In 0.025 W, there are?

In 0.025 W, there are?

A.25 kW

B.0.00025 mW

C.2,500 μW

D.25 mW
by

1 Answer

Answer :

In 0.025 W, there are?

A.25 kW

B.0.00025 mW

C.2,500 μW

D.25 mW

by

Related questions

A metal wire of 0.01 m dia and thermal conductivity 200 W/m.K is exposed to a fluid stream with a convective heat transfer coefficient of 100 W/m2 .K. The Biot number is (A) 5.6 (B) 0.025 (C) 3.5 (D) 0.0035

Description : A metal wire of 0.01 m dia and thermal conductivity 200 W/m.K is exposed to a fluid stream with a convective heat transfer coefficient of 100 W/m2 .K. The Biot number is (A) 5.6 (B) 0.025 (C) 3.5 (D) 0.0035

Last Answer : (B) 0.025

What is 0.025 million in number form?

Description : What is 0.025 million in number form?

Last Answer : 25000

Is 0.05 mg more than 0.025 mg?

Description : Is 0.05 mg more than 0.025 mg?

Last Answer : Yes it is twice as much

How much cents does 0.025 represent?

Description : How much cents does 0.025 represent?

Last Answer : $0.025 = 2.5 cents $0.25 = 25 cents

An adult human lung has a volume of 2.9 liters. If its volume decreases to 1.2 liters and it contains 0.049 mole of air after it exhales, how many moles of air does it contain when full A. 0.025 mol B. 0.041 mol C. 0.083 mol D. 0.12 mol E. 0.14 mol?

Description : An adult human lung has a volume of 2.9 liters. If its volume decreases to 1.2 liters and it contains 0.049 mole of air after it exhales, how many moles of air does it contain when full A. 0.025 mol B. 0.041 mol C. 0.083 mol D. 0.12 mol E. 0.14 mol?

Last Answer : An adult human lung has a volume of 2.9 liters. If its volume decreases to 1.2 liters and it contains 0.049 mole of air after it exhales, how many moles of air does it contain when full? A. 0.025 mol B. 0.041 mol C. 0.083 mol D. 0.12 mol E. 0.14 mol

One international unit (I.U) of vitamin D is defined as the biological activity of (A) 0.025 µg of cholecalciferol (B) 0.025 µg of 7-dehydrocholecalciferol (C) 0.025 µg of ergosterol (D) 0.025 µg of ergocalciferol VITAMINS 113

Description : One international unit (I.U) of vitamin D is defined as the biological activity of (A) 0.025 µg of cholecalciferol (B) 0.025 µg of 7-dehydrocholecalciferol (C) 0.025 µg of ergosterol (D) 0.025 µg of ergocalciferol VITAMINS 113

Last Answer : Answer : A

For the open drain (N = 0.025) shown in the below figure, the discharge is A. 26.88 cumecs B. 27.88 cumecs C. 28.88 cumecs D. 29.88 cumecs

Description : For the open drain (N = 0.025) shown in the below figure, the discharge is A. 26.88 cumecs B. 27.88 cumecs C. 28.88 cumecs D. 29.88 cumecs

Last Answer : ANS: C

Determine the lower half-power frequency of a class-C amplifier having upper half-power frequency of 10.025 MHz, a resonant frequency 5 MHz and a circuit Q of 10. A. 1.0025 MHz B. 10.525 MHz C. 0.5 MHz D. 10 MHz

Description : Determine the lower half-power frequency of a class-C amplifier having upper half-power frequency of 10.025 MHz, a resonant frequency 5 MHz and a circuit Q of 10. A. 1.0025 MHz B. 10.525 MHz C. 0.5 MHz D. 10 MHz

Last Answer : A. 1.0025 MHz

The velocity of thermal (slow) neutrons triggering nuclear fissionreaction (having energy equal to 0.025 eV) is about __________metres/second.(A) 1100(B) 2200(C) 3300(D) 4400

Description : The velocity of thermal (slow) neutrons triggering nuclear fissionreaction (having energy equal to 0.025 eV) is about __________ metres/second. (A) 1100 (B) 2200 (C) 3300 (D) 4400

Last Answer : (B) 2200

Velocity of the thermal neutron (< 0.025 eV) used for fission of U-235 is around __________ m/sec. (A) 1 (B) 2200 (C) 3 × 10 11 (D) 9 × 10 21

Description : Velocity of the thermal neutron (< 0.025 eV) used for fission of U-235 is around __________ m/sec. (A) 1 (B) 2200 (C) 3 × 10 11 (D) 9 × 10 21

Last Answer : (B) 2200

Thermal neutrons which are used to cause the fission of U-235 haveenergy __________ eV.(A) < 0.025(B) > 1(C) 1-25(D) > 200

