The minimum content of a readback of the message from ATC “X-CD CHANGE FREQUENCY TO STEPHENVILLE TOWER 118.7” is: a. 118.7 b. CHANGING FREQUENCY X-CD c. TO STEPHENVILLE X-CD d. 118.7 X-CD

The minimum content of a readback of the message from ATC “X-CD CHANGE
FREQUENCY TO STEPHENVILLE TOWER 118.7” is:
a. 118.7
b. CHANGING FREQUENCY X-CD
c. TO STEPHENVILLE X-CD
d. 118.7 X-CD
by

1 Answer

Answer :

d. 118.7 X-CD
by

Related questions

The minimum content of a readback of the message from ATC “X-CD CHANGE FREQUENCY TO STEPHENVILLE TOWER 118.7” is: a. 118.7 b. CHANGING FREQUENCY X-CD c. TO STEPHENVILLE X-CD d. 118.7 X-CD

Description : The minimum content of a readback of the message from ATC “X-CD CHANGE FREQUENCY TO STEPHENVILLE TOWER 118.7” is: a. 118.7 b. CHANGING FREQUENCY X-CD c. TO STEPHENVILLE X-CD d. 118.7 X-CD

Last Answer : d. 118.7 X-CD

The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Description : The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Last Answer : c. Normal ATC is resumed after an emergency

The correct readback of the frequency 123.725 on 25 kHz spacing is: a. 123.725 b. 123.7 c. 12372 d. 123.72

Description : The correct readback of the frequency 123.725 on 25 kHz spacing is: a. 123.725 b. 123.7 c. 12372 d. 123.72

Last Answer : a. 123.725

The term “CORRECTION” is used when: a. The readback of a message is incorrect b. The readback of a message is correct c. The message has to be deleted d. An error has been made in the transmission and the correct version isH..

Description : The term “CORRECTION” is used when: a. The readback of a message is incorrect b. The readback of a message is correct c. The message has to be deleted d. An error has been made in the transmission and the correct version isH..

Last Answer : d. An error has been made in the transmission and the correct version isH..

The correct readback of the frequency 123.725 on 25khz spacing is:

Description : The correct readback of the frequency 123.725 on 25khz spacing is:

Last Answer : 123.725

The response to general call from ATC is for the aircraft to: a. Respond in alphabetic order b. Respond in numerical order c. Give no response d. Request a repeat of the message

Description : The response to general call from ATC is for the aircraft to: a. Respond in alphabetic order b. Respond in numerical order c. Give no response d. Request a repeat of the message

Last Answer : c. Give no response

The message “CHECK” to an aircraft means that you should: a. Confirm that you received and understood the last message b. Pass the required information to ATC c. Stay where you are d. Examine a system or procedure

Description : The message “CHECK” to an aircraft means that you should: a. Confirm that you received and understood the last message b. Pass the required information to ATC c. Stay where you are d. Examine a system or procedure

Last Answer : d. Examine a system or procedure

The frequency on which ATIS can be found is: a. Discrete VHF or VOR frequency b. Discrete VHF only c. VOR frequency only d. Any ATC frequency

Description : The frequency on which ATIS can be found is: a. Discrete VHF or VOR frequency b. Discrete VHF only c. VOR frequency only d. Any ATC frequency

Last Answer : a. Discrete VHF or VOR frequency

The full range of VHF frequencies used for communications is: a. 3 to 30 MHz b. 88 to 108 MHz c. 108.0 to 139.95 MHz d. 118.0 to 136.975 MHz

Description : The full range of VHF frequencies used for communications is: a. 3 to 30 MHz b. 88 to 108 MHz c. 108.0 to 139.95 MHz d. 118.0 to 136.975 MHz

Last Answer : d. 118.0 to 136.975 MHz

ATC will only report wind as gusting if: a. Gust speed exceeds mean speed by >15kts b. Gusts to over 25kts c. Gusts exceed mean speed by 10kts d. Gusts to under 25kts

Description : ATC will only report wind as gusting if:  a. Gust speed exceeds mean speed by >15kts  b. Gusts to over 25kts  c. Gusts exceed mean speed by 10kts  d. Gusts to under 25kts

Last Answer : c. Gusts exceed mean speed by 10kts 

You make a diversion from the route given in the flight plan and land at an uncontrolled airfield. Within what time after landing should you inform ATC? a. 10 mins b. 20 mins c. 30 mins d. 45 mins

Description : You make a diversion from the route given in the flight plan and land at an uncontrolled airfield. Within what time after landing should you inform ATC? a. 10 mins b. 20 mins c. 30 mins d. 45 mins

Last Answer : c. 30 mins

Your action in response to the instruction from ATC to “RESET SQUAWK” is to

Description : Your action in response to the instruction from ATC to “RESET SQUAWK” is to

Last Answer : reselect the numbers on the control unit

The instruction “ORBIT”from ATC means that the aircraft should:

Description : The instruction “ORBIT”from ATC means that the aircraft should:

Last Answer : carry out one 360 degree turn only

The instruction from ATC to an aircraft to abandon its take off includes the phrase:

Description : The instruction from ATC to an aircraft to abandon its take off includes the phrase:

Last Answer : STOP IMMEDIATELY

The response to general call from ATC is for the aircraft to:

Description : The response to general call from ATC is for the aircraft to:

Last Answer : give no response

How does ATC report RVR?

