What is the purpose of the absorbent material in a directional coupler?

What is the purpose of the absorbent material in a  directional coupler?
by

1 Answer

Answer :

Absorb the energy not directed at the pick-up probe and a  portion of the overall energy
by

Related questions

What is the primary purpose of a directional coupler?

Description : What is the primary purpose of a directional coupler?

Last Answer : Sampling energy within a waveguide.

What happens to reflected energy that enters a directional coupler that is designed to sample incident energy?

Description : What happens to reflected energy that enters a directional coupler that is designed to sample incident energy?

Last Answer : . The reflected energy adds at the absorbent material and is absorbed.

in a directional coupler that is designed to sample the incident energy, what happens to the two portions of the wavefront when they arrive at the pickup probe?

Description : in a directional coupler that is designed to sample the incident energy, what happens to the two portions of the wavefront when they arrive at the pickup probe?

Last Answer : The wavefront portions add.

How far apart are the two holes in a simple directional coupler?

Description : How far apart are the two holes in a simple directional coupler?

Last Answer : 1/4 wavelength.

Describe a directional coupler.

Description : Describe a directional coupler.

Last Answer : A fiber optic coupler that prevents the transfer of power between input fibers.

A component that samples the microwave signal travelling in one direction down to the transmission line A. Isolator B. Combiner C. Directional coupler D. Attenuator

Description : A component that samples the microwave signal travelling in one direction down to the transmission line A. Isolator B. Combiner C. Directional coupler D. Attenuator

Last Answer : C. Directional coupler

Best choice of transmission line component to couple a coaxial line to a parallel-wire line A. Shorting B. Balun C. Slotted line D. Directional coupler

Description : Best choice of transmission line component to couple a coaxial line to a parallel-wire line A. Shorting B. Balun C. Slotted line D. Directional coupler

Last Answer : B. Balun

To couple a coaxial line to parallel line, it is better to use a ______. A. Slotted line B. Quarter-wave transformer C. Directional Coupler D. Balun

Description : To couple a coaxial line to parallel line, it is better to use a ______. A. Slotted line B. Quarter-wave transformer C. Directional Coupler D. Balun

Last Answer : D. Balun

To connect coaxial line to a parallel-wire _________ is the best to use. A. directional coupler B. quarter-wave transformer C. balun D. slotted line

Description : To connect coaxial line to a parallel-wire _________ is the best to use. A. directional coupler B. quarter-wave transformer C. balun D. slotted line

Last Answer : C. balun

Curl cannot be employed in which one of the following? a) Directional coupler b) Magic Tee c) Isolator and Terminator d) Waveguides

Description : Curl cannot be employed in which one of the following? a) Directional coupler b) Magic Tee c) Isolator and Terminator d) Waveguides

Last Answer : d) Waveguides

To couple a coaxialline toa parallel-wire line,itisbesttouse a a. slotted line b.balun c. directional coupler d. quarter-wave transformer

Description : To couple a coaxialline toa parallel-wire line,itisbesttouse a a. slotted line b.balun c. directional coupler d. quarter-wave transformer

Last Answer : b.balun

Fortransmission-line loadmatchingover a range offrequencies,itisbesttouse a a. balun b. broadband directional coupler c. double stub d. single stub of adjustable position

Description : Fortransmission-line loadmatchingover a range offrequencies,itisbesttouse a a. balun b. broadband directional coupler c. double stub d. single stub of adjustable position

Last Answer : c. double stub

Describe the working of directional coupler with neat diagram.

Description : Describe the working of directional coupler with neat diagram. 

Last Answer : Directional couplers are devices that will pass signal across one path while passing a much smaller signal along another path.  One of the most common uses of the directional coupler is to ... . The frequency determines the separation of the two holes as a fraction of the wavelength.  

In a directional coupler:

Description : In a directional coupler:  (1) Isolation (dB) equals coupling plus directivity (2) Coupling (dB) equals isolation plus directivity (3) Directivity (dB) equals isolation plus coupling (4) Isolation (dB) equals (coupling) (directivity)

Last Answer : In a directional coupler: Isolation (dB) equals coupling plus directivity.

What is the purpose of an antenna coupler

Description : What is the purpose of an antenna coupler

Last Answer : It matches the impedance of an antenna to that of a transmission line at any desired frequency.

Horn radiators serve what purpose other than being directional radiators?

Description : Horn radiators serve what purpose other than being directional radiators?

Last Answer : Waveguide impedance matching devices.

Which type of optical splitter (Y-coupler or T-coupler) splits only a small amount of power from the input fiber to one of the output fibers?

Description : Which type of optical splitter (Y-coupler or T-coupler) splits only a small amount of power from the input fiber to one of the output fibers?

Last Answer : T-coupler

Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Description : Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Last Answer : Splice.

Why is the coupler pressurized with nitrogen?

Description : Why is the coupler pressurized with nitrogen?

Last Answer : To aid in heat transfer and prevent corona and arcing

What are the tuning modes for the coupler group discussed?

