What component(s) is/are used for low-frequency compensation for Q2?

What component(s) is/are used for low-frequency  compensation for Q2?
by

1 Answer

Answer :

R9 and C5.
by

Related questions

What compWhat component(s) is/are used for high-frequency compensation for Q1?

Description : What component(s) is/are used for high-frequency compensation for Q1?

Last Answer : L1, L2, and R5.

What component in an amplifier circuit tends to limit the low-frequency response of the amplifier?

Description : What component in an amplifier circuit tends to limit the low-frequency response of the amplifier?

Last Answer : The coupling capacitor (C3).

What device sweeps a band of frequencies to determine frequencies and amplitudes of each frequency component?

Description : What device sweeps a band of frequencies to determine frequencies and amplitudes of each frequency component?

Last Answer : Spectrum analyzer.

Which of the following statements is incorrect ? (a) Lightning arrestors are used before the switchgear (b) Shunt reactors are used as compensation reactors (c) The peak short current is (1.8 xV2) times the A.C. component (d) The MVA at fault is equal to base MVA divided by per unit equivalent fault reactance

Description : Which of the following statements is incorrect ? (a) Lightning arrestors are used before the switchgear (b) Shunt reactors are used as compensation reactors (c) The peak short current is (1.8 xV2) ... component (d) The MVA at fault is equal to base MVA divided by per unit equivalent fault reactance

Last Answer : (a) Lightning arrestors are used before the switchgear

Q2. What is pasturage and how is it related to honey production? -Science

Description : Q2. What is pasturage and how is it related to honey production? -Science

Last Answer : Pasturage refers to the availability of flowers to the bees for easy accessibility for pollen collection and nectar. Kinds of flowers available will determine the taste of the honey, hence Pasturage is the main reason for good quality honey.

Q2. What are the advantages of composite fish culture? -Science

Description : Q2. What are the advantages of composite fish culture? -Science

Last Answer : Advantages of composite fish culture are: In a single fish pond, a combination of 5 or 6 types of fish species can be cultured since they do not compete for food among them. Food resource can be completely utilized Survival of the fish also increases More yield

Q2. What are the differences between broilers and layers and in their management? -Science

Description : Q2. What are the differences between broilers and layers and in their management? -Science

Last Answer : The poultry bird raised for meat purpose is called broiler. Broilers feed on protein rich adequate fat food. The level of vitamins A and K is kept high in the poultry feeds. Layers ... requirements of broilers vary from those of egg layers. Layers require proper lightning and enough space.

Q2. What factors may be responsible for losses of grains during storage? -Science

Description : Q2. What factors may be responsible for losses of grains during storage? -Science

Last Answer : Biotic and Abiotic factors are responsible for loss of grains during storage like: Rodents Pests Insects Fungi Bacteria Sunlight Flood Rain Temperature Moisture

Q2. What are the desirable agronomic characteristics for crop improvement? -Science

Description : Q2. What are the desirable agronomic characteristics for crop improvement? -Science

Last Answer : The essential agronomic features required for crop improvement are: Profuse branching along with tallness in any fodder crop Dwarfness in any cereals

Q2. How do plants get nutrients? -Science

Description : Q2. How do plants get nutrients? -Science

Last Answer : There are 16 basic essential nutrients required by the plants to grow. Carbon and Oxygen are supplied by water and the remaining nutrients are supplied through soil.

Find the following products: (i) (3x + 2y) (9X2 – 6xy + Ay2) (ii) (4x – 5y) (16x2 + 20xy + 25y2) (iii) (7p4 + q) (49p8 – 7p4q + q2) -Maths 9th

Description : Find the following products: (i) (3x + 2y) (9X2 – 6xy + Ay2) (ii) (4x – 5y) (16x2 + 20xy + 25y2) (iii) (7p4 + q) (49p8 – 7p4q + q2) -Maths 9th

Last Answer : answer:

For a charge Q1, the effect of charge Q2 on Q1 will be, a) F1 = F2 b) F1 = -F2 c) F1 = F2 = 0 d) F1 and F2 are not equal

Description : For a charge Q1, the effect of charge Q2 on Q1 will be, a) F1 = F2 b) F1 = -F2 c) F1 = F2 = 0 d) F1 and F2 are not equal

Last Answer : b) F1 = -F2

Drag force on the float of a Rotameter is (where Q = flow rate of the) (A) ∝ Q (B) ∝ √Q (C) ∝ Q2 (D) Constant

Description : Drag force on the float of a Rotameter is (where Q = flow rate of the) (A) ∝ Q (B) ∝ √Q (C) ∝ Q2 (D) Constant

Last Answer : (D) Constant

Find out the price elasticity in the following example : Price Demand 5(P1) 10(Q1) 4(P2) 15(Q2) (a) – 2.5 (b) + 3.5 (c) + 4.0 (d) + 2.5

Description : Find out the price elasticity in the following example : Price Demand 5(P1) 10(Q1) 4(P2) 15(Q2) (a) – 2.5 (b) + 3.5 (c) + 4.0 (d) + 2.5

Last Answer : (a) – 2.5

What is the phase relationship of the signal at the collector of Q2 to the signal at the collector of Q, A) 0° B) 90° C) 180° D) 360°.

