When removing the component, under what circumstances may component leads be clipped?

When removing the component, under what circumstances  may component leads be clipped?
by

1 Answer

Answer :

If the component is known to be defective or if the board may be  damaged by normal desoldering.
by

Related questions

In what direction are component leads clinched on single and double-sided boards?

Description : In what direction are component leads clinched on single and double-sided boards?

Last Answer : In the direction of the run.

How is oxide removed from pads and component leads?

Description : How is oxide removed from pads and component leads?

Last Answer : A fine abrasive.

If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at a time B. using a thermal shunt C. pre-oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Description : If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at ... oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Last Answer : Answer: B

Flux aids in soldering by removing what from surfaces to be soldered?

Description : Flux aids in soldering by removing what from surfaces to be soldered?

Last Answer : Oxides.

When you are testing individual components in a circuit, what may cause a defective component to appear good?

Description : When you are testing individual components in a circuit, what may cause a defective component to appear good?

Last Answer : A parallel resistor or diode of similar value.

What is that item of clothing/accessory called that is two clips on the end of an elastic piece, which is clipped to the back of a woman's shirt to make it tighter?

Description : What is that item of clothing/accessory called that is two clips on the end of an elastic piece, which is clipped to the back of a woman's shirt to make it tighter?

Last Answer : answer:It is called a cinch. http://acostumejewelryshop.com/cinch-dress-garment-clips-c-59.html

Does anyone have a good streamlined process for moving their clipped RSS articles into a proper idea organizer such as Evernote, DEVONthink, or some other tool?

Description : Does anyone have a good streamlined process for moving their clipped RSS articles into a proper idea organizer such as Evernote, DEVONthink, or some other tool?

Last Answer : http://veritrope.com/reviews/netnewswire-to-evernote-single-headline-or-tab-export-applescript i hope this is what you’re looking.

How is my bird flying with clipped wings?

Description : I had my parakeets wings clipped a day ago and he's still able to fly. What's up with that?

Last Answer : Clipping a bird's wings does not prevent it from flying entirely. They may not be able to fly as far or as much. Wings need to be clipped properly to allow some freedom of flight. If you're not sure how to clip the wings, have an avian vet or breeder show you how .

Should hydrangia blossoms be clipped off when they turn brown?

Description : Should hydrangia blossoms be clipped off when they turn brown?

Last Answer : Need Answer

I clipped my mr. Lincoln rose bush months ago nothing is growin out. Do I need to cut closer to the ground

Description : I clipped my mr. Lincoln rose bush months ago nothing is growin out. Do I need to cut closer to the ground

Last Answer : A lot of us lost roses bushes in the last bitter winter. I am going to do hay around mine this fall to protect them.

How do u prune a rose bush. I clipped it nothing coming out.

Description : How do u prune a rose bush. I clipped it nothing coming out.

Last Answer : Maybe it's dead. Clip the dead stems above any green shoots. We lost a lot of rose bushes over the winter here in New Jersey. Nails? Iron? It's a good idea to get a soil test prior to adding any materials to the soil. A good compost would be best substitute until you get the soil test.

Should I have my bird wings clipped?

Description : Should I have my bird wings clipped?

Last Answer : You can trim the primary feathers.

What is the clipped word of omnibus?

Description : What is the clipped word of omnibus?

Last Answer : Omni

Clipped word for hippopotamus?

Description : Clipped word for hippopotamus?

Last Answer : Hippo

Clipped word for demarcate?

Description : Clipped word for demarcate?

Last Answer : Mark

If an ordinary glass tube and a glass capillary tube are 'both clipped in a beaker of water, water rises in – (1) both (2) only the glass tube (3) only the capillary tube (4) neither

Description : If an ordinary glass tube and a glass capillary tube are 'both clipped in a beaker of water, water rises in – (1) both (2) only the glass tube (3) only the capillary tube (4) neither

Last Answer : (1) both Explanation: The rise or fall of liquid due to capillarity in a beaker of water depends upon the radius of the bore of the tube (s) which is/are dipped into it. The narrower the bore of ... in the tube. So in this case, water will rise in both the glass tube and the glass capillary tube.