Description : How does ATC report RVR?

Last Answer : In meters at touchdown, mid-point and stop-end of runway

The phrase “BRAKING CO-EFFICIENT 20” from ATC means that the braking action is:

Description : The phrase “BRAKING CO-EFFICIENT 20” from ATC means that the braking action is:

Last Answer : poor

The instruction “ORBIT” from ATC means that the aircraft should: a. Carry out a go around b. Continue with 360 degree turns c. Carry out one 360 degree turn only d. Reverse the direction of the turn

Description : The instruction “ORBIT” from ATC means that the aircraft should: a. Carry out a go around b. Continue with 360 degree turns c. Carry out one 360 degree turn only d. Reverse the direction of the turn

Last Answer : c. Carry out one 360 degree turn only

The phrase “BRAKING CO-EFFICIENT 20” from ATC means that braking action: a. Poor b. Medium to poor c. Medium d. Slippery

Description : The phrase “BRAKING CO-EFFICIENT 20” from ATC means that braking action: a. Poor b. Medium to poor c. Medium d. Slippery

Last Answer : a. Poor

. If a transponder is unserviceable before an IFR departure, then the pilot: a. Has to cancel the flight b. May proceed with the flight with ATC permission c. Has to fly low level only d. Should fly for another company

Description : . If a transponder is unserviceable before an IFR departure, then the pilot: a. Has to cancel the flight b. May proceed with the flight with ATC permission c. Has to fly low level only d. Should fly for another company

Last Answer : b. May proceed with the flight with ATC permission

Clearance limit is defined as: a. The flight level to which an aircraft is granted ATC clearance b. The time at which the ATC clearance expires c. The point to which aircraft is granted ATC clearance d. The height below which you will hit the first obstacle

Description : Clearance limit is defined as: a. The flight level to which an aircraft is granted ATC clearance b. The time at which the ATC clearance expires c. The point to which aircraft is granted ATC clearance d. The height below which you will hit the first obstacle

Last Answer : c. The point to which aircraft is granted ATC clearance

f an ATC clearance is not suitable, the PIC may: a. Offer ATC an acceptable clearance b. Request and if practicable accept an amended clearance c. Demand an alternative clearance and ATC must comply d. Decline the clearance on the grounds that it is not in accordance with the field flight plan

Description : f an ATC clearance is not suitable, the PIC may: a. Offer ATC an acceptable clearance b. Request and if practicable accept an amended clearance c. Demand an alternative clearance and ATC must comply d. Decline the clearance on the grounds that it is not in accordance with the field flight plan

Last Answer : b. Request and if practicable accept an amended clearance

Aircraft A flies in VMC with an ATC clearance within a control area. Aircraft B without ATC clearance approaches at roughly the same height on a converging heading. Who has the right of way? a. Aircraft A, regardless of the direction from which B approaches b. Aircraft B, regardless of the direction from which A approaches c. Aircraft A, if B is to the right of him d. Aircraft B, if A is to the left of him

Description : Aircraft A flies in VMC with an ATC clearance within a control area. Aircraft B without ATC clearance approaches at roughly the same height on a converging heading. Who has the right of way? a. Aircraft A, regardless of ... A, if B is to the right of him d. Aircraft B, if A is to the left of him

Last Answer : d. Aircraft B, if A is to the left of him

The person having overall responsibility of an aircraft during flight is the: a. Pilot in command b. Operator c. ATC controller if the aircraft is in controlled airspace d. Owner of the aircraft

Description : The person having overall responsibility of an aircraft during flight is the: a. Pilot in command b. Operator c. ATC controller if the aircraft is in controlled airspace d. Owner of the aircraft

Last Answer : a. Pilot in command

The transition from IFR to VFR is done: a. On the Captain’s initiative b. Whenever an aircraft in VMC leaves controlled airspace c. If told by ATC d. At the clearance limit, disregarding the weather situation

Description : The transition from IFR to VFR is done: a. On the Captain’s initiative b. Whenever an aircraft in VMC leaves controlled airspace c. If told by ATC d. At the clearance limit, disregarding the weather situation

