The message “READABILITY 3” means: a. Readable now and then b. Unreadable c. Readable d. Readable but with difficulty

The message “READABILITY 3” means:
a. Readable now and then
b. Unreadable
c. Readable
d. Readable but with difficulty
by

1 Answer

Answer :

d. Readable but with difficulty
by

Related questions

The message “READABILITY 3” means: a. Readable now and then b. Unreadable c. Readable d. Readable but with difficulty

Description : The message “READABILITY 3” means: a. Readable now and then b. Unreadable c. Readable d. Readable but with difficulty

Last Answer : d. Readable but with difficulty

Readability 2 means that your transmission is: a. Readable but with difficulty b. Readable c. Readable now and then d. Two way communications have been established

Description : Readability 2 means that your transmission is: a. Readable but with difficulty b. Readable c. Readable now and then d. Two way communications have been established

Last Answer : c. Readable now and then

Readability 2 means that your transmission is: a. Readable but with difficulty b. Readable c. Readable now and then d. Two way communications have been established

Description : Readability 2 means that your transmission is: a. Readable but with difficulty b. Readable c. Readable now and then d. Two way communications have been established

Last Answer : c. Readable now and then

The message “READABILITY 3’’ means

Description : The message “READABILITY 3’’ means

Last Answer : readable but with diffuculty

Readability 2 means that your transmission is:

Description : Readability 2 means that your transmission is:

Last Answer : readable now and then

The message “CHECK” to an aircraft means that you would:

Description : The message “CHECK” to an aircraft means that you would:

Last Answer : examine a system or procedure

The message “CHECK” to an aircraft means that you should: a. Confirm that you received and understood the last message b. Pass the required information to ATC c. Stay where you are d. Examine a system or procedure

Description : The message “CHECK” to an aircraft means that you should: a. Confirm that you received and understood the last message b. Pass the required information to ATC c. Stay where you are d. Examine a system or procedure

Last Answer : d. Examine a system or procedure

. If you are repeating a word or a message for clarity then you should use the phrase: a. WORDS TWICE b. I REPEAT c. I SAY AGAIN d. DITTO

Description : . If you are repeating a word or a message for clarity then you should use the phrase: a. WORDS TWICE b. I REPEAT c. I SAY AGAIN d. DITTO

Last Answer : c. I SAY AGAIN

When asking for a repeat of a message, you should say:

Description : When asking for a repeat of a message, you should say:

Last Answer : SAY AGAIN

The priority of the message “LINE UP”is

Description : The priority of the message “LINE UP”is

Last Answer : same as “TAXI TO HOLDING POINT RUNWAY 20”

An urgency message should include the following information:

Description : An urgency message should include the following information:

Last Answer : name of station addressed, aircraft callsign, nature of urgency condition, intention of commander, position, level, heading

Your reply to the message “REPORT FLIGHT CONDITONS” should be

Description : Your reply to the message “REPORT FLIGHT CONDITONS” should be

Last Answer : VMC/IMC

The phrase used to separate portions of a message is:

Description : The phrase used to separate portions of a message is:

Last Answer : break

When making a blind transmission you should: a. Transmit the message twice b. Transmit each word twice c. Repeat the message on 121.5 MHz d. Wait for visual signals

Description : When making a blind transmission you should: a. Transmit the message twice b. Transmit each word twice c. Repeat the message on 121.5 MHz d. Wait for visual signals

Last Answer : a. Transmit the message twice

. The priority of the message “LINE UP” is: a. Greater than “REQUEST QDM” b. Less than “CLEAR TO LAND” c. Same as “TAXI TO HOLDING POINT RUNWAY 20” d. Same as “WORK IN PROGRESS ON TAXIWAY

Description : . The priority of the message “LINE UP” is: a. Greater than “REQUEST QDM” b. Less than “CLEAR TO LAND” c. Same as “TAXI TO HOLDING POINT RUNWAY 20” d. Same as “WORK IN PROGRESS ON TAXIWAY

Last Answer : c. Same as “TAXI TO HOLDING POINT RUNWAY 20

The definition of the phrase “STANDBY” is: a. Consider the transmission as not sent b. Proceed with your message c. Wait and I will call you d. Hold your present position

Description : The definition of the phrase “STANDBY” is: a. Consider the transmission as not sent b. Proceed with your message c. Wait and I will call you d. Hold your present position

