When converting 7,000 nA to microamperes, the result is?

When converting 7,000 nA to microamperes, the result is?

A.0.007 μA

B.0.7 μA

C.700 μA

D.7 μA
by

1 Answer

Answer :

When converting 7,000 nA to microamperes, the result is?

A.0.007 μA

B.0.7 μA

C.700 μA

D.7 μA

by

Related questions

When converting 0.16 mA to microamperes, the result is?

Description : When converting 0.16 mA to microamperes, the result is? A.16 μA B.160 μA C.1,600 μA D.0.0016 μA

Last Answer : When converting 0.16 mA to microamperes, the result is? A.16 μA B.160 μA C.1,600 μA D.0.0016 μA

Converting 7,000 nA into microampere will result in: A. 0.007 µA B. 0.7 µA C. 700 µA D. 7 µA

Description : Converting 7,000 nA into microampere will result in: A. 0.007 µA B. 0.7 µA C. 700 µA D. 7 µA

Last Answer : Converting 7,000 nA into microampere will result in: 7 µA

There are two properties of the cell necessary to maintain nonequilibrium cellular composition; the first is selectivity and the second is energy conversion. Which of the following statement(s) is/are true concerning energy converting transport? a. The site of energy conversion and transport in the plasma membrane involves the phospholipid component b. The Na+-K++-ATPase derives energy from hydrolysis of extracellular ATP c. In some systems, energy inherent in the transmembrane ion gradient can be used to drive transport of a second species d. Examples of species transported via secondary active transport include hydrogen ions, calcium, amino acids and glucose

Description : There are two properties of the cell necessary to maintain nonequilibrium cellular composition; the first is selectivity and the second is energy conversion. Which of the following statement(s ... transported via secondary active transport include hydrogen ions, calcium, amino acids and glucose

Last Answer : Answer: c, d The selectivity of the plasma membrane, although impressive, cannot account for the nonequilibrium composition of living cells. A cell can be maintained in a nonequilibrium state only by ... to drive the transport of a second species such as protons, calcium, amino acids, or glucose

A certain transformer has 400 turns in the primary winding and 2,000 turns in the secondary

Description : A certain transformer has 400 turns in the primary winding and 2,000 turns in the secondary winding. The turns ratio is? A.0.2 B.0.4 C.5 D.25

Last Answer : A certain transformer has 400 turns in the primary winding and 2,000 turns in the secondary winding. The turns ratio is? A.0.2 B.0.4 C.5 D.25

If it takes 400 ms to use 12,000 J of energy, the power is?

Description : If it takes 400 ms to use 12,000 J of energy, the power is? A.30 kW B.30 W C.3 W D.300 kW

Last Answer : If it takes 400 ms to use 12,000 J of energy, the power is? A.30 kW B.30 W C.3 W D.300 kW

Two series resistors are connected to an ac source. If there are 7.5 V rms across one resistor

Description : Two series resistors are connected to an ac source. If there are 7.5 V rms across one resistor and 4.2 V rms across the other, the peak source voltage is? A.16.54 V B.1.65 V C.10.60 V D.5.93 V

Last Answer : Two series resistors are connected to an ac source. If there are 7.5 V rms across one resistor and 4.2 V rms across the other, the peak source voltage is? A.16.54 V B.1.65 V C.10.60 V D.5.93 V

Which of the following statement(s) is/are true concerning heparin-associated thrombocytopenia? a. Heparin-associated thrombocytopenia occurs only in the face of over anticoagulation with heparin b. Severe thrombocytopenia (platelet count less than 100,000) is seen in less than 10% of patients treated with heparin c. Heparin-associated thrombocytopenia is due to the aggregation of platelets and may result in thrombosis or embolic episodes d. Heparin-associated thrombocytopenia may be seen within hours of initiation of heparin therapy

Description : Which of the following statement(s) is/are true concerning heparin-associated thrombocytopenia? a. Heparin-associated thrombocytopenia occurs only in the face of over anticoagulation with heparin b. ... d. Heparin-associated thrombocytopenia may be seen within hours of initiation of heparin therapy

