At a fuel check you have 60 US gallons (USG) of useable fuel remaining. Alternative fuel required is 12 USG. The flight time remaining is 1 hour 35 mins. What is the highest consumption rate acceptable?

At a fuel check you have 60 US gallons (USG) of useable fuel remaining. Alternative fuel required is
12 USG. The flight time remaining is 1 hour 35 mins. What is the highest consumption rate acceptable?
by

1 Answer

Answer :

30.3 USG/HR
by

Related questions

At a fuel check you have 60 US gallons (USG) of usable fuel remaining. Alternative fuel required is 12USG. The flight time remaining is 1 hour 35 mins. What is the highest consumption rate acceptable? a. 33.0 USG/Hr b. 37.9 USG/Hr c. 30.3 USG/Hr d. 21.3 USG/Hr

Description : At a fuel check you have 60 US gallons (USG) of usable fuel remaining. Alternative fuel required is 12USG. The flight time remaining is 1 hour 35 mins. What is the highest consumption rate acceptable? a. 33.0 USG/Hr b. 37.9 USG/Hr c. 30.3 USG/Hr d. 21.3 USG/Hr

Last Answer : c. 30.3 USG/Hr

At a fuel check you have 60 US gallons (USG) of usable fuel remaining. Alternative fuel required is 12USG. The flight time remaining is 1 hour 35 mins. What is the highest consumption rate acceptable? a. 33.0 USG/Hr b. 37.9 USG/Hr c. 30.3 USG/Hr d. 21.3 USG/Hr

Description : At a fuel check you have 60 US gallons (USG) of usable fuel remaining. Alternative fuel required is 12USG. The flight time remaining is 1 hour 35 mins. What is the highest consumption rate acceptable? a. 33.0 USG/Hr b. 37.9 USG/Hr c. 30.3 USG/Hr d. 21.3 USG/Hr

Last Answer : c. 30.3 USG/Hr

f an ATC clearance is not suitable, the PIC may: a. Offer ATC an acceptable clearance b. Request and if practicable accept an amended clearance c. Demand an alternative clearance and ATC must comply d. Decline the clearance on the grounds that it is not in accordance with the field flight plan

Description : f an ATC clearance is not suitable, the PIC may: a. Offer ATC an acceptable clearance b. Request and if practicable accept an amended clearance c. Demand an alternative clearance and ATC must comply d. Decline the clearance on the grounds that it is not in accordance with the field flight plan

Last Answer : b. Request and if practicable accept an amended clearance

Maximum endurance: a. Can be achieved in level unaccelerated flight with minimum fuel consumption b. Can be achieved by flying at the best rate of climb speed in straight and level flight c. Can be achieved in a steady climb d. Can be achieved by flying at the absolute ceiling

Description : Maximum endurance: a. Can be achieved in level unaccelerated flight with minimum fuel consumption b. Can be achieved by flying at the best rate of climb speed in straight and level flight c. Can be achieved in a steady climb d. Can be achieved by flying at the absolute ceiling

Last Answer : a. Can be achieved in level unaccelerated flight with minimum fuel consumption

What is the Total Elapsed Time on a VFR flight plan? a. From take-off to overhead destination b. From take-off to overhead destination + 15 mins c. From take-off to landing d. From taxi to arrival on the gate

Description : What is the Total Elapsed Time on a VFR flight plan? a. From take-off to overhead destination b. From take-off to overhead destination + 15 mins c. From take-off to landing d. From taxi to arrival on the gate

Last Answer : a. From take-off to overhead destination

You make a diversion from the route given in the flight plan and land at an uncontrolled airfield. Within what time after landing should you inform ATC? a. 10 mins b. 20 mins c. 30 mins d. 45 mins

Description : You make a diversion from the route given in the flight plan and land at an uncontrolled airfield. Within what time after landing should you inform ATC? a. 10 mins b. 20 mins c. 30 mins d. 45 mins

