What compWhat component(s) is/are used for high-frequency compensation for Q1?

What component(s) is/are used for high-frequency  compensation for Q1?
by

1 Answer

Answer :

L1, L2, and R5.
by

Related questions

What component(s) is/are used for low-frequency compensation for Q2?

Description : What component(s) is/are used for low-frequency compensation for Q2?

Last Answer : R9 and C5.

. What components form the load for Q1?

Description : . What components form the load for Q1?

Last Answer : C5 and the primary of T2.

A, when there is an increase in the input voltage, the forward bias of Q1 increases/decreases (which one).

Description : A, when there is an increase in the input voltage, the forward bias of Q1 increases/decreases (which one).

Last Answer : Increases.

the voltage drop across RS and R1 determines the amount of base-emitter ____ for Q1.

Description : the voltage drop across RS and R1 determines the amount of base-emitter ____ for Q1.

Last Answer : Bias.

The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the collector of 'Q1' C. acts as a low capacitive reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Description : The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the ... reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Last Answer : Answer: D

What component in an amplifier circuit tends to limit the low-frequency response of the amplifier?

Description : What component in an amplifier circuit tends to limit the low-frequency response of the amplifier?

Last Answer : The coupling capacitor (C3).

What device sweeps a band of frequencies to determine frequencies and amplitudes of each frequency component?

Description : What device sweeps a band of frequencies to determine frequencies and amplitudes of each frequency component?

Last Answer : Spectrum analyzer.

Which of the following statements is incorrect ? (a) Lightning arrestors are used before the switchgear (b) Shunt reactors are used as compensation reactors (c) The peak short current is (1.8 xV2) times the A.C. component (d) The MVA at fault is equal to base MVA divided by per unit equivalent fault reactance

Description : Which of the following statements is incorrect ? (a) Lightning arrestors are used before the switchgear (b) Shunt reactors are used as compensation reactors (c) The peak short current is (1.8 xV2) ... component (d) The MVA at fault is equal to base MVA divided by per unit equivalent fault reactance

Last Answer : (a) Lightning arrestors are used before the switchgear

Q1. Explain any one method of crop production which ensures high yield. -Science

Description : Q1. Explain any one method of crop production which ensures high yield. -Science

Last Answer : Plant breeding is one of the method adopted for high yield plant breeding and is implemented to improve the varieties of crops by breeding plants. Plants from various places/areas are picked up ... or cross-breeding is done among these diversities to get a crop/plant of anticipated characteristic.

What are the two compensating techniques used in frequency compensation?

Description : What are the two compensating techniques used in frequency compensation?

Last Answer : Two types of compensating techniques are used, they are, a. External compensation b. Internal compensation

What is the need for frequency compensation in practical op-amps?

Description : What is the need for frequency compensation in practical op-amps?

Last Answer : Frequency compensation is needed when large bandwidth and lower closed loop gain is desired. Compensating networks are used to control the phase shift and hence to improve the stability.

Q1. What are the desirable characters of bee varieties suitable for honey production? -Science

Description : Q1. What are the desirable characters of bee varieties suitable for honey production? -Science

Last Answer : The variety of bee should yield large amount of honey. The bees should stay for a longer period in bee hives The bees should not sting much. Bee should be disease resistant.

Q1. How are fish obtained? -Science

Description : Q1. How are fish obtained? -Science

Last Answer : Fishes are obtained in two ways: Capture fishing: obtaining fishes from natural resources Culture Fishery: culturing of fishes in freshwater ecosystem like river, pond and lake also including marine.

Q1. What management practices are common in dairy and poultry farming? -Science

Description : Q1. What management practices are common in dairy and poultry farming? -Science

Last Answer : Well-designed Hygienic shelter for dairy animals and poultry birds. Good quality proper food and fodder are provided to dairy animals and poultry birds. Importance for animal health by prevention ... caused by bacteria, virus, or fungi. Sunlight feasible and airy ventilated shelter for animals

Q1. Which method is commonly used for improving cattle breeds and why? -Science

Description : Q1. Which method is commonly used for improving cattle breeds and why? -Science

Last Answer : Cross breading is generally the best method adopted for improving the cattle breed quality. In this method, breeding is between two good cattle breed results in a new improved variety of cattle ... , care is taken to have a good resultant with high yield having resistance to climatic conditions.

Q1. Why should preventive measures and biological control methods be preferred for protecting crops? -Science

Description : Q1. Why should preventive measures and biological control methods be preferred for protecting crops? -Science

Last Answer : Over exposure of chemicals leads to environmental problems hence, biological methods are preferred for protecting crops from pathogens, insects and rodents along with increasing the production. Since chemicals are ... feed on it, hence bio-pesticides are used as the safe way of crop protection.