Description : What are the tuning modes for the coupler group discussed?

Last Answer : Automatic, semiautomatic, and manual.

To measure incident power, you must rotate the coupler detector of the wattmeter so that the arrow indicating power flow points toward which end of the transmission line?

Description : To measure incident power, you must rotate the coupler detector of the wattmeter so that the arrow indicating power flow points toward which end of the transmission line?

Last Answer : Load.

What is the name of the absorbent material used in printers for excess ink?

Description : What is the name of the absorbent material used in printers for excess ink?

Last Answer : Need answer

How are the input and output directional couplers in a twt connected to the helix?

Description : How are the input and output directional couplers in a twt connected to the helix?

Last Answer : The directional couplers are not physically connected to the helix.

The purpose of stacking elements on an antenna. A. Sharper directional pattern B. increased gain C. Improved bandpass D. All of these

Description : The purpose of stacking elements on an antenna. A. Sharper directional pattern B. increased gain C. Improved bandpass D. All of these

Last Answer : D. All of these

Purpose of Directional inverse Over current & earth fault relay; type- CDD

Description : Purpose of Directional inverse Over current & earth fault relay; type- CDD

Last Answer : Directional phase or earth fault protection of ring-mains, parallel transformers, transformer feeders, parallel feeders etc., employing the time graded principle.; This relay comprises an inductive ... induction disc unit. The directional unit is normally provided with voltage polarising coils. 

Is plywood absorbent?

Description : Is plywood absorbent?

Last Answer : Feel Free to Answer

If you have an oily or saturated absorbent pad after refueling at a marina fuel dock what is the best thing to do it?

Description : If you have an oily or saturated absorbent pad after refueling at a marina fuel dock what is the best thing to do it?

Last Answer : Ask the fuel dock staff what to do with it in order to disposeproperly

If you have a oily or saturated absorbent pad after after at a marina dock what is the best thing to do with it?

Description : If you have a oily or saturated absorbent pad after after at a marina dock what is the best thing to do with it?

Last Answer : Ask the fuel dock staff what to do with it in order to disposeproperly

If you have a oily or saturated absorbent pad after refueling at a marina fuel dock what is the best thing to do with it?

Description : If you have a oily or saturated absorbent pad after refueling at a marina fuel dock what is the best thing to do with it?

Last Answer : Ask the fuel dock staff what to do with it in order to dispose properly

Which of the following is an absorbent? A.silica gel B. activated alumina C. both of the mentioned D. none of the mentioned

Description : Which of the following is an absorbent? A.silica gel B. activated alumina C. both of the mentioned D. none of the mentioned

Last Answer : ANSWER : C

Charcoal is used in water treatment as a/an - (1) absorbent (2) coagulant (3) solvent (4) adsorbent

Description : Charcoal is used in water treatment as a/an - (1) absorbent (2) coagulant (3) solvent (4) adsorbent

Last Answer : (4) adsorbent Explanation: Charcoal is used in water treatment as adsorbent.

Low viscosity absorbent is preferred for reasons of (A) Rapid absorption rates and good heat transfer characteristics (B) Improved flooding characteristics (C) Low pressure drop on pumping (D) All (A), (B) and (C)

Description : Low viscosity absorbent is preferred for reasons of (A) Rapid absorption rates and good heat transfer characteristics (B) Improved flooding characteristics (C) Low pressure drop on pumping (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is a suitable absorbent for removal of H2S from natural gas? (A) Vetrocoke solution (B) Monoethanolamine (MEA) (C) Dilute (D) Hot water

Description : Which of the following is a suitable absorbent for removal of H2S from natural gas? (A) Vetrocoke solution (B) Monoethanolamine (MEA) (C) Dilute (D) Hot water

Last Answer : (B) Monoethanolamine (MEA)

. Ethanolamine is an absorbent used for the removal of __________ from air/gas. (A) HF (B) SO2 (C) H2S (D) Both (B) & (C)

Description : . Ethanolamine is an absorbent used for the removal of __________ from air/gas. (A) HF (B) SO2 (C) H2S (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

High noise levels produced during operation of fans and compressors can be reduced by using (A) Mufflers (silencers) (B) Acoustic absorbent (C) Lagging of noisy duct (D) None of these

Description : High noise levels produced during operation of fans and compressors can be reduced by using (A) Mufflers (silencers) (B) Acoustic absorbent (C) Lagging of noisy duct (D) None of these

Last Answer : (A) Mufflers (silencers)

Which is the most efficient absorbent for SO3 out of the following? (A) 20% oleum (B) 65% oleum (C) 78% H2SO4 (D) 98% H2SO4

Description : Which is the most efficient absorbent for SO3 out of the following? (A) 20% oleum (B) 65% oleum (C) 78% H2SO4 (D) 98% H2SO4

Last Answer : (D) 98% H2SO4

Which of the following is commonly used as liquid absorbent?  a. Silica gel  b. Activated alumina  c. Ethylene glycol  d. None of these