Last Answer : a. On the Captain’s initiative

When the aircraft carries serviceable Mode C transponder, the pilot shall continuously operate this mode: a. Only when directed by ATC b. Unless otherwise directed by ATC c. Only when the aircraft is flying within controlled airspace d. Regardless of ATC instructions

Description : When the aircraft carries serviceable Mode C transponder, the pilot shall continuously operate this mode: a. Only when directed by ATC b. Unless otherwise directed by ATC c. Only when the aircraft is flying within controlled airspace d. Regardless of ATC instructions

Last Answer : b. Unless otherwise directed by ATC

Pilots are not allowed to use the indent function on their SSR, unless: a. They operate outside controlled airspace b. If asked by ATC c. Within controlled airspace d. They operate a transponder with mode C

Description : Pilots are not allowed to use the indent function on their SSR, unless: a. They operate outside controlled airspace b. If asked by ATC c. Within controlled airspace d. They operate a transponder with mode C

Last Answer : b. If asked by ATC

The transition from IFR to VFR is done: a. On the Captain’s initiative b. Whenever an aircraft in VMC leaves controlled airspace c. If told by ATC d. At the clearance limit, disregarding the weather situation

Description : The transition from IFR to VFR is done: a. On the Captain’s initiative b. Whenever an aircraft in VMC leaves controlled airspace c. If told by ATC d. At the clearance limit, disregarding the weather situation

Last Answer : a. On the Captain’s initiative

When the Captain cannot comply with an ATC clearance: a. The Captain must accept the ATC clearance, because it is based on a filed flight plan b. He/she may request an amended clearance and, if executable, he/she will accept that clearance c. He/she may ask a new clearance and the appropriate ATC must grant him/her that clearance d. He/she may suggest a new clearance to ATC

Description : When the Captain cannot comply with an ATC clearance: a. The Captain must accept the ATC clearance, because it is based on a filed flight plan b. He/she may request an amended clearance and, if ... appropriate ATC must grant him/her that clearance d. He/she may suggest a new clearance to ATC

Last Answer : b. He/she may request an amended clearance and, if executable, he/she will accept that clearance

If the track on an instrument departure is published, the pilot is expected to: a. Correct for the correct wind so as to stay within controlled airspace b. Ask ATC for another heading to steer correcting for wind c. Ignore the wind and proceed with a heading equal to the track d. Ask ATC for permission to correct heading for wind

Description : If the track on an instrument departure is published, the pilot is expected to: a. Correct for the correct wind so as to stay within controlled airspace b. Ask ATC for another heading to steer ... proceed with a heading equal to the track d. Ask ATC for permission to correct heading for wind

Last Answer : a. Correct for the correct wind so as to stay within controlled airspace

A controlled flight is required to inform the concerned ATC unit when the average TAS at cruising level deviates or is expected to deviate compared to that given TAS in the Flight Plan by at least plus or minus: a. 10% b. 3% c. 5% d. 2%

Description : A controlled flight is required to inform the concerned ATC unit when the average TAS at cruising level deviates or is expected to deviate compared to that given TAS in the Flight Plan by at least plus or minus: a. 10% b. 3% c. 5% d. 2%

Last Answer : d. 2%

Except when cleared by an ATC unit, a VFR flight cannot enter or leave a Control Zone when the cloud base is lower than: a. 1000 feet and less than 8km visibility b. 2000 feet and less than 5km visibility c. 1500 feet or less than 5km visibility d. 1000 feet and less than 5km visibility

Description : Except when cleared by an ATC unit, a VFR flight cannot enter or leave a Control Zone when the cloud base is lower than: a. 1000 feet and less than 8km visibility b. 2000 feet and less than 5km visibility c. 1500 feet or less than 5km visibility d. 1000 feet and less than 5km visibility

Last Answer : c. 1500 feet or less than 5km visibility

The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Description : The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Last Answer : c. Normal ATC is resumed after an emergency

The correct readback of the frequency 123.725 on 25 kHz spacing is: a. 123.725 b. 123.7 c. 12372 d. 123.72

Description : The correct readback of the frequency 123.725 on 25 kHz spacing is: a. 123.725 b. 123.7 c. 12372 d. 123.72

Last Answer : a. 123.725

The callsign of a station controlling surface vehicles in the manoeuvring area would be: a. TOWER b. CLEARANCE c. GROUND d. APRON

Description : The callsign of a station controlling surface vehicles in the manoeuvring area would be: a. TOWER b. CLEARANCE c. GROUND d. APRON

Last Answer : c. GROUND

An aircraft flying in the visual circuit at an aerodrome sees a series of red flashes from the control tower. What does this mean? a. Do not land b. Do not land because the aerodrome is unusable c. Give way to other aircraft d. Return for landing and await clearance to land

Description : An aircraft flying in the visual circuit at an aerodrome sees a series of red flashes from the control tower. What does this mean? a. Do not land b. Do not land because the aerodrome is unusable c. Give way to other aircraft d. Return for landing and await clearance to land

Last Answer : b. Do not land because the aerodrome is unusable

The term “CORRECTION” is used when: a. The readback of a message is incorrect b. The readback of a message is correct c. The message has to be deleted d. An error has been made in the transmission and the correct version isH..

