Low viscosity absorbent is preferred for reasons of (A) Rapid absorption rates and good heat transfer characteristics (B) Improved flooding characteristics (C) Low pressure drop on pumping (D) All (A), (B) and (C)

Low viscosity absorbent is preferred for reasons of
(A) Rapid absorption rates and good heat transfer characteristics
(B) Improved flooding characteristics
(C) Low pressure drop on pumping
(D) All (A), (B) and (C)
by

1 Answer

Answer :

(D) All (A), (B) and (C)
by

Related questions

For gas absorption, low viscosity solvents are preferred, because of their (A) Better flow characteristics (B) Low pumping pressure drop (C) Rapid absorption rates(D) All (A), (B) and (C)

Description : For gas absorption, low viscosity solvents are preferred, because of their (A) Better flow characteristics (B) Low pumping pressure drop (C) Rapid absorption rates (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments (B) Pressure drop in the equipment will be very high (C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Description : Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the ... C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Last Answer : (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments

Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the possibility of tower wall collapse (B) Packed towers are preferred over plate towers for handling corrosive and foamy liquids (C) Diameter of randomly packed tower is normally more than 1.2 metres (D) Due to uneven supply and improper distribution of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Description : Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the ... of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Last Answer : (C) Diameter of randomly packed tower is normally more than 1.2 metres

Fuel oil is subjected to visbreaking to reduce its (A) Pour point (B) Viscosity (C) Pressure drop on pumping (D) All (A), (B) and (C

Description : Fuel oil is subjected to visbreaking to reduce its (A) Pour point (B) Viscosity (C) Pressure drop on pumping (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced) (C) It decomposes on further increasing the temperature (D) None of these

Description : During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on ... be further reduced) (C) It decomposes on further increasing the temperature (D) None of these

Last Answer : (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced)

Pick out the correct statement. (A) For identical gas flow rates, less pressure drop occurs through a plate tower than through a packed tower (B) Plate column can handle greater liquid loads without flooding than packed column, but the liquid hold up is more in the case of plate column (C) For the same duty, plate columns weigh less than packed columns (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) For identical gas flow rates, less pressure drop occurs through a plate tower than through a packed tower (B) Plate column can handle greater liquid loads without flooding than packed ... duty, plate columns weigh less than packed columns (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot be recovered by distillation (C) Its recovery cost by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Description : The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot ... by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Last Answer : (C) Its recovery cost by distillation may be prohibitively high

Flooding in a column results due to (A) High pressure drop (B) Low pressure drop (C) Low velocity of the liquid (D) High temperature

Description : Flooding in a column results due to (A) High pressure drop (B) Low pressure drop (C) Low velocity of the liquid (D) High temperature

Last Answer : (A) High pressure drop

For construction of structures in sea water, the cement generally preferred to, is (A) Portland-pozzolana cement (B) Quick setting cement (C) Low heat Portland cement (D) Rapid hardening cement

Description : For construction of structures in sea water, the cement generally preferred to, is (A) Portland-pozzolana cement (B) Quick setting cement (C) Low heat Portland cement (D) Rapid hardening cement

Last Answer : Answer: Option A

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

Multipass heat exchangers are used (A) Because of simplicity of fabrication (B) For low heat load (C) To obtain higher heat transfer co-efficient and shorter tube (D) To reduce the pressure drop

Description : Multipass heat exchangers are used (A) Because of simplicity of fabrication (B) For low heat load (C) To obtain higher heat transfer co-efficient and shorter tube (D) To reduce the pressure drop

Last Answer : (C) To obtain higher heat transfer co-efficient and shorter tube

Extremely large or small volumes of fluids are generally best routed through the shell side of a shell and tube heat exchanger, because of the (A) Less corrosion problems (B) Flexibility possible in the baffle arrangement (C) Low pressure drop (D) High heat transfer co-efficient

Description : Extremely large or small volumes of fluids are generally best routed through the shell side of a shell and tube heat exchanger, because of the (A) Less corrosion problems (B) Flexibility possible in the baffle arrangement (C) Low pressure drop (D) High heat transfer co-efficient