Description : Thermal neutrons which are used to cause the fission of U-235 haveenergy __________ eV. (A) < 0.025 (B) > 1 (C) 1-25 (D) > 200

Last Answer : (A) < 0.025

The density of Air is-------? A. 0.225 kg/m3 B. 1.025 kg/m3 C. 1.225 kg/m3 (Answer) D. 1.425 kg/m3

Description : The density of Air is-------? A. 0.225 kg/m3 B. 1.025 kg/m3 C. 1.225 kg/m3 (Answer) D. 1.425 kg/m3

Last Answer : C. 1.225 kg/m3 (Answer)

Evaluate: (0.625 × 0.0729 × 28.9)/(0.0081 × 0.025 × 1.7) a) 382.5 b) 3725 c) 3625 d) 3825 e) None of these

Description : Evaluate: (0.625 × 0.0729 × 28.9)/(0.0081 × 0.025 × 1.7) a) 382.5 b) 3725 c) 3625 d) 3825 e) None of these

Last Answer : (0.625×0.0729×28.9) / (0.0081×0.025×1.7) = (625/25) × (729/81) × (289/17) = 25×9× 17 = 3825. Answer: d)

The electric force between two charges placed in air is 2 Newton. When placed in a medium of ∈r = 80, the force reduced to: (a) 0.029 N (b) 0.025 N (c) 0.03 N (d) 0.04 N

Description : The electric force between two charges placed in air is 2 Newton. When placed in a medium of ∈r = 80, the force reduced to: (a) 0.029 N (b) 0.025 N (c) 0.03 N (d) 0.04 N

Last Answer : (b) 0.025 N

what is 3.025 in expanded form?

Description : what is 3.025 in expanded form?

Last Answer : 3000+20+5

How do you write 37.025 in words forms?

Description : How do you write 37.025 in words forms?

Last Answer : Thirty Seven and Twenty-Five Thousandths.

How do you do 8.025 as a mixed number in simplest form?

Description : How do you do 8.025 as a mixed number in simplest form?

Last Answer : Need answer

Normal specific gravity of urine is (A) 1.000–1.010 (B) 1.012–1.024 (C) 1.025–1.034 (D) 1.035–1.045

Description : Normal specific gravity of urine is (A) 1.000–1.010 (B) 1.012–1.024 (C) 1.025–1.034 (D) 1.035–1.045

Last Answer : B

Assume a frequency range of 405.0125 MHz to 405.0875 MHz and 25 kHz channeling plan, determine the center frequency of the second channel from the lower limit. A. 405.030 MHz B. 405.025 MHz C. 405.050 MHz D. 405.075 MHz

Description : Assume a frequency range of 405.0125 MHz to 405.0875 MHz and 25 kHz channeling plan, determine the center frequency of the second channel from the lower limit. A. 405.030 MHz B. 405.025 MHz C. 405.050 MHz D. 405.075 MHz

Last Answer : C. 405.050 MHz

Assume a frequency range of 401.000 MHz to 401.050 MHz, if you apply 25 kHz channeling plan, determine the center frequency of the first channel from the lower limit. A. 401.010 MHz B. 401.0125 MHz C. 401.025 MHz D. 401.00625 MHz

Description : Assume a frequency range of 401.000 MHz to 401.050 MHz, if you apply 25 kHz channeling plan, determine the center frequency of the first channel from the lower limit. A. 401.010 MHz B. 401.0125 MHz C. 401.025 MHz D. 401.00625 MHz

Last Answer : B. 401.0125 MHz

When fluid intake is normal, the specific gravity of urine should be a) 1.010-1.025. Urine specific gravity is a measurement of the kidney’s ability to concentrate urine.

Description : When fluid intake is normal, the specific gravity of urine should be a) 1.010-1.025. Urine specific gravity is a measurement of the kidney's ability to concentrate urine. b) 1.000. The ... intake. d) greater than 1.025. A urine specific gravity greater than 1.025 may indicate overhydration.

Last Answer : a) 1.010-1.025. Urine specific gravity is a measurement of the kidney’s ability to concentrate urine.

When the nurse notes that the post cardiac surgery patient demonstrates low urine output (< 25 ml/hr) with high specific gravity (> 1.025), the nurse suspects: a) Inadequate fluid volume Urine output of less than 25 ml/hr may indicate a decrease in cardiac output. A high specific gravity indicates increased concentration of solutes in the urine which occurs with inadequate fluid volume. b) Normal glomerular filtration Indices of normal glomerular filtration are output of 25 ml or greater per hour and specific gravity between 1.010 and 1.025. c) Overhydration Overhydration is manifested by high urine output with low specific gravity. d) Anuria The anuric patient does not produce urine.