Last Answer : c. 30 mins

A flight is planned from L to M, distance 850 nm. Wind component out is 35 kt(TWC), TAS 450kt. Mean fuel flow out is 2500kg/hr, mean fuel flow inbound is 1900kg/hr and the fuel available is 6000kg. The time and distance to PSR is: a. 1hr 30 min, 660nm b. 1hr 30 min, 616nm c. 1hr 15 min, 606nm d. 1hr 16 min, 616nm

Description : A flight is planned from L to M, distance 850 nm. Wind component out is 35 kt(TWC), TAS 450kt. Mean fuel flow out is 2500kg/hr, mean fuel flow inbound is 1900kg/hr and the fuel available is 6000kg. The time ... 1hr 30 min, 660nm b. 1hr 30 min, 616nm c. 1hr 15 min, 606nm d. 1hr 16 min, 616nm

Last Answer : d. 1hr 16 min, 616nm

When does the engine High Pressure fuel shut off valve close? a. After a booster pump failure b. When the engine fuel switch is selected ‘ON’ during engine start c. When flight idle is selected d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Description : When does the engine High Pressure fuel shut off valve close? a. After a booster pump failure b. When the engine fuel switch is selected ‘ON’ during engine start c. When flight idle is selected d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Last Answer : d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

For a controlled flight before departure, a flight plan must be filed at least: a. 50 minutes before off-block time b. 60 minutes before departure c. 10 minutes before departure d. 30 minutes before off-block time

Description : For a controlled flight before departure, a flight plan must be filed at least: a. 50 minutes before off-block time b. 60 minutes before departure c. 10 minutes before departure d. 30 minutes before off-block time

Last Answer : b. 60 minutes before departure

Given: DOM 33,510kt; Traffic load 7,600kg; Trip fuel 2040kg; Final reserve 983kg Alternative fuel 1100kg; Contingency 5% of trip fuel Which of the following is correct? a. Estimated landing mass at destination 43,193kg b. Estimated landing mass at destination 43,295kg c. Estimated take-off mass 43,295kg d. Estimated take-off mass 45,233kg

Description : Given: DOM 33,510kt; Traffic load 7,600kg; Trip fuel 2040kg; Final reserve 983kg Alternative fuel 1100kg; Contingency 5% of trip fuel Which of the following is correct? a. Estimated landing mass ... destination 43,295kg c. Estimated take-off mass 43,295kg d. Estimated take-off mass 45,233kg

Last Answer : b. Estimated landing mass at destination 43,295kg

How is fuel consumption affected by the C of G position, in terms of ANM/kg?

Description : How is fuel consumption affected by the C of G position, in terms of ANM/kg?

Last Answer : decreases with a forward C of G

How is fuel consumption affect by the C of G position, in terms of ANM/kg? a. Increases with a forward C of G b. Decreases with an aft C of G c. Decreases with a forward C of G d. Fuel consumption is not affected by the C of G position

Description : How is fuel consumption affect by the C of G position, in terms of ANM/kg? a. Increases with a forward C of G b. Decreases with an aft C of G c. Decreases with a forward C of G d. Fuel consumption is not affected by the C of G position

Last Answer : c. Decreases with a forward C of G

How do you calculate the lowest usable flight level? a. Lowest QNH and lowest negative temperature below ISA b. Lowest QNH and highest negative temperature below ISA c. Highest QNH and highest temperature above ISA d. Highest QNH and lowest temperature

Description : How do you calculate the lowest usable flight level? a. Lowest QNH and lowest negative temperature below ISA b. Lowest QNH and highest negative temperature below ISA c. Highest QNH and highest temperature above ISA d. Highest QNH and lowest temperature

Last Answer : a. Lowest QNH and lowest negative temperature below ISA

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

Given: True track 215; mountain elevation 11,600 ft; local airfield gives qnh as 1035 mb; Required terrain clearance 1500 ft; temparute ISA-15C Which of the following is the minimum flight level considering the temperature?