Last Answer : (B) Flexibility possible in the baffle arrangement

In a shell and tube heat exchanger, floating head is used for (A) Large temperature differentials (B) High heat transfer co-efficient (C) Low pressure drop (D) Less corrosion of tubes

Description : In a shell and tube heat exchanger, floating head is used for (A) Large temperature differentials (B) High heat transfer co-efficient (C) Low pressure drop (D) Less corrosion of tubes

Last Answer : (A) Large temperature differentials

Under conditions of flooding in packed tower, the gas pressure drop (A) Decreases rapidly (B) Increases rapidly (C) Remain constant (D) Is maximum

Description : Under conditions of flooding in packed tower, the gas pressure drop (A) Decreases rapidly (B) Increases rapidly (C) Remain constant (D) Is maximum

Last Answer : (D) Is maximum

Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a distillation column (C) Separation of components is not possible in liquid extraction, if selectivity is unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Description : Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a ... unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Last Answer : (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Flooding in a vapor-liquid contacting equipment occurs in a tray, when the pressure drop through a tray is __________ the liquid head available in the downcomer. (A) Less than (B) More than (C) Same as (D) Very much less

Description : Flooding in a vapor-liquid contacting equipment occurs in a tray, when the pressure drop through a tray is __________ the liquid head available in the downcomer. (A) Less than (B) More than (C) Same as (D) Very much less

Last Answer : (B) More than

Flooding in a distillation column is detected by a sharp (A) Increase in Murphree plate efficiency (B) Decrease in pressure drop (C) Decrease in liquid hold up in the column (D) Increase in pressure drop

Description : Flooding in a distillation column is detected by a sharp (A) Increase in Murphree plate efficiency (B) Decrease in pressure drop (C) Decrease in liquid hold up in the column (D) Increase in pressure drop

Last Answer : (D) Increase in pressure drop

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

Very tall packed towers are divided into series of beds to (A) Reduce the overall pressure drop (B) Avoid channelling (C) Reduce liquid hold-up (D) Avoid flooding

Description : Very tall packed towers are divided into series of beds to (A) Reduce the overall pressure drop (B) Avoid channelling (C) Reduce liquid hold-up (D) Avoid flooding

Last Answer : (B) Avoid channelling

The main reason for dividing a tall packed tower into series of small towers is to (A) Minimise the overall pressure drop (B) Avoid flooding (C) Reduce liquid hold up (D) Avoid channelling

Description : The main reason for dividing a tall packed tower into series of small towers is to (A) Minimise the overall pressure drop (B) Avoid flooding (C) Reduce liquid hold up (D) Avoid channelling

Last Answer : (D) Avoid channelling

Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure vessel used for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Description : Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure ... for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Last Answer : (B) High cost of the high pressure vessel used for the reactor

Shell side pressure drop in a shell and tube heat exchanger does not depend upon the (A) Baffle spacing & shell diameter (B) Tube diameter & pitch (C) Viscosity, density & mass velocity of shell side fluid (D) None of these

Description : Shell side pressure drop in a shell and tube heat exchanger does not depend upon the (A) Baffle spacing & shell diameter (B) Tube diameter & pitch (C) Viscosity, density & mass velocity of shell side fluid (D) None of these

Last Answer : (D) None of these

Due to which of the following reasons the cables should not be operated too hot ? (a) The oil may loose its viscosity and it may start drawing off from higher levels (b) Expansion of the oil may cause the sheath to burst (c) Unequal expansion may create voids in the insulation which will lead to ionization (d) The thermal instability may rise due to the rapid increase of dielectric losses with temperature (e) All of the above

Description : Due to which of the following reasons the cables should not be operated too hot ? (a) The oil may loose its viscosity and it may start drawing off from higher levels (b) Expansion of the ... instability may rise due to the rapid increase of dielectric losses with temperature (e) All of the above

Last Answer : (e) All of the above

Which of the following is an undesirable characteristic for the solvent used in gas absorption? (A) Low vapor pressure (B) Low viscosity (C) High gas solubility (D) None of these

Description : Which of the following is an undesirable characteristic for the solvent used in gas absorption? (A) Low vapor pressure (B) Low viscosity (C) High gas solubility (D) None of these