Last Answer : Answer: b, c Heparin-associated thrombocytopenia occurs in 0.6% to 30% of patients who receive heparin, although severe thrombocytopenia (platelet counts less than 100,000) is seen in ... as coating on pulmonary artery catheters or low rate infusion into arterial catheters may cause this syndrome

Jake’s Market recorded the following events involving a recent purchase of merchandise: Received goods for $20,000, terms 2/10, n/30. Returned $400 of the shipment for credit. Paid $100 freight on the shipment. Paid the invoice within the discount period. As a result of these events, the company’s merchandise inventory a. increased by $19,208. b. increased by $19,700. c. increased by $19,306. d. increased by $19,308.

Description : Jake's Market recorded the following events involving a recent purchase of merchandise: Received goods for $20,000, terms 2/10, n/30. Returned $400 of the shipment for credit. Paid $100 freight on the shipment. ... . b. increased by $19,700. c. increased by $19,306. d. increased by $19,308.

Last Answer : d. increased by $19,308.

Zach’s Market recorded the following events involving a recent purchase of merchandise: Received goods for $50,000, terms 2/10, n/30. Returned $1,000 of the shipment for credit. Paid $250 freight on the shipment. Paid the invoice within the discount period. As a result of these events, the company’s merchandise inventory a. increased by $48,020. b. increased by $49,250. c. increased by $48,265. d. increased by $48,270.

Description : Zach's Market recorded the following events involving a recent purchase of merchandise: Received goods for $50,000, terms 2/10, n/30. Returned $1,000 of the shipment for credit. Paid $250 freight on the shipment ... 020. b. increased by $49,250. c. increased by $48,265. d. increased by $48,270.

Last Answer : d. increased by $48,270.

Gross profit are Rs.50,000 and expenses not result in the application of funds are Rs.10000 funds from operation will be a) Rs.60000 b) Rs.50000 c) Rs. 40000 d) Rs. 30000

Description : Gross profit are Rs.50,000 and expenses not result in the application of funds are Rs.10000 funds from operation will be a) Rs.60000 b) Rs.50000 c) Rs. 40000 d) Rs. 30000

Last Answer : a) Rs.60000

A computer program selects an integer in the set {k : 1 ≤ k ≤ 10,00,000} at random and prints out the result. This process is repeated 1 million times. What is the probability that the value k = 1 appears in the printout atleast once ? (A) 0.5 (B) 0.704 (C) 0.632121 (D) 0.68

Description : A computer program selects an integer in the set {k : 1 ≤ k ≤ 10,00,000} at random and prints out the result. This process is repeated 1 million times. What is the probability that the value k = 1 appears in the printout atleast once ? (A) 0.5 (B) 0.704 (C) 0.632121 (D) 0.68

Last Answer : (C) 0.632121

Inductance

Description : Inductance

Last Answer : Inductance

Resistance

Description : Resistance

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

For one ac cycles .. alternator needs to rotate??

Description : please answer

Last Answer : 360 degree . 180 Degree Positive and 180 degree negative

An ideal power supply consist of

Description : An ideal power supply consist of   (A) Very small output resistance (B) Zero Internal resistance (C) Very large input resistance (D) Very large output resistance

Last Answer : An ideal power supply consist of Zero Internal resistance 

When a sine wave has a frequency of 100 Hz in 12 s it goes through?

Description : When a sine wave has a frequency of 100 Hz in 12 s it goes through? A.1/100 cycle B.12 cycles C.120 cycles D.1,200 cycles

Last Answer : When a sine wave has a frequency of 100 Hz in 12 s it goes through? A.1/100 cycle B.12 cycles C.120 cycles D.1,200 cycles

In order to get maximum power transfer from a capacitive source, the load must?

