Which is the most efficient absorbent for SO3 out of the following? (A) 20% oleum (B) 65% oleum (C) 78% H2SO4 (D) 98% H2SO4

Which is the most efficient absorbent for SO3 out of the following?
(A) 20% oleum
(B) 65% oleum
(C) 78% H2SO4
(D) 98% H2SO4
by

1 Answer

Answer :

(D) 98% H2SO4
by

Related questions

20% oleum means that in 100 kg oleum, there are 20 kg of (A) SO3 and 80kg of H2SO4 (B) H2SO4 and 80kg of SO3 (C) SO3 for each 100 kg of H2SO4 (D) None of these

Description : 20% oleum means that in 100 kg oleum, there are 20 kg of (A) SO3 and 80kg of H2SO4 (B) H2SO4 and 80kg of SO3 (C) SO3 for each 100 kg of H2SO4 (D) None of these

Last Answer : (A) SO3 and 80kg of H2SO4

Pick out the wrong statement. (A) Conversion of SO2 to SO3 in Monsanto-4 pass converter is about 98% (B) The chemical formula of oleum is H2S2O7 , which is formed by saturating sulphuric acid with sulphur trioxide (C) Vitriol oil is nothing but technical sulphuric acid (D) Decomposition of sulphuric acid on heating does not start before its boiling

Description : Pick out the wrong statement. (A) Conversion of SO2 to SO3 in Monsanto-4 pass converter is about 98% (B) The chemical formula of oleum is H2S2O7 , which is formed by saturating ... but technical sulphuric acid (D) Decomposition of sulphuric acid on heating does not start before its boiling

Last Answer : (D) Decomposition of sulphuric acid on heating does not start before its boiling

10% oleum comprises of 10% free (A) SO2 (B) H2SO3 (C) SO3 (D) H2SO4

Description : 10% oleum comprises of 10% free (A) SO2 (B) H2SO3 (C) SO3 (D) H2SO4

Last Answer : (C) SO3

More than 100 percent of __________ is present in oleum. (A) SO3 (B) H2SO4 (C) H2SO3 (D) SO2

Description : More than 100 percent of __________ is present in oleum. (A) SO3 (B) H2SO4 (C) H2SO3 (D) SO2

Last Answer : (B) H2SO4

Sulphuric acid saturated with SO3 is called (A) Concentrated H2SO4 (B) Sulphurous acid (C) Oleum(D) None of these

Description : Sulphuric acid saturated with SO3 is called (A) Concentrated H2SO4 (B) Sulphurous acid (C) Oleum (D) None of these

Last Answer : (C) Oleum

Oleum produces fumes of (A) SO2 (B) H2SO4 (C) SO3 (D) SO2 + H2SO4

Description : Oleum produces fumes of (A) SO2 (B) H2SO4 (C) SO3 (D) SO2 + H2SO4

Last Answer : (C) SO3

Which of the following is an endothermic reaction? (A) Absorption of SO3 in 98% H2SO4 (B) C + H2O = CO + H2 (C) Thermal dissociation of iron pyrites (D) Both (B) and (C)

Description : Which of the following is an endothermic reaction? (A) Absorption of SO3 in 98% H2SO4 (B) C + H2O = CO + H2 (C) Thermal dissociation of iron pyrites (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of concentration ≥ 98% (C) 75% oleum can be produced by distillation of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Description : Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of ... of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Last Answer : (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Desirable "Micum Index" values of metallurgical coke are (A) M40 > 78% and M10 < 10% (B) M40 > 4% and M10 < 80% (C) M40 > 10% and M10 < 78% (D) M40 > 98% and M10 < 2%

Description : Desirable "Micum Index" values of metallurgical coke are (A) M40 > 78% and M10 < 10% (B) M40 > 4% and M10 < 80% (C) M40 > 10% and M10 < 78% (D) M40 > 98% and M10 < 2%

Last Answer : (A) M40 > 78% and M10 < 10%

The catalyst used in the manufacture of DDT (from chloral and chlorobenzene) is (A) Dilute H2SO4 (B) Oleum (C) Ultraviolet light (D) None of these

Description : The catalyst used in the manufacture of DDT (from chloral and chlorobenzene) is (A) Dilute H2SO4 (B) Oleum (C) Ultraviolet light (D) None of these

Last Answer : (B) Oleum

Chemical formula of oleum is (A) H2SO3 (B) H2SO4 (C) H2S2O7 (D) H2SO7

Description : Chemical formula of oleum is (A) H2SO3 (B) H2SO4 (C) H2S2O7 (D) H2SO7