Last Answer : c. Wait and I will call you

The minimum content of a readback of the message from ATC “X-CD CHANGE FREQUENCY TO STEPHENVILLE TOWER 118.7” is: a. 118.7 b. CHANGING FREQUENCY X-CD c. TO STEPHENVILLE X-CD d. 118.7 X-CD

Description : The minimum content of a readback of the message from ATC “X-CD CHANGE FREQUENCY TO STEPHENVILLE TOWER 118.7” is: a. 118.7 b. CHANGING FREQUENCY X-CD c. TO STEPHENVILLE X-CD d. 118.7 X-CD

Last Answer : d. 118.7 X-CD

An urgency message should include the following information: a. Name of station addressed, aircraft callsign, nature of urgency condition, intention of commander, position, level, heading b. Callsign, position, route, destination, endurance c. Name of station addressed, callsign, present positin, level, ETA destination d. Captain’s number, rank and name

Description : An urgency message should include the following information: a. Name of station addressed, aircraft callsign, nature of urgency condition, intention of commander, position, level, heading b. Callsign, ... , callsign, present positin, level, ETA destination d. Captain's number, rank and name

Last Answer : a. Name of station addressed, aircraft callsign, nature of urgency condition, intention of commander, position, level, heading

The response to general call from ATC is for the aircraft to: a. Respond in alphabetic order b. Respond in numerical order c. Give no response d. Request a repeat of the message

Description : The response to general call from ATC is for the aircraft to: a. Respond in alphabetic order b. Respond in numerical order c. Give no response d. Request a repeat of the message

Last Answer : c. Give no response

The phrase used to separate portions of a message is: a. BREAK BREAK b. I SAY AGAIN c. BREAK d. UMM

Description : The phrase used to separate portions of a message is: a. BREAK BREAK b. I SAY AGAIN c. BREAK d. UMM

Last Answer : c. BREAK

The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Description : The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Last Answer : c. Normal ATC is resumed after an emergency

Your reply to the message “REPORT FLIGHT CONDITIONS” should be: a. VFR/IFR b. SMOOTH/TURBULENT c. NOT BAD/SO SO d. VMC/IMC

Description : Your reply to the message “REPORT FLIGHT CONDITIONS” should be: a. VFR/IFR b. SMOOTH/TURBULENT c. NOT BAD/SO SO d. VMC/IMC

Last Answer : d. VMC/IMC

The term “CORRECTION” is used when: a. The readback of a message is incorrect b. The readback of a message is correct c. The message has to be deleted d. An error has been made in the transmission and the correct version isH..

Description : The term “CORRECTION” is used when: a. The readback of a message is incorrect b. The readback of a message is correct c. The message has to be deleted d. An error has been made in the transmission and the correct version isH..

Last Answer : d. An error has been made in the transmission and the correct version isH..

A DISTRESS message differs from an URGENCY message because: a. There is grave and imminent danger which requires immediate assistance b. The aeroplane has suffered damage that endangers the ability to fly c. The aeroplane will not be able to reach a suitable aerodrome d. The situation concerns the safety of passengers on board or within sight

Description : A DISTRESS message differs from an URGENCY message because: a. There is grave and imminent danger which requires immediate assistance b. The aeroplane has suffered damage that endangers the ability ... suitable aerodrome d. The situation concerns the safety of passengers on board or within sight

Last Answer : a. There is grave and imminent danger which requires immediate assistance

The code “BECMG FM 1100 –RASH” in a METAR means: a. From 1100UTC, the cessation of rain showers b. Becoming from 1100UTC slight rain showers

Description : The code “BECMG FM 1100 –RASH” in a METAR means:  a. From 1100UTC, the cessation of rain showers  b. Becoming from 1100UTC slight rain showers  c. Becoming from 1100UTC rain showers  d. Becoming from 1100UTC till 0000UTC slight rain showers

Last Answer : b. Becoming from 1100UTC slight rain showers

The instruction “ORBIT”from ATC means that the aircraft should:

Description : The instruction “ORBIT”from ATC means that the aircraft should:

Last Answer : carry out one 360 degree turn only

The term “DISREGARD” means:

Description : The term “DISREGARD” means:

Last Answer : Ignore

The phrase “BRAKING CO-EFFICIENT 20” from ATC means that the braking action is:

Description : The phrase “BRAKING CO-EFFICIENT 20” from ATC means that the braking action is:

Last Answer : poor

The instruction “ORBIT” from ATC means that the aircraft should: a. Carry out a go around b. Continue with 360 degree turns c. Carry out one 360 degree turn only d. Reverse the direction of the turn