Description : In order to get maximum power transfer from a capacitive source, the load must? A.have a capacitive reactance equal to circuit resistance B.have an impedance that is the complex conjugate of the source impedance C.be as capacitive as it is inductive D.none of the above

Last Answer : In order to get maximum power transfer from a capacitive source, the load must? A.have a capacitive reactance equal to circuit resistance B.have an impedance that is the complex conjugate of the source impedance C.be as capacitive as it is inductive D.none of the above

Fourteen milliamperes can be expressed as?

Description : Fourteen milliamperes can be expressed as? A.14 MA B.14 μA C.14 kA D.14 mA

Last Answer : Fourteen milliamperes can be expressed as? A.14 MA B.14 μA C.14 kA D.14 mA

How much voltage is needed to produce 2.5 A of current through a 200 ohms resistor?

Description : How much voltage is needed to produce 2.5 A of current through a 200 ohms resistor? A.50 V B.500 V C.80 V D.8 V

Last Answer : 500 V

When there is 12 mA of current through a 1.2 k ohms resistor, the voltage across the resistor is?

Description : When there is 12 mA of current through a 1.2 k ohms resistor, the voltage across the resistor is? A.14.4 V B.1.4 V C.100 V D.10 V

Last Answer : When there is 12 mA of current through a 1.2 k ohms resistor, the voltage across the resistor is? A.14.4 V B.1.4 V C.100 V D.10 V

How much resistance is needed to draw 17.6 mA from a 12 volt source?

Description : How much resistance is needed to draw 17.6 mA from a 12 volt source? A.212 ohms B.6.8 kohms C.68 ohms D.680 ohms

Last Answer : How much resistance is needed to draw 17.6 mA from a 12 volt source? A.212 ohms B.6.8 kohms C.68 ohms D.680 ohms

When placed close together, two positively charged materials will?

Description : When placed close together, two positively charged materials will? A.attract B.become neutral C.become negative D.repel

Last Answer : When placed close together, two positively charged materials will? A.attract B.become neutral C.become negative D.repel

The colored bands for a 4,700 ohm resistor with a ten percent tolerance are?

Description : The colored bands for a 4,700 ohm resistor with a ten percent tolerance are? A.yellow, violet, red, gold B.yellow, violet, orange, gold C.yellow, violet, red, silver D.orange, violet, red, silver

Last Answer : The colored bands for a 4,700 ohm resistor with a ten percent tolerance are? A.yellow, violet, red, gold B.yellow, violet, orange, gold C.yellow, violet, red, silver D.orange, violet, red, silver

A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt- hours of

Description : A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt- hours of energy does it consume? A.20.16 kWh B.201.6 kWh C.2.01 kWh D.8.4 kWh

Last Answer : A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt- hours of energy does it consume? A.20.16 kWh B.201.6 kWh C.2.01 kWh D.8.4 kWh

When the turns ratio of a transformer is 20 and the primary ac voltage is 12 V, the secondary voltage is?

Description : When the turns ratio of a transformer is 20 and the primary ac voltage is 12 V, the secondary voltage is? A.12 V B.120 V C.240 V D.2,400 V

Last Answer : When the turns ratio of a transformer is 20 and the primary ac voltage is 12 V, the secondary voltage is? A.12 V B.120 V C.240 V D.2,400 V

In a certain loaded transformer, the secondary voltage is one-fourth the primary voltage. The secondary

Description : In a certain loaded transformer, the secondary voltage is one-fourth the primary voltage. The secondary current is? A.one-fourth the primary current B.four times the primary current C.equal to the primary current D.one-fourth the primary current and equal to the primary current

Last Answer : In a certain loaded transformer, the secondary voltage is one-fourth the primary voltage. The secondary current is? A.one-fourth the primary current B.four times the primary current C.equal to the primary current D.one-fourth the primary current and equal to the primary current

In a Y-connected circuit, the magnitude of each line current is?