Q1. What are macro-nutrients and why are they called macronutrients? -Science

Description : Q1. What are macro-nutrients and why are they called macronutrients? -Science

Last Answer : Macro-nutrients are the fundamental elements that are used by plants in more quantity. Macro-nutrients needed by the plants are: • Macro-nutrients as the constituent of protoplasm ... proteins • Calcium is existing in cell wall • Magnesium is significant component of chlorophyll

Q1. Compare the use of manure and fertilizers in maintaining soil fertility. -Science

Description : Q1. Compare the use of manure and fertilizers in maintaining soil fertility. -Science

Last Answer : Manure improves the soil quality with added nutrients. Manure provides extra organic matter called humus to the soil and therefore increasing the water retention capacity of sandy soils and drainage in clayey ... do not get oxygen properly. The nature of soil changes either to basic or acidic.

Q1. How do biotic and abiotic factors affect crop production? -Science

Description : Q1. How do biotic and abiotic factors affect crop production? -Science

Last Answer : 2 major factors that affect the crop are: Biotic factors like insects, rodents, pests, and many more spread the disease and reduce crop production. Abiotic factors like humidity, temperature, moisture, wind, rain, flood and many more destroy the crop raised.

Q1. What do we get from cereals, pulses, fruits and vegetables? -Science

Description : Q1. What do we get from cereals, pulses, fruits and vegetables? -Science

Last Answer : Cereals are the source of carbohydrate and is main reason of energy. Pulses provide protein for growth and development Vegetables and fruits are loaded with minerals, vitamins, carbohydrates, proteins and fats for overall development.

For a charge Q1, the effect of charge Q2 on Q1 will be, a) F1 = F2 b) F1 = -F2 c) F1 = F2 = 0 d) F1 and F2 are not equal

Description : For a charge Q1, the effect of charge Q2 on Q1 will be, a) F1 = F2 b) F1 = -F2 c) F1 = F2 = 0 d) F1 and F2 are not equal

Last Answer : b) F1 = -F2

Find out the price elasticity in the following example : Price Demand 5(P1) 10(Q1) 4(P2) 15(Q2) (a) – 2.5 (b) + 3.5 (c) + 4.0 (d) + 2.5

Description : Find out the price elasticity in the following example : Price Demand 5(P1) 10(Q1) 4(P2) 15(Q2) (a) – 2.5 (b) + 3.5 (c) + 4.0 (d) + 2.5

Last Answer : (a) – 2.5

Guidelines on impurities in drug substances and drug products is given in _____ guidelines? A. ICH Q1 B. ICH Q2 C. ICH Q3 D. ICH Q4

Description : Guidelines on impurities in drug substances and drug products is given in _____ guidelines? A. ICH Q1 B. ICH Q2 C. ICH Q3 D. ICH Q4

Last Answer : B. ICH Q2

The guidelines that describe the stability testing of drug substances and drug products are? A. ICH Q2 B. ICH Q1 C. ICH Q8 D. ICH Q9

Description : The guidelines that describe the stability testing of drug substances and drug products are? A. ICH Q2 B. ICH Q1 C. ICH Q8 D. ICH Q9

Last Answer : B. ICH Q1

Q1.Seminal plasma, the fluid part of semen, is contributed by:

Description : Q1.Seminal plasma, the fluid part of semen, is contributed by: i) Seminal vesicle ii) Prostate gland iii) Urethra iv) Bulbourethral gland.

Last Answer : (b) i , ii and iv

Q1.Seminal plasma, the fluid part of semen, is contributed by:

Description : Q1.Seminal plasma, the fluid part of semen, is contributed by: i) Seminal vesicle ii) Prostate gland iii) Urethra iv) Bulbourethral gland. a. I and ii b. I,ii and iv c. ii,Iii and iv d. I and iv.

Last Answer : (b) i , ii and iv

What are the final values of Q1 and Q0 after 4 clock cycles, if initial values are 00 in the sequential circuit shown below: Image (A) 11 (B) 10 (C) 01 (D) 00

Description : What are the final values of Q1 and Q0 after 4 clock cycles, if initial values are 00 in the sequential circuit shown below: (A) 11 (B) 10 (C) 01 (D) 00

Last Answer : (D) 00

The transition function for the language L = {w|na(w) and nb(w) are both odd} is given by: δ(q0, a)=q1 ; δ(q0, b)=q2 δ(q1, a)=q0 ; δ(q1, b)=q3 δ(q2, a)=q3 ; δ(q2, b)=q0 δ(q3, a)=q2 ; δ(q3, b)=q1

Description : The transition function for the language L = {w|na(w) and nb(w) are both odd} is given by: δ(q0, a)=q1 ; δ(q0, b)=q2 δ(q1, a)=q0 ; δ(q1, b)=q3 δ(q2, a)=q3 ; δ(q2, b ... the automata are: (A) q0 and q0 respectively (B) q0 and q1 respectively (C) q0 and q2 respectively (D) q0 and q3 respectively 