Description : The instruction “ORBIT” from ATC means that the aircraft should: a. Carry out a go around b. Continue with 360 degree turns c. Carry out one 360 degree turn only d. Reverse the direction of the turn

Last Answer : c. Carry out one 360 degree turn only

The term “DISREGARD” means: a. Ignore b. Cancel the last clearance c. You have not been cleared d. Pay no attention to what I say

Description : The term “DISREGARD” means: a. Ignore b. Cancel the last clearance c. You have not been cleared d. Pay no attention to what I say

Last Answer : a. Ignore

The term “RECLEARED” means that: a. Your last clearance is confirmed b. Your last clearance has been cancelled c. You may proceed as you please d. A change has been made to your last clearance and this new clearance supersedes your previous clearance

Description : The term “RECLEARED” means that: a. Your last clearance is confirmed b. Your last clearance has been cancelled c. You may proceed as you please d. A change has been made to your last clearance and this new clearance supersedes your previous clearance

Last Answer : d. A change has been made to your last clearance and this new clearance supersedes your previous clearance

The phrase “BRAKING CO-EFFICIENT 20” from ATC means that braking action: a. Poor b. Medium to poor c. Medium d. Slippery

Description : The phrase “BRAKING CO-EFFICIENT 20” from ATC means that braking action: a. Poor b. Medium to poor c. Medium d. Slippery

Last Answer : a. Poor

When an aircraft subjected to unlawful interference has landed in a Contracting State, it shall notify by the most expeditious means of the State of Registry and the State of the Operator of the landing and, in addition, shall similarly transmit all other relevant information to: a. Each State whose citizens suffered fatalities or injuries, each State whose citizens were detained as hostages, each State whose citizens were known to be on board and ICAO b. ICAO only c. Each State whose citizens were known to be on board only d. ICAO and each State whose citizens were known to be on board only

Description : When an aircraft subjected to unlawful interference has landed in a Contracting State, it shall notify by the most expeditious means of the State of Registry and the State of the Operator of the landing and, ... be on board only d. ICAO and each State whose citizens were known to be on board only

Last Answer : a. Each State whose citizens suffered fatalities or injuries, each State whose citizens were detained as hostages, each State whose citizens were known to be on board and ICAO

If a CSD overheat warning is shown: a. The CSD can be disconnected and the pilot must control the alternator himself b. The pilot must throttle back to reduce the load on the alternator c. The CSD can be disconnected then reconnected later when the temperature has reduced d. The CSD can be disconnected but not used for the rest of the flight

Description : If a CSD overheat warning is shown: a. The CSD can be disconnected and the pilot must control the alternator himself b. The pilot must throttle back to reduce the load on the alternator c. The ... temperature has reduced d. The CSD can be disconnected but not used for the rest of the flight

Last Answer : d. The CSD can be disconnected but not used for the rest of the flight

Is there a way to get files off a hard drive that is seen as being unreadable?

Description : Is there a way to get files off a hard drive that is seen as being unreadable?

Last Answer : One trick would be to hook it up to a Mac. I did that once with a drive of my neighbors that died in that way. It spun up, and I was able to see everything. The reason is the Mac doesn't care about ... on the pc side. It looks at it as new info. Then you can copy it to another pc drive that works.

Why are the Japanese characters in some of my mails unreadable by certain people?

Description : Why are the Japanese characters in some of my mails unreadable by certain people?

Last Answer : answer:You should use UTF-8. I believe it is more widely supported in email clients. As for the last question, the history of the development of text encodings, their redundancy ... (in English) for Chinese, Japanese, Korean and Vietnamese encoding, typesetting technology and information processing.

The various types of instruments required during audit is not need to be…. a) Easy to carry b) Inexpensive c) Easy to operate d) Unreadable

Description : The various types of instruments required during audit is not need to be…. a) Easy to carry b) Inexpensive c) Easy to operate d) Unreadable

Last Answer : Unreadable

If a transponder is unserviceable before an IFR departure, then the pilot:

Description : If a transponder is unserviceable before an IFR departure, then the pilot:

Last Answer : may proceed with the flight with ATC permission

. If a transponder is unserviceable before an IFR departure, then the pilot: a. Has to cancel the flight b. May proceed with the flight with ATC permission c. Has to fly low level only d. Should fly for another company

Description : . If a transponder is unserviceable before an IFR departure, then the pilot: a. Has to cancel the flight b. May proceed with the flight with ATC permission c. Has to fly low level only d. Should fly for another company