Description : In a Y-connected circuit, the magnitude of each line current is? A.one-third the phase current B.three times the corresponding phase current C.equal to the corresponding phase current D.zero

Last Answer : In a Y-connected circuit, the magnitude of each line current is? A.one-third the phase current B.three times the corresponding phase current C.equal to the corresponding phase current D.zero

The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330

Description : The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330 ohms load. The turns ratio is 3:1. What is the secondary voltage? A.2 V B.20 V C.180 V D.18 V

Last Answer : The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330 ohms load. The turns ratio is 3:1. What is the secondary voltage? A.2 V B.20 V C.180 V D.18 V

The turns ratio required to match an 80 ohms source to a 320 ohms load is?

Description : The turns ratio required to match an 80 ohms source to a 320 ohms load is? A.80 B.20 C.4 D.2

Last Answer : c

When the pointer of an analog ohmmeter reads close to zero, the resistor being measured is?

Description : When the pointer of an analog ohmmeter reads close to zero, the resistor being measured is? A.overheated B.shorted C.open D.reversed

Last Answer : When the pointer of an analog ohmmeter reads close to zero, the resistor being measured is? A.overheated B.shorted C.open D.reversed

A resistance of 3.3 M ohms is connected across a 500 V source. The resulting current is approximately?

Description : A resistance of 3.3 M ohms is connected across a 500 V source. The resulting current is approximately? A.15.1 μA B.151 μA C.66 mA D.660 mA

Last Answer : A

The formula to find I when the values of V and R are known is?

Description : The formula to find I when the values of V and R are known is? A.I = VR B.I = R/V C.V = IR D.I = V/R

Last Answer : The formula to find I when the values of V and R are known is? A.I = VR B.I = R/V C.V = IR D.I = V/R

The average value of a 12 V peak sine wave over one complete cycle is?

Description : The average value of a 12 V peak sine wave over one complete cycle is? A.0 V B.1.27 V C.7.64 V D.6.37 V

Last Answer : The average value of a 12 V peak sine wave over one complete cycle is? A.0 V B.1.27 V C.7.64 V D.6.37 V

A material that does not allow current under normal conditions is a(n)?

Description : A material that does not allow current under normal conditions is a(n)? A.insulator B.conductor C.semiconductor D.valence

Last Answer : A material that does not allow current under normal conditions is a(n)? A.insulator B.conductor C.semiconductor D.valence

Current flows in a circuit when?

Description : Current flows in a circuit when? A.a switch is opened B.a switch is closed C.the switch is either open or closed D.there is no voltage

Last Answer : Current flows in a circuit when? A.a switch is opened B.a switch is closed C.the switch is either open or closed D.there is no voltage

Four amperes of current are measured through a 24 ohms resistor connected across a voltage

Description : Four amperes of current are measured through a 24 ohms resistor connected across a voltage source. How much voltage does the source produce? A.960 V B.9.6 V C.96 V D.8 V

Last Answer : Four amperes of current are measured through a 24 ohms resistor connected across a voltage source. How much voltage does the source produce? A.960 V B.9.6 V C.96 V D.8 V

You are measuring the current in a circuit that is operated on an 18 V battery. The ammeter

Description : You are measuring the current in a circuit that is operated on an 18 V battery. The ammeter reads 40 mA. Later you notice the current has dropped to 20 mA. How much has the voltage changed? A.9 V B.900 mV C.0 V D.18 V

Last Answer : You are measuring the current in a circuit that is operated on an 18 V battery. The ammeter reads 40 mA. Later you notice the current has dropped to 20 mA. How much has the voltage changed? A.9 V B.900 mV C.0 V D.18 V

How much resistance is required to limit the current from a 12 V battery to 3.6 mA?

Description : How much resistance is required to limit the current from a 12 V battery to 3.6 mA? A.3.3 k ohms B.33 k ohms C.2.2 k ohms D.22 k ohms

Last Answer : How much resistance is required to limit the current from a 12 V battery to 3.6 mA? A.3.3 k ohms B.33 k ohms C.2.2 k ohms D.22 k ohms

The number of millivolts in 0.06 kilovolts is?

