The message “CHECK” to an aircraft means that you should: a. Confirm that you received and understood the last message b. Pass the required information to ATC c. Stay where you are d. Examine a system or procedure

The message “CHECK” to an aircraft means that you should:
a. Confirm that you received and understood the last message
b. Pass the required information to ATC
c. Stay where you are
d. Examine a system or procedure
by

1 Answer

Answer :

d. Examine a system or procedure
by

Related questions

The message “CHECK” to an aircraft means that you should: a. Confirm that you received and understood the last message b. Pass the required information to ATC c. Stay where you are d. Examine a system or procedure

Description : The message “CHECK” to an aircraft means that you should: a. Confirm that you received and understood the last message b. Pass the required information to ATC c. Stay where you are d. Examine a system or procedure

Last Answer : d. Examine a system or procedure

The response to general call from ATC is for the aircraft to: a. Respond in alphabetic order b. Respond in numerical order c. Give no response d. Request a repeat of the message

Description : The response to general call from ATC is for the aircraft to: a. Respond in alphabetic order b. Respond in numerical order c. Give no response d. Request a repeat of the message

Last Answer : c. Give no response

The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Description : The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Last Answer : c. Normal ATC is resumed after an emergency

The instruction “ORBIT”from ATC means that the aircraft should:

Description : The instruction “ORBIT”from ATC means that the aircraft should:

Last Answer : carry out one 360 degree turn only

The instruction “ORBIT” from ATC means that the aircraft should: a. Carry out a go around b. Continue with 360 degree turns c. Carry out one 360 degree turn only d. Reverse the direction of the turn

Description : The instruction “ORBIT” from ATC means that the aircraft should: a. Carry out a go around b. Continue with 360 degree turns c. Carry out one 360 degree turn only d. Reverse the direction of the turn

Last Answer : c. Carry out one 360 degree turn only

The message “CHECK” to an aircraft means that you would:

Description : The message “CHECK” to an aircraft means that you would:

Last Answer : examine a system or procedure

What visual technique should be used when searching for an aircraft? a. Sweep from side to side with the eyes covering the whole field of vision b. Search the sky portion by portion starting on the left c. Pinpoint 10° segments of the sky and confirm before passing onto another d. Use a succession of small and rapid eye movements

Description : What visual technique should be used when searching for an aircraft? a. Sweep from side to side with the eyes covering the whole field of vision b. Search the sky portion by portion starting ... the sky and confirm before passing onto another d. Use a succession of small and rapid eye movements

Last Answer : c. Pinpoint 10° segments of the sky and confirm before passing onto another

What visual technique should be used when searching for an aircraft? a. Sweep from side to side with the eyes covering the whole field of vision b. Search the sky portion by portion starting on the left c. Pinpoint 10° segments of the sky and confirm before passing onto another d. Use a succession of small and rapid eye movements

Description : What visual technique should be used when searching for an aircraft? a. Sweep from side to side with the eyes covering the whole field of vision b. Search the sky portion by portion starting ... the sky and confirm before passing onto another d. Use a succession of small and rapid eye movements

Last Answer : c. Pinpoint 10° segments of the sky and confirm before passing onto another

The instruction from ATC to an aircraft to abandon its take off includes the phrase:

Description : The instruction from ATC to an aircraft to abandon its take off includes the phrase:

Last Answer : STOP IMMEDIATELY

The response to general call from ATC is for the aircraft to:

Description : The response to general call from ATC is for the aircraft to:

Last Answer : give no response

Clearance limit is defined as: a. The flight level to which an aircraft is granted ATC clearance b. The time at which the ATC clearance expires c. The point to which aircraft is granted ATC clearance d. The height below which you will hit the first obstacle

Description : Clearance limit is defined as: a. The flight level to which an aircraft is granted ATC clearance b. The time at which the ATC clearance expires c. The point to which aircraft is granted ATC clearance d. The height below which you will hit the first obstacle

Last Answer : c. The point to which aircraft is granted ATC clearance

Aircraft A flies in VMC with an ATC clearance within a control area. Aircraft B without ATC clearance approaches at roughly the same height on a converging heading. Who has the right of way? a. Aircraft A, regardless of the direction from which B approaches b. Aircraft B, regardless of the direction from which A approaches c. Aircraft A, if B is to the right of him d. Aircraft B, if A is to the left of him