If the electricity represented by the wave form in 'B' were applied to the left side of the illustrated circuit, the output on the right side would be ____________. EL-0064 A. direct current with the top lead positive with repect to the lower lead B. direct current, half wave rectified with a ripple frequency of 60 hz C. direct current with the top lead negative with repect to the lower lead D. clipped to a value equal to the square root of 3 times the input voltage value

Description : If the electricity represented by the wave form in 'B' were applied to the left side of the illustrated circuit, the output on the right side would be ____________. EL-0064 A. direct current with the ... lower lead D. clipped to a value equal to the square root of 3 times the input voltage value

Last Answer : Answer: C

Plants that have been clipped or pruned into two-dimensional forms are: a. Espalier b. Topiary c. Balanced d. Dynamic

Description : Plants that have been clipped or pruned into two-dimensional forms are: a. Espalier b. Topiary c. Balanced d. Dynamic

Last Answer : Espalier

Documents which are clipped or only stapled a) Will be accepted c) will be approved b) Will not be accepted d) none of above

Description : Documents which are clipped or only stapled a) Will be accepted c) will be approved b) Will not be accepted d) none of above

Last Answer : Will not be accepted

Consider a window bounded by the lines : x = 0; y= 0; x = 5 and y = 3. The line segment joining (–1, 0) and (4, 5), if clipped against this window will connect the points (A) (0, 1) and (2, 3) (B) (0, 1) and (3, 3) (C) (0, 1) and (4, 3) (D) (0, 1) and (3, 2)

Description : Consider a window bounded by the lines : x = 0; y= 0; x = 5 and y = 3. The line segment joining (–1, 0) and (4, 5), if clipped against this window will connect the points (A) (0, 1) and (2, 3) (B) (0, 1) and (3, 3) (C) (0, 1) and (4, 3) (D) (0, 1) and (3, 2)

Last Answer : (A) (0, 1) and (2, 3)

Let R be the rectangular window against which the lines are to be clipped using 2D Sutherland-Cohen line clipping algorithm. The rectangular window has lower left-hand corner at (-5,1) and upper righthand corner at (3,7). Consider the following three lines for clipping with the given end point co-ordinates: Line AB: A(-6,2) and B(-1,8) Line CD: C(-1,5) and D(4,8) Line EF: E(-2,3) and F(1,2) Which of the following line(s) is/are candidate for clipping? (A) AB (B) CD (C) EF (D) AB and CD

Description : Let R be the rectangular window against which the lines are to be clipped using 2D Sutherland-Cohen line clipping algorithm. The rectangular window has lower left-hand corner at (-5,1) and upper righthand corner at (3,7). ... s) is/are candidate for clipping? (A) AB (B) CD (C) EF (D) AB and CD

Last Answer : (D) AB and CD

Under what circumstances may you find yourself not being YOU?

Description : Under what circumstances may you find yourself not being YOU?

Last Answer : Yeah at fancy dress parties. Yay i’m Captain Scarlet.

Which list has properties which may not be struck under any circumstances without a commander's approval?

Description : Which list has properties which may not be struck under any circumstances without a commander's approval?

Last Answer : No-Strike List (NSL)

Under certain circumstances, the gut may become a source of sepsis and serve as the motor of systemic inflammatory response syndrome. Microbial translocation is the process by which microorganisms migrate across the mucosal barrier to invade the host. Which of the following mechanisms can promote bacterial translocation? a. An increased number of gut bacteria b. Altered intestinal mucosal permeability c. Decreased host defense mechanisms d. Lack of enteral feeding

Description : Under certain circumstances, the gut may become a source of sepsis and serve as the motor of systemic inflammatory response syndrome. Microbial translocation is the process by which microorganisms ... intestinal mucosal permeability c. Decreased host defense mechanisms d. Lack of enteral feeding

Last Answer : Answer: a, b, c, d 99 Translocation is promoted in three general ways: 1) altered permeability of the intestinal mucosa as caused by shock, sepsis, distant injury, or cell toxins; 2) ... trauma patient d. Fifty percent of non-nitrogen caloric requirements should be provided in the form of fat

A professional accountant may be associated with a tax return that a. Contains a false or misleading statement. b. Contains statements or information furnished recklessly or without any real knowledge of whether they are true or false. c. Omits or obscures information required to be submitted and such omission or obscurity would mislead the revenue authorities. d. Uses of estimates if such use is generally acceptable or if it is impractical under the circumstances to obtain exact data

Description : A professional accountant may be associated with a tax return that a. Contains a false or misleading statement. b. Contains statements or information furnished recklessly or without any real ... use is generally acceptable or if it is impractical under the circumstances to obtain exact data

Last Answer : Uses of estimates if such use is generally acceptable or if it is impractical under the circumstances to obtain exact data