Description : Given: True track 215; mountain elevation 11,600 ft; local airfield gives qnh as 1035 mb; Required terrain clearance 1500 ft; temparute ISA-15C Which of the following is the minimum flight level considering the temperature?

Last Answer : FL140

Given: True track 215; mountain elevation 11,600ft; local airfield gives QNH as 1035mb; required terrain clearance 1500ft; temperature ISA -15C. Which of the following is the minimum flight level considering the temperature? a. FL150 b. FL140 c. FL120 d. FL110

Description : Given: True track 215; mountain elevation 11,600ft; local airfield gives QNH as 1035mb; required terrain clearance 1500ft; temperature ISA -15C. Which of the following is the minimum flight level considering the temperature? a. FL150 b. FL140 c. FL120 d. FL110

Last Answer : b. FL140

What minimum ground visibility is required to enable a SVFR flight to take off from an aerodrome in a CTR? a. 1000m b. 1500m c. 2000m d. 3000m

Description : What minimum ground visibility is required to enable a SVFR flight to take off from an aerodrome in a CTR? a. 1000m b. 1500m c. 2000m d. 3000m

Last Answer : b. 1500m

What is required for an IFR flight in advisory airspace? a. No flight plan required b. Flight plan required and PIC must notify of any changes regardless if wanting advisory service or not c. Flight plan required but PIC need not notify of any changes d. A flight plan is only required if advisory service is required

Description : What is required for an IFR flight in advisory airspace? a. No flight plan required b. Flight plan required and PIC must notify of any changes regardless if wanting advisory service or not c. ... need not notify of any changes d. A flight plan is only required if advisory service is required

Last Answer : b. Flight plan required and PIC must notify of any changes regardless if wanting advisory service or not

A controlled flight is required to inform the concerned ATC unit when the average TAS at cruising level deviates or is expected to deviate compared to that given TAS in the Flight Plan by at least plus or minus: a. 10% b. 3% c. 5% d. 2%

Description : A controlled flight is required to inform the concerned ATC unit when the average TAS at cruising level deviates or is expected to deviate compared to that given TAS in the Flight Plan by at least plus or minus: a. 10% b. 3% c. 5% d. 2%

Last Answer : d. 2%

The specific fuel consumption per BHP hour for petrol engine is approximately a. 0.1 kg b. 0.2 kg c. 0.25 kg d. 0.35 kg

Description : The specific fuel consumption per BHP hour for petrol engine is approximately a. 0.1 kg b. 0.2 kg c. 0.25 kg d. 0.35 kg

Last Answer : ANSWER c. 0.25 kg

Refer to CAP697 MRJT1 Fig. 4.3.6 Given: Distance to alternate 400nm Landing mass at alternate 50,000kg Headwind component 25kt The alternate fuel required is: a. 2550kg b. 2800kg c. 2900kg d. 2650kg

Description : Refer to CAP697 MRJT1 Fig. 4.3.6 Given: Distance to alternate 400nm Landing mass at alternate 50,000kg Headwind component 25kt The alternate fuel required is: a. 2550kg b. 2800kg c. 2900kg d. 2650kg

Last Answer : b. 2800kg

The message “CHECK” to an aircraft means that you should: a. Confirm that you received and understood the last message b. Pass the required information to ATC c. Stay where you are d. Examine a system or procedure

Description : The message “CHECK” to an aircraft means that you should: a. Confirm that you received and understood the last message b. Pass the required information to ATC c. Stay where you are d. Examine a system or procedure

Last Answer : d. Examine a system or procedure

Two taps can fill a bunker in 40 and 48 mins respectively and a waste tap can empty 6 gallons per minute. All the 3 taps working together can fill the bunker in 30 mind. The capacity of the bunker is. A) 480 B) 480 C) 680 D) 780