Last Answer : (C) H2S2O7

Concentration of H2SO4 catalyst in alkylation is kept between 90-98%, because H2SO4 having concentration. (A) Less than 90% promotes polymerisation (B) More than 98% promotes cracking (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Concentration of H2SO4 catalyst in alkylation is kept between 90-98%, because H2SO4 having concentration. (A) Less than 90% promotes polymerisation (B) More than 98% promotes cracking (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Reaction of phosphate rock with 98% H2SO4 produces (A) Ortho-phosphoric acid (B) Superphosphate (C) White phosphorous (D) None of these

Description : Reaction of phosphate rock with 98% H2SO4 produces (A) Ortho-phosphoric acid (B) Superphosphate (C) White phosphorous (D) None of these

Last Answer : (A) Ortho-phosphoric acid

SO3 is absorbed using H2SO4 in a (A) Cast iron packed tower (B) Stainless steel plate tower (C) Packed steel tower lined with acid proof bricks (D) None of these

Description : SO3 is absorbed using H2SO4 in a (A) Cast iron packed tower (B) Stainless steel plate tower (C) Packed steel tower lined with acid proof bricks (D) None of these

Last Answer : (C) Packed steel tower lined with acid proof bricks

During manufacture of H2SO4 , the oxidation of SO2 to SO3 by oxygen is an endothermic reaction. The yield of SO3 will be maximised, if the (A) Temperature is increased (B) Pressure is reduced (C) Temperature is increased and pressure is reduced (D) Temperature is reduced and pressure is increased

Description : During manufacture of H2SO4 , the oxidation of SO2 to SO3 by oxygen is an endothermic reaction. The yield of SO3 will be maximised, if the (A) Temperature is increased (B) Pressure is reduced (C) Temperature is increased and pressure is reduced (D) Temperature is reduced and pressure is increased

Last Answer : (D) Temperature is reduced and pressure is increased

Absorption of SO3 in 97% H2SO4 is (A) Exothermic (B) Endothermic (C) Not possible (D) None of these

Description : Absorption of SO3 in 97% H2SO4 is (A) Exothermic (B) Endothermic (C) Not possible (D) None of these

Last Answer : (A) Exothermic

. In contact process, SO3 is absorbed in 97% H2SO4 and not in water, because (A) SO3 gas is sparingly soluble in water (B) Water forms an acid mist, which is difficult to absorb (C) The purity of acid is affected (D) Scale formation in the absorber is to be avoided

Description : . In contact process, SO3 is absorbed in 97% H2SO4 and not in water, because (A) SO3 gas is sparingly soluble in water (B) Water forms an acid mist, which is difficult to absorb (C) The purity of acid is affected (D) Scale formation in the absorber is to be avoided

Last Answer : (B) Water forms an acid mist, which is difficult to absorb

The catalyst used in the manufacture of DDT is (A) Alumina (B) Silica (C) 20% oleum (D) Aluminium chloride

Description : The catalyst used in the manufacture of DDT is (A) Alumina (B) Silica (C) 20% oleum (D) Aluminium chloride

Last Answer : (C) 20% oleum

Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0

Description : Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0

Last Answer : (A) 15-30

. Which of the following reagents will react with furan to form 2-furansulfonic acid? (a) SO3 in pyridine at 100°C (b) Dilute H2SO4 at 200°C (c) SO2 at 100°C (d) Dilute H2SO4 at 100°C

Description : Which of the following reagents will react with furan to form 2-furansulfonic acid? (a) SO3 in pyridine at 100°C (b) Dilute H2SO4 at 200°C (c) SO2 at 100°C (d) Dilute H2SO4 at 100°C

Last Answer : SO3 in pyridine at 100°C

It takes 500 watts to operate a machine whose power output is 480 watts. Which of the following is the efficiency of the machine? Is it w) 20% x) 48% y) 96% z) 98%

Description : It takes 500 watts to operate a machine whose power output is 480 watts. Which of the following is the efficiency of the machine? Is it w) 20% x) 48% y) 96% z) 98%

Last Answer : ANSWER: Y -- 96%

Brother's weight is 25 % more than that of sister. What percent is brother’s weight less than sister's weight? a) 25% b) 60% c) 45% d) 20% e) 98%

Description : Brother's weight is 25 % more than that of sister. What percent is brother’s weight less than sister's weight? a) 25% b) 60% c) 45% d) 20% e) 98% 

Last Answer : Answer: D Let sister's weight be 100 kg. Then brother's weight = (100 + 25) kg = 125 kg If brother's weight is 125 kg, then sister's weight is 100 kg. If brother's weight is 1 kg, then ... then sister's weight = (100/125 100) kg Therefore, sister's weight is 20 % less than that of brother.