Description : Aircraft A flies in VMC with an ATC clearance within a control area. Aircraft B without ATC clearance approaches at roughly the same height on a converging heading. Who has the right of way? a. Aircraft A, regardless of ... A, if B is to the right of him d. Aircraft B, if A is to the left of him

Last Answer : d. Aircraft B, if A is to the left of him

The person having overall responsibility of an aircraft during flight is the: a. Pilot in command b. Operator c. ATC controller if the aircraft is in controlled airspace d. Owner of the aircraft

Description : The person having overall responsibility of an aircraft during flight is the: a. Pilot in command b. Operator c. ATC controller if the aircraft is in controlled airspace d. Owner of the aircraft

Last Answer : a. Pilot in command

The transition from IFR to VFR is done: a. On the Captain’s initiative b. Whenever an aircraft in VMC leaves controlled airspace c. If told by ATC d. At the clearance limit, disregarding the weather situation

Description : The transition from IFR to VFR is done: a. On the Captain’s initiative b. Whenever an aircraft in VMC leaves controlled airspace c. If told by ATC d. At the clearance limit, disregarding the weather situation

Last Answer : a. On the Captain’s initiative

When the aircraft carries serviceable Mode C transponder, the pilot shall continuously operate this mode: a. Only when directed by ATC b. Unless otherwise directed by ATC c. Only when the aircraft is flying within controlled airspace d. Regardless of ATC instructions

Description : When the aircraft carries serviceable Mode C transponder, the pilot shall continuously operate this mode: a. Only when directed by ATC b. Unless otherwise directed by ATC c. Only when the aircraft is flying within controlled airspace d. Regardless of ATC instructions

Last Answer : b. Unless otherwise directed by ATC

The transition from IFR to VFR is done: a. On the Captain’s initiative b. Whenever an aircraft in VMC leaves controlled airspace c. If told by ATC d. At the clearance limit, disregarding the weather situation

Description : The transition from IFR to VFR is done: a. On the Captain’s initiative b. Whenever an aircraft in VMC leaves controlled airspace c. If told by ATC d. At the clearance limit, disregarding the weather situation

Last Answer : a. On the Captain’s initiative

The minimum content of a readback of the message from ATC “X-CD CHANGE FREQUENCY TO STEPHENVILLE TOWER 118.7” is: a. 118.7 b. CHANGING FREQUENCY X-CD c. TO STEPHENVILLE X-CD d. 118.7 X-CD

Description : The minimum content of a readback of the message from ATC “X-CD CHANGE FREQUENCY TO STEPHENVILLE TOWER 118.7” is: a. 118.7 b. CHANGING FREQUENCY X-CD c. TO STEPHENVILLE X-CD d. 118.7 X-CD

Last Answer : d. 118.7 X-CD

An urgency message should include the following information: a. Name of station addressed, aircraft callsign, nature of urgency condition, intention of commander, position, level, heading b. Callsign, position, route, destination, endurance c. Name of station addressed, callsign, present positin, level, ETA destination d. Captain’s number, rank and name

Description : An urgency message should include the following information: a. Name of station addressed, aircraft callsign, nature of urgency condition, intention of commander, position, level, heading b. Callsign, ... , callsign, present positin, level, ETA destination d. Captain's number, rank and name

Last Answer : a. Name of station addressed, aircraft callsign, nature of urgency condition, intention of commander, position, level, heading

If the track on an instrument departure is published, the pilot is expected to: a. Correct for the correct wind so as to stay within controlled airspace b. Ask ATC for another heading to steer correcting for wind c. Ignore the wind and proceed with a heading equal to the track d. Ask ATC for permission to correct heading for wind

Description : If the track on an instrument departure is published, the pilot is expected to: a. Correct for the correct wind so as to stay within controlled airspace b. Ask ATC for another heading to steer ... proceed with a heading equal to the track d. Ask ATC for permission to correct heading for wind

Last Answer : a. Correct for the correct wind so as to stay within controlled airspace