Description : What is the phase relationship of the signal at the collector of Q2 to the signal at the collector of Q, A) 0° B) 90° C) 180° D) 360°.

Last Answer : C) 180°

The major function of transistor. Q2 is A) It provides voltage gain B) It provides the feedback signal C) It isolates the oscillator from loading effects D) It provides a phase shift.

Description : The major function of transistor. Q2 is A) It provides voltage gain B) It provides the feedback signal C) It isolates the oscillator from loading effects D) It provides a phase shift.

Last Answer : ) It provides a phase shift.

Guidelines on impurities in drug substances and drug products is given in _____ guidelines? A. ICH Q1 B. ICH Q2 C. ICH Q3 D. ICH Q4

Description : Guidelines on impurities in drug substances and drug products is given in _____ guidelines? A. ICH Q1 B. ICH Q2 C. ICH Q3 D. ICH Q4

Last Answer : B. ICH Q2

The guidelines that describe the stability testing of drug substances and drug products are? A. ICH Q2 B. ICH Q1 C. ICH Q8 D. ICH Q9

Description : The guidelines that describe the stability testing of drug substances and drug products are? A. ICH Q2 B. ICH Q1 C. ICH Q8 D. ICH Q9

Last Answer : B. ICH Q1

The transition function for the language L = {w|na(w) and nb(w) are both odd} is given by: δ(q0, a)=q1 ; δ(q0, b)=q2 δ(q1, a)=q0 ; δ(q1, b)=q3 δ(q2, a)=q3 ; δ(q2, b)=q0 δ(q3, a)=q2 ; δ(q3, b)=q1

Description : The transition function for the language L = {w|na(w) and nb(w) are both odd} is given by: δ(q0, a)=q1 ; δ(q0, b)=q2 δ(q1, a)=q0 ; δ(q1, b)=q3 δ(q2, a)=q3 ; δ(q2, b ... the automata are: (A) q0 and q0 respectively (B) q0 and q1 respectively (C) q0 and q2 respectively (D) q0 and q3 respectively 

Last Answer : (D) q0 and q3 respectively

What are the two compensating techniques used in frequency compensation?

Description : What are the two compensating techniques used in frequency compensation?

Last Answer : Two types of compensating techniques are used, they are, a. External compensation b. Internal compensation

What is the need for frequency compensation in practical op-amps?

Description : What is the need for frequency compensation in practical op-amps?

Last Answer : Frequency compensation is needed when large bandwidth and lower closed loop gain is desired. Compensating networks are used to control the phase shift and hence to improve the stability.

How does a capacitor and an inductor react to (a) low frequency and (b) high frequency?

Description : How does a capacitor and an inductor react to (a) low frequency and (b) high frequency?

Last Answer : At low-frequency, a capacitor acts as an open and an inductor acts as a short. At high-frequency, a capacitor acts as a short and an inductor acts as an open.

Is filtering better at a high frequency or at a low frequency?

Description : Is filtering better at a high frequency or at a low frequency?

Last Answer : At a high frequency.

Is better filtering achieved at a high frequency or at a low frequency at the input of the filter?

Description : Is better filtering achieved at a high frequency or at a low frequency at the input of the filter?

Last Answer : High

Why are LEDs preferred over laser diodes for low- and moderate-frequency analog applications?

Description : Why are LEDs preferred over laser diodes for low- and moderate-frequency analog applications?

Last Answer : LEDs require less complex circuitry than lasers.

Microwave antennas and low-frequency antennas are similar in what ways?

Description : Microwave antennas and low-frequency antennas are similar in what ways?

Last Answer : Operating principles and electrical characteristics.

What causes low-frequency flutter (below 1000 Hz)?

Description : What causes low-frequency flutter (below 1000 Hz)?

Last Answer : Rotating parts of a tape transport, such as irregular tape reels, sticking guides and pinch rollers, and capstans

Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Description : Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Last Answer : Bi-phase level encoding.

How would a compass react when placed close to a conductor carrying alternating current at a low frequency?

Description : How would a compass react when placed close to a conductor carrying alternating current at a low frequency?

Last Answer : The compass needle would swing back and forth as the current changed from positive to negative.

