Inductive tuning of a resonant cavity is accomplished by  placing a nonmagnetic slug in what area?

1 Answer

Answer :

The area of maximum H lines.

Related questions

Description : In changing the frequency of a cavity, what is accomplished by placing a nonmagnetic slug in the area of maximum H lines

Last Answer : Inductive Coupling

Description : Capacitive tuning by inserting a ring into the cavity slot of a magnetron is accomplished by what type of tuning mechanism?

Last Answer : . A cookie-cutter tuner

Description : Magnetron tuning by altering the surface-to-volume ratio of the hole portion of a hole-and-slot cavity is what type of tuning?

Last Answer : Inductive.

Description : What two variables determine the primary frequency of a resonant cavity?

Last Answer : Size and shape of the cavity.

Description : In series RLC circuit at resonant a) Voltage is in phase with current b) Current is maximum c) Inductive reactance = Capacitive reactance d) All of the above

Last Answer : Ans: All of the above

Description : Capacitors can be used in electric distribution systems to improve power factor. This is accomplished by seesawing energy between the capacitor and the _____________. A. generator B. inductive loads C. resistive loads D. all of the above

Last Answer : Answer: B

Description : A fractionating column is a glass apparatus used to (a) Separate magnetic solids from nonmagnetic solids (b) Separate a mixture in water (c) Separate two or more liquids (d) Extract oils from vegetable matter

Last Answer : Ans:(c)

Description : What is the primary measurement application for tuning forks?

Last Answer : They are used to monitor fixed motor speeds.

Description : The cavities of a multicavity klystron are tuned to slightly different frequencies in what method of tuning?

Last Answer : Stagger tuning.

Description : In a multicavity klystron, tuning all the cavities to the same frequency has what effect on the bandwidth of the tube?

Last Answer : The bandwidth decreases.

Description : What limits the tuning range around the center frequency of a reflex klystron in a particular mode of operation?

Last Answer : The half-power points of the mode.

Description : What type of tuning does the receiver use?

Last Answer : Digital

Description : What are the tuning modes for the coupler group discussed?

Last Answer : Automatic, semiautomatic, and manual.

Description : The resonant frequency of electron wobble can be changed by variation of what force?

Last Answer : The applied magnetic field.

Description : How will an iris that has portions along both the "a" and "b" dimension walls act at the resonant frequency?

Last Answer : As a shunt resistance.

Description : What is the band of frequencies called that is included between the two points at which current falls to 70 percent of its maximum value in a resonant circuit?

Last Answer : Bandwidth of the circuit

Description : In a parallel-resonant circuit, what is the relationship between impedance and current?

Last Answer : Maximum impedance, minimum current.

Description : . In an "ideal" resonant circuit, what is the relationship between impedance and current?

Last Answer : Impedance low Current high.

Description : If the inductor and capacitor values are increased, what happens to the resonant frequency?

Last Answer : Decreases.

Description : . A non-resonant line is a line that has no standing waves of current and voltage on it and is considered to be flat. Why is this true?

Last Answer : The load impedance of such a line is equal to Z0.

Description : What is the impedance of a crystal at its resonant frequency when it is used in the series mode?

Last Answer : Minimum.

Description : What is the impedance of a crystal at its resonant frequency when it is used in the parallel mode?

Last Answer : Maximum

Description : What equipment uses a calibrated resonant circuit to measure frequency?

Last Answer : Wavemeter.

Description : Without strapping, the resonant cavities of a hole-and-slot anode are connected in what manner?

Last Answer : Series.

Description : A cylindrical copper block with resonant cavities around the circumference is used as what component of a magnetron?

Last Answer : Anode or plate

Description : Loose or inefficient coupling of energy into or out of a waveguide can be accomplished by the use of what method?

Last Answer : Slots and apertures.

Description : Serial-to-parallel and parallel-to-serial conversions are accomplished by what type of circuit?

Last Answer : Shift register.

Description : Simultaneous transfer of data may be accomplished with what type of register?

Last Answer : Parallel.

Description : What happens to inductive reactance as frequency increases?

Last Answer : It increases.

Description : Energy can be inserted or removed from a cavity by what three methods?

Last Answer : Probes, loops, and slots.

Description : A cavity that vibrates at its natural frequency produces a louder sound than at other frequencies. What term is used to describe this phenomenon?

Last Answer : Resonance.

Description : Why is the tunnel diode loosely coupled to the cavity in a tunnel-diode oscillator?

Last Answer : To increase the stability.

Description : What element of the reflex klystron replaces the output cavity of a normal klystron?

Last Answer : The reflector or repeller.

Description : Which cavity of a three-cavity klystron causes most of the velocity modulation?

Last Answer : The middle cavity.

Description : How is the electron beam of a three-cavity klystron accelerated toward the drift tube?

Last Answer : A large negative pulse is applied to the cathode.

Description : What can be added to the basic two-cavity klystron to increase the amount of velocity modulation and the power output?

Last Answer : Intermediate cavities between the input and output cavities.

Description : A two-cavity klystron without a feedback path will operate as what type of circuit?

Last Answer : Amplifier.

Description : The two-cavity klystron uses what cavity as an output cavity?

Last Answer : The catcher cavity.

Description : What determines the placement of the catcher cavity?

Last Answer : The frequency period of the buncher grid signal

Description : Punch Buggy or Slug Bug?

Last Answer : Slug Bug here

Description : Can I mail a slug from Portland to Austin?

Last Answer : answer:There are standard packing procedures for earthworms that would probably suit you well. Try contacting a bait shop and see how they get their nightcrawlers. Probably, sealed styrofoam with some moist dirt ... shipped overnight but I'm not exactly sure. Probably not packed in salt, by the way.

Description : My picked raspberries have tiny white worm-like or slug creatures on them. What are they?

Last Answer : you can rinse them gently in a colinder dripping them in 1/2 teasp vinegar and 1 gallon of water.......................and after the sun goes down have mixed a batch of 1 teasp liquid hand ... under the leaves and spray again after it rains. If you don't see a slimmy trail it is some kind of worm

Description : What pesticide do you recommend to get rid of slug worms on a Stella Dwarf Cherry Tree?

Last Answer : after the sun goes down mix 1 teasp hand soap wash w 1 qt water & spray on tree. reapply as needed.

Description : What did one slug say to the other slug? -Riddles

Last Answer : I'll get you next slime.

Description : Who is the author of the book "From Leeches to Slug Glue: 25 Explosive Ideas that Made (and Are Making) Modern Medicine" ? -General Knowledge

Last Answer : Roopa Pai is the author

Description : In a forest community a shelf fungus and a slug live on the side of a decaying tree trunk. The fungus digests and absorbs materials from the tree while the slug eats algae growing on the outside of?

Last Answer : Need answer

Description : Why does a slug leave slime behind it?

Last Answer : The slime helps them stick to whatever surface they're on whiletheir muscles are at rest.

Description : Why does a slug leave slime behind it?

Last Answer : The slime helps them stick to whatever surface they're on whiletheir muscles are at rest.

Description : Is the banana slug warm blooded or cold blooded?

Last Answer : All slugs and snails are cold blooded.

Description : An error in software or hardware is called a bug. What is the alternative computer jargon for it? A) Leech B) Squid C) Slug D) Glitch

Last Answer : Answer : D