Description : Which of the following is commonly used as liquid absorbent?  a. Silica gel  b. Activated alumina  c. Ethylene glycol  d. None of these

Last Answer : Ethylene glycol

Paper is hygroscopic and absorbent. (A) True (B) False

Description : Paper is hygroscopic and absorbent. (A) True (B) False

Last Answer : (A) True

This natural fiber obtained from the stems of a plant of the nettle family has found popularity in modern fibers with a high wet strength, absorbent but dries quickly, it can be spun or woven, has a high rot and mildew resistance and elasticity 50 percent greater than that of CHEM-92; Multiple Choice: What transuranic element is often used in satellites as a source of heat or power? w) Plutonium-238 x) Strontium-90 y) Cesium-137 z) Uranium-235

Description : This natural fiber obtained from the stems of a plant of the nettle family has found popularity in modern fibers with a high wet strength, absorbent but dries quickly, it can be spun or woven, has a high rot ... a source of heat or power? w) Plutonium-238 x) Strontium-90 y) Cesium-137 z) Uranium-235

Last Answer : ANSWER: W -- PLUTONIUM-238

Charcoal is used in water treatment as a/an (1) absorbent (2) coagulant (3) solvent (4) adsorbent

Description : Charcoal is used in water treatment as a/an (1) absorbent (2) coagulant (3) solvent (4) adsorbent

Last Answer : adsorbent

What is a coupler signal ?

Description : What is a coupler signal ?

Last Answer : coupler signal K.

Which one is an antenna coupling unit? A. Coupler B. Diplexer C. Lecher wire D. Duplexer

Description : Which one is an antenna coupling unit? A. Coupler B. Diplexer C. Lecher wire D. Duplexer

Last Answer : B. Diplexer

Not a reason for the use of an antenna coupler. A. To make the antenna look resistive B. To provide the output amplifier with the correct load impedance C. To discriminate against harmonics D. To prevent re-radiation of the local oscillator

Description : Not a reason for the use of an antenna coupler. A. To make the antenna look resistive B. To provide the output amplifier with the correct load impedance C. To discriminate against harmonics D. To prevent re-radiation of the local oscillator

Last Answer : D. To prevent re-radiation of the local oscillator

Referred to as a ferrite device that can be used in lieu of a duplexer to isolate a microwave transmitter and receiver when both are connected to the same antenna. A. Isolator B. Circulator C. Coupler D. Diode.

Description : Referred to as a ferrite device that can be used in lieu of a duplexer to isolate a microwave transmitter and receiver when both are connected to the same antenna. A. Isolator B. Circulator C. Coupler D. Diode.

Last Answer : B. Circulator

A device that connects two dissimilar networks and performs the protocol conversion. A. Gateway B. Coupler C. Transformer D. Converter

Description : A device that connects two dissimilar networks and performs the protocol conversion. A. Gateway B. Coupler C. Transformer D. Converter

Last Answer : A. Gateway

What is an opto-coupler IC?

Description : What is an opto-coupler IC?

Last Answer : Opto-coupler IC is a combined package of a photo-emitting device and a photosensing device.Examples for opto-coupler circuit : LED and a photo diode, LED and photo transistor, LED and Darlington. Examples for opto-coupler IC : MCT 2F , MCT 2E .

When a coupler nut is subjected to crushing stress, crushing failure can be avoided if _____ a. crushing stress induced is more than permissible crushing stress in the nut b. permissible crushing stress is more than crushing stress induced in the threads c. crushing stress induced is equal to permissible crushing stress d. all of the above

Description : When a coupler nut is subjected to crushing stress, crushing failure can be avoided if _____ a. crushing stress induced is more than permissible crushing stress in the nut b. permissible crushing ... threads c. crushing stress induced is equal to permissible crushing stress d. all of the above

Last Answer : b. permissible crushing stress is more than crushing stress induced in the threads

Bus coupler is very essential in arrangement (a) single bus (b) double bus, double breaker (c) main and transfer bus (d) all of the above

Description : Bus coupler is very essential in arrangement (a) single bus (b) double bus, double breaker (c) main and transfer bus (d) all of the above

Last Answer : (c) main and transfer bus

When connector losses, splice losses and coupler losses are added, what is the limiting factor? ∙ A. source power ∙ B. fiber attenuation ∙ C. connector and splice loss ∙ D. detector sensitivity

Description : When connector losses, splice losses and coupler losses are added, what is the limiting factor? ∙ A. source power ∙ B. fiber attenuation ∙ C. connector and splice loss ∙ D. detector sensitivity

Last Answer : D. detector sensitivity

A coupler which consists of a series of lenses and a partly reflective surface ∙ a. Beam-splitting coupler ∙ b. Reflective star coupler ∙ c. Fused coupler ∙ d. None of these

Description : A coupler which consists of a series of lenses and a partly reflective surface ∙ a. Beam-splitting coupler ∙ b. Reflective star coupler ∙ c. Fused coupler ∙ d. None of these

Last Answer : ∙ a. Beam-splitting coupler