The phrase “BRAKING CO-EFFICIENT 20” from ATC means that the braking action is:

Description : The phrase “BRAKING CO-EFFICIENT 20” from ATC means that the braking action is:

Last Answer : poor

The phrase “BRAKING CO-EFFICIENT 20” from ATC means that braking action: a. Poor b. Medium to poor c. Medium d. Slippery

Description : The phrase “BRAKING CO-EFFICIENT 20” from ATC means that braking action: a. Poor b. Medium to poor c. Medium d. Slippery

Last Answer : a. Poor

When an aircraft subjected to unlawful interference has landed in a Contracting State, it shall notify by the most expeditious means of the State of Registry and the State of the Operator of the landing and, in addition, shall similarly transmit all other relevant information to: a. Each State whose citizens suffered fatalities or injuries, each State whose citizens were detained as hostages, each State whose citizens were known to be on board and ICAO b. ICAO only c. Each State whose citizens were known to be on board only d. ICAO and each State whose citizens were known to be on board only

Description : When an aircraft subjected to unlawful interference has landed in a Contracting State, it shall notify by the most expeditious means of the State of Registry and the State of the Operator of the landing and, ... be on board only d. ICAO and each State whose citizens were known to be on board only

Last Answer : a. Each State whose citizens suffered fatalities or injuries, each State whose citizens were detained as hostages, each State whose citizens were known to be on board and ICAO

A controlled flight is required to inform the concerned ATC unit when the average TAS at cruising level deviates or is expected to deviate compared to that given TAS in the Flight Plan by at least plus or minus: a. 10% b. 3% c. 5% d. 2%

Description : A controlled flight is required to inform the concerned ATC unit when the average TAS at cruising level deviates or is expected to deviate compared to that given TAS in the Flight Plan by at least plus or minus: a. 10% b. 3% c. 5% d. 2%

Last Answer : d. 2%

In the event of an act of unlawful interference, which of the following is the correct procedure to be taken by the pilot in command? a. Squawk 7700 if the situation requires and continue the flight as per the ATC clearance received if possible b. Squawk 7500 and broadcast a warning to ATC other traffic on 121.500MHz or the frequency in use whilst maintaining the flight as cleared c. Squawk 7500 (or 7700 if required) and broadcast a warning if the situation forces deviation from the cleared flight plan d. If forced to deviate from the flight plan, climb or descend to altitudes that differ from the normal cruising altitudes by 1000ft

Description : In the event of an act of unlawful interference, which of the following is the correct procedure to be taken by the pilot in command? a. Squawk 7700 if the situation requires and continue ... the flight plan, climb or descend to altitudes that differ from the normal cruising altitudes by 1000ft

Last Answer : c. Squawk 7500 (or 7700 if required) and broadcast a warning if the situation forces deviation from the cleared flight plan

An aircraft is travelling at 120 kts, what angle of bank would be required for a rate 1(one) turn? a. 30° b. 12° c. 18° d. 35°

Description : An aircraft is travelling at 120 kts, what angle of bank would be required for a rate 1(one) turn? a. 30° b. 12° c. 18° d. 35°

Last Answer : c. 18°

ATC will only report wind as gusting if: a. Gust speed exceeds mean speed by >15kts b. Gusts to over 25kts c. Gusts exceed mean speed by 10kts d. Gusts to under 25kts

Description : ATC will only report wind as gusting if:  a. Gust speed exceeds mean speed by >15kts  b. Gusts to over 25kts  c. Gusts exceed mean speed by 10kts  d. Gusts to under 25kts

Last Answer : c. Gusts exceed mean speed by 10kts 

You make a diversion from the route given in the flight plan and land at an uncontrolled airfield. Within what time after landing should you inform ATC? a. 10 mins b. 20 mins c. 30 mins d. 45 mins

Description : You make a diversion from the route given in the flight plan and land at an uncontrolled airfield. Within what time after landing should you inform ATC? a. 10 mins b. 20 mins c. 30 mins d. 45 mins

Last Answer : c. 30 mins

Your action in response to the instruction from ATC to “RESET SQUAWK” is to

Description : Your action in response to the instruction from ATC to “RESET SQUAWK” is to

Last Answer : reselect the numbers on the control unit

How does ATC report RVR?