Description : The term “CORRECTION” is used when: a. The readback of a message is incorrect b. The readback of a message is correct c. The message has to be deleted d. An error has been made in the transmission and the correct version isH..

Last Answer : d. An error has been made in the transmission and the correct version isH..

Disorientation is more likely when the pilot is: 1. flying in VMC 2. frequently changing between inside and outside references 3. flying from IMC to VMC 4. approaching over still water at night a. 1, 2 & 3 only are correct b. 1, 2 & 4 only are correct c. 1, 2, 3 & 4 are correct d. 1 only is correct

Description : Disorientation is more likely when the pilot is: 1. flying in VMC 2. frequently changing between inside and outside references 3. flying from IMC to VMC 4. approaching over still water at night a. 1, 2 & 3 only ... 1, 2 & 4 only are correct c. 1, 2, 3 & 4 are correct d. 1 only is correct

Last Answer : b. 1, 2 & 4 only are correct

When would the negative differential limits be reached/exceeded? a. Rapid descent when AC descends below cabin altitude b. During ground pressure testing c. Rapid ascent when aircraft climbs d. When changing to manual operation

Description : When would the negative differential limits be reached/exceeded? a. Rapid descent when AC descends below cabin altitude b. During ground pressure testing c. Rapid ascent when aircraft climbs d. When changing to manual operation

Last Answer : a. Rapid descent when AC descends below cabin altitude

When asking for a repeat of a message, you should say:

Description : When asking for a repeat of a message, you should say:

Last Answer : SAY AGAIN

The message “READABILITY 3’’ means

Description : The message “READABILITY 3’’ means

Last Answer : readable but with diffuculty

The priority of the message “LINE UP”is

Description : The priority of the message “LINE UP”is

Last Answer : same as “TAXI TO HOLDING POINT RUNWAY 20”

The message “CHECK” to an aircraft means that you would:

Description : The message “CHECK” to an aircraft means that you would:

Last Answer : examine a system or procedure

An urgency message should include the following information:

Description : An urgency message should include the following information:

Last Answer : name of station addressed, aircraft callsign, nature of urgency condition, intention of commander, position, level, heading

Your reply to the message “REPORT FLIGHT CONDITONS” should be

Description : Your reply to the message “REPORT FLIGHT CONDITONS” should be

Last Answer : VMC/IMC

The phrase used to separate portions of a message is:

Description : The phrase used to separate portions of a message is:

Last Answer : break

When making a blind transmission you should: a. Transmit the message twice b. Transmit each word twice c. Repeat the message on 121.5 MHz d. Wait for visual signals

Description : When making a blind transmission you should: a. Transmit the message twice b. Transmit each word twice c. Repeat the message on 121.5 MHz d. Wait for visual signals

Last Answer : a. Transmit the message twice

. The priority of the message “LINE UP” is: a. Greater than “REQUEST QDM” b. Less than “CLEAR TO LAND” c. Same as “TAXI TO HOLDING POINT RUNWAY 20” d. Same as “WORK IN PROGRESS ON TAXIWAY

Description : . The priority of the message “LINE UP” is: a. Greater than “REQUEST QDM” b. Less than “CLEAR TO LAND” c. Same as “TAXI TO HOLDING POINT RUNWAY 20” d. Same as “WORK IN PROGRESS ON TAXIWAY

Last Answer : c. Same as “TAXI TO HOLDING POINT RUNWAY 20

The definition of the phrase “STANDBY” is: a. Consider the transmission as not sent b. Proceed with your message c. Wait and I will call you d. Hold your present position

Description : The definition of the phrase “STANDBY” is: a. Consider the transmission as not sent b. Proceed with your message c. Wait and I will call you d. Hold your present position

Last Answer : c. Wait and I will call you

The message “READABILITY 3” means: a. Readable now and then b. Unreadable c. Readable d. Readable but with difficulty

Description : The message “READABILITY 3” means: a. Readable now and then b. Unreadable c. Readable d. Readable but with difficulty

Last Answer : d. Readable but with difficulty