Description : The number of millivolts in 0.06 kilovolts is? A.600 V B.6,000 mV C.60,000 mV D.600,000 mV

Last Answer : The number of millivolts in 0.06 kilovolts is? A.600 V B.6,000 mV C.60,000 mV D.600,000 mV

A sine wave of 15 kHz is changing at a faster rate than a sine wave with a frequency of?

Description : A sine wave of 15 kHz is changing at a faster rate than a sine wave with a frequency of? B.12 kHz C.18 kHz D.1.3 MHz

Last Answer : A sine wave of 15 kHz is changing at a faster rate than a sine wave with a frequency of? B.12 kHz C.18 kHz D.1.3 MHz

If a transformer has 50 turns in the primary winding and 10 turns in the secondary winding,

Description : If a transformer has 50 turns in the primary winding and 10 turns in the secondary winding, what is the reflective resistance if the secondary load resistance is 250 ohms? A.250 ohms B.25 ohms C.6,250 ohms D.62,500 ohms

Last Answer : 6,250 ohms

How many watt-hours represent 65 W used for 18 h?

Description : How many watt-hours represent 65 W used for 18 h? A.11.7 Wh B.1,170 Wh C.11,700 Wh D.117,000 Wh

Last Answer : How many watt-hours represent 65 W used for 18 h? A.11.7 Wh B.1,170 Wh C.11,700 Wh D.117,000 Wh

In 0.025 W, there are?

Description : In 0.025 W, there are? A.25 kW B.0.00025 mW C.2,500 μW D.25 mW

Last Answer : In 0.025 W, there are? A.25 kW B.0.00025 mW C.2,500 μW D.25 mW

A two-terminal variable resistor is known as a?

Description : A two-terminal variable resistor is known as a? A.potentiometer B.thermistor C.rheostat D.wiper

Last Answer : A two-terminal variable resistor is known as a? A.potentiometer B.thermistor C.rheostat D.wiper

The minimum resistance value for a blue, gray, red, silver resistor is?

Description : The minimum resistance value for a blue, gray, red, silver resistor is? A.612 ohms B.6,120 ohms C.6,800 ohms D.6,460 ohms

Last Answer : The minimum resistance value for a blue, gray, red, silver resistor is? A.612 ohms B.6,120 ohms C.6,800 ohms D.6,460 ohms

Twelve volts are applied across a resistor. A current of 3 mA is measured. What is the value of

Description : Twelve volts are applied across a resistor. A current of 3 mA is measured. What is the value of the resistor? A.4 ohms B.400 ohms C.4 kohms D.4.4 ohms

Last Answer : Twelve volts are applied across a resistor. A current of 3 mA is measured. What is the value of the resistor? A.4 ohms B.400 ohms C.4 kohms D.4.4 ohms

Approximately how many milliamperes of current flow through a circuit with a 40 V source and

Description : Approximately how many milliamperes of current flow through a circuit with a 40 V source and 6.8 k ohms of resistance? A.27.2 mA B.59 mA C.5.9 mA D.590 mA

Last Answer : Approximately how many milliamperes of current flow through a circuit with a 40 V source and 6.8 k ohms of resistance? A.27.2 mA B.59 mA C.5.9 mA D.590 mA

If the peak value of a sine wave is 30 V, the rms value is?

Description : If the peak value of a sine wave is 30 V, the rms value is? A.19.08 V B.7.07 V C.0.707 V D.23.10 V

Last Answer : If the peak value of a sine wave is 30 V, the rms value is? A.19.08 V B.7.07 V C.0.707 V D.23.10 V

A constant load power means a uniform conversion of?

Description : A constant load power means a uniform conversion of? A.mechanical to electrical energy B.electrical to mechanical energy C.current to voltage D.voltage to current

Last Answer : A constant load power means a uniform conversion of? A.mechanical to electrical energy B.electrical to mechanical energy C.current to voltage D.voltage to current