Last Answer : (D) None of these

Heat transfer efficiency leading of energy conservation in a heat exchanger can be achieved by (A) Keeping the heat transfer surface clean (B) Enhancing the fluid pumping rate (C) Increasing the tube length (D) None of these

Description : Heat transfer efficiency leading of energy conservation in a heat exchanger can be achieved by (A) Keeping the heat transfer surface clean (B) Enhancing the fluid pumping rate (C) Increasing the tube length (D) None of these

Last Answer : (A) Keeping the heat transfer surface clean

The advantage of backward feed multiple effect evaporators over forward feed units is that (A) Heat sensitive material can be handled (B) There is no additional cost of pumping (C) Most concentrated liquid is at highest temperature (D) Equal heat transfer co-efficients exist in various effects

Description : The advantage of backward feed multiple effect evaporators over forward feed units is that (A) Heat sensitive material can be handled (B) There is no additional cost of pumping ... liquid is at highest temperature (D) Equal heat transfer co-efficients exist in various effects

Last Answer : (C) Most concentrated liquid is at highest temperature

Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Description : Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Last Answer : (B) Gear

Double pipe heat exchangers are preferably useful, when (A) High viscosity liquid is to be cooled (B) Requirement of heat transfer area is low (C) Overall heat transfer co-efficient is very high (D) A corrosive liquid is to be heated

Description : Double pipe heat exchangers are preferably useful, when (A) High viscosity liquid is to be cooled (B) Requirement of heat transfer area is low (C) Overall heat transfer co-efficient is very high (D) A corrosive liquid is to be heated

Last Answer : (B) Requirement of heat transfer area is low

Minimum possible diameter of a packed column is decided mainly bythe(A) Flooding(B) Gas viscosity(C) Liquid density(D) Liquid hold up

Description : Minimum possible diameter of a packed column is decided mainly bythe (A) Flooding (B) Gas viscosity (C) Liquid density (D) Liquid hold up

Last Answer : (A) Flooding

Optimum economic pipe diameter for fluid is determined by the (A) Viscosity of the fluid (B) Density of the fluid (C) Total cost considerations (pumping cost plus fixed cost of the pipe) (D) None of these

Description : Optimum economic pipe diameter for fluid is determined by the (A) Viscosity of the fluid (B) Density of the fluid (C) Total cost considerations (pumping cost plus fixed cost of the pipe) (D) None of these

Last Answer : (C) Total cost considerations (pumping cost plus fixed cost of the pipe)

Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available (B) One of the liquid components is heat sensitive (C) Viscosity of liquid components is very high (D) One of the liquid components has very high affinity towards the solvent

Description : Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available ... very high (D) One of the liquid components has very high affinity towards the solvent

Last Answer : (D) One of the liquid components has very high affinity towards the solvent

Back-trapping in a distillation column (A) Increases tray efficiency (B) Decreases tray efficiency (C) Reduces pressure drop (D) Is desirable, as it provides improved vapour-liquid contact

Description : Back-trapping in a distillation column (A) Increases tray efficiency (B) Decreases tray efficiency (C) Reduces pressure drop (D) Is desirable, as it provides improved vapour-liquid contact

Last Answer : (B) Decreases tray efficiency

Which of the following parameters of the fluid is not very important, while deciding its route in a shell and tube heat exchanger? (A) Corrosiveness & fouling characteristics (B) Pressure (C) Viscosity (D) Density

Description : Which of the following parameters of the fluid is not very important, while deciding its route in a shell and tube heat exchanger? (A) Corrosiveness & fouling characteristics (B) Pressure (C) Viscosity (D) Density

Last Answer : (D) Density

In an absorption column, the flooding velocity for random packing is __________ that for stacked/regular packing. (A) Greater than (B) Smaller than (C) Equal to (D) Either (A), or (B); depends on the type of packing

Description : In an absorption column, the flooding velocity for random packing is __________ that for stacked/regular packing. (A) Greater than (B) Smaller than (C) Equal to (D) Either (A), or (B); depends on the type of packing

Last Answer : (B) Smaller than

Which one is preferred for aircraft engine? (A) High viscosity index lube oil (B) Low viscosity index lube oil (C) High freezing point aviation fuel (D) None of these

Description : Which one is preferred for aircraft engine? (A) High viscosity index lube oil (B) Low viscosity index lube oil (C) High freezing point aviation fuel (D) None of these