Description : Two taps can fill a bunker in 40 and 48 mins respectively and a waste tap can empty 6 gallons per minute. All the 3 taps working together can fill the bunker in 30 mind. The capacity of the bunker is. A) 480 B) 480 C) 680 D) 780 

Last Answer : A Work done by the waste tap in 1 min = 1/30 – (1/40 + 1/48) = 8 – (6+5)/240 = 8-11/240 = -3/240 = -1/80 (negative sign means emptying) Volume of 1/80 part = 60 gallons Volume of whole = (6*80) = 480 gallons

For a flight plan filed before flight, the indicated time of departure is:

Description : For a flight plan filed before flight, the indicated time of departure is:

Last Answer : the estimated off-block time

If a pilot lands at an aerodrome other than the destination aerodrome specified in the ICAO flight plan, she must ensure that the ATS unit at the destination is informed within a specified time of her planned ETA at destination. The time is:

Description : If a pilot lands at an aerodrome other than the destination aerodrome specified in the ICAO flight plan, she must ensure that the ATS unit at the destination is informed within a specified time of her planned ETA at destination. The time is:

Last Answer : 30 mins

When submitting a flight plan before flight, departure time is?

Description : When submitting a flight plan before flight, departure time is?

Last Answer : at which the aircraft leaves the parking area

How many hours in advance of departure time should a flight plan be filed in the case of flights into areas subject to air traffic flow management (ATFM)? a. 3.00 hrs b. 0.30 hrs c. 1.00 hr d. 0.10 hr

Description : How many hours in advance of departure time should a flight plan be filed in the case of flights into areas subject to air traffic flow management (ATFM)? a. 3.00 hrs b. 0.30 hrs c. 1.00 hr d. 0.10 hr

Last Answer : a. 3.00 hrs

What cannot be left out from a position report? a. Callsign, Flight Level and Time b. Callsign, Position and Time c. Position, Time, Flight Level, Next position and ETA d. Your signature

Description : What cannot be left out from a position report? a. Callsign, Flight Level and Time b. Callsign, Position and Time c. Position, Time, Flight Level, Next position and ETA d. Your signature

Last Answer : b. Callsign, Position and Time

Clearance limit is defined as: a. The flight level to which an aircraft is granted ATC clearance b. The time at which the ATC clearance expires c. The point to which aircraft is granted ATC clearance d. The height below which you will hit the first obstacle

Description : Clearance limit is defined as: a. The flight level to which an aircraft is granted ATC clearance b. The time at which the ATC clearance expires c. The point to which aircraft is granted ATC clearance d. The height below which you will hit the first obstacle

Last Answer : c. The point to which aircraft is granted ATC clearance

If an ATC clearance is not suitable, the PIC may: a. Offer ATC an acceptable clearance b. Request and if practicable accept an amended clearance c. Demand an alternative clearance and ATC must comply d. Decline the clearance on the grounds that it is not in accordance with the field flight plan

Description : If an ATC clearance is not suitable, the PIC may: a. Offer ATC an acceptable clearance b. Request and if practicable accept an amended clearance c. Demand an alternative clearance and ATC must ... d. Decline the clearance on the grounds that it is not in accordance with the field flight plan

Last Answer : b. Request and if practicable accept an amended clearance

From a pre-flight briefing you know a jet stream is at 31,000ft whilst you are at FL270. You experience moderate CAT. What would be the best course of action? a. Stay level b. Descend c. Climb d. Reduce speed

Description : From a pre-flight briefing you know a jet stream is at 31,000ft whilst you are at FL270. You  experience moderate CAT. What would be the best course of action?  a. Stay level  b. Descend  c. Climb  d. Reduce speed

Last Answer : b. Descend 

A flight is to depart from an airport with runway 09 and 27. Surface wind is 270/05; an inversion is reported at 300 feet with turbulence and wind shear. The wind just above the inversion is 090/30. What is the safest departure procedure? a. Take-off is not possible under these conditions b. Depart on runway 09 with a tailwind c. Depart runway 27 with maximum throttle during the passage through the inversion d. Depart runway 27 with as steep an ascent as possible