Description : When the nurse notes that the post cardiac surgery patient demonstrates low urine output (< 25 ml/hr) with high specific gravity (> 1.025), the nurse suspects: a) Inadequate fluid volume Urine ... by high urine output with low specific gravity. d) Anuria The anuric patient does not produce urine.

Last Answer : a) Inadequate fluid volume Urine output of less than 25 ml/hr may indicate a decrease in cardiac output. A high specific gravity indicates increased concentration of solutes in the urine which occurs with inadequate fluid volume.

Torque and bending moment of 100 kN.m and 200 kN.m acts on a shaft which has external diameter twice of internal diameter. What is the external diameter of the shaft which is subjected to a maximum shear stress of 90 N/mm2? a. 116.5 mm b. 233.025 mm c. 587.1 mm d. 900 mm

Description : Torque and bending moment of 100 kN.m and 200 kN.m acts on a shaft which has external diameter twice of internal diameter. What is the external diameter of the shaft which is subjected to a maximum shear stress of 90 N/mm2? a. 116.5 mm b. 233.025 mm c. 587.1 mm d. 900 mm

Last Answer : c. 587.1 mm

A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt- hours of

Description : A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt- hours of energy does it consume? A.20.16 kWh B.201.6 kWh C.2.01 kWh D.8.4 kWh

Last Answer : A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt- hours of energy does it consume? A.20.16 kWh B.201.6 kWh C.2.01 kWh D.8.4 kWh

How many watt-hours represent 65 W used for 18 h?

Description : How many watt-hours represent 65 W used for 18 h? A.11.7 Wh B.1,170 Wh C.11,700 Wh D.117,000 Wh

Last Answer : How many watt-hours represent 65 W used for 18 h? A.11.7 Wh B.1,170 Wh C.11,700 Wh D.117,000 Wh

If you used 600 W of power for 60 h, you have used?

Description : If you used 600 W of power for 60 h, you have used? A.36 kWh B.3.6 kWh C.10 kWh D.1 kWh

Last Answer : If you used 600 W of power for 60 h, you have used? A.36 kWh B.3.6 kWh C.10 kWh D.1 kWh

With three resistances connected in parallel, if each dissipates 20 W the ...

Description :  With three resistances connected in parallel, if each dissipates 20 W the total power supplied by the voltage source equals?

Last Answer : Power is the only thing which is additive in both connection whether it is parallel or series connection so total power consumed will addition of all individual power =20+20+20 = 60 watt

Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as?

Description : Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as?

Last Answer : Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as 2 : 5.

A 40 W bulb is connected in series with a room heater. If now 40 W bulb is replaced by...

Description : A 40 W bulb is connected in series with a room heater. If now 40 W bulb is replaced by 100 W bulb, the heater output will?

Last Answer : A 40 W bulb is connected in series with a room heater. If now 40 W bulb is replaced by 100 W bulb, the heater output will increase.

Three 60 W bulbs are in parallel across the 60 V power line. If one bulb burns open?

Description : Three 60 W bulbs are in parallel across the 60 V power line. If one bulb burns open?

Last Answer : Three 60 W bulbs are in parallel across the 60 V power line. If one bulb burns open the other two bulbs will light.

When converting 0.16 mA to microamperes, the result is?

Description : When converting 0.16 mA to microamperes, the result is? A.16 μA B.160 μA C.1,600 μA D.0.0016 μA

Last Answer : When converting 0.16 mA to microamperes, the result is? A.16 μA B.160 μA C.1,600 μA D.0.0016 μA

The number of millivolts in 0.06 kilovolts is?

Description : The number of millivolts in 0.06 kilovolts is? A.600 V B.6,000 mV C.60,000 mV D.600,000 mV

Last Answer : The number of millivolts in 0.06 kilovolts is? A.600 V B.6,000 mV C.60,000 mV D.600,000 mV

If an incandescent lamp of 80 ohms resistance takes a current of 0.75 ampere, what voltage is

Description : If an incandescent lamp of 80 ohms resistance takes a current of 0.75 ampere, what voltage is required to light it? A.45 volts B.60 volts c.23 volts D.None of these

Last Answer : V=IR    = 80*0.75     = 60 volts

If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes?

Description : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes?

Last Answer : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes 0.4 ohm.

Inductance

Description : Inductance

Last Answer : Inductance

Resistance

Description : Resistance

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

For one ac cycles .. alternator needs to rotate??

Description : please answer

Last Answer : 360 degree . 180 Degree Positive and 180 degree negative

An ideal power supply consist of

Description : An ideal power supply consist of   (A) Very small output resistance (B) Zero Internal resistance (C) Very large input resistance (D) Very large output resistance

Last Answer : An ideal power supply consist of Zero Internal resistance 

When a sine wave has a frequency of 100 Hz in 12 s it goes through?