What is the starting awareness percentage of a new product? a. 15% b. 65% c. 40% d. 25% e. 20%

Description : What is the starting awareness percentage of a new product? a. 15% b. 65% c. 40% d. 25% e. 20%

Last Answer : d. 25%

Low viscosity absorbent is preferred for reasons of (A) Rapid absorption rates and good heat transfer characteristics (B) Improved flooding characteristics (C) Low pressure drop on pumping (D) All (A), (B) and (C)

Description : Low viscosity absorbent is preferred for reasons of (A) Rapid absorption rates and good heat transfer characteristics (B) Improved flooding characteristics (C) Low pressure drop on pumping (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is a suitable absorbent for removal of H2S from natural gas? (A) Vetrocoke solution (B) Monoethanolamine (MEA) (C) Dilute (D) Hot water

Description : Which of the following is a suitable absorbent for removal of H2S from natural gas? (A) Vetrocoke solution (B) Monoethanolamine (MEA) (C) Dilute (D) Hot water

Last Answer : (B) Monoethanolamine (MEA)

. Ethanolamine is an absorbent used for the removal of __________ from air/gas. (A) HF (B) SO2 (C) H2S (D) Both (B) & (C)

Description : . Ethanolamine is an absorbent used for the removal of __________ from air/gas. (A) HF (B) SO2 (C) H2S (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

High noise levels produced during operation of fans and compressors can be reduced by using (A) Mufflers (silencers) (B) Acoustic absorbent (C) Lagging of noisy duct (D) None of these

Description : High noise levels produced during operation of fans and compressors can be reduced by using (A) Mufflers (silencers) (B) Acoustic absorbent (C) Lagging of noisy duct (D) None of these

Last Answer : (A) Mufflers (silencers)

Pick out the wrong statement. (A) DDT is manufactured by the condensation of chlorobenzene with chloral at 30°C in presence of oleum, which is a highly exothermic reaction (B) Chloral is obtained by the chlorination of ethyl alcohol (C) Insecticides acting on the insects through the respiratory system are called fumigants (D) Benzene hexachloride is not a contact insecticide

Description : Pick out the wrong statement. (A) DDT is manufactured by the condensation of chlorobenzene with chloral at 30°C in presence of oleum, which is a highly exothermic reaction (B) Chloral ... through the respiratory system are called fumigants (D) Benzene hexachloride is not a contact insecticide

Last Answer : (D) Benzene hexachloride is not a contact insecticide

Steel tower used for the storage of oleum (A) Is lined with lead (B) Need not be lined

Description : Steel tower used for the storage of oleum (A) Is lined with lead (B) Need not be lined

Last Answer : (B) Need not be lined

Sulphuric acid solution having a specific gravity of 1.20 at room temperature is used mainly for the (A) Fertiliser manufacture (B) Car battery solution (C) Synthesis of oleum (D) Water treatment

Description : Sulphuric acid solution having a specific gravity of 1.20 at room temperature is used mainly for the (A) Fertiliser manufacture (B) Car battery solution (C) Synthesis of oleum (D) Water treatment

Last Answer : (B) Car battery solution

Transportation of 35% oleum during winter suffers from the problem of freezing, which can be overcome by the addition of small quantity of (A) Nitric acid (B) Hydrochloric acid (C) Methyl alcohol (D) Formic acid

Description : Transportation of 35% oleum during winter suffers from the problem of freezing, which can be overcome by the addition of small quantity of (A) Nitric acid (B) Hydrochloric acid (C) Methyl alcohol (D) Formic acid

Last Answer : (A) Nitric acid

Sulphuric acid completely saturated with sulphur trioxide is called (A) Concentrated sulphuric acid (B) Oleum (C) Sulphurous acid (D) Dilute sulphuric acid

Description : Sulphuric acid completely saturated with sulphur trioxide is called (A) Concentrated sulphuric acid (B) Oleum (C) Sulphurous acid (D) Dilute sulphuric acid

Last Answer : (A) Concentrated sulphuric acid

What happens, when SO2is passed through a solution of H2S in water? (A) Precipitation of sulphur takes place (B) H2SO3is formed (C) Oleum is formed (D) None of these

Description : What happens, when SO2is passed through a solution of H2S in water? (A) Precipitation of sulphur takes place (B) H2SO3is formed (C) Oleum is formed (D) None of these

Last Answer : (A) Precipitation of sulphur takes place

Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation

Description : Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation

Last Answer : (B) Achieves an yield of 95-98% based on ethylene

The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel

Description : The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel

Last Answer : (B) Lead

In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Description : In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Last Answer : (B) Cast iron