Description : How does ATC report RVR?

Last Answer : In meters at touchdown, mid-point and stop-end of runway

The frequency on which ATIS can be found is: a. Discrete VHF or VOR frequency b. Discrete VHF only c. VOR frequency only d. Any ATC frequency

Description : The frequency on which ATIS can be found is: a. Discrete VHF or VOR frequency b. Discrete VHF only c. VOR frequency only d. Any ATC frequency

Last Answer : a. Discrete VHF or VOR frequency

. If a transponder is unserviceable before an IFR departure, then the pilot: a. Has to cancel the flight b. May proceed with the flight with ATC permission c. Has to fly low level only d. Should fly for another company

Description : . If a transponder is unserviceable before an IFR departure, then the pilot: a. Has to cancel the flight b. May proceed with the flight with ATC permission c. Has to fly low level only d. Should fly for another company

Last Answer : b. May proceed with the flight with ATC permission

f an ATC clearance is not suitable, the PIC may: a. Offer ATC an acceptable clearance b. Request and if practicable accept an amended clearance c. Demand an alternative clearance and ATC must comply d. Decline the clearance on the grounds that it is not in accordance with the field flight plan

Description : f an ATC clearance is not suitable, the PIC may: a. Offer ATC an acceptable clearance b. Request and if practicable accept an amended clearance c. Demand an alternative clearance and ATC must comply d. Decline the clearance on the grounds that it is not in accordance with the field flight plan

Last Answer : b. Request and if practicable accept an amended clearance

Pilots are not allowed to use the indent function on their SSR, unless: a. They operate outside controlled airspace b. If asked by ATC c. Within controlled airspace d. They operate a transponder with mode C

Description : Pilots are not allowed to use the indent function on their SSR, unless: a. They operate outside controlled airspace b. If asked by ATC c. Within controlled airspace d. They operate a transponder with mode C

Last Answer : b. If asked by ATC

When the Captain cannot comply with an ATC clearance: a. The Captain must accept the ATC clearance, because it is based on a filed flight plan b. He/she may request an amended clearance and, if executable, he/she will accept that clearance c. He/she may ask a new clearance and the appropriate ATC must grant him/her that clearance d. He/she may suggest a new clearance to ATC

Description : When the Captain cannot comply with an ATC clearance: a. The Captain must accept the ATC clearance, because it is based on a filed flight plan b. He/she may request an amended clearance and, if ... appropriate ATC must grant him/her that clearance d. He/she may suggest a new clearance to ATC

Last Answer : b. He/she may request an amended clearance and, if executable, he/she will accept that clearance

Except when cleared by an ATC unit, a VFR flight cannot enter or leave a Control Zone when the cloud base is lower than: a. 1000 feet and less than 8km visibility b. 2000 feet and less than 5km visibility c. 1500 feet or less than 5km visibility d. 1000 feet and less than 5km visibility

Description : Except when cleared by an ATC unit, a VFR flight cannot enter or leave a Control Zone when the cloud base is lower than: a. 1000 feet and less than 8km visibility b. 2000 feet and less than 5km visibility c. 1500 feet or less than 5km visibility d. 1000 feet and less than 5km visibility

Last Answer : c. 1500 feet or less than 5km visibility

The response to general call from ATC is for the aircraft to: a. Respond in alphabetic order b. Respond in numerical order c. Give no response d. Request a repeat of the message

Description : The response to general call from ATC is for the aircraft to: a. Respond in alphabetic order b. Respond in numerical order c. Give no response d. Request a repeat of the message

Last Answer : c. Give no response

The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Description : The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Last Answer : c. Normal ATC is resumed after an emergency

What are the key points of a good briefing? a. Individual, understood and simple b. Individual, clear and simple c. Individual, understood and short d. Simple, clear, understood and individual

Description : What are the key points of a good briefing? a. Individual, understood and simple b. Individual, clear and simple c. Individual, understood and short d. Simple, clear, understood and individual

Last Answer : c. Individual, understood and short

The correct reply to the instruction “HOLD SHORT AT RUNWAY” is: a. WILCO b. ROGER c. HOLDING SHORT d. UNDERSTOOD