Last Answer : (A) High viscosity index lube oil

Film boiling is usually not desired in commercial equipments, because (A) The heat transfer rate is low in view of the large temperature drop (B) It is difficult to maintain (C) It is not economic (D) None of these

Description : Film boiling is usually not desired in commercial equipments, because (A) The heat transfer rate is low in view of the large temperature drop (B) It is difficult to maintain (C) It is not economic (D) None of these

Last Answer : (A) The heat transfer rate is low in view of the large temperature drop

For a fluid flowing in an annulus space, the wetted perimeter for heat transfer and pressure drop are (A) Same (B) Different (C) Never different (D) Linearly related

Description : For a fluid flowing in an annulus space, the wetted perimeter for heat transfer and pressure drop are (A) Same (B) Different (C) Never different (D) Linearly related

Last Answer : (B) Different

Pick out the wrong statement. (A) Heat transfer by radiation cannot occur across an absolute volume (B) In case of a shell and tube heat exchanger, the pressure drop through the shell is proportional to the number of times the fluid crosses the bundle between baffles (C) Propagation velocity for travel of heat radiation through vacuum is equal to the velocity of the light (D) The amount of heat involved in the condensation or vaporisation of 1 kg of a fluid is the same

Description : Pick out the wrong statement. (A) Heat transfer by radiation cannot occur across an absolute volume (B) In case of a shell and tube heat exchanger, the pressure drop through the shell is ... The amount of heat involved in the condensation or vaporisation of 1 kg of a fluid is the same

Last Answer : (A) Heat transfer by radiation cannot occur across an absolute volume

The equivalent diameter for pressure drop is __________ that for heat transfer. (A) Smaller than (B) Greater than (C) Equal to (D) Not related with

Description : The equivalent diameter for pressure drop is __________ that for heat transfer. (A) Smaller than (B) Greater than (C) Equal to (D) Not related with

Last Answer : (A) Smaller than

Which of the following parameters is increased by use of finned tube in a multipass shell and tube heat exchanger? (A) Tube side pressure drop and the heat transfer rate (B) Convective heat transfer co-efficient (C) Effective tube surface area for convective heat transfer (D) All (A) (B) and (C)

Description : Which of the following parameters is increased by use of finned tube in a multipass shell and tube heat exchanger? (A) Tube side pressure drop and the heat transfer rate (B) Convective heat transfer co-efficient (C) Effective tube surface area for convective heat transfer (D) All (A) (B) and (C)

Last Answer : (D) All (A) (B) and (C)

The advantage of using a 1 - 2 shell and tube heat exchanger over a 1 - 1 shell and tube heat exchanger is (A) Lower tube side pressure drop (B) Lower shell side pressure drop (C) Higher tube side heat transfer co-efficient (D) Higher shell side heat transfer co-efficient

Description : The advantage of using a 1 - 2 shell and tube heat exchanger over a 1 - 1 shell and tube heat exchanger is (A) Lower tube side pressure drop (B) Lower shell side pressure drop (C) Higher tube side heat transfer co-efficient (D) Higher shell side heat transfer co-efficient

Last Answer : (C) Higher tube side heat transfer co-efficient

For the same heat load and mass flow rate in the tube side of a shell and tube heat exchanger, one may use multipass on the tube side, because it (A) Decreases the pressure drop (B) Decreases the outlet temperature of cooling medium (C) Increases the overall heat transfer coefficient (D) None of these

Description : For the same heat load and mass flow rate in the tube side of a shell and tube heat exchanger, one may use multipass on the tube side, because it (A) Decreases the pressure drop (B) ... the outlet temperature of cooling medium (C) Increases the overall heat transfer coefficient (D) None of these

Last Answer : (C) Increases the overall heat transfer coefficient

Succinylcholine is the preferred muscle relaxant for tracheal intubation because: A. It produces rapid and complete paralysis of respiratory muscles with quick recovery B. It does not alter heart rate or blood pressure C. It does not cause histamine release D. It does not produce postoperative muscle soreness