Acetone is to be removed from air in an isothermal dilute absorber using pure water as solvent. The incoming air contains 5 mole% of acetone (yin = 0.05). The design equation to be used for obtaining the number of trays (N) of the absorber is, N+2 = 6 log (yin /yout ).For 98% recovery of acetone, the number of trays required is/are: (A) 4 (B) 8 (C) 9 (D) 10

Description : Acetone is to be removed from air in an isothermal dilute absorber using pure water as solvent. The incoming air contains 5 mole% of acetone (yin = 0.05). The design equation to be used for obtaining the number of trays ( ... of acetone, the number of trays required is/are: (A) 4 (B) 8 (C) 9 (D) 10

Last Answer : (C) 9

How can I evaluate the thermal relief requirements for double block-in of 98% sulfuric acid?

Description : How can I evaluate the thermal relief requirements for double block-in of 98% sulfuric acid?

Last Answer : API RP520 gives equations to calculate relief requirements. For thermal relief, a very simple formula requires the heat input and the coefficient of thermal expansion of the liquid. The heat input could be ... it will sit dead headed for any significant period. Just a small bleed will be enough.

What is the name of the absorbent material used in printers for excess ink?

Description : What is the name of the absorbent material used in printers for excess ink?

Last Answer : Need answer

Is plywood absorbent?

Description : Is plywood absorbent?

Last Answer : Feel Free to Answer

If you have an oily or saturated absorbent pad after refueling at a marina fuel dock what is the best thing to do it?

Description : If you have an oily or saturated absorbent pad after refueling at a marina fuel dock what is the best thing to do it?

Last Answer : Ask the fuel dock staff what to do with it in order to disposeproperly

If you have a oily or saturated absorbent pad after after at a marina dock what is the best thing to do with it?

Description : If you have a oily or saturated absorbent pad after after at a marina dock what is the best thing to do with it?

Last Answer : Ask the fuel dock staff what to do with it in order to disposeproperly

If you have a oily or saturated absorbent pad after refueling at a marina fuel dock what is the best thing to do with it?

Description : If you have a oily or saturated absorbent pad after refueling at a marina fuel dock what is the best thing to do with it?

Last Answer : Ask the fuel dock staff what to do with it in order to dispose properly

Which of the following is an absorbent? A.silica gel B. activated alumina C. both of the mentioned D. none of the mentioned

Description : Which of the following is an absorbent? A.silica gel B. activated alumina C. both of the mentioned D. none of the mentioned

Last Answer : ANSWER : C

Charcoal is used in water treatment as a/an - (1) absorbent (2) coagulant (3) solvent (4) adsorbent

Description : Charcoal is used in water treatment as a/an - (1) absorbent (2) coagulant (3) solvent (4) adsorbent

Last Answer : (4) adsorbent Explanation: Charcoal is used in water treatment as adsorbent.

Which of the following is commonly used as liquid absorbent?  a. Silica gel  b. Activated alumina  c. Ethylene glycol  d. None of these

Description : Which of the following is commonly used as liquid absorbent?  a. Silica gel  b. Activated alumina  c. Ethylene glycol  d. None of these

Last Answer : Ethylene glycol

What is the purpose of the absorbent material in a directional coupler?

Description : What is the purpose of the absorbent material in a directional coupler?

Last Answer : Absorb the energy not directed at the pick-up probe and a portion of the overall energy

Paper is hygroscopic and absorbent. (A) True (B) False

Description : Paper is hygroscopic and absorbent. (A) True (B) False

Last Answer : (A) True

This natural fiber obtained from the stems of a plant of the nettle family has found popularity in modern fibers with a high wet strength, absorbent but dries quickly, it can be spun or woven, has a high rot and mildew resistance and elasticity 50 percent greater than that of CHEM-92; Multiple Choice: What transuranic element is often used in satellites as a source of heat or power? w) Plutonium-238 x) Strontium-90 y) Cesium-137 z) Uranium-235

Description : This natural fiber obtained from the stems of a plant of the nettle family has found popularity in modern fibers with a high wet strength, absorbent but dries quickly, it can be spun or woven, has a high rot ... a source of heat or power? w) Plutonium-238 x) Strontium-90 y) Cesium-137 z) Uranium-235

Last Answer : ANSWER: W -- PLUTONIUM-238

Charcoal is used in water treatment as a/an (1) absorbent (2) coagulant (3) solvent (4) adsorbent

Description : Charcoal is used in water treatment as a/an (1) absorbent (2) coagulant (3) solvent (4) adsorbent

Last Answer : adsorbent