterodyne principle?

Last Answer : Regenerative detector.

Description : When you are using an ohmmeter to test a transistor, what range settings should be avoided?

Last Answer : Any range setting that produces a current flow through the transistor that exceeds 1 milliamp (usually R x 1 range)

Description : What is the major advantage of a transistor over a tube?

Last Answer : Rugged design.

Description : What characteristic of a transistor is varied in a semiconductor-reactance modulator?

Last Answer : Collector-to-emitter capacitance.

Description : What are the four classes of operation of a transistor amplifier?

Last Answer : A, AB, B, C.

Description : When a wave is reflected from a surface, energy is transferred. When is the transfer of energy greatest?

Last Answer : When the incident wave is nearly parallel with the surface.

Description : What is the greatest threat to a diode?

Last Answer : Heat.

Description : Where does the greatest amount of ionospheric absorption occur in the ionosphere?

Last Answer : Where ionization density is greatest.

Description : If a transmitting antenna is placed close to the ground, how should the antenna be polarized to give the greatest signal strength?

Last Answer : Vertically polarized.

Description : What is the greatest limiting factor in a receiver’s detectable range

Last Answer : Noise.

Description : What factor has the greatest effect on the physical size of a coaxial cable?

Last Answer : The dielectric constant of the insulating material.

Description : Which gyro rotor in figure 3-6, view (A) view (B) view (C), will have the greatest rigidity if all are rotated at the same speed?

Last Answer : C.

Description : When a wave is reflected from a surface, energy is reflected. When is the reflection of energy the greatest?

Last Answer : When the wave is nearly parallel to the reflecting surface.

Description : At what instant does the greatest voltage appear across the resistor in a series RC circuit when the capacitor is charging?

Last Answer : At the instant of the initiation of the action.

Description : What type of core produces the greatest inductance?

Last Answer : Magnetic-metal core.

Description : Does the emergence of AI and its use in science, put science in danger of becoming a religion, with AI as gods?

Last Answer : Sounds to me like an interesting science fantasy story, if well written, maybe. In reality, I think what you're talking about in the details section is something where scientists would look at such ... with religion, trying to barter a notion of faith for deceiving senses of comfort and security.

Description : What is one moment you realized that your life was in true danger, what did you do?

Last Answer : [deleted]

Description : Are danger related businesses allowed to operate without regulation in Bosnia? See detail.

Last Answer : It’s not a business. It’s an extreme sport.