Last Answer : b. May proceed with the flight with ATC permission

A marshaller crosses his/her hands in front of the face, palms outward and then moves the arms outwards. What does the signal indicate? a. Clear to move forward b. Brakes off c. Remove chocks d. Clear to close all engines

Description : A marshaller crosses his/her hands in front of the face, palms outward and then moves the arms outwards. What does the signal indicate? a. Clear to move forward b. Brakes off c. Remove chocks d. Clear to close all engines

Last Answer : c. Remove chocks

What is the absolute time a pilot should stop drinking before flying? a. 6 hours but it depends upon the amount of alcohol that has been consumed b. 24 hours but it depends upon the amount of alcoho l that has been consumed c. 12 hours but it depends upon the amount of alcohol that has been consumed d. 8 hours but it depends upon the amount of alcohol that has been consumed

Description : What is the absolute time a pilot should stop drinking before flying? a. 6 hours but it depends upon the amount of alcohol that has been consumed b. 24 hours but it depends upon the amount of ... that has been consumed d. 8 hours but it depends upon the amount of alcohol that has been consumed

Last Answer : d. 8 hours but it depends upon the amount of alcohol that has been consumed

The definition of the DISTRESS condition is that: a. There is concern for the safety of the aircraft or a person on board or other vehicle but there is no need for immediate assistance b. The aircraft is in imminent danger and requires immediate assistance c. The aircraft has crashed d. The aircraft is being hijacked

Description : The definition of the DISTRESS condition is that: a. There is concern for the safety of the aircraft or a person on board or other vehicle but there is no need for immediate assistance ... danger and requires immediate assistance c. The aircraft has crashed d. The aircraft is being hijacked

Last Answer : b. The aircraft is in imminent danger and requires immediate assistance

If so equipped, when should an aircraft display the anti-collision light? a. Only at night in flight, but not on the ground if being towed b. Whilst taxiing but not whilst being towed c. Only at night with engines running d. At all times on the ground when the engines are running

Description : If so equipped, when should an aircraft display the anti-collision light? a. Only at night in flight, but not on the ground if being towed b. Whilst taxiing but not whilst being towed c. Only at night with engines running d. At all times on the ground when the engines are running

Last Answer : d. At all times on the ground when the engines are running

What is required for an IFR flight in advisory airspace? a. No flight plan required b. Flight plan required and PIC must notify of any changes regardless if wanting advisory service or not c. Flight plan required but PIC need not notify of any changes d. A flight plan is only required if advisory service is required

Description : What is required for an IFR flight in advisory airspace? a. No flight plan required b. Flight plan required and PIC must notify of any changes regardless if wanting advisory service or not c. ... need not notify of any changes d. A flight plan is only required if advisory service is required

Last Answer : b. Flight plan required and PIC must notify of any changes regardless if wanting advisory service or not

Decreasing the leading will space the lines out, allowing for improved readability. -Technology

Description : Decreasing the leading will space the lines out, allowing for improved readability. -Technology

Last Answer : FalseIncreasing the leading will space the lines out, allowing for improved readability.

An important aspect of coding is ? Readability Productivity To use as small memory space as possible brevity

Description : An important aspect of coding is ? Readability Productivity To use as small memory space as possible brevity

Last Answer : Readability

The advantage of COM are its “ and “ a. Compact size; speed readability b. Compact size, speed c. Readability; speed d. Low cost; readability

Description : The advantage of COM are its “ and “ a. Compact size; speed readability b. Compact size, speed c. Readability; speed d. Low cost; readability

Last Answer : Compact size, speed

What will happen if white space is repeatedly used around the object? a. It will reduce the readability b. It will create a border c. It will make it more appealing by augmenting the object d. All of the above

Description : What will happen if white space is repeatedly used around the object? a. It will reduce the readability b. It will create a border c. It will make it more appealing by augmenting the object d. All of the above

Last Answer : c. It will make it more appealing by augmenting the object

Using white space around an object will: A. Waste space that could be used for marketing B. Decrease readability C. Enhance the object and draw attention to it D. Make a borde

Description : Using white space around an object will: A. Waste space that could be used for marketing B. Decrease readability C. Enhance the object and draw attention to it D. Make a borde

Last Answer : C. Enhance the object and draw attention to it

The advantage of COM are its … and … a. Compact size; speed readability b. Compact size, speed c. Readability; speed d. Low cost; readability

Description : The advantage of COM are its … and … a. Compact size; speed readability b. Compact size, speed c. Readability; speed d. Low cost; readability

Last Answer : b. Compact size, speed