4) The channel that includes both a manufacturer's agent and an industrial distributor may be appropriate under which of the following circumstances? A)When a marketer wishes to enter a new geographic market but does not wish to expand the existing sales force B)When the sales force is large and the marketer is thinking of cutting it down C)When customers are highly concentrated in one geographic area

Description : 4) The channel that includes both a manufacturer's agent and an industrial distributor may be appropriate under which of the following circumstances? A)When a marketer wishes to enter a new ... marketer is thinking of cutting it down C)When customers are highly concentrated in one geographic area

Last Answer : A)When a marketer wishes to enter a new geographic market but does not wish to expand the existing sales force

The channel that includes both a manufacturers' agent and an industrial distributor may be appropriate under which of the following circumstances? A)When the firm wants specialised personnel to follow up the work of the sales force B)When the marketer wishes to enter a new geographic market but does not wish to expand the existing sales force C)When only one or two channels of distribution are available for products D)When the sales force is large and the marketer is thinking of cutting it down E)When customers are highly concentrated in one geographic area

Description : The channel that includes both a manufacturers' agent and an industrial distributor may be appropriate under which of the following circumstances? A)When the firm wants specialised personnel to follow ... is thinking of cutting it down E)When customers are highly concentrated in one geographic area

Last Answer : B)When the marketer wishes to enter a new geographic market but does not wish to expand the existing sales force

The leads to the primary and the high-voltage secondary windings of a power transformer usually are of what color?

Description : The leads to the primary and the high-voltage secondary windings of a power transformer usually are of what color?

Last Answer : Primary leads-black; secondary leads red.

When you zero a synchro with a synchro tester, what is indicated by a jump in the synchro tester's dial when the S1 and S3 leads are momentarily shorted?

Description : When you zero a synchro with a synchro tester, what is indicated by a jump in the synchro tester's dial when the S1 and S3 leads are momentarily shorted?

Last Answer : The synchro under test is not on electrical zero.

What two receiver leads are reversed to reverse the rotor's direction of rotation?

Description : What two receiver leads are reversed to reverse the rotor's direction of rotation?

Last Answer : 1 and S3.

What leads in a simple synchro system are connected to the ac power line?

Description : What leads in a simple synchro system are connected to the ac power line?

Last Answer : The rotor leads.

What is the purpose of the spring or wire around the leads of a new MOSFET?

Description : What is the purpose of the spring or wire around the leads of a new MOSFET?

Last Answer : To prevent damage from static electricity.

Leads are formed approximately how many degrees from their major axis?

Description : Leads are formed approximately how many degrees from their major axis?

Last Answer : 90 degrees

Current leads voltage by 90° (ICE)

Description : Current leads voltage by 90° (ICE)

Last Answer : Current leads voltage by 90° (ICE)

. A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Description : . A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Last Answer : Zero.

A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Description : A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Last Answer : Zero.

How do you compensate for the resistance of the test leads of a meter?

Description : How do you compensate for the resistance of the test leads of a meter?

Last Answer : . By zeroing the meter with the test leads shorted.

What component in a blocking oscillator controls pulse width?

Description : What component in a blocking oscillator controls pulse width?

Last Answer : Transformer.

What component is in parallel with the output in a parallel limiter?

Description : What component is in parallel with the output in a parallel limiter?

Last Answer : The diode.

What component(s) is/are used for low-frequency compensation for Q2?

Description : What component(s) is/are used for low-frequency compensation for Q2?

Last Answer : R9 and C5.

What compWhat component(s) is/are used for high-frequency compensation for Q1?

Description : What component(s) is/are used for high-frequency compensation for Q1?

Last Answer : L1, L2, and R5.

What component in an amplifier circuit tends to limit the low-frequency response of the amplifier?

Description : What component in an amplifier circuit tends to limit the low-frequency response of the amplifier?

Last Answer : The coupling capacitor (C3).

If current gain is required from an rf amplifier, what type of component should be used as an output coupling element?

Description : If current gain is required from an rf amplifier, what type of component should be used as an output coupling element?

Last Answer : A step-down transformer.

The area between base 1 and base 2 in a UJT acts as what type of common circuit component?

Description : The area between base 1 and base 2 in a UJT acts as what type of common circuit component?

Last Answer : Variable resistor.

Which receiver component converts the IF pulses to video pulses?

Description : Which receiver component converts the IF pulses to video pulses?

Last Answer : Detector.

Which component of the receiver produces the signal that is mixed with the received signal to produce the IF signal?

Description : Which component of the receiver produces the signal that is mixed with the received signal to produce the IF signal?

Last Answer : Local oscillator.