Description : A flight is to depart from an airport with runway 09 and 27. Surface wind is 270/05; an  inversion is reported at 300 feet with turbulence and wind shear. The wind just above the  ... throttle during the passage through the inversion  d. Depart runway 27 with as steep an ascent as possible

Last Answer : b. Depart on runway 09 with a tailwind

The isobars drawn on a surface weather chart represent lines of equal pressure: a. At flight level b. At height of observatory c. At a determined density altitude d. Reduced to sea level

Description : The isobars drawn on a surface weather chart represent lines of equal pressure:  a. At flight level  b. At height of observatory  c. At a determined density altitude  d. Reduced to sea level

Last Answer : d. Reduced to sea level

What is normally the most effective measure to reduce or avoid CAT effects? a. Change of flight level b. Change of course c. Increase of speed d. Decrease of speed

Description : What is normally the most effective measure to reduce or avoid CAT effects?  a. Change of flight level  b. Change of course  c. Increase of speed  d. Decrease of speed

Last Answer : a. Change of flight level

During general briefing at the pre-flight stage, the captain should emphasize the

Description : During general briefing at the pre-flight stage, the captain should emphasize the

Last Answer : importance of crew coordination

If having tried all normal methods, the ears cannot be cleared in flight, the ff. action should be taken

Description : If having tried all normal methods, the ears cannot be cleared in flight, the ff. action should be taken

Last Answer : seek medical advice as soon as possible

If, having tried all normal methods, the ears cannot be cleared in flight, the following action should be taken: a. Ignore and it will go away b. Descend to 10,000ft or MSA – whichever is higher c. Seek medical advice as soon as possible d. Descend as quickly as possible to minimize pain

Description : If, having tried all normal methods, the ears cannot be cleared in flight, the following action should be taken: a. Ignore and it will go away b. Descend to 10,000ft or MSA – whichever is higher c. Seek medical advice as soon as possible d. Descend as quickly as possible to minimize pain

Last Answer : c. Seek medical advice as soon as possible

A pilot suffering from decompression sickness should: a. Descend to a lower level where the symptoms will disappear and continue the flight at this or a lower level b. Decrease the cabin pressure to relieve the symptoms c. Continue the flight at a lower altitude and carry out exercises to relieve the pain in the affected site d. Land as soon as possible and seek medical assistance

Description : A pilot suffering from decompression sickness should: a. Descend to a lower level where the symptoms will disappear and continue the flight at this or a lower level b. Decrease the cabin pressure ... relieve the pain in the affected site d. Land as soon as possible and seek medical assistance

Last Answer : d. Land as soon as possible and seek medical assistance

During a general briefing at the pre-flight stage, the captain should emphasize: a. The complete delegation of all duties b. The importance of crew coordination c. The priority of departing on schedule d. The avoidance of inadequate handling of controls

Description : During a general briefing at the pre-flight stage, the captain should emphasize: a. The complete delegation of all duties b. The importance of crew coordination c. The priority of departing on schedule d. The avoidance of inadequate handling of controls

Last Answer : b. The importance of crew coordination

The first segment of the take-off flight path ends:

Description : The first segment of the take-off flight path ends:

Last Answer : at completion of gear retraction

In flight, it is possible to: i. File an IFR flight plan ii. Modify an active flight plan iii. Cancel a VFR flight plan iv. Close a VFR flight plan (rules of the air ann2 3.3.5) a. i and ii b. i, ii, iii and iv c. ii, iii and iv d. i and iv

Description : In flight, it is possible to: i. File an IFR flight plan ii. Modify an active flight plan iii. Cancel a VFR flight plan iv. Close a VFR flight plan (rules of the air ann2 3.3.5) a. i and ii b. i, ii, iii and iv c. ii, iii and iv d. i and iv