Description : When a sine wave has a frequency of 100 Hz in 12 s it goes through? A.1/100 cycle B.12 cycles C.120 cycles D.1,200 cycles

Last Answer : When a sine wave has a frequency of 100 Hz in 12 s it goes through? A.1/100 cycle B.12 cycles C.120 cycles D.1,200 cycles

In order to get maximum power transfer from a capacitive source, the load must?

Description : In order to get maximum power transfer from a capacitive source, the load must? A.have a capacitive reactance equal to circuit resistance B.have an impedance that is the complex conjugate of the source impedance C.be as capacitive as it is inductive D.none of the above

Last Answer : In order to get maximum power transfer from a capacitive source, the load must? A.have a capacitive reactance equal to circuit resistance B.have an impedance that is the complex conjugate of the source impedance C.be as capacitive as it is inductive D.none of the above

Fourteen milliamperes can be expressed as?

Description : Fourteen milliamperes can be expressed as? A.14 MA B.14 μA C.14 kA D.14 mA

Last Answer : Fourteen milliamperes can be expressed as? A.14 MA B.14 μA C.14 kA D.14 mA

How much voltage is needed to produce 2.5 A of current through a 200 ohms resistor?

Description : How much voltage is needed to produce 2.5 A of current through a 200 ohms resistor? A.50 V B.500 V C.80 V D.8 V

Last Answer : 500 V

When there is 12 mA of current through a 1.2 k ohms resistor, the voltage across the resistor is?

Description : When there is 12 mA of current through a 1.2 k ohms resistor, the voltage across the resistor is? A.14.4 V B.1.4 V C.100 V D.10 V

Last Answer : When there is 12 mA of current through a 1.2 k ohms resistor, the voltage across the resistor is? A.14.4 V B.1.4 V C.100 V D.10 V

How much resistance is needed to draw 17.6 mA from a 12 volt source?

Description : How much resistance is needed to draw 17.6 mA from a 12 volt source? A.212 ohms B.6.8 kohms C.68 ohms D.680 ohms

Last Answer : How much resistance is needed to draw 17.6 mA from a 12 volt source? A.212 ohms B.6.8 kohms C.68 ohms D.680 ohms

When placed close together, two positively charged materials will?

Description : When placed close together, two positively charged materials will? A.attract B.become neutral C.become negative D.repel

Last Answer : When placed close together, two positively charged materials will? A.attract B.become neutral C.become negative D.repel

The colored bands for a 4,700 ohm resistor with a ten percent tolerance are?

Description : The colored bands for a 4,700 ohm resistor with a ten percent tolerance are? A.yellow, violet, red, gold B.yellow, violet, orange, gold C.yellow, violet, red, silver D.orange, violet, red, silver

Last Answer : The colored bands for a 4,700 ohm resistor with a ten percent tolerance are? A.yellow, violet, red, gold B.yellow, violet, orange, gold C.yellow, violet, red, silver D.orange, violet, red, silver

When the turns ratio of a transformer is 20 and the primary ac voltage is 12 V, the secondary voltage is?

Description : When the turns ratio of a transformer is 20 and the primary ac voltage is 12 V, the secondary voltage is? A.12 V B.120 V C.240 V D.2,400 V

Last Answer : When the turns ratio of a transformer is 20 and the primary ac voltage is 12 V, the secondary voltage is? A.12 V B.120 V C.240 V D.2,400 V

In a certain loaded transformer, the secondary voltage is one-fourth the primary voltage. The secondary

Description : In a certain loaded transformer, the secondary voltage is one-fourth the primary voltage. The secondary current is? A.one-fourth the primary current B.four times the primary current C.equal to the primary current D.one-fourth the primary current and equal to the primary current

Last Answer : In a certain loaded transformer, the secondary voltage is one-fourth the primary voltage. The secondary current is? A.one-fourth the primary current B.four times the primary current C.equal to the primary current D.one-fourth the primary current and equal to the primary current

In a Y-connected circuit, the magnitude of each line current is?

Description : In a Y-connected circuit, the magnitude of each line current is? A.one-third the phase current B.three times the corresponding phase current C.equal to the corresponding phase current D.zero

Last Answer : In a Y-connected circuit, the magnitude of each line current is? A.one-third the phase current B.three times the corresponding phase current C.equal to the corresponding phase current D.zero

The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330

Description : The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330 ohms load. The turns ratio is 3:1. What is the secondary voltage? A.2 V B.20 V C.180 V D.18 V

Last Answer : The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330 ohms load. The turns ratio is 3:1. What is the secondary voltage? A.2 V B.20 V C.180 V D.18 V