The main component responsible for the fall of gain of an RC coupled amplifier in low frequency

Description : The main component responsible for the fall of gain of an RC coupled amplifier in low frequency range is  (A) The active device itself (tube, or transistor)  (B) stray shunt capacitance Cs  (C) the grid leak resistance Rg  (D) coupling capacitor Cc

Last Answer : The main component responsible for the fall of gain of an RC coupled amplifier in low frequency range is coupling capacitor Cc

An AC generator operating in parallel loses its excitation without tripping the circuit breaker. This will __________. A. not affect the faulty generator due to the compensation of the other generators B. cause the slip rings to melt C. cause a low voltage differential to develop between the armature and the bus D. cause high currents to be induced in the field windings

Description : An AC generator operating in parallel loses its excitation without tripping the circuit breaker. This will __________. A. not affect the faulty generator due to the compensation of the other generators B. ... between the armature and the bus D. cause high currents to be induced in the field windings

Last Answer : Answer: D

The following is true of β-adrenergic blocker therapy in CHF: A. They are added to conventional therapy after cardiac compensation is restored B. They are indicated only in severe (NYHA class IV) heart failure C. They are to be used only at low doses D. All of the above

Description : The following is true of β-adrenergic blocker therapy in CHF: A. They are added to conventional therapy after cardiac compensation is restored B. They are indicated only in severe (NYHA class IV) heart failure C. They are to be used only at low doses D. All of the above

Last Answer : A. They are added to conventional therapy after cardiac compensation is restored

Angiotensin converting enzyme inhibitors afford maximum protection against progression of heart failure when used: A. At the higher therapeutic dose range over long term B. At the maximum tolerated dose only till haemodynamic compensation is restored C. At low doses over long term D. At low doses along with diuretics/digoxi

Description : Angiotensin converting enzyme inhibitors afford maximum protection against progression of heart failure when used: A. At the higher therapeutic dose range over long term B. At the maximum tolerated dose only till ... restored C. At low doses over long term D. At low doses along with diuretics/digoxi

Last Answer : A. At the higher therapeutic dose range over long term

What component in a blocking oscillator controls pulse width?

Description : What component in a blocking oscillator controls pulse width?

Last Answer : Transformer.

What component is in parallel with the output in a parallel limiter?

Description : What component is in parallel with the output in a parallel limiter?

Last Answer : The diode.

If current gain is required from an rf amplifier, what type of component should be used as an output coupling element?

Description : If current gain is required from an rf amplifier, what type of component should be used as an output coupling element?

Last Answer : A step-down transformer.

The area between base 1 and base 2 in a UJT acts as what type of common circuit component?

Description : The area between base 1 and base 2 in a UJT acts as what type of common circuit component?

Last Answer : Variable resistor.

Which receiver component converts the IF pulses to video pulses?

Description : Which receiver component converts the IF pulses to video pulses?

Last Answer : Detector.

Which component of the receiver produces the signal that is mixed with the received signal to produce the IF signal?

Description : Which component of the receiver produces the signal that is mixed with the received signal to produce the IF signal?

Last Answer : Local oscillator.

What transmitter component allows the radiation of a large number of discrete frequencies over a wide band?

Description : What transmitter component allows the radiation of a large number of discrete frequencies over a wide band?

Last Answer : . Frequency synthesizer.

What radar component permits the use of a single antenna for both transmitting and receiving?

Description : What radar component permits the use of a single antenna for both transmitting and receiving?

Last Answer : Duplexer.

When you are measuring a component using a bridge, what is the most common cause of inaccurate measurements?

Description : When you are measuring a component using a bridge, what is the most common cause of inaccurate measurements?

Last Answer : The capacitive and inductive characteristics of the test leads.

In an electron tube regulator, the electron tube replaces what component?

Description : In an electron tube regulator, the electron tube replaces what component?

Last Answer : Variable resistor.

Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Description : Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Last Answer : Splice.

Describe an optical fiber cable component (OFCC).

Description : Describe an optical fiber cable component (OFCC).

Last Answer : OFCCs are tight-buffer fiber surrounded by arimid yarn and a low-halogen outer jacket.

To perform microminiature component repair, a 2M technician must be currently certified in what area?

Description : To perform microminiature component repair, a 2M technician must be currently certified in what area?

Last Answer : Microminiature component repair.

When removing the component, under what circumstances may component leads be clipped?

Description : When removing the component, under what circumstances may component leads be clipped?

Last Answer : If the component is known to be defective or if the board may be damaged by normal desoldering.

What term describes a device used to conduct heat away from a component?

Description : What term describes a device used to conduct heat away from a component?

Last Answer : A thermal shunt.

In what direction are component leads clinched on single and double-sided boards?

Description : In what direction are component leads clinched on single and double-sided boards?

Last Answer : In the direction of the run.

How is oxide removed from pads and component leads?

Description : How is oxide removed from pads and component leads?

Last Answer : A fine abrasive.