Last Answer : (D) q0 and q3 respectively

Which of the following statement(s) is/are true concerning oxygen kinetics in a critically ill, febrile patient? a. Oxygen consumption will likely exceed three times normal b. The high cardiac output and pulse rate are designed to increase oxygen delivery c. The hyperdynamic response may actually increase oxygen delivery to exceed the increase in oxygen consumption d. The patient can maintain adequate compensation as long as the oxygen delivery/oxygen consumption rate is greater than 2:1

Description : Which of the following statement(s) is/are true concerning oxygen kinetics in a critically ill, febrile patient? a. Oxygen consumption will likely exceed three times normal b. The high cardiac ... adequate compensation as long as the oxygen delivery/oxygen consumption rate is greater than 2:1

Last Answer : Answer: b, d In critically ill patients oxygen consumption may be elevated or depressed, but slight to moderate elevations in oxygen consumption is the most common abnormality in critically ill patients. ... however, and the patient will remain stable as long as the ratio is greater than 2:1

What component in a blocking oscillator controls pulse width?

Description : What component in a blocking oscillator controls pulse width?

Last Answer : Transformer.

What component is in parallel with the output in a parallel limiter?

Description : What component is in parallel with the output in a parallel limiter?

Last Answer : The diode.

If current gain is required from an rf amplifier, what type of component should be used as an output coupling element?

Description : If current gain is required from an rf amplifier, what type of component should be used as an output coupling element?

Last Answer : A step-down transformer.

The area between base 1 and base 2 in a UJT acts as what type of common circuit component?

Description : The area between base 1 and base 2 in a UJT acts as what type of common circuit component?

Last Answer : Variable resistor.

Which receiver component converts the IF pulses to video pulses?

Description : Which receiver component converts the IF pulses to video pulses?

Last Answer : Detector.

Which component of the receiver produces the signal that is mixed with the received signal to produce the IF signal?

Description : Which component of the receiver produces the signal that is mixed with the received signal to produce the IF signal?

Last Answer : Local oscillator.

What transmitter component allows the radiation of a large number of discrete frequencies over a wide band?

Description : What transmitter component allows the radiation of a large number of discrete frequencies over a wide band?

Last Answer : . Frequency synthesizer.

What radar component permits the use of a single antenna for both transmitting and receiving?

Description : What radar component permits the use of a single antenna for both transmitting and receiving?

Last Answer : Duplexer.

When you are measuring a component using a bridge, what is the most common cause of inaccurate measurements?

Description : When you are measuring a component using a bridge, what is the most common cause of inaccurate measurements?

Last Answer : The capacitive and inductive characteristics of the test leads.

In an electron tube regulator, the electron tube replaces what component?

Description : In an electron tube regulator, the electron tube replaces what component?

Last Answer : Variable resistor.

Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Description : Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Last Answer : Splice.

Describe an optical fiber cable component (OFCC).

Description : Describe an optical fiber cable component (OFCC).

Last Answer : OFCCs are tight-buffer fiber surrounded by arimid yarn and a low-halogen outer jacket.

To perform microminiature component repair, a 2M technician must be currently certified in what area?

Description : To perform microminiature component repair, a 2M technician must be currently certified in what area?

Last Answer : Microminiature component repair.

When removing the component, under what circumstances may component leads be clipped?

Description : When removing the component, under what circumstances may component leads be clipped?

Last Answer : If the component is known to be defective or if the board may be damaged by normal desoldering.

What term describes a device used to conduct heat away from a component?

Description : What term describes a device used to conduct heat away from a component?

Last Answer : A thermal shunt.

In what direction are component leads clinched on single and double-sided boards?

Description : In what direction are component leads clinched on single and double-sided boards?

Last Answer : In the direction of the run.

How is oxide removed from pads and component leads?

Description : How is oxide removed from pads and component leads?

Last Answer : A fine abrasive.

A cylindrical copper block with resonant cavities around the circumference is used as what component of a magnetron?

Description : A cylindrical copper block with resonant cavities around the circumference is used as what component of a magnetron?

Last Answer : Anode or plate

The folded waveguide in a bwo serves the same purpose as what component in a twt?

Description : The folded waveguide in a bwo serves the same purpose as what component in a twt?

Last Answer : Helix.

What methods are used to prevent unwanted component interaction?

Description : What methods are used to prevent unwanted component interaction?

Last Answer : Ground planes, shielding, and component placement.

Microcircuit refers to any component containing what types of elements?

Description : Microcircuit refers to any component containing what types of elements?

Last Answer : Integrated circuits.