Description : Succinylcholine is the preferred muscle relaxant for tracheal intubation because: A. It produces rapid and complete paralysis of respiratory muscles with quick recovery B. It does not alter heart rate or ... C. It does not cause histamine release D. It does not produce postoperative muscle soreness

Last Answer : A. It produces rapid and complete paralysis of respiratory muscles with quick recovery

This natural fiber obtained from the stems of a plant of the nettle family has found popularity in modern fibers with a high wet strength, absorbent but dries quickly, it can be spun or woven, has a high rot and mildew resistance and elasticity 50 percent greater than that of CHEM-92; Multiple Choice: What transuranic element is often used in satellites as a source of heat or power? w) Plutonium-238 x) Strontium-90 y) Cesium-137 z) Uranium-235

Description : This natural fiber obtained from the stems of a plant of the nettle family has found popularity in modern fibers with a high wet strength, absorbent but dries quickly, it can be spun or woven, has a high rot ... a source of heat or power? w) Plutonium-238 x) Strontium-90 y) Cesium-137 z) Uranium-235

Last Answer : ANSWER: W -- PLUTONIUM-238

A good solvent used for absorption should not have very high (A) Viscosity (B) Vapor pressure (C) Freezing point (D) All (A), (B) & (C)

Description : A good solvent used for absorption should not have very high (A) Viscosity (B) Vapor pressure (C) Freezing point (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

In continuous filtration (at a constant pressure drop), filtrate flow rate varies inversely as the (A) Square root of the velocity (B) Square of the viscosity (C) Filtration time only (D) Washing time only

Description : In continuous filtration (at a constant pressure drop), filtrate flow rate varies inversely as the (A) Square root of the velocity (B) Square of the viscosity (C) Filtration time only (D) Washing time only

Last Answer : (A) Square root of the velocity

A gas (density = 1.5 kg/m3 , viscosity = 2 × 10 ‒5 kg/m.s) flowing through a packed bed (particle size = 0.5 cm, porosity = 0.5) at a superficial velocity of 2 m/s causes a pressure drop of 8400 Pa/m. The pressure drop for another gas, with density of 1.5 kg/m3and viscosity of 3 × 10 ‒5kg/m.s flowing at 3 m/s will be (A) 8400 Pa/m (B) 12600 Pa/m (C) 18900 Pa/m (D) 16800 Pa/m

Description : A gas (density = 1.5 kg/m3 , viscosity = 2 10 -5 kg/m.s) flowing through a packed bed (particle size = 0.5 cm, porosity = 0.5) at a superficial velocity of 2 m/s causes a pressure drop of 8400 Pa/m. The ... flowing at 3 m/s will be (A) 8400 Pa/m (B) 12600 Pa/m (C) 18900 Pa/m (D) 16800 Pa/m

Last Answer : (B) 12600 Pa/m

Reynolds number for water flow through a tube of I.D. 5 cm is 1500. If a liquid of 5 centipoise viscosity and 0.8 specific gravity flows in the same pipe at the same velocity, then the pressure drop will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient to predict pressure drop

Description : Reynolds number for water flow through a tube of I.D. 5 cm is 1500. If a liquid of 5 centipoise viscosity and 0.8 specific gravity flows in the same pipe at the same velocity, then the pressure drop will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient to predict pressure drop

Last Answer : (A) Increase

For the same terminal conditions and valve size, the pressure drop in a fully opened globe valve as compared to that in a gate valve is (A) More (B) Less (C) Equal (D) Either (A) or (B); depends on the viscosity of the fluid

Description : For the same terminal conditions and valve size, the pressure drop in a fully opened globe valve as compared to that in a gate valve is (A) More (B) Less (C) Equal (D) Either (A) or (B); depends on the viscosity of the fluid

Last Answer : (A) More

For laminar flow of Newtonian fluids through a circular pipe, for a given pressure drop and length & diameter of pipe, the velocity of fluid is proportional to (where, μ = fluid viscosity ) (A) μ (B) 1/μ (C) √μ (D) 1/√μ

Description : For laminar flow of Newtonian fluids through a circular pipe, for a given pressure drop and length & diameter of pipe, the velocity of fluid is proportional to (where, μ = fluid viscosity ) (A) μ (B) 1/μ (C) √μ (D) 1/√μ

Last Answer : (B) 1/μ