Description : The correct reply to the instruction “HOLD SHORT AT RUNWAY” is: a. WILCO b. ROGER c. HOLDING SHORT d. UNDERSTOOD

Last Answer : c. HOLDING SHORT

The message “READABILITY 3’’ means

Description : The message “READABILITY 3’’ means

Last Answer : readable but with diffuculty

The message “READABILITY 3” means: a. Readable now and then b. Unreadable c. Readable d. Readable but with difficulty

Description : The message “READABILITY 3” means: a. Readable now and then b. Unreadable c. Readable d. Readable but with difficulty

Last Answer : d. Readable but with difficulty

A precision Approach Procedure is defined as: a. An approach using bearing, elevation and distance information b. An approach with a crew of at least 2 pilots trained for such operations c. An instrument approach procedure utilizing azimuth and glide path information provided by an ILS or a PAR d. An approach using bearing, elevation, and, optionally, distance information

Description : A precision Approach Procedure is defined as: a. An approach using bearing, elevation and distance information b. An approach with a crew of at least 2 pilots trained for such operations c. An ... by an ILS or a PAR d. An approach using bearing, elevation, and, optionally, distance information

Last Answer : c. An instrument approach procedure utilizing azimuth and glide path information provided by an ILS or a PAR

At aircraft taxing speed at 10mph the antiskid braking system is

Description : At aircraft taxing speed at 10mph the antiskid braking system is

Last Answer : A. inoperative

At an aircraft taxiing speed of 10mph, the anti-skid braking system is: a. Inoperative b. Operative c. Operative only on the nosewheel brakes d. Operative only on the main wheel brakes

Description : At an aircraft taxiing speed of 10mph, the anti-skid braking system is: a. Inoperative b. Operative c. Operative only on the nosewheel brakes d. Operative only on the main wheel brakes

Last Answer : a. Inoperative

The instruction “ORBIT” from ATC means that the aircraft should: a. Carry out a go around b. Continue with 360 degree turns c. Carry out one 360 degree turn only d. Reverse the direction of the turn

Description : The instruction “ORBIT” from ATC means that the aircraft should: a. Carry out a go around b. Continue with 360 degree turns c. Carry out one 360 degree turn only d. Reverse the direction of the turn

Last Answer : c. Carry out one 360 degree turn only

An urgency message should include the following information:

Description : An urgency message should include the following information:

Last Answer : name of station addressed, aircraft callsign, nature of urgency condition, intention of commander, position, level, heading

At a fuel check you have 60 US gallons (USG) of useable fuel remaining. Alternative fuel required is 12 USG. The flight time remaining is 1 hour 35 mins. What is the highest consumption rate acceptable?

Description : At a fuel check you have 60 US gallons (USG) of useable fuel remaining. Alternative fuel required is 12 USG. The flight time remaining is 1 hour 35 mins. What is the highest consumption rate acceptable?

Last Answer : 30.3 USG/HR

At a fuel check you have 60 US gallons (USG) of usable fuel remaining. Alternative fuel required is 12USG. The flight time remaining is 1 hour 35 mins. What is the highest consumption rate acceptable? a. 33.0 USG/Hr b. 37.9 USG/Hr c. 30.3 USG/Hr d. 21.3 USG/Hr

Description : At a fuel check you have 60 US gallons (USG) of usable fuel remaining. Alternative fuel required is 12USG. The flight time remaining is 1 hour 35 mins. What is the highest consumption rate acceptable? a. 33.0 USG/Hr b. 37.9 USG/Hr c. 30.3 USG/Hr d. 21.3 USG/Hr

Last Answer : c. 30.3 USG/Hr

You're 36,000 ft. above earth and a hole erupts in the fuselage of the aircraft you are in. What are your thoughts and what would you do?

Description : You're 36,000 ft. above earth and a hole erupts in the fuselage of the aircraft you are in. What are your thoughts and what would you do?

Last Answer : I am not very religious but I think I would pray.

Aircraft Carrier

Description : Aircraft Carrier

Last Answer : An aircraft carrier gets about 6 inches per gallon of fuel.