Last Answer : b. i, ii, iii and iv

Which of the following would give the greatest gliding performance? a. Flight at VMD b. Flight at 1.32VMD c. Flight at the best CL/CD ratio d. Flight close to CL MAX

Description : Which of the following would give the greatest gliding performance? a. Flight at VMD b. Flight at 1.32VMD c. Flight at the best CL/CD ratio d. Flight close to CL MAX

Last Answer : d. Flight close to CL MAX

Your reply to the message “REPORT FLIGHT CONDITONS” should be

Description : Your reply to the message “REPORT FLIGHT CONDITONS” should be

Last Answer : VMC/IMC

Your reply to the message “REPORT FLIGHT CONDITIONS” should be: a. VFR/IFR b. SMOOTH/TURBULENT c. NOT BAD/SO SO d. VMC/IMC

Description : Your reply to the message “REPORT FLIGHT CONDITIONS” should be: a. VFR/IFR b. SMOOTH/TURBULENT c. NOT BAD/SO SO d. VMC/IMC

Last Answer : d. VMC/IMC

. If a transponder is unserviceable before an IFR departure, then the pilot: a. Has to cancel the flight b. May proceed with the flight with ATC permission c. Has to fly low level only d. Should fly for another company

Description : . If a transponder is unserviceable before an IFR departure, then the pilot: a. Has to cancel the flight b. May proceed with the flight with ATC permission c. Has to fly low level only d. Should fly for another company

Last Answer : b. May proceed with the flight with ATC permission

no ICAO identifier has been attributed to an aerodrome, what should be entered in Box 16 of the Flight Plan? a. ZZZZ

Description : no ICAO identifier has been attributed to an aerodrome, what should be entered in Box 16 of the Flight Plan? a. ZZZZ b. NNNN c. A/N d. A/D XXX

Last Answer : a. ZZZZ

The transition of altitude to flight level and vice versa is made: a. On the transition level in the climb and transition altitude in the descent b. At the transition altitude in the climb and transition level in the descent c. At the transition level only d. At the transition altitude only

Description : The transition of altitude to flight level and vice versa is made: a. On the transition level in the climb and transition altitude in the descent b. At the transition altitude in the climb and transition level in the descent c. At the transition level only d. At the transition altitude only

Last Answer : b. At the transition altitude in the climb and transition level in the descent

Which of the following is an obligation of being an ICAO contracting state? a. ICAO must be informed about all new flight crew licenses and any suspended validity of such licenses b. ICAO must be informed about differences from the standards detailed in any of the annexes to the Chicago convention c. ICAO must approve the pricing of tickets on international airline connections d. ICAO must be informed about changes to national regulations

Description : Which of the following is an obligation of being an ICAO contracting state? a. ICAO must be informed about all new flight crew licenses and any suspended validity of such licenses ... of tickets on international airline connections d. ICAO must be informed about changes to national regulations

Last Answer : b. ICAO must be informed about differences from the standards detailed in any of the annexes to the Chicago convention

The person having overall responsibility of an aircraft during flight is the: a. Pilot in command b. Operator c. ATC controller if the aircraft is in controlled airspace d. Owner of the aircraft

Description : The person having overall responsibility of an aircraft during flight is the: a. Pilot in command b. Operator c. ATC controller if the aircraft is in controlled airspace d. Owner of the aircraft

Last Answer : a. Pilot in command

If so equipped, when should an aircraft display the anti-collision light? a. Only at night in flight, but not on the ground if being towed b. Whilst taxiing but not whilst being towed c. Only at night with engines running d. At all times on the ground when the engines are running

Description : If so equipped, when should an aircraft display the anti-collision light? a. Only at night in flight, but not on the ground if being towed b. Whilst taxiing but not whilst being towed c. Only at night with engines running d. At all times on the ground when the engines are running

Last Answer : d. At